Server 2008. How do I create a task to turn the server on at a specific time?

I'm running Server 2008 R2 Standard, SP1.
The electricity is scheduled to be turned off in my building for a couple hours over night.
I can shut the server down, but was wondering if there was a way to 'schedule' my server to turn itself on at a specific time the following morning?
Thank you

Hi,
Windows cannot turn itself on. it can resume sleep, but even then relies on the underlying hardware to do the boot.
i would recommend checking whether the BIOS (or EFi for that matter) supports scheduled boots 
Alternatively, you can check BIOS whether you can configure the powerstate the computer needs to be in after power is restored; most computers do support that.
MCP/MCSA/MCTS/MCITP

Similar Messages

  • How do I create a Public Group on the Calendar Server?

    How do I create a Public Group on the Calendar Server?
    <P>
    Anyone can create Private Groups or Member Only Groups. You must be given
    administrative rights to create Public Groups on the Calendar Server. The
    Calendar Server Admin (SYSOP) can give anyone rights to create Public Groups by
    using the uniadmrights tool.
    <P>
    Go to /users/unison/bin/
    and run the uniadmrights
    tool. Some sample syntax:
    <P>
    To list all users with administrative rights:<P>
    % uniadmrights -ls -host yourhostname
    <P>
    To give John Smith, a user on node 10000, rights to administer Public Groups:<P>
    % uniadmrights -e "S=Smith/G=John" -add -pgrp -n 10000
    <P>
    In Calendar Server 4.0, you also have the option of using the Admin Server GUI
    to assign Administrative
    rights (instead of using the command-line method) by going to User Management,
    Administration Rights.
    <P>
    With the proper administrative rights, log into the Calendar Client. Go to Options,
    Manage Groups to create a new group. Choose PUBLIC from the dropdown window,
    add your users and/or resources and click OK to create the Public Group which
    can be seen by all users on the local Calendar Server.

    The following is info that I found in another post that I have been trying to follow.
    MrHoffman      New England
    Re: Configure DNS - OS X Server Next Steps
    Feb 13, 2011 6:36 AM (in response to Jimbooooooo)
    You're setting up internal DNS services, you referenced your ISP DNS servers and you should not have, and now those servers have no translations for your hosts. This is a common misconfiguration.
    See [configuring DNS on Mac OS X Server|http://labs.hoffmanlabs.com/node/1436] for how to set up your internal DNS server.
    And if there are any references to your ISP DNS servers here (within your client settings, within your server settings, your Airport settings, etc), then you're usually going to have DNS and connectivity problems. You're running a server now, so you'll be running your own services, and (particularly because of NAT here) referencing only your own DNS server(s).
    You may be setting up external DNS (if and when you need that), but that should happen after you set up your internal DNS. The above article has a link to setting up external DNS, when you get around to that, if/when you need in-bound connections into your LAN.

  • How do i create a mail box in the SMTP server thru a java program

    How do i create a mail box in the SMTP server thru a java program. If it is possible thru a java program.pls suggest a mail server compatible for the above possibility to work.
    pls help ....

    Please let me know if it is not at all possible to
    create a user account automatically thru a program
    (java) in a mail server... how does yahoo work
    then..does he manually add a user to the mail
    server...By talking to a web server not a mail server.
    >
    Is not there any mail server that will allow us to
    create mailboxes for my java program.. how do the
    other web account services work..
    As I said mail servers do have management interfaces. You need to find one and then determine what the management interface is.

  • How do I create a task in Automator

    How do I create a task in Automator? I don't know AppleScript, and just plinking around with it I have not had any luck.
    I'm finding that anything I want to do in Automator is not quite covered by the stock tasks within the application. I'd like to add comments to a goup of photos, but cannot. I'd like to go through my junk folder in email, show the long headers and forward the SPAM to the FTC, but cannot, etc. There are not the right tasks available.
    Can anybody help me?

    Brooks,
    Most of the Automator Actions are designed to do something you have to do by hand on your Mac. Adding comments is already automated in iPhoto with the Batch Change menu command. What you want to do in Mail I believe is already automated by setting up a Mail Rule in Preferences.
    There are many other tasks that Automator can do that are very useful. For instance, it's easy to make a batch printer app. Click on Finder in the Library column of Automator, then double-click on "Print Finder Items" in the Action column. Save this as an Application on your desktop. Any printable files dropped on the app will be sent to the printer.
    Kevin

  • How can i create multiple accounts but use the same itunes?

    how can i create multiple accounts but use the same itunes?

    Hi iCloud is Making Me Go Crazy,
    You will need to create a new Apple ID for your GameCenter and iCloud services.  You can continue to use the current Apple ID you share with your Mom for access to iTunes Store purchases if you wish. 
    Using your Apple ID for Apple services
    http://support.apple.com/kb/HT4895
    Frequently asked questions about Apple ID
    http://support.apple.com/kb/HT5622
    Cheers,
    - Judy

  • How do I create a new calendar for the current year, using last years calendar's birthday's/photos and comments from the lower pages?

    Each year for the past 5 years I make a family calendar and send copies to all he family members around the globe.  I hate that I have to recreate all the birthdays and special occasions from scratch, and re-drag all the photos onto these dates, in the lower half of the page of each month on the new calendar.  How can I create a new calendar for the current year and port all of these photos/comments into the new calendar from last years calendar, to save having to redo all this work!!  I am not talking about the upper half page of the photos only...I am referring to the calendar page of each month.
    Thanks in advance. 
    Colin

    Welcome to the Apple Discussions. Open iWeb so you see your original site in the left hand pane. Use the File->New Site menu option to create a new site. Give it the name you want.
    Now select a page in your original site and type Command+D. That will duplicate the page. Drag the duplicate page down to the new site and rename it as needed. Do that for the other pages you need in the original site.
    OT

  • How can i create a new item in the app "health"?

    how can i create a new item in the app "health"? I need a field for documentation of "Waist-to-height ratio", exactly for "circumference".
    It's a matter of common knowledge, that the Waist-to-height ratio (WHtR) has more significance then the Body-Mass-Index (BMI).

    If you mean you want to change a color of a calendar category or create a new one, you cannot do that, what is pre-loaded is what you get and cannot be edited.

  • How do I create a filter that bypasses the in page and goes directly to spam rather to delete?

    How do I create a filter that bypasses the in page and goes directly to spam rather than to delete?

    From your question I'm going to guess you are talking about Mac Mail.
    If you are talking about a RULE then the "Perform the following actions:" would be to select "Move Message" to mailbox "Junk" instead of "Delete Message."
    If you are talking about something else then please give more information.

  • How do I create a context menu in the new CL_SALV

    I like a function xx in context menu. How do I create a context menu in the  CL_SALV ?
    thank you!
    CLASS lcl_event_handler DEFINITION.
      PUBLIC SECTION.
        TYPES: t_proc TYPE zmp_c00_pr_d,
               tt_proc TYPE STANDARD TABLE OF t_proc,
               tt_proces_subpr TYPE TABLE OF ltyp_proces_subpr.
        CLASS-DATA: lr_context TYPE REF TO cl_gui_alv_grid,
        r_selections TYPE REF TO cl_salv_selections,
        lr_menu type ref to cl_ctmenu.
        CLASS-METHODS: main CHANGING ct_zmp_c00_pr_d TYPE tt_proc
                                     ct_proces_subpr TYPE tt_proces_subpr
                                     cv_screen TYPE i.
      PRIVATE SECTION.
        CLASS-DATA lt_zmp_c00_pr_d TYPE TABLE OF zmp_c00_pr_d.
        CLASS-DATA ls_process TYPE zmp_c00_pr_d.
        CLASS-METHODS: handle_double_click
                   FOR EVENT double_click  OF cl_salv_events_table
                   IMPORTING row column,
                   detail
                   IMPORTING l_objkey TYPE zmp_c00_pr_d-objkey.
    ENDCLASS.                    "lcl_events DEFINITION
    * CLASS lcl_event_handler IMPLEMENTATION
    CLASS lcl_event_handler IMPLEMENTATION.
      METHOD main.
        DATA: lr_alv TYPE REF TO cl_salv_table,
              lr_events TYPE REF TO cl_salv_events_table,
              lr_columns TYPE REF TO cl_salv_columns,
              lt_col_tab TYPE salv_t_column_ref.
        FIELD-SYMBOLS <column> LIKE LINE OF lt_col_tab.
        IF r_container IS INITIAL.
          CREATE OBJECT r_container
            EXPORTING
              container_name              = 'CONTAINER'
            EXCEPTIONS
              cntl_error                  = 1
              cntl_system_error           = 2
              create_error                = 3
              lifetime_error              = 4
              lifetime_dynpro_dynpro_link = 5
              OTHERS                      = 6.
          IF sy-subrc <> 0.
            MESSAGE i004(z_pm_tool).
          ENDIF.
    *Für Dynpro 1400
          IF cv_screen = '1400'.
            TRY.
                CALL METHOD cl_salv_table=>factory
                  EXPORTING
    *    list_display   = IF_SALV_C_BOOL_SAP=>FALSE
                    r_container    = r_container
                  IMPORTING
                    r_salv_table   = r_alv
                  CHANGING
                    t_table        = ct_proces_subpr.
              CATCH cx_salv_msg .
            ENDTRY.
            TRY.
    * zeige die Daten
                r_alv->display( ).
                IF sy-subrc NE 0.
                  MESSAGE i001(z_pm_tool).
                ENDIF.
              CATCH cx_salv_msg.
            ENDTRY.
          ENDIF.
    * Für Dynpro 1100
          TRY.
              CALL METHOD cl_salv_table=>factory
                EXPORTING
    *    list_display   = IF_SALV_C_BOOL_SAP=>FALSE
                  r_container    = r_container
                IMPORTING
                  r_salv_table   = r_alv
                CHANGING
                  t_table        = ct_zmp_c00_pr_d  .
            CATCH cx_salv_msg .
          ENDTRY.
          TRY.
    * zeige die Daten
              r_alv->display( ).
              IF sy-subrc NE 0.
                MESSAGE i001(z_pm_tool).
              ENDIF.
            CATCH cx_salv_msg.
          ENDTRY.
    *Ereignisobjekt holen
          lr_events = r_alv->get_event( ).
    ** get the SELECTIONS object
    *r_selections = r_alv->get_selections( ).
    * Interne-Tabelle füllen und an die Methode handle_double_click übergeben
          LOOP AT ct_zmp_c00_pr_d INTO ls_process.
            APPEND ls_process TO lt_zmp_c00_pr_d.
          ENDLOOP.
    * Zeiger auf Container für Kontexmenu
          CREATE OBJECT lr_context
            EXPORTING
              i_parent = r_container.
          DATA: lt_events TYPE cntl_simple_events.
          CALL METHOD lr_context->set_registered_events
            EXPORTING
              events                    = lt_events
            EXCEPTIONS
              cntl_error                = 1
              cntl_system_error         = 2
              illegal_event_combination = 3
              OTHERS                    = 4.
          IF sy-subrc <> 0.
    * MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    *            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
          ENDIF.
    * Interne-Tabelle füllen und an die Methode handle_double_click übergeben
          LOOP AT ct_zmp_c00_pr_d INTO ls_process.
            APPEND ls_process TO lt_zmp_c00_pr_d.
          ENDLOOP.
    * Event: Add Function
          SET HANDLER: on_added_function FOR lr_events.
    * Event: Kontexmenu
    *      SET HANDLER: on_context_menu_request FOR lr_context.
    * Event: Doppelklick
          SET HANDLER handle_double_click FOR lr_events.
    * get the SELECTIONS object
          r_selections = r_alv->get_selections( ).
    * Einzelne Spalte holen
          lr_columns = r_alv->get_columns( ).
    * Doppelklick funktioniert nur auf das Feld OBJKEY
          LOOP AT lt_col_tab ASSIGNING <column>.
            <column>-r_column->set_output_length( 20 ).
            IF <column>-columnname = 'OBJKEY'.
              <column>-r_column->set_visible( 'X' ).
            ELSE.
              <column>-r_column->set_visible( ' ' ).
            ENDIF.
          ENDLOOP.
          IF lt_col_tab IS NOT INITIAL AND sy-subrc <> 0.
            MESSAGE i002(z_pm_tool).
          ENDIF.
        ENDIF.
      ENDMETHOD.                    "main
      METHOD handle_double_click.
        FIELD-SYMBOLS <fs_zmp_c00_pr_d> TYPE zmp_c00_pr_d.
        READ TABLE lt_zmp_c00_pr_d INDEX row ASSIGNING <fs_zmp_c00_pr_d>. " vor dem Changing Parameter der Klasse
    *    READ TABLE ct_zmp_c00_pr_d INDEX row ASSIGNING <fs_zmp_c00_pr_d>.
        IF sy-subrc <> 0.
          RETURN.
        ENDIF.
        IF column = 'OBJKEY'.
          lcl_event_handler=>detail( <fs_zmp_c00_pr_d>-zz_slotid_a ).
        ENDIF.
      ENDMETHOD.                    "handle_double_click
      METHOD detail.
        DATA: lr_alv TYPE REF TO cl_salv_table,
              lt_alv_tab TYPE TABLE OF zmp_p00_sp_d.
    * Subprozess holen
        SELECT * FROM zmp_p00_sp_d INTO TABLE lt_alv_tab
          WHERE objkey = l_objkey.
        IF sy-subrc <> 0.
          MESSAGE i003(z_pm_tool).
        ENDIF.
        TRY.
    * Neu erzeugte Instanz für ALV-Tabellenobjekt holen
            cl_salv_table=>factory( IMPORTING r_salv_table = lr_alv
                                     CHANGING t_table = lt_alv_tab ).
    * Ausgabe Fenster für SubScreens
            lr_alv->set_screen_popup( start_column = 1
                                   end_column = 130
                                   start_line = 1
                                   end_line = 10 ).
    * Anzeige der Daten
            lr_alv->display( ).
            IF sy-subrc <> 0.
              MESSAGE i001(z_pm_tool).
            ENDIF.
          CATCH cx_salv_msg.
        ENDTRY.
      ENDMETHOD.                    "detail
    ENDCLASS."lcl_event_handler IMPLEMENTATION
    Edited by: polaris1 on Dec 15, 2010 12:18 PM

    Can't read that jumble, but suggest you look at the excellent SALV tutorials by Rich Heilman by searching for SALV tutorial on SCN.  You'll find working code and how-to for adding your own functions to SALV.

  • I have a WD 2 tb hard drive that I want to use to back up my Mac Pro quad core.  How do I create a back up startup disk?  Also, when I used Time macine, it only backed up users and not the system or library folders.  Ideas?

    I have a WD 2 tb hard drive that I want to use to back up my Mac Pro quad core.  How do I create a back up startup disk?  Also, when I used Time macine, it only backed up users and not the system or library folders.  Ideas?

    Welcome to Apple Support Communities
    Time Machine should be enough to make a backup of your files. Also, it should back up all folders, so open System Preferences > Time Machine > Options, and make sure that there are no folders included in the excluded items list.
    If you want to create a bootable clone of your hard drive, you need to use an app like Carbon Copy Cloner or the Disk Utility's Restore feature > http://pondini.org/OSX/DU7.html

  • How can i create an indicator to read the RMS value of my FFT using FFT Spectrum (Mag-Phase).vi

    Hai to all,
    how can i create an indicator to read the RMS value of my FFT using FFT Spectrum (Mag-Phase).vi.
    as u can see in my block diagram(attached), i can use statistic to read the RMS value for the data but i cant's use it on the FFT Spectrum (mag-Phase).vi .
    Thank you for helping.
    Attachments:
    block diagram.jpg ‏48 KB

    hafizzuddin wrote:
    thank you for the opinions, for now i am not using any express Vi..
    In the long run you will benefit from this. Anyway is your problem solved, or do you need more help?
    Besides which, my opinion is that Express VIs Carthage must be destroyed deleted
    (Sorry no Labview "brag list" so far)

  • How do you create a new folder in the library folder

    How do you create a  new folder in the library?

    In the user Library? Open Finder and select Go then press the Option key. In the list you will see your user Library folder (underneath Home). Click it to open it. Now you can add a folder inside. You can left click/hold and drag the Library icon at the top of the Finder window to your Finder Sidebar so it's always avaliable.

  • How can i create my own file from the Adobe Export PDF to Word ?

    How can I create my own file from the file of the Adobe Export PDF to Wodrd?

    If there is handwritten content in your PDF then ExportPDF can't convert that to word.
    ~Deepak

  • How do I create a duplicate image inside the same page? Then how do I change the color of that image

    how do I create a duplicate image inside the same page? Then how do I change the color of that image from black to red?

    Hello there!
    Here is one way to create a duplicate image and colorize it. As you can see below, I have one image right now, that I want to duplicate.
    My layers panel looks like below.
    To duplicate your image, click the downward arrow on the right side of your Layer Panel.
    Select Duplicate Layer. This will duplicate the layer that the image is on.
    Select "OK" to approve the duplication.
    As you can now see in the Layers panel, the image is duplicated. The new layer is now at the top of the Layer panel.
    Now to colorize your image, go to Window > Adjustments.
    The Adjustments panel will now be opened. Select the Hue and Saturation icon as seen circled in red.
    The Hue and Saturation propertied panel will be opened. I selected "Colorize", and adjusted the hue and saturation bar to achieve the level red in my photo.
    As you can see below, the image is now red.
    Now i want to make sure only ONE of my image layers is red. I moved the Hue and Saturation layer to only be on top of the bottom layer. The image on the top layer now will not be affected by the red.
    Select the move tool, so I can now move the image layers so we can see both of them.
    With each image layer selected, you can take the move tool and move the images. I moved mine on top of eachother and you can see my red layer (bottom) and the non red layer (top).
    I hope that helps. i have also included helpful links.
    Please post back with any questions,
    Janelle

  • How do you create additional free space on the volume containing the iPhoto library?  I have plenty of HD space.

    How do you create additional free space on the volume containing the iPhoto library?  When attempting to import images from a CD I get an "Insufficient Disk Space" message albeit there is plaenty of additional space on the hard drive.

    How much free space do you have on your hard drive?  Try the following:
    1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
         User/Home/Library/ Preferences folder.
    2 - delete iPhoto's cache file, Cache.db, that is located in your
    User/Home/Library/Caches/com.apple.iPhoto folder (Snow Leopard and Earlier).
    or with Mt. Lion from the User/Library/Containers/com.apple.iPhoto/
    Data/Library/Caches/com.apple.iPhoto folder
    3 - launch iPhoto and try again.
    NOTE: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding down the Option key when launching iPhoto.  You'll also have to reset the iPhoto's various preferences.
    NOTE 2:  In Lion and Mountain Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.

Maybe you are looking for