Serious problems including battery overheating

My dad and I both bought Revolutions and have had the same issues with our phones (listed below). We truly believe that the LG Revolution is a defective phone - what are the odds that we would both get "lemons"? While at the Verizon store on 3/13, the store, corporate customer service, and LG claimed to not be able to do anything for us except send us refurbished phones or return our phones to LG and have them worked on (HA. Seriously? Go without a phone? We don't have a land line anymore - might as well dump us on a deserted island). We were notified today, 3/15 that the phones were in the store ready to pick up, but they didn't come with new batteries! SERIOUSLY?!?! THE MAJOR ISSUE WITH BOTH IS THE BATTERY OVERHEATING! These phones are bound to either burn us or kill us. We don't want someone else's "fixed" phone, because it will just do the same thing! Unless Verizon will help us, I'm afraid we are going to get iPhones from another provider, as well as go to the BBB to file a formal complaint. I really don't want to, but I can't believe how much we have spent for our little death machines. We really hope Verizon will cooperate and uphold the standards they set forth in their employee handbook. We would love to be contacted by someone who can help. Please, don't give us the run-around. As anyone can see, factory resets, changing settings, etc. don't work. We have put up with those suggestions for months with no improvement.
My Dad's Revolution:
Bought LG Revolution ~July 3, 2011 for $250 + taxes & fees, car charger, (and eventually extra chargers). Over $300 total put in.
Battery gets overheated to the point that the phone is too hot to touch. This drains the battery from any percentage of battery to 0% in a matter of minutes. FIRE HAZARD IN YOUR POCKET! My dad's chest was almost burned! If it is too hot to touch on the outside, what is it doing to the guts of the phone?!
Not receiving text messages and picture messages that are sent
Internet doesn’t work properly - only when it feels like it
Loses data connection between 3G/4G/Wireless
Not always getting voice mail notifications
Phone burned up 2 wall chargers
Freezing
Phone is ringing, but the “answer call” screen doesn’t come up, so there is no way to answer the call
Phone rings once and then shows a missed call. When calling the person back, they say it rang the normal number of times before going to voicemail.
Not keeping a charge
Called sister next door and Dad could hear them, but she couldn't hear him. He called back and he could hear her fine, but she said he was very "scratchy" - keep in mind this is NEXT DOOR.
My Revolution:
Bought LG Revolution ~July 9, 2011 for $250 + taxes & fees, (eventually, multiple) car charger(s), insurance plan, (eventually, additional wall chargers) $400+ for the total cost
Battery gets overheated to the point that the phone is too hot to touch. This drains the battery from any percentage of battery to 0% in a matter of minutes. FIRE HAZARD IN YOUR POCKET! My thigh has almost been burned! If it is too hot to touch on the outside, what is it doing to the guts of the phone?!
Paying for “Unlimited Data” and phone constantly says “Mobile Network State: Disconnected”
Not receiving text messages and picture messages that are sent
Not being able to send text messages or picture messages
Getting the same text 3-4 times
Sending a text once and recipient getting it 3-4 times
Internet/apps don’t work due to no data
Loses data connection between 3G/4G/Wireless
Not always getting voice mail notifications – getting voice mails 14+ days late. This creates a serious problem for time sensitive messages.
Phone burned up 4 wall chargers and 2 car chargers
Freezing
Phone is ringing, but the “answer call” screen doesn’t come up, so there is no way to answer the call
Not keeping a charge. On a daily basis between 7:30am-12:30pm, I go from 100% to 20%. In the store on 3/13, the Verizon rep witnessed my phone go from 81% to 68% in about an hour
Phone rings once and then shows a missed call. When calling the person back, they say it rang the normal number of times before going to voicemail.
In the beginning, I would get email notifications and after I would read them, it would appear that they were “marked as read”, however, after I back out of the program, it notifies me of the same emails that I just read, only they’re once again “unread”. Now, I’m not getting ANY notifications of email except in the top drop-down screen, which if I click on it, I can see the emails, but after I back out, they disappear because the program decides not to work.
GPS is unreliable. It often says that I'm 2+ miles away from where I actually am.
The phone does what it wants to do when it wants to do it – not when you tell it to! All of our previous phones have given us reliable, clear service. What is wrong with this picture? HELP!!!

Hi I recently had the same problem with the LG Revolution. In fact it had been one of multiple replacement models that I had received in just a few weeks. The first two devices I had problems with them recycling power, I would make calls and they would make the same call multiple times i.e I would get through to the person I was intending on calling and the phone would call them on like a three way call asking me to merge the conversation I was only having with one other person... The 2nd replacement only lasted a few days. I was playing Words with Friends it gave me a sim error out of nowhere shut down. I checked the card after removing the battery and powered it back up. I was fine for about 10 minutes shut down and I was never able to turn it on again. The next phone they sent I received a few day ltr was the frosting on the cake. As soon as I tried to set it up the problems began. The phone was recycling power so much that it wouldn't fully power up before shutting down. Tech support insisted it had to be the battery, that there was no way they sent me 3 bad phones within 2 1/2 weeks... The new battery was sent over night. So I charged it up and gave it a go. It seemed fine at first, but then started acting up again. I resorted to it wasn't the battery and figured when I got to a land line  or another line I would call Tech support. I was driving the phone was in my right lower scrub pocket apparently because of whatever mechanical defect it had overheated and burned me. I have been kind of at a loss when it comes to the Customer Service Dept. I have reported the incident to them even called to find out who to send my co pay bills too, no response. However they did have the nerve to send me a text asking for the device back or they were going to charge me $500. Now I'm thinking may be if people started taking things like this to the media they would act on it...

Similar Messages

  • Still Having Problem with Battery Overheating with Car Dock/Charger when using Maps/Navigation

    I'm having a problem with the battery overheating when using Google Navigation in the OEM Samsung car dock and car charger.  On a trip last weekend, I started off with a fully charged battery (because posts on other sites have complained that the Charge cannot keep up with the power draw of the Google nav app while using the car charger).  About an hour into my trip, I got a message that the battery was overheating and to unplug the charger which I did.  I then had to contend with the screen going out because it was running on the battery.  I let the phone discharge to about 70% then tried the car charger again.  Within a few minutes, I got the same overheating message.  It was not an overly hot day and the car A/C was set at 68 degrees.  
    This morning (with the battery at about 85%) I tried to use the Navigation without the car dock while charging and got the same results...the phone battery overheated and I had to unplug the charger. The battery temperature reached 116 degrees. (also, the battery level was also dropping while using the Maps or Nav application even though it was hooked up to the car charger).  
    I'm very disappointed with this situation since I was hoping I could replace my old Garmin GPS with the Charge.  But between the phone dimming the screen while running on battery, and having a depleted battery in the phone at the end of the trip, its just not a viable option.  I really like this phone, but I'm running against the "return" clock.  
    Any ideas?
    Could this be a software problem that will be corrected by an update in the future?
    fyi:  other Charge problems in the last 5 days:
    - dropping audio on calls to other Verizon phones.
    - use of camera flash causing the phone to reboot.
    (I do have the 'class 4' 32gb card in my Charge)
    Thanks in advance,
    Rich

    Jerry:
    Yes, the phone is charging while in the car dock.  I confirmed it both under the "about phone-status-battery status" menu and by my battery widget.  By watching the battery widget, I also noticed that the voltage steadily increased over the ride home.  It started at about 3.90 volts and ended at 4.02 volts.  I don't know if that is significant.  This time the battery did not overheat.  The Max temp was 110 degrees, but no notice to disconnect came up.  This might be because the sun was behind me on the drive home rather than beating down on the dash like it was this weeked.
    I've ordered a cheap universal dock from Amazon for about $15.00 which clips onto the a/c vent.  I want to see if this keeps the temperature down.  If this works, I can still return the fancy-schmantzy Samsung OEM car dock. (The car-dock interface wasn't that impressive anyway).
    Please let me know if the volt change means anything.
    And thanks again for your help!
    Rich

  • Serious problems with battery life in 17" MBP 2011

    My battery seems to be getting worse and worse. Today I did a photo presentation pluged into the TV. Lasted about 20 minutes. Just flicking through photos, nothing intensive. My battery was at %100 when I started and when done it was at %62. %38 drop in 20 minutes and all I was doing is going through pictures. Something seems very wrong.
    I would appreciate any intelligent advice.
    Thnx!

    From Tekserve in NYC. I purchase almost all my equipment there.
    Hey there,
    It looks like we actually can not replace this battery. Unfortunately because it's a 17" model, the batteries are no longer being made.
    I would recommend searching on Amazon and seeing if you have any luck!
    Apologies for the inconvenience,
    Lindsay
    TekserveApple Specialist - Macintosh Systems, Solutions and Service 
    Walk-in and mail address: 119 West 23rd Street, New York, NY 10011
    Shipping address: 114 West 24th Street, New York, NY 10011
    (212) 929-3645 phone / (212) 463-9280 fax / [email protected]
    Then I sent an email saying Waaah!? And this was her reply.
    Apple discontinued the 17" model and stopped making parts.
    I recommend calling Apple directly at 1-800-MY-APPLE (1-800-692-7743).
    You WILL be answered by a "robot" but it usually takes less than 3 minutes to get to a person.
    Lindsay
    TekserveApple Specialist - Macintosh Systems, Solutions and Service 
    Walk-in and mail address: 119 West 23rd Street, New York, NY 10011
    Shipping address: 114 West 24th Street, New York, NY 10011
    (212) 929-3645 phone / (212) 463-9280 fax / [email protected]

  • Sir since update of ios 8.1.2 i got serious battery problem on 3g 4.30 hrs my battery gets low and sometimes serious net probelms please give an update for this issue its not alone me my friends too getting many problem lcommonly battery problem

    sir since update of ios 8.1.2 i got serious battery problem on 3g 4.30 hrs my battery gets low and sometimes serious net probelms please give an update for this issue its not alone me my friends too getting many problem commonly battery problem please can this be resolved
    its not related to any hardware because last year april i got replacement new phone from apple and i maintained it well...!

    Probably apps running in the background are causing this, sometimes Mail get's stuck connecting to the mail server, or some social media app like Facebook can also be a reason for prolonged background activity.
    Try to reset the phone by holding the sleep and home button for about 10sec, until the Apple logo comes back again. You will not lose any data by resetting, but it can cure some glitches.
    If this does not help, setting it up as new device would be the next step:
    How to erase your iOS device and then set it up as a new device or restore it from backups
    Also take a look at these tips to prolong the battery life again:
    http://www.overthought.org/blog/2014/the-ultimate-guide-to-solving-ios-battery-d rain

  • Hi, I have an iPhone 5s, recently its been a lot hotter than usual, also the battery life is going down a lot faster than usual, and it takes absolutely ages to charge up. There must be a serious problem with the battery, any ideas? thanks

    Hi, I have an iPhone 5s, recently its been a lot hotter than usual, also the battery life is going down a lot faster than usual, and it takes absolutely ages to charge up. There must be a serious problem with the battery, any ideas? thanks

    Apple can replace the battery for $79 US.
    http://support.apple.com/kb/index?page=servicefaq&product=iphone

  • HT6154 Having SERIOUS problems with iOS 7.1 on my iPhone 4S!!!!

    I am having SERIOUS problems here. Let me give you a rundown:
    I have to reboot my phone (or turn it off and on again) to see the correct battery percentage (but I'll address that in a second), and once I reboot it or bring it back up again, it has to restart itself (in the middle of use) about 3 or 4 times before it stays on consistantly; all the while reading the percentage of battery it remembers from the last reboot. Now, about the battery percentage: I restarted it before I charged it last night and it read 16% -mind you, after it had to shut itself down and restart 3 times. I put it on the charger all night, and it still read 16%...but I decided to run a battery cycle (charge it all the way up, and drain it all the way down) to see if that would help. Sad to say, it did not help; infact it made things worse. It now flip-flops in between the Apple boot-up symbol and a black screen when plugged up to a charger or a computer. The computer cannot read the phone being plugged in so I cannot do a manual restore from iTunes.
    Best yet, I upgraded to 7.1, and had the SAME EXACT PROBLEMS I AM HAVING NOW. I did a complete restore of my phone, and even set it up as a brand new iPhone, not even a restore from the last iCloud backup, and just loaded all my content from my Mac...and the problems decided to follow -even after the fresh restore.
    I'm toying with the idea that it may be a hardware problem, but I would love to know if anyone is experiencing the same issue.
    I have no idea what to do... please help.
    I use my phone for business constantly, and almost cannot do my job without it.

    ok well seeing that your are having major issues with the battery and the loading screen it is a hardware issue. reseting it wont help that at all. what you need to do is take it to apple and let them look at it. They can tell you what is wrong with it and how much it would be to fix it ( if it is possible your situation is really bad) but if its not they might give you a discount if you give the iphone to them.

  • Serious problem with my iPod Classic/iTunes

    I have a 6th Generation iPod classic (80 GB), and recently, I have been having some serious problems with it.
    When I connect it to iTunes, there is usually no problem, it shows up, plays and displays the music correctly, etc. However, if I try to ADD any music to it, iTunes will freeze, then close, and within 5 minutes, my entire computer will freeze completely, and be shut off. For whatever reason, happen when my iPod finally disconnects because my computer turned off, all of my music is missing from the library (This doesn't happen every time it freezes, because I try to disconnect my iPod manually before everything freezes). The music is still on the iPod, (it says that I have XX.X GB of "other" instead of music/videos), but it doesn't show up. When I plug in my iPod, iTunes says that there was a problem and I need to restore it. The first time this happened, I lost over 5,800 songs, but I forgave Apple, because these things do occasionally happen, plus I had no idea what exactly went on. The SECOND time happened within the same week, after I had put 800 songs back on the restored iPod. The first time happened when I was using iTunes 10 (which is seriously buggy on my computer, and freezes often), so I switched to iTunes 9 (still buggy, but doesn't freeze quite as much), and the same thing happened. So now I'm thinking it's my iPod's fault. My iPod does a whole host of minor problems over time such as making certain songs cut off at a certain specific point for no reason (Always the same song, always the same cut off point, and I can't fast forward past it, I also can't delete the songs because if I highlight them on iTunes, iTunes will freeze, and if I find them under the music folder in iPod control, my computer will freeze), freezing the entire iPod for seemingly no reason, and somehow messing up my album artwork (it will appear as "Colourful Static"), along with alot more.
    I know this is a troublesome problem, but if anyone could somehow shine some light on this problem, it would be tremendously appreciated.
    Thank you
    -Eric Luna

    Unfortunately, when a hard drive starts clicking that means it's going bad. The mechanism is having trouble reading the drive. Since the iPod is mostly just a harddrive and a battery I have a feeling that this is your problem.
    watch this video. http://www.youtube.com/watch?v=wMm6c3fr-fU
    about 25ss in is where the clicking starts. If it sounds like that, but softer and more muffled since it is a smaller drive that is being enclosed then I think you might be SOL. Maybe if you're iPod is still under warranty you can get a credit and go for a touch and avoid moving parts all together?

  • A serious problem with AAR 5.0 in printing out a book

    I have written a book in MS Word 2000 and I converted it in a PDF file with AR 5.0
    Then I tried to print it out as a book.
    I rotated the pages and included two A4 pages in one so that an A4 sheet to have 4 pages on both sides.
    In order to do this trick, I rotated the horizontal text page
    to vertical position on the left side for printing out the page 1 and on the right side for printing out the page 2. This must be done in order to have the 4 pages printed out in a sequence and in an A4 sheet.
    The procedure is as follows:
    First, I print out the page one (1) while having my PDF text page rotated vertically on the left side and the printing out is successful.
    Then I rotate again the page vertically to face on the right side to print out the page two (2) in the same sheet.
    Here is where the problem begins.
    The page 1 is printed out well BUT its top/bottom margin is different than the page 2, which is printed in a lower position on the A4 sheet.
    The margins all around the page look perfect but the two of them are printed out with one line lower that makes one page higher or lower than the other and not in a straight line as it is supposed to be.
    I have tried to find out what causes this problem with no success so I am into contact with you requesting an immediate help. I know that it is a small but serious problem particularly for my case as an author and I believe that the solution can be given only by an expert of Adobe Acrobat 5.O
    Please, inform me about any adjustment that must be done to solve this margin situation (problem) as I know that AAR 5.0 is an excellent software and can do this work for me.
    Regards,
    Emmanouel

    This has nothing to do with Adobe's OpenType development tools, which is the purpose of this forum. I think you need to post this in the Acrobat Windows forum!
    Regards,
    T

  • Serious problem of jdbc-mysql connectivity using tomcat

    hi everybody
    i m in serious problem since last 15-20 days. i m trying hard to make the connection jdbc-mysql using tomcat with the help of a jsp test page but every time i am facing almost the similar probems listed below in detail:
    to make sure that the jdrivers's .jar (mysql-connector-java-3.1.7-bin.jar) available for such connections working fine i have tried the above said connection without using tomcat....which is working fine...for this i have created a dummy database with a dummy table ..and written some queries in the .java file of my code which upon running inserts the specified values in the defined(dummy) database.
    this is the confirmation that the classpath etc..are ok in regard to the mysql-connector-java-3.1.7-bin.jar
    now i have placed a copy of this .jar file in to the commons/lib directory of the tomcat web server(which is suppossed to be the place for such external jars)
    after doing so i have followed 2 methods :
    method 1st:........
    i have made aone more jar file from the following .java file....
    import javax.naming.*;
    import javax.sql.*;
    import java.sql.*;
    public class TestSQLLoad
    String user = "Not Connected";
    String pwd = "no pwd";
    int id = -1;
    public void init() {
    try{
    Context ctx = new InitialContext();
    if(ctx == null ) {
    throw new Exception("Boom - No Context");
    DataSource ds = (DataSource)ctx.lookup("java:comp/env/jdbc/TestDB");
    if (ds != null) {
    Connection conn = ds.getConnection();
    if(conn != null) {
    user = "Got Connection "+conn.toString();
    Statement stmt = conn.createStatement();
    String q = "select name, password, id from user";
    ResultSet rst = stmt.executeQuery(q);
    if(rst.next()) {
    user=rst.getString(1);
    pwd=rst.getString(2);
    id = rst.getInt(3);
    conn.close();
    }catch(Exception e) {
    e.printStackTrace();
    public String getUser() {
    return user;
    public String getPassword() {
    return pwd;
    public int getID()
    return id;
    after compiling it at the cmd prompt i made a .jar file from the .class of it and named it MySQLLoad.jar...then i placed it also in to the commons/lib directory where the mysql-connector-java-3.1.7-bin.jar was already placed.
    then i have changed the server.xml and web.xml files from the conf directory of the tomcat as given here:
    server.xml
    <!-- Example Server Configuration File -->
    <!-- Note that component elements are nested corresponding to their
    parent-child relationships with each other -->
    <!-- A "Server" is a singleton element that represents the entire JVM,
    which may contain one or more "Service" instances. The Server
    listens for a shutdown command on the indicated port.
    Note: A "Server" is not itself a "Container", so you may not
    define subcomponents such as "Valves" or "Loggers" at this level.
    -->
    <Server port="8005" shutdown="SHUTDOWN">
    <!-- Comment these entries out to disable JMX MBeans support used for the
    administration web application -->
    <Listener className="org.apache.catalina.mbeans.ServerLifecycleListener" />
    <Listener className="org.apache.catalina.mbeans.GlobalResourcesLifecycleListener" />
    <!-- Global JNDI resources -->
    <GlobalNamingResources>
    <!-- Test entry for demonstration purposes -->
    <Environment name="simpleValue" type="java.lang.Integer" value="30"/>
    <!-- Editable user database that can also be used by
    UserDatabaseRealm to authenticate users -->
    <Resource name="UserDatabase" auth="Container"
    type="org.apache.catalina.UserDatabase"
    description="User database that can be updated and saved"
    factory="org.apache.catalina.users.MemoryUserDatabaseFactory"
    pathname="conf/tomcat-users.xml" />
    </GlobalNamingResources>
    <!-- A "Service" is a collection of one or more "Connectors" that share
    a single "Container" (and therefore the web applications visible
    within that Container). Normally, that Container is an "Engine",
    but this is not required.
    Note: A "Service" is not itself a "Container", so you may not
    define subcomponents such as "Valves" or "Loggers" at this level.
    -->
    <!-- Define the Tomcat Stand-Alone Service -->
    <Service name="Catalina">
    <!-- Define a non-SSL HTTP/1.1 Connector on port 8080 -->
    <Connector
    port="80" maxThreads="150" minSpareThreads="25" maxSpareThreads="75"
    enableLookups="false" redirectPort="8443" acceptCount="100"
    connectionTimeout="20000" disableUploadTimeout="true" />
    <!-- Note : To disable connection timeouts, set connectionTimeout value
    to 0 -->
    <!-- Define an AJP 1.3 Connector on port 8009 -->
    <Connector port="8009"
    enableLookups="false" redirectPort="8443" protocol="AJP/1.3" />
    <!-- Define the top level container in our container hierarchy -->
    <Engine name="Catalina" defaultHost="localhost">
    <Realm className="org.apache.catalina.realm.UserDatabaseRealm"
    resourceName="UserDatabase"/>
    <Host name="localhost" appBase="webapps"
    unpackWARs="true" autoDeploy="true"
    xmlValidation="false" xmlNamespaceAware="false">
    <Context path="/testdb" docBase="TOMCAT_HOME/webapps/tomcat-docs/testdb"
    debug="5" reloadable="true" crossContext="true" >
    <Logger className="org.apache.catalina.logger.FileLogger"
    prefix="localhost_DBTest_log." suffix=".txt"
    timestamp="true"/>
    <Resource name="jdbc/TestDB"
    auth="Container"
    type="javax.sql.DataSource"/>
    <ResourceParams name="jdbc/TestDB">
    <parameter>
    <name>factory</name>
    <value>org.apache.commons.dbcp.BasicDataSourceFactory</value>
    </parameter>
    <parameter>
    <name>maxActive</name>
    <value>10</value>
    </parameter>
    <parameter>
    <name>maxIdle</name>
    <value>5</value>
    </parameter>
    <parameter>
    <name>maxWait</name>
    <value>10000</value>
    </parameter>
    <!-- MySQL dB username and password for dB connections -->
    <parameter>
    <name>username</name>
    <value>root</value>
    </parameter>
    <parameter>
    <name>password</name>
    <value>mysql</value>
    </parameter>
    <!-- Class name for mm.mysql JDBC driver -->
    <parameter>
    <name>driverClassName</name>
    <value>com.mysql.jdbc.Driver</value>
    </parameter>
    <parameter>
    <name>url</name>
    <value>jdbc:mysql://localhost/testdb?autoReconnect=true</value>
    </parameter>
    </ResourceParams>
    </Context>
    </Host>
    </Engine>
    </Service>
    </Server>
    and the other xml file i.e
    web.xml is here:
    <?xml version="1.0" encoding="ISO-8859-1"?>
    <web-app xmlns="http://java.sun.com/xml/ns/j2ee"
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
    xsi:schemaLocation="http://java.sun.com/xml/ns/j2ee http://java.sun.com/xml/ns/j2ee/web-app_2_4.xsd"
    version="2.4">
    <servlet>
    <servlet-name>default</servlet-name>
    <resource-ref>
    <description>DB Connection</description>
    <res-ref-name>jdbc/TestDB</res-ref-name>
    <res-type>javax.sql.DataSource</res-type>
    <res-auth>Container</res-auth>
    </resource-ref>
    <servlet-class>org.apache.catalina.servlets.DefaultServlet</servlet-cl ***>
    <init-param>
    <param-name>debug</param-name>
    <param-value>0</param-value>
    </init-param>
    <init-param>
    <param-name>listings</param-name>
    <param-value>true</param-value>
    </init-param>
    <load-on-startup>1</load-on-startup>
    </servlet>
    <servlet>
    <servlet-name>invoker</servlet-name>
    <servlet-class>
    org.apache.catalina.servlets.InvokerServlet
    </servlet-class>
    <init-param>
    <param-name>debug</param-name>
    <param-value>0</param-value>
    </init-param>
    <load-on-startup>2</load-on-startup>
    </servlet>
    <servlet>
    <servlet-name>jsp</servlet-name>
    <servlet-class>org.apache.jasper.servlet.JspServlet</servlet-class>
    <init-param>
    <param-name>fork</param-name>
    <param-value>false</param-value>
    </init-param>
    <init-param>
    <param-name>xpoweredBy</param-name>
    <param-value>false</param-value>
    </init-param>
    <load-on-startup>3</load-on-startup>
    </servlet>
    <servlet-mapping>
    <servlet-name>invoker</servlet-name>
    <url-pattern>/servlet/*</url-pattern>
    </servlet-mapping>
    <!-- The mapping for the JSP servlet -->
    <servlet-mapping>
    <servlet-name>jsp</servlet-name>
    <url-pattern>*.jsp</url-pattern>
    </servlet-mapping>
    <servlet-mapping>
    <servlet-name>jsp</servlet-name>
    <url-pattern>*.jspx</url-pattern>
    </servlet-mapping>
    <session-config>
    <session-timeout>30</session-timeout>
    </session-config>
    <mime-mapping>
    <extension>abs</extension>
    <mime-type>audio/x-mpeg</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>ai</extension>
    <mime-type>application/postscript</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>aif</extension>
    <mime-type>audio/x-aiff</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>aifc</extension>
    <mime-type>audio/x-aiff</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>aiff</extension>
    <mime-type>audio/x-aiff</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>aim</extension>
    <mime-type>application/x-aim</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>art</extension>
    <mime-type>image/x-jg</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>asf</extension>
    <mime-type>video/x-ms-asf</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>asx</extension>
    <mime-type>video/x-ms-asf</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>au</extension>
    <mime-type>audio/basic</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>avi</extension>
    <mime-type>video/x-msvideo</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>avx</extension>
    <mime-type>video/x-rad-screenplay</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>bcpio</extension>
    <mime-type>application/x-bcpio</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>bin</extension>
    <mime-type>application/octet-stream</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>bmp</extension>
    <mime-type>image/bmp</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>body</extension>
    <mime-type>text/html</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>cdf</extension>
    <mime-type>application/x-cdf</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>cer</extension>
    <mime-type>application/x-x509-ca-cert</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>class</extension>
    <mime-type>application/java</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>cpio</extension>
    <mime-type>application/x-cpio</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>csh</extension>
    <mime-type>application/x-csh</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>css</extension>
    <mime-type>text/css</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>dib</extension>
    <mime-type>image/bmp</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>doc</extension>
    <mime-type>application/msword</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>dtd</extension>
    <mime-type>text/plain</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>dv</extension>
    <mime-type>video/x-dv</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>dvi</extension>
    <mime-type>application/x-dvi</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>eps</extension>
    <mime-type>application/postscript</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>etx</extension>
    <mime-type>text/x-setext</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>exe</extension>
    <mime-type>application/octet-stream</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>gif</extension>
    <mime-type>image/gif</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>gtar</extension>
    <mime-type>application/x-gtar</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>gz</extension>
    <mime-type>application/x-gzip</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>hdf</extension>
    <mime-type>application/x-hdf</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>hqx</extension>
    <mime-type>application/mac-binhex40</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>htc</extension>
    <mime-type>text/x-component</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>htm</extension>
    <mime-type>text/html</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>html</extension>
    <mime-type>text/html</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>hqx</extension>
    <mime-type>application/mac-binhex40</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>ief</extension>
    <mime-type>image/ief</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>jad</extension>
    <mime-type>text/vnd.sun.j2me.app-descriptor</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>jar</extension>
    <mime-type>application/java-archive</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>java</extension>
    <mime-type>text/plain</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>jnlp</extension>
    <mime-type>application/x-java-jnlp-file</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>jpe</extension>
    <mime-type>image/jpeg</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>jpeg</extension>
    <mime-type>image/jpeg</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>jpg</extension>
    <mime-type>image/jpeg</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>js</extension>
    <mime-type>text/javascript</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>jsf</extension>
    <mime-type>text/plain</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>jspf</extension>
    <mime-type>text/plain</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>kar</extension>
    <mime-type>audio/x-midi</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>latex</extension>
    <mime-type>application/x-latex</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>m3u</extension>
    <mime-type>audio/x-mpegurl</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>mac</extension>
    <mime-type>image/x-macpaint</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>man</extension>
    <mime-type>application/x-troff-man</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>me</extension>
    <mime-type>application/x-troff-me</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>mid</extension>
    <mime-type>audio/x-midi</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>midi</extension>
    <mime-type>audio/x-midi</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>mif</extension>
    <mime-type>application/x-mif</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>mov</extension>
    <mime-type>video/quicktime</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>movie</extension>
    <mime-type>video/x-sgi-movie</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>mp1</extension>
    <mime-type>audio/x-mpeg</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>mp2</extension>
    <mime-type>audio/x-mpeg</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>mp3</extension>
    <mime-type>audio/x-mpeg</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>mpa</extension>
    <mime-type>audio/x-mpeg</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>mpe</extension>
    <mime-type>video/mpeg</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>mpeg</extension>
    <mime-type>video/mpeg</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>mpega</extension>
    <mime-type>audio/x-mpeg</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>mpg</extension>
    <mime-type>video/mpeg</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>mpv2</extension>
    <mime-type>video/mpeg2</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>ms</extension>
    <mime-type>application/x-wais-source</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>nc</extension>
    <mime-type>application/x-netcdf</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>oda</extension>
    <mime-type>application/oda</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>pbm</extension>
    <mime-type>image/x-portable-bitmap</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>pct</extension>
    <mime-type>image/pict</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>pdf</extension>
    <mime-type>application/pdf</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>pgm</extension>
    <mime-type>image/x-portable-graymap</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>pic</extension>
    <mime-type>image/pict</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>pict</extension>
    <mime-type>image/pict</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>pls</extension>
    <mime-type>audio/x-scpls</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>png</extension>
    <mime-type>image/png</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>pnm</extension>
    <mime-type>image/x-portable-anymap</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>pnt</extension>
    <mime-type>image/x-macpaint</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>ppm</extension>
    <mime-type>image/x-portable-pixmap</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>ppt</extension>
    <mime-type>application/powerpoint</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>ps</extension>
    <mime-type>application/postscript</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>psd</extension>
    <mime-type>image/x-photoshop</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>qt</extension>
    <mime-type>video/quicktime</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>qti</extension>
    <mime-type>image/x-quicktime</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>qtif</extension>
    <mime-type>image/x-quicktime</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>ras</extension>
    <mime-type>image/x-cmu-raster</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>rgb</extension>
    <mime-type>image/x-rgb</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>rm</extension>
    <mime-type>application/vnd.rn-realmedia</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>roff</extension>
    <mime-type>application/x-troff</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>rtf</extension>
    <mime-type>application/rtf</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>rtx</extension>
    <mime-type>text/richtext</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>sh</extension>
    <mime-type>application/x-sh</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>shar</extension>
    <mime-type>application/x-shar</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>smf</extension>
    <mime-type>audio/x-midi</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>sit</extension>
    <mime-type>application/x-stuffit</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>snd</extension>
    <mime-type>audio/basic</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>src</extension>
    <mime-type>application/x-wais-source</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>sv4cpio</extension>
    <mime-type>application/x-sv4cpio</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>sv4crc</extension>
    <mime-type>application/x-sv4crc</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>swf</extension>
    <mime-type>application/x-shockwave-flash</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>t</extension>
    <mime-type>application/x-troff</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>tar</extension>
    <mime-type>application/x-tar</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>tcl</extension>
    <mime-type>application/x-tcl</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>tex</extension>
    <mime-type>application/x-tex</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>texi</extension>
    <mime-type>application/x-texinfo</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>texinfo</extension>
    <mime-type>application/x-texinfo</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>tif</extension>
    <mime-type>image/tiff</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>tiff</extension>
    <mime-type>image/tiff</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>tr</extension>
    <mime-type>application/x-troff</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>tsv</extension>
    <mime-type>text/tab-separated-values</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>txt</extension>
    <mime-type>text/plain</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>ulw</extension>
    <mime-type>audio/basic</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>ustar</extension>
    <mime-type>application/x-ustar</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>xbm</extension>
    <mime-type>image/x-xbitmap</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>xht</extension>
    <mime-type>application/xhtml</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>xhtml</extension>
    <mime-type>application/xhtml</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>xml</extension>
    <mime-type>text/xml</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>xpm</extension>
    <mime-type>image/x-xpixmap</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>xsl</extension>
    <mime-type>text/xml</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>xwd</extension>
    <mime-type>image/x-xwindowdump</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>wav</extension>
    <mime-type>audio/x-wav</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>svg</extension>
    <mime-type>image/svg</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>svgz</extension>
    <mime-type>image/svg</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>vsd</extension>
    <mime-type>application/x-visio</mime-type>
    </mime-mapping>
    <mime-mapping>
    <!-- Wireless Bitmap -->
    <extension>wbmp</extension>
    <mime-type>image/vnd.wap.wbmp</mime-type>
    </mime-mapping>
    <mime-mapping>
    <!-- WML Source -->
    <extension>wml</extension>
    <mime-type>text/vnd.wap.wml</mime-type>
    </mime-mapping>
    <mime-mapping>
    <!-- Compiled WML -->
    <extension>wmlc</extension>
    <mime-type>application/vnd.wap.wmlc</mime-type>
    </mime-mapping>
    <mime-mapping>
    <!-- WML Script Source -->
    <extension>wmls</extension>
    <mime-type>text/vnd.wap.wmlscript</mime-type>
    </mime-mapping>
    <mime-mapping>
    <!-- Compiled WML Script -->
    <extension>wmlscriptc</extension>
    <mime-type>application/vnd.wap.wmlscriptc</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>wrl</extension>
    <mime-type>x-world/x-vrml</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>Z</extension>
    <mime-type>application/x-compress</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>z</extension>
    <mime-type>application/x-compress</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>zip</extension>
    <mime-type>application/zip</mime-type>
    </mime-mapping>
    <welcome-file-list>
    <welcome-file>index.html</welcome-file>
    <welcome-file>index.htm</welcome-file>
    <welcome-file>index.jsp</welcome-file>
    </welcome-file-list>
    </web-app>
    after all this i have taken a jsp page whose code is here:
    (the mysql database used is named as "testdb" and the table name is "user" which is having fields name,password and id)
    <html>
    <head>
    <title>DB Test</title>
    </head>
    <body>
    <%
    TestSQLLoad tst = new TestSQLLoad ( );
    tst.init();
    %>
    <h2>Results</h2>
    User <%= tst.getUser() %>
    Pwd <%= tst.getPassword() %>
    Id <%= tst.getID() %>
    </body>
    </html>
    and placed it in to the Tomcat 5.5\webapps\tomcat-docs\testdb directory and saved as test-db.jsp
    when i run this page on the browser i get a lot may errors stating
    org.apache.jasper.JasperException: Unable to compile class for JSP
    An error occurred at line: 12 in the jsp file: /testdb/test-db.jsp
    Generated servlet error:
    TestSQLLoad cannot be resolved or is not a type
    An error occurred at line: 12 in the jsp file: /testdb/test-db.jsp
    Generated servlet error:
    TestSQLLoad cannot be resolved or is not a type
    org.apache.jasper.compiler.DefaultErrorHandler.javacError(DefaultErrorHandler.j ava:84)
    org.apache.jasper.compiler.ErrorDispatcher.javacError(ErrorDispatcher.java:328)
    org.apache.jasper.compiler.JDTCompiler.generateClass(JDTCompiler.java:389)
    org.apache.jasper.compiler.Compiler.compile(Compiler.java:288)
    org.apache.jasper.compiler.Compiler.compile(Compiler.java:267)
    org.apache.jasper.compiler.Compiler.compile(Compiler.java:255)
    org.apache.jasper.JspCompilationContext.compile(JspCompilationContext.java:556)
    org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:296)
    org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:295)
    org.apache.jasper.servlet.JspServlet.service(JspServlet.java:245)
    javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
    note The full stack trace of the root cause is available in the Apache Tomcat/5.5.4 logs.
    AND NOW WHEN just to get rid of such errords i try to include a statement
    <%@ page import="pkg.TestSQLLoad" %> in the jsp page code (and also place the MySQLLoad.class file in a folder called pkg and place it in the same directory where the jsp page is )and make it look like
    <html>
    <head>
    <%@ page import="pkg.TestSQLLoad" %>
    <title>DB Test</title>
    </head>
    <body>
    <%
    TestSQLLoad tst = new TestSQLLoad ( );
    tst.init();
    %>
    <h2>Results</h2>
    User <%= tst.getUser() %>
    Pwd <%= tst.getPassword() %>
    Id <%= tst.getID() %>
    </body>
    </html>
    now when i run it i get the following errors:
    exception
    org.apache.jasper.JasperException: Unable to compile class for JSP
    Generated servlet error:
    Only a type can be imported. pkg.TestSQLLoad resolves to a package
    An error occurred at line: 12 in the jsp file: /testdb/test-db.jsp
    Generated servlet error:
    TestSQLLoad cannot be resolved or is not a type
    An error occurred at line: 12 in the jsp file: /testdb/test-db.jsp
    Generated servlet error:
    TestSQLLoad cannot be resolved or is not a type
    org.apache.jasper.compiler.DefaultErrorHandler.javacError(DefaultErrorHandler.j ava:84)
    org.apache.jasper.compiler.ErrorDispatcher.javacError(ErrorDispatcher.java:328)
    org.apache.jasper.compiler.JDTCompiler.generateClass(JDTCompiler.java:389)
    org.apache.jasper.compiler.Compiler.compile(Compiler.java:288)
    org.apache.jasper.compiler.Compiler.compile(Compiler.java:267)
    org.apache.jasper.compiler.Compiler.compile(Compiler.java:255)
    org.apache.jasper.JspCompilationContext.compile(JspCompilationContext.java:556)
    org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:296)
    org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:295)
    org.apache.jasper.servlet.JspServlet.service(JspServlet.java:245)
    javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
    in response to the above error i have even tried placing the MySQLLoad.class directly in the testdb folder along with the jsp page without keeping it in a package named pkg and then importing directly as <@page import="MySQLLoad" %>
    that too gave me the following errors
    org.apache.jasper.JasperException: Unable to compile class for JSP
    Generated servlet error:
    The import TestSQLLoad cannot be resolved
    An error occurred at line: 12 in the jsp file: /testdb/test-db.jsp
    Generated servlet error:
    TestSQLLoad cannot be resolved or is not a type
    An error occurred at line: 12 in the jsp file: /testdb/test-db.jsp
    Generated servlet error:
    TestSQLLoad cannot be resolved or is not a type
    org.apache.jasper.compiler.DefaultErrorHandler.javacError(DefaultErrorHandler.j ava:84)
    org.apache.jasper.compiler.ErrorDispatcher.javacError(ErrorDispatcher.java:328)
    org.apache.jasper.compiler.JDTCompiler.generateClass(JDTCompiler.java:389)
    org.apache.jasper.compiler.Compiler.compile(Compiler.java:288)
    org.apache.jasper.compiler.Compiler.compile(Compiler.java:267)
    org.apache.jasper.compiler.Compiler.compile(Compiler.java:255)
    org.apache.jasper.JspCompilationContext.compile(JspCompilationContext.java:556)
    org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:296)
    org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:295)
    org.apache.jasper.servlet.JspServlet.service(JspServlet.java:245)
    javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
    and if i do not use the statement <%@ page import="MySQLLoad"%> then also i get the errors like
    org.apache.jasper.JasperException: Unable to compile class for JSP
    An error occurred at line: 11 in the jsp file: /testdb/test-db.jsp
    Generated servlet error:
    TestSQLLoad cannot be resolved or is not a type
    An error occurred at line: 11 in the jsp file: /testdb/test-db.jsp
    Generated servlet error:
    TestSQLLoad cannot be resolved or is not a type
    org.apache.jasper.compiler.DefaultErrorHandler.javacError(DefaultErrorHandler.j ava:84)
    org.apache.jasper.compiler.ErrorDispatcher.javacError(ErrorDispatcher.java:328)
    org.apache.jasper.compiler.JDTCompiler.generateClass(JDTCompiler.java:389)
    org.apache.jasper.compiler.Compiler.compile(Compiler.java:288)
    org.apache.jasper.compiler.Compiler.compile(Compiler.java:267)
    org.apache.jasper.compiler.Compiler.compile(Compiler.java:255)
    org.apache.jasper.JspCompilationContext.compile(JspCompilationContext.java:556)
    org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:296)
    org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:295)
    org.apache.jasper.servlet.JspServlet.service(JspServlet.java:245)
    javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
    THE 2nd Method:
    in my second method i did the same changes in the web.xml and server.xml
    then i took a jsp page with the following code:
    <%@ page import="javax.sql.*,java.sql.*,javax.naming.*,com.mysql.jdbc.*" %>
    <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
    <HTML>
    <HEAD>
    <TITLE> trial doc </TITLE>
    </HEAD>
    <BODY>
    <h1>Trial Document</h1>
    <% InitialContext context=new InitialContext( );
    DataSource dataSource=(DataSource) context.lookup("java:comp/env/jdbc/testdb");
    Connection conn=dataSource.getConnection();
    Statement stmt=conn.createStatement();
    ResultSet rset=stmt.executeQuery("select * from user");
    if (rset.next()){
    %>
    <table width="100%" border="1">
    <tr align="left">
    <th>name</th> <th>password</th><th>id</th>
    </tr>
    <%
    do {
    %>
    <tr><td> <%=rset.getString(1)%> </td>
    <td><%=rset.getString(2) %></td>
    <td><%=rset.getString(3) %></td></tr>
    <%
    } while (rset.next());
    %>
    </table>
    <%
    } else{
    %>
    No results from query
    <%
    rset.close();
    stmt.close();
    conn.close();
    context.close();
    %>
    </BODY>
    </HTML>
    org.apache.jasper.JasperException: Unable to compile class for JSP
    An error occurred at line: 15 in the jsp file: /testdb/Big1.jsp
    Generated servlet error:
    The type Connection is ambiguous
    An error occurred at line: 15 in the jsp file: /testdb/Big1.jsp
    Generated servlet error:
    The type Statement is ambiguous
    An error occurred at line: 15 in the jsp file: /testdb/Big1.jsp
    Generated servlet error:
    The type ResultSet is ambiguous
    org.apache.jasper.compiler.DefaultErrorHandler.javacError(DefaultErrorHandler.j ava:84)
    org.apache.jasper.compiler.ErrorDispatcher.javacError(ErrorDispatcher.java:328)
    org.apache.jasper.compiler.JDTCompiler.generateClass(JDTCompiler.java:389)
    org.apache.jasper.compiler.Compiler.compile(C

    thanx for ur response
    as u said that the problem is more of a jsp page not getting compiled....
    me also pointed towards the similar situation providing all the surrounding situations
    which i have met and gone through
    i m still thinking that problem may b in the tomcat's server.xml and web.xml as well
    so better if u plz guide me in that regard
    regards,
    kuldeep

  • Apple Have Serious Problems With 10.7.5

    Apple have very serious problems with their software and they do not have the courage to openly admit this to their customers. My company has been dedicated to Apple and all that is good. We have 2 Imacs, I macbook Pro, 1 mac Mini, 1 mac mini server, 1 ipad, 4 iphones and peripheries. I am on the verge of placing them all on a heap and putting a sledgehammer to them all because I am certain that 10.7.5 is such a corrupted release that even Apple technicians cannot help. My company has been on more and more get around fixes that are becoming more and more complicated by the minute. For the last 4 weeks I have been working 8 to 8 daily including some of the weekends to try and fix things. I have had the pleasure (genuinely) of working for two days following a knowledgeable Apple Technicians instructions to resolve a cloud issue and as of today I sit with one imac completely unusable with all sorts of errors and malfunctions - all software based. Other symptoms on other hardware include error messages saying the computer restarted due to a problem with the computer - even though we are carrying out clean shutdowns or restarts; inconsistent acceptance of passwords to i cloud on most equipment but in particular as highlighted above; nearly all applications opening on restart (I do know how to shut that off - in theory!!!!!!!); frequent and very lengthy beachballs; keychain is an absolute mess, slowdowns to the extent that I have to work on three machines to get the minimum of work done; and other random malfunctions or error messages. Apple's positive attitude to its customers used to be second to none. It seems to me that software (and hardware) releases are now too rushed and Apple do not care about software failures but rely on customers to troubleshoot the glitches for them and do so under warranty or more likely care plan support at further cost to the customer.
    Just look at all the questions being asked by customers via web searches on the above issues and more. Lots of questions, no reliable fixes, and certainly no interest shown by apple to resolve the issues - in fact Apple have adopted the say and do nothing approach.
    I love the products and have been a loyal ambassador to Apple but now my stress level, and the inability of my company to engage its business put me on the verge of taking every item my company owns with an Apple logo and at least gaining some satisfaction by placing them all in a heap and smashing the lots with a sledgehammer (deliberate repeat as this is now a realistic option)
    It used to be a pleasure to use the products, and efficient. I am not looking for help on these matters as an Apple technician is working very hard with us but I feel he is as frustrated as us. We are nowhere nearer resolving our problems and almost daily there are other glitches emerging.
    Apple are losing their way. They must listen to the directions given them by their customers frustrations. 

    What happens when you click the button?

  • A serious problem with Mac OS X

    Dear Mac Community
    Since I bought my first iPod (a 3G), I have been a fan of Apple. For years, I had wanted to make a switch to the Mac. About a month ago, I finally decided it was time to leave the M$ world, and bought a Mini.
    My overall experience has been nearly flawless, with no crashes, truly amazing apps that are mac only (like QS, adium, spotlight and the whole iLife bundle, to name a few) and a very good looking interface.
    You may've noticed the word "nearly" on the previous paragragh, and it's there for a reason. There is one serious problem I can't solve. I am Brazilian, and therefore, I speak and write mostly in Portuguese. But OS X has no support for the Brazilian layout keyboard. I have been after a solution since day 1 with my Mac, but all I have managed to find out is that there are tons of pages in the web about Portuguese speakers complaining that their keyboards don't work properly. Apparently, this has been an issue since Mac OS 10.0, and until Tiger there isn't a solution for it.
    There are many different hacks to try to solve this, and I've tried every one, but they are either buggy, or don't work properly with non-universal apps (including word), or aren't 100% accurate on the keys placement.
    The fact is, I write a lot for school, and I need a Brazilian layout keyboard. And my parents, who were also seriously considering switching, work a lot with translations, so it is even more important for them to have the right layout.
    I am going to send a complaint for apple regarding this, but I'm skeptical that I'll get a solution, since this has been a known issue for a long time.
    Sincerely
    Daniel

    There is another major problem with the layout I'm currently using which I forgot to say:
    - I can type accented letters with almost no problem (á, à, ó, é, etc), except for "è" (e + `), which shows up simply as "e".
    "That seems very strange to me. It could be something related to layout id's, which can easily be changed. Let me know if mine works with Word (I assume you are talking about Word2004 rather than the old WordX?)."
    I've checked that more carefully, and here's what I've come up with: Word doesn't change the layout to US, it simply stops recognizing the 12th key (the extra one) which is responsible for "/" and "?" (and therefore is fairly important)
    btw, I'm using Word 2004
    "Thanks. Feel free to email me details and screenshots if you like. Since no one outside Brazil is likely to have the special keyboard with 12 keys on the bottom row, it's somewhat difficult to build and test layouts like this. (tom at bluesky dot org).
    Try the one called winbrazabnt73.keylayout, which tries to put in the extra key. "
    There is one problem with your layout, which is the fact that no app recognizes the 12th key responsible for "/" and "?" (including Pages, which doesn't have this problem with the other layout I'm using).
    On the other hand, your layout manages to type the "è", whereas my other layout doesn't.
    In the site you provided above in this thread (
    http://m10lmac.blogspot.com/2007/02/fixing-brazilian-keyboard-layout.html), there is an image of different kb layouts available in Windows and OS X. If you could make the Windows Brazilian ABNT and it worked with Word, all my issues would be solved, since that's exactly the layout I'm looking for.
    BTW, thanks for all the support
    Best regards
    Mac Mini 1.83 GHz Core Duo 1 GB Ram 80 GB HDD Mac OS X (10.4.8)

  • Serious problems after Mavericks installation with External Drive Lacie P9220.

    Experiencing serious problems after Mavericks installation with External Drive Lacie P9220 1TB. Mac Finder totally locked!
    I had to format the External hard drive with a Windows PC (fat32), then format again with my IMac (mac Journal.) and hopefully restored data from time machine backup.
    So far so good but system looks unstable. Some software were not able to write on the hard drive.Some strange things happens. With Mountain Lion never had an even minor issue.
    I read many discussion regarding problems with WD, just wondering if anyone had the same problems with Lacie and if there is any tip to solve the
    problem.
    Many thanks.
    Marco

    Thanks very much for your reply.
    Unfortunately I couldn't find a solution because the article refers to whom have configured the drive with included software and drivers that came with the drive.
    This is not my case, I never used any third party soft ...only OS X disk utility ...
    best
    marco

  • FDK and FM 8: Internal Error: 8004, 6343724, 8484240, 0. FrameMaker has detected a serious problem a

    I use FDK9 and FrameMaker 8. I used Visual C++ 2008 Express Edition and Microsoft SDKs to compiled sample FDK hello.c program, C:\Program Files\Adobe\FDK9\samples\hello. It compliled just fine without error or warning message. I registered the hello.dll to fminit directory and added the line: "hello=Standard, Greets user at startup,fminit\hello.dll, all" to maker.ini. When I brought up FrameMaker I got error message:
    Internal Error: 8004, 6343724, 8484240, 0. FrameMaker has detected a serious problem and must quit.
    A file named fminit\hello.dll has been generated which contains
    information that may help Frame development improve the product for future releases.
    Please describe your recent actions and send this, along with the generated file,
    to [email protected] Due to the volume of feedback, we are unable to respond to technical questions.
    For support, please refer to http://www.adobe.com/support.
    Please help.
    Thank you,
    Thai Nguyen

    Thai,
    Here is what Wikipedia says:
    "In April 2003, Microsoft introduced a minor upgrade to Visual Studio .NET called Visual Studio .NET 2003, codenamed Everett (for the city of the same name). It includes an upgrade to the .NET Framework, version 1.1, and is the first release to support for developing programs for mobile devices, using either ASP.NET or the .NET Compact Framework. The Visual C++ compiler's standards-compliance was improved, especially in the area of partial template specialization. Visual C++ Toolkit 2003 is a free version of the same C++ compiler shipped with Visual Studio .NET 2003 without the IDE, though it is no longer available and now superseded by the Express Editions. The internal version number of Visual Studio .NET 2003 is version 7.1 while the file format version is 8.0."
    I think you should be OK with the later compiler. I don't know what is causing the crash, though. Perhaps you might consider setting up a new workspace according to the instructions in the Windows guide, then add hello.c to it, and see what happens. That would at least let you know if there is a compatibility problem with the sample, or if your current setup will simply not allow FDK9 development for FM8.
    By the way, there is a Yahoo group dedicated to FDK development. If you don't get an answer here, consider posting there. Some of the users on that list are considerably smarter than me about these types of issues.
    http://groups.yahoo.com/group/Frame_dev/
    Russ

  • Serious problem with Ipod touch 4g

    Hi.
    Sorry form my bad english but i have a serious problem with my Ipod.
    Couple days ago my Ipod touch 4g was little bit weted on rain(just couple drops on screen and maybe little bit in headphones and dock connectors) When  saw this, i putted Ipod in rice for 72 hours.
    After being wet i not try ot tuned on or charge, just stay in rice. After that i try tuned on. but the device isnt'starting.
    When putted oncharge, and after 2 hours i pushed sleep and home buttons and he turned on. On the display had a "z" or other name sig-sag symbol,
    later i readthis meeans battery is fully discharged and it's need from couple hours to charge. Butwhen i saw this symbol, on the display in upper corner have a little spot(maybe moisture),and putted in rice for other 24 hours. On nextday try to charge and turned on, but this time the ipod isn't turned on. Even can't start recovery or dfu mode.
    My question is - did wet and not warking Ipod is normal to be not recognises by pc?-  even date recovery programs cant'recognised him.
    Also the important is condition on my cabble. Its verry bad condition, and even before weting Ipod,ismaking problmes wih charging.
    Its posible problem is cabble?
    Pleasa help.

    Try:                                               
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable       
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • Serious problem: EJB not accessible after exception thrown

    Hi All,
    I'm using iAS 6.0 SP3 TestDrive on Solaris. I got a pretty serious problem
    here, which a few of my developers are also experiencing. We notice after an
    EJB (esp. Stateful Session Bean) throws an Exception, the EJB becomes
    unaccesible and the <java.rmi.NoSuchObjectException> is thrown subsequently
    when the same method is called until it is being created again.
    This pose a serious problem to us. Has anyone else encounter the same
    problem, I'll appreciate it very much if you can share with us your
    experience of overcoming it. Our exception classes extends from the
    Exception class and they implements Serializable. Also the Transaction type
    of the EJB, it is set to "Container" and the trans-attribute is set to
    "Required" for all the methods. Anything wrong with that?
    Please help.
    Christopher Lam

    Hi Christopher ,
    It appears that your EJB is throwing a SYstem Exception . A System Exception is a RuntimeExecption or any of its subclasses including EJBException
    The appserver invalidates the reference to the Stateful Session Bean after a runtime exception is thrown because it cannot guarentee the integrity of state of the bean
    Please view the logs to see if there are any runtime exception logged

Maybe you are looking for

  • Error while deploying jsf in jboss

    15:27:16,065 INFO [TomcatDeployer] deploy, ctxPath=/jseface, warUrl=file:/Volumes/Development/jboss/server/default/tmp/deploy/tmp62404jseface.war/ 15:27:17,278 INFO [FacesConfigurator] Reading standard config org/apache/myfaces/resource/standard-face

  • Access to external drives and removable over FTP

    does anyone know how I can make access to /volumes/* available over FTP? I need one of them (/volumes/Maxtor USB HDD/) on windows often, but also on my mac it's not that useful if I have to unmount if from my mac and the use in on windows, and then c

  • My husband and i have i phones after the recent update all our contacts have come together when in the past they were seperate

    My husband and i have i phones but after the last update our contacts have merged when previously they were seperate, can you help?

  • CMYK to CMYK conversion Dmax warning

    Found an error in the way Photoshop converts from one CMYK profile to another CMYK profile.... When converting from RGB or LAB to CMYK, photoshop will follow the Dmax settings of the CMYK profile you are converting to.  However, if you convert from a

  • Gnome 3.2 totem suspend during playback

    Since I updated to gnome 3.2 including totem 3.2 my notebook goes into suspend (turns off monitor) after 10 minutes. I have the setting set in totem (you can acutally only choose if video or video and audio should disable screensaver). This was diffe