Serious problem with blackberry 9300 Curve handset and denial from BB to replace the same, under warranty.

Dear Blackberry Authorities,
It is really a horrible experience with the handset of blackberry for me. I have purchased blackberry Curve handset 9300 on 22nd April from a "Phone Store”, Shop No.78,79,community centre, New friends colony, New Delhi, The Invoice No. is 319,The details of the handset are as follows:
Handset: Blackberry Curve 9300 1256-India Qwerty-Pink
Name: Blackberry 9300: ETA-716/2010/WRLO
Model: RDA71UW
It has been more than just three months ,when i purchased this handset ,It worked fine for about only fifty days from the date of purchase and from the second month ,to my shock, serious problem started in the handset and some time it was getting hanged ,sometime some keys in the keypad did not work ,some time it was getting hanged the moment I receive incoming call., sometime sms sending problem, some time some other problem ..Every time I used to switch off the phone and start again, then it used to work but after some days again there were some other problem occurring in the handset.
The phone was not getting connected to PC from the starting, and i have tried so many times but i fail to get success.
Many a times when I used t send sms the entire alphabet typed on sms has gone separately as a single alphabet in a particular sms to the recipient, causing embarrassment for me in my organization. I would blame the black berry for this embarrassment as this has caused due to faulty phone they have sold me,
I am service class person and i get occupied with my work at office in the day hours and doesn’t have time to go to the service centre of blackberry every time the problem occurs, as there are only one service centre available in Delhi at Lajpat Nagar.The service centre is about 20 Kilometers away from the area my office is situated, I managed to keep the phone running by switching off and switching on after one or two minutes, every time the problem occurs but in the first week of last month ,when the problem started continuing  after  switching off and switching on also ,I was bound to go to service centre at noida since it is close to my place (about 14 Km) in comparison of Lajpat nagar at new delhi,the service engineer at blackberry service centre saw my phone and said there is some software problem which can be rectified by reinstalling the software, and there are some hardware problem also (some keys on the keypad is not et. all working) ,for which i have to surrender my phone to them and they will send it to the Blackberry Office (they did not give address) and it would take 15 days  at least ,thus since I had no back up phone and my each and every contact no. was there in phone it was difficult for me to give them handset at that time ,so I requested them to rectify the software problem by re installing the same.
I asked the service manager to get the backup of all the data and contact no saved into the phone, but they refused to do so and they asked me to go to some other shop nearby to get the data backup, I went to that shop and they asked 250 Rupees for data backup of my phone. I was bound to say yes to them for the amount the charge for backup .I gave them my handset and after 20-30 minutes they came back to me by saying, we cannot store your data backup as it is not connecting to PC. It was a highly disappointing reply for me.
Then i again went to your service centre and written down some important contact no.(the number which was stored on phone book) on piece of paper  and taken out my SD card ,and gave them handset for re installing the same.
They gave me my handset after one and half hour and said" now it would work fine except hardware problem.".I came back and to my utter shock again after two three days handset was into its old condition ,then also I tried to manage with handset and when i could spare sometime I went to your service centre again on 24th July at Noida,
they took the phone and said it would take 12-15 days to return the handset after rectifying the problem,when i requested them to change the handset with a new handset which is at least in good working condition , they clarified that if the hardware problem is not manageable or repairable ,i would get new handset had no option except to give them handset for rectifying the problem.
Now,It is the time for a biggest shock from blackberry people-Today on 3rd August ,i have received a call from noida blackberry service centre to inform me that my handset cannot get repaired under standard warranty conditions of blackberry as there are some moisture into the phone and there is no warranty if there is a moisture inside the phone.
Thus now i wish to inform all the concerned ,Blackberry/Research in Motion ,managers/authorities ,that i have explained above ,all the things ,happened to me in last three months of my purchase of handset, in detail ,so i would again request to Blackberry/Research in Motion ,managers/authorities, to rectify the problem of my handset or change the entire handset so that I can use the same peacefully and should not roam around the service center of blackberry.
Giving this lame excuse that "there is a moisture inside the handset and thus it can’t get repaired or changed under warranty " is a clear case of cheating and harassing the customer, I have bought the handset to use it for my communication purpose not to roam around the blackberry service center nor to put water or moisture inside the handset and play with the handset and fight with all of you.
If there were some moisture inside the handset then that should have been seen by the noida service centre people also during my First visit itself by them and they would have refused taking the handset for repair. They did not refuse but accepted handset and reinstalled software also, If there was some moisture that would have been seen by them that time only.
In my second visit also the took my phone and seen the inside condition also of handset in front of me ,they did not see any moisture, that time also ,and now after 10 odd days ,there are some moisture inside the phone??????.
I have no idea how blackberry keeps its handset ,which has come to them for repairing ,but if there is any trace of moisture into my handset ,that would have come into the handset ,during these 10 days only when phone was with blackberry authorized service engineers for repair purpose. What I know is that My Blackberry handset is under warranty and it is not working properly thus it should be replaced by Blackberry.
On the keypad if some key are not working that is a hardware problem which was there in the handset and it has no connection with the moisture.
If this is the way blackberry is treating its customer, i would say it is harassing its customer, and does not want to rectify the problem .in this case, I would have no option left except to go to the consumer court in Indian judiciary system. And moreover i would inform my and other friends, organizational employee also not to use services/or buy blackberry handset if this is the way BB is treating its customer.
I would request all the concerned persons/managers/authorities of Blackberry/Research in Motion, take action into my case urgently and rectify the core problem into my handset instead of giving lame excuses, and change the faulty handset of mine with a new properly working handset under warranty condition.
Best Regards
Asim
Edit: Personal information removed. At no time should you provide any personal information to any other community member. Please review the Community Terms & Conditions and Support Community Guidelines for additional information.

dubem747 wrote:
It looks like your phone has a some virus, use your computer to scan and remove it.
not possible for it to have a virus and a PC would not know how to scan the OS as its protected
Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
BESAdmin's, please make a signature with your BES environment info.
SIM Free BlackBerry Unlocking FAQ
Follow me on Twitter @knottyrope
Want to thank me? Buy my KnottyRope App here
BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

Similar Messages

  • Help me please : Serious problems with collection-mapping, list-mapping and map-mappi

    Hi everybody;
    I have serious problems with list-mapping, collection-mapping and map-mapping.
    Acording to specifications and requirements in a system I am working on it is needed to
    get a "list" of values or an indivudual value.I am working with ORACLE 9i Database,
    ORACLE 9i AS and ORACLE 9i JDEVELOPER.
    I tried to map a master-detail relationship in an entity-bean, using list-mapping.
    And this was very useful in order to get a "list" of details, ...but, when I wanted
    to get a single value I have some problems with persistence, something about "saving a state"
    despite I just want to get the value of a single detail.
    I decided to change it to map-mapping and the problem related with a single detail
    worked successfully, but I can get access to the whole bunch of details.
    May anyone of you help me with that?
    I am very confused I do not know what to do.
    Have any of you a solution for that problem?
    Thank you very much.

    Have you tried a restore in iTunes?

  • Last update for OS 10.8.2 caused big problems with HP photosmart B110 printer /scanner cannot scan does anyone have the same problem or a solution?

    Last update for OS 10.8.2 caused big problems with HP photosmart B110 printer /scanner cannot scan does anyone have the same problem or a solution?
    iMac is connected via wirelss to printer/scanner. All was working OK until update.

    Assuming that the HP software is up-to-date, but still not working, have you tried Image Capture in the Applications folder. Does that work?

  • I have bought a IPhone 4 from Malaysia, my home button is not working. I want to replace the phone under warranty but all service centres mention that its country specific and I need to get it replaced only at malaysia. Can anyone guide me what to do????

    I have bought a IPhone 4 from Malaysia, my home button is not working. I want to replace the phone under warranty but all service centres mention that its country specific and I need to get it replaced only at malaysia. Can anyone guide me what to do????

    The iPhone warranty is not international and as you purchased in
    Malaysia the warranty is only valid in Malaysia
    You could try taking to an iPhone Authorised service provider
    in India but there have been many similar posts to yours
    and I am not aware  of them assisting  with an iPhone from
    outside India

  • Since upgrading, both our wireless printers are still visible, but OSX will not connect with them.  Both work via connecting from other sources via the same wireless router (airport).  What do I need to do to get my printing/scanning working again?

    Since upgrading, both our wireless printers are still visible, but OSX will not connect with them.  Both work via connecting from other sources via the same wireless router (airport).  What do I need to do to get my printing/scanning working again?

    First thing to try is reset Printing System:
    OS X Mavericks: Reset the printing system
    Next would be reset the router (power off 15 secs then back on). And, 2 minutes later, reset the printers 1 by 1.

  • My iphone 4s wont switch on or reset. i spoke to apple earier and they will replace the phone under warranty. i didnt back up my phone on itunes or icloud. as the phone will not switch on i am unable to do this now. any ideas how i can get these off?

    My iphone 4s will not switch on. Supposidly it has been "charging" all day and stll it does not have enough life to switch on. Rang Apple this morning and they will replace the phone under warrenty free of charge. Only problem is with this being my first Apple product i didnt realise my phone did not automatically back up on itunes or icloud as i had to set this up.
    Now i am trying desperately to get my phone to switch on so that i can save all of the baby pictures of my 7 month old son and its not working. i have tried to reset the phone but it does nothing!!
    Can anyone PLEASE help as i am very upset and do not want to lose these precious memories?

    You cannot get Applecare plus now.
    It is unlikely that they will replace as it is damaged.  The only way to find out is to make an appointment at the genius and and see what they say.

  • Importing Photos and Music from Multiple users on the same Mac

    I am the same person with multiple users on one iMac. I need to have the same pics and music files on all of the user names on the one computer.
    I have the family pack MobileMe plan.
    Where are the files located for the photos and music in iTunes?
    I would like to import them from one user to another user on the same computer.
    Thank you

    Welcome to the Apple Discussions.
    If you Import the files from one User to another then you will use double the disk space on your HD as you will have multiple copies of everything. Why not simply share the files between accounts?
    For iPhoto 09 (version 8.0.2) and later:
    What you mean by 'share'.
    If you want the other user to be able to see the pics, but not add to, change or alter your library, then enable Sharing in your iPhoto (Preferences -> Sharing), leave iPhoto running and use Fast User Switching to open the other account. In that account, enable 'Look For Shared Libraries'. Your Library will appear in the other source pane.
    Any user can drag a pic from the Shared Library to their own in the iPhoto Window.
    Remember iPhoto must be running in both accounts for this to work.
    If you want the other user to have the same access to the library as you: to be able to add, edit, organise, keyword etc.
    Quit iPhoto in both accounts. Move the Library to the Users / Shared Folder
    (You can also use an external HD set to ignore permissions, a Disk Image or even partition your Hard Disk.)
    In each account in turn: Double click on the Library to open it. (You may be asked to repair the Library Permissions.) From that point on, this will be the default library location. Both accounts will have full access to the library, in fact, both accounts will 'own' it.
    However, there is a catch with this system and it is a significant one. iPhoto is not a multi-user app., it does not have the code to negotiate two users simultaneously writing to the database, and trying will cause db corruption. So only one user at a time, and back up, back up back up.
    Regards
    TD

  • Problems with Blackberry 8520 Curve Camera / Videocamer​a

     Hello everybody, please help... I've only had my BB for 2 months & already I"m having problems with my Camera on my BB 8520 curve.
    I've taken a video and then moved the scroller (mine is a ball) to save and then it got stuck on send and it doesn't want to move.  If I scroll from left to right it zooms in or out instead of giving me the options to save the file.  That means I cannot use my Videocamera at the moment, because I haven't saved the video I've taken more than a week ago.  I've tried switching off the phone but it doesn't work
    This weekend I've also discovered that my camera doesn't want to zoom anymore if I want to take a picture.  Whether I scroll the ball up & down or left and right... no zooming...
    Please help!
    MARNE NEL

    I've had the same model as you for 2 months as well. My camera mostly takes out of focus pics. Frustrating!

  • SERIOUS Problem with 10.5.5 upgrade and receiving POP3 emails their

    I upgraded to 10.5.5 last night. I am now unable to POP my POP3 email messages from my Network Solutions account. I have talked extensively to Networks Solutions, and I am convinced it's not their problem. I AM able to retrieve the messages using Outlook 2003 on XP. I AM able to retrieve these messages on my other Mac using 10.5.4. This is pretty strong evidence that it's some sort of an issue with Mail in 10.5.5. Note I can send email via smtp fine.
    HELP ....

    Hi All,
    I'm getting the same problem - Mail hangs while fetching new email - usually hangs on the last email. This happened while running 10.5.4 and the 10.5.5 update didn't help.
    Nor did vacuuming the Envelope Index or removing them and rebuilding.
    I'm seeing this is the system log:
    Mail[855] prepareForSave:: save for NSSQLCore 0x17b5efe0 is already in progress
    during invocation of -[MessageRouter routeQueuedMessages]
    Stack Trace: (
    2495115595,
    2416107067,
    2517328129,
    2517326500,
    2517235689,
    2517234566,
    2517309445,
    4819744,
    4245791,
    4147127,
    2495138429,
    2495136872,
    4027592,
    4031370,
    2417900461,
    2417899348,
    2421450485,
    2421450162
    So far, no luck at Google.

  • Problem with Adobe Audition 2.0 and recording from a 1212m.

    I bought a brand new machine and have be configuring it all week. Everything has been going well, except getting Adobe Audition 2.0 (the new version) to “hear” sound from the 1212m.
    The intel 975 motherboard has an integrated HD sound system already on board and I have been able to get adobe audition to recognize it and record from it. This is what I have Windows XP Pro set to as my default sound card.
    I installed the 1212m and I have gotten my monitors to work by using the XLR jacks on the monitors to the ¼ inch jacks on the 1212m using a VST (NI’s Kontakt 2) as the audio source. So it works.
    What I can’t seem to get to work is getting Adobe Audition to “hear” the sound coming from the 1212m.
    Patchmix seems to be working ok. The audio bars jump each time I hit a note on the keyboard.
    I have configured Audition by going to Audio Hardware Setup and setting it to EMU ASIO and tried every combination of INPUT and OUTPUT, but when I hit the Record button in Audition it just flat lines..
    I was hoping that once the audio made it from the VST though the 1212m and out to the speakers, that getting Audition to record it would be easy, but that hasn’t been the case.
    The Intel 955 Extreme Edition and the 975 motherboard are brand new and I’m worried that being on the bleeding edge of technology, that one of the drivers isn’t working correctly and causing me hours of debugging a problem that is unworkable from my end.
    Hopefully the problem is just some small stupid thing that I’m doing or failing to do (like normal).
    Any ideas would be helpful.
    thanks

    I'm just saving it into a file in "My documents" on the internal hard drive. It's a computer in the office which has been used my other people before me and I have my own file which I was always able to save Adobe sound files into before, so I don't think it's anything to do with me not being allowed or read-only.
    I've also been trying to save it onto USB hard drives. This works when I save it under a different name, but not when I'm just trying to update a file i've been working on. Basically I have to create a new file everytime I add something, so like "myaudit1", "myaudit2", "myaudit3" etc etc, even though it's the same piece of work just updated.
    Hope that makes sense!

  • HT2204 I have 3 iphones and all use the same apple ID,how do I change this so each phone has its own id,do i restore the phones to factory settings first??as im having problems with contacts being added to and deleted from each phone.

    I have 3 Iphone 4S and all have the same apple ID which is causing problems as far as contacts are concerned,when i sync 1 of the phones to my comp the contacts appear on all the phones.How do i create a new ID for each of the phones do I have to reset the phones to factory settings first,any help would be appreciated.:)

    Hello marie196,
    Thanks for the question, and welcome to Apple Support Communities.
    You do not necessarily need to restore the device to factory settings, but rather sign out of the four services that utilize your Apple ID: iCloud, iMessage, FaceTime, and iTunes & App Stores. Once signed out, you can sign in with a new Apple ID. For more information, see the following article:
    Using your Apple ID for Apple services
    http://support.apple.com/kb/HT4895
    Additional Information: You may encounter an error regarding a 90-day limit. For information on this, see the following article:
    iTunes Store: Associating a device or computer to your Apple ID
    http://support.apple.com/kb/HT4627
    Thanks,
    Matt M.

  • Problem with iPhone Headset after plugging and unplugging from PC

    Hello
    First I would like to introduce myself, My name is Lukasz and I can very happy customer company Apple.
    but...
    I have one problem, which is really annoying , I hope that someone will be able to help me...here we
    A 3 months ago I bought a Apple Headset for my iPhone 4s. After realising iPhone 5 there also been realeased new iPhone headset.http://static5.businessinsider.com/image/50451874eab8eab73c000005-960/iphone-5-h eadphones-rumor.jpg    
    http://static5.businessinsider.com/image/50451874eab8eab73c000005-960/iphone-5-h eadphones-rumor.jpgHere is a link but you probably all know what I mean.
    To last couple days I was saying that Apple is the best, its Quality, Its something amazing, most amazing accessories I ever had.
    But I plug this headset into the normal PC in a college library...quest what happen after that?
    buttons for volume stop working I can only use the headset to listen to music now but I cant change any volume or double click to change the song.
    Since I plugged in and unplugged it into PC they just do not work. (it was a first time when I plugged them into PC since I bought them).
    I heard from a few people that they have the same, but you now, its not supposed to happen like that.
    Such a simply stuff and "all that amaziness and greatness" its not the same now
    Does anyone have solution for that?
    I cant afford to speend another £30 for headset because I plugged them into PC and they do not work any more...
    Please Help,
    Regardless
    Lukasz

    @aion321
    Welcome to the forum!
    AFAIK you would need adapter similar to this one:http://www.currys.co.uk/gbuk/kit-5300auadp-3-5mm-a​udio-adapter-for-nokia-mobile-phones-07960271-pdt.​...
    Happy to have helped forum with a Support Ratio = 42.5

  • Problem with kernel 2.6.19 and ipw3945 from testing

    After kernel and ipw3945 packages update from testing my wireless network profile isn't working any more so there's something wrong with one of those. Ipw3945 module is loaded but network profile simply fails to start (maybe problems with dhcp?). With kernel and ipw3945 from current everything works fine.
    Anyone has similar problem?

    congyiwu wrote:
    The extra repository seems to already have 1.1.2... I was having the same problem so I ran "pacman -S extra/ipw3945"
    Does anyone know why pacman -Syu doesn't automatically figure out that the version in extra is newer than the version in testing?
    The extra version (i.e. the one that's been upgraded to 1.1.2) was compiled for the kernel26 package in extra (2.6.18), wheras the version in testing was compiled for the kernel26 in testing (2.6.19).  Thus the module in extra won't work if you're using the newer kernel.
    I hope the testing package gets upgraded soon, since it sucks not being able to use wireless!  I tried to update the PKGBUILD myself, but couldn't get a working module...

  • Charging and outputting from i pad at the same time

    I am using I pad Air to connect to Garmin heads up display for navigation. However when it outputs the data to the heads up display it does not charge. Is there a solution for this

    Hmm. It looks like Garmin expected the HUD to be used with an iPhone, not a power-hungry iPad Air. The Garmin HUD comes with a passthrough USB 2.1A charger rated at  5V. The iPad Air requires 12V.
    If you were not running anything on the iPad, you might get a trickle charge on an Air with a 5V charger - really, very little charge at all if any. But navigation is pretty intensive. You will not be able to charge with that. If you have a second cigareet lighter adapter in your vehicle, you can get an auto charger designed specifically for the iPad Air. Or consider an external batter pack - again made specifically for the iPad Air.

  • [Serious Problem] with blackberry curve 9300

    hello everyone ,
    i am new to this forum my reason for comming to this forum is very sevire. 1 month before my phone was working perfect but suddenly this month nearly 10-15 days ago it started turning off randomly without any notice . and it turns on only when we take out batter and put it in again or connecting it to a wall charger it is having servere problems my back cover is not fitting perfectly when i looked at my battery it was puffed from center and constantly it gives me msgs that "battery drained shutting down handheld".
    Solved!
    Go to Solution.

    Hi and Welcome to the Community!
    Based on what you describe, I would guess that your battery is damaged...possibly dangerously so. I recommend you immediately remove it and, if you remain in warranty, seek formal support under those terms. If you have no warranty, then I recommend you obtain a replacement battery. Hopefully your device itself is not causal to the damaged battery.
    Good luck!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

Maybe you are looking for

  • Big problem with JSplitPane

    Hello, I feel I'm going mad with Swing. I have a main main JTabbedPane: main. First component: JEditorPane : source Second Component: JPanel : view( = new JPanel()) In view I have: JPanel toolbox to NORTH and JSplitPane: ds to CENTER. In ds I have: L

  • Transfer certain playlists to new device question

    Hi There I have an imac and my wife has an ipad.  She has been sharing an itunes account on the imac, and we have created playlists for her and me.  She wants to transfer her playslists to her new ipad.  is this possible, and if so how is it done? Th

  • Bapi to create a Transfer Order from a Transfer Requirement.

    Hi everybody, Does anybody know wich bapi or FM can I use to create a TO from a TR in a putaway process? Thanks and Regards,

  • Cannot re-install OS

    A client of mine recently gave me one of their old G4 computers. I was told that they did not know the password of the admin account, but they did have the password for the standard user account. I did not care, because I just figured I would replace

  • Pls help with a program

    I'm making a quiz, and i store the questions in a textfile. The user can choose from 3 quizes, either Plate Tectonics, Rivers or Rocks. I managed to call the questions from Java. Each quiz has a set of 10 questions. In the code below i only included