Server 2008 R2 Windows Server Backup. "Error in backup of Hyper-V.vhd during read: Error [0x80070001] Incorrect function.

Hello,
We are currently using Windows Server Backup to backup three Hyper-V guests running on a Windows 2008 R2 host. Two guests are running Server 2008 R2 and one is running Windows 7. I have the backups going to a dedicated external disk drive.
WSB backs up the two 2008 R2 Hyper-V guests just fine. However, when attempting to backup the Windows 7 Hyper-V guest, I receive the following error:
Error in backup of <Windows 7.vhd> during read: Error [0x80070001] Incorrect function.
I ran a "vssadmin list writers" and all the VSS writers showed "Stable" with no errors. I have plenty of space on the external drive as well. I've read this article:
https://support.microsoft.com/kb/973455?wa=wsignin1.0#workaroundissue12 except that doesn't seem to be what I'm experiencing here.
Anyone have any suggestions?

Hi,
As the other 2 guests could be backed up correctly, the issue should not be the Windows Server Backup feature.
First please refer to this article:
Backing Up and Restoring Virtual Machines
http://msdn.microsoft.com/en-us/library/dd405549(v=vs.85).aspx
Please check if all following requirements are met. Specifically please check if Integration Service is installed.
Backup (volume snapshot) Integration Service is installed and running in the child VM. The service name is "Hyper-V Volume Shadow Copy Requestor".
Windows 2000: Backup Integration Service is not supported.
The child VM must be in the running state.
The Snapshot File Location for the VM is set to be the same volume in the host operating system as the VHD files for the VM.
All volumes in the child VM are basic disks and there are no dynamic disks.
All disks in the child VM must use a file system that supports snapshots (for example, NTFS).
If you have any feedback on our support, please send to [email protected]

Similar Messages

Window SBS server 2008 and window server 2008 R2 on the same domain

Hi all,
I am a person only work for linux system. Recently i work for my company that using microsoft technologie. So i have a lot of trouble. Could you please help me and below are my big troble that i have met:
In my system, i have the first window SBS server 2008 run on our domain. However my organization growth up and we have more than 150 users and mailbox of exchange server 2007. So i do not want to use my sbs server 2008 anymore.
I am going to install a window server 2008 R2 64 bit and join it into the same domain with sbs server 2008. It will be replicate the username, dns, OU and group policy...After that i will tranfer FSMO role to new server and i will demote then remove the
sbs server.
My boss say that i should not use this solution because window server sbs can not run with any other kinds of window server 2008 (R2, standard, enterprise...) and it will automatically shutdown the main server after a couple of days.
Someone have experience can help me. I am so confuse now

Maybe this will also help to better understand the steps involved:
Transition from Small Business Server to Standard Windows Server
http://blogs.technet.com/b/infratalks/archive/2012/09/07/transition-from-small-business-server-to-standard-windows-server.aspx
Migrating away from SBS 2011
http://social.technet.microsoft.com/Forums/en-US/07c58cc4-7d6d-419a-b1a0-439c2cc0c48d/migrating-away-from-sbs-2011?forum=smallbusinessserver
Migrating from SBS 2008 to Windows Server 2012 R2 (NOT Essentials and with NO Exchange)
http://social.technet.microsoft.com/Forums/en-US/1276d2d3-a8f2-4786-82f3-4308a2affb11/migrating-from-sbs-2008-to-windows-server-2012-r2-not-essentials-and-with-no-exchange?forum=smallbusinessserver
And remember, as long as you don't move the PDC to one of the new DCs, you can leave the SBS 2008 up indefinitely. But I would remove Exchange 2007 off it right away once I've migrated the mailboxes and public folders, otherwise
you will get yourself into an Exchange coexistence scenario which is much more complex to configure and support because of the CAS differences, changing the URLs on the old one to "legacy.domain.com," getting a new UC/SAN cert with the correct
names on it, and more. Believe me, you really don't want to coexist them. The only time I've coexisted Exchange versions is during large migrations, such as 500 or more. Otherwise, I just migrate the mailboxes over a weekend and get it done with.
Ace Fekay
MVP, MCT, MCSE 2012, MCITP EA & MCTS Windows 2008/R2, Exchange 2013, 2010 EA & 2007, MCSE & MCSA 2003/2000, MCSA Messaging 2003
Microsoft Certified Trainer
Microsoft MVP - Directory Services
Complete List of Technical Blogs: http://www.delawarecountycomputerconsulting.com/technicalblogs.php
This posting is provided AS-IS with no warranties or guarantees and confers no rights.

Backed up files partially disappear after restore (Windows Server 2008 R2 - Windows Server Backup)

Dear all,
I am experiencing a problem with "Windows Server 2008 R2", using Windows Server Backup.
Here's my setup:
Server: RAID 5 Disk setup
Backup:
By using Windows Server Backup (within Windows Server 2008 R2), C: and D: were fully backed up, with "System State" and "Baremetal Recovery" options selected. Backup went okay without any errors.
Restore:
By using Windows Recovery Environment (booted from Windows Server DVD), C: and D: were fully restored to the original partitions with "System Recovery" option found within Windows RE (without re-formatting partitions during restore). Restore
went OK without any errors. Rebooted, and system has been running fine.
Problem:
After the restore, the system itself seems running OK; no BSOD, no crash, no visible errors.
However, our client insisted some files (around 6 to 7) which are related to the propriety software has "disappeared" right after System Recovery.
Question:
Since Windows Server Backup is using "Volume Shadow Copy" technology which enables "live backup" of the running system, is it possible that some files will disappear (=restore error) after
System Recovery?
I cannot really find any errors or warnings related to Windows Server Backup in the event log, through. No Windows-backup errors. No VSS errors, too.
Do anybody have experienced this kind of problem in the past? Any suggestion will be greatly appreciated.

Thank you for your reply, Ms. Mandy.
To make things clear, let me explain to you briefly:
1. The "missing data" was backed up with "full system backup".
2. After a system restore from the above backup image, as you mentioned, partitions has been overwritten with the partions' backup data in the Backup Data Set taken by Windows Server Backup. No error with backup. No error after restore, and reboot - system
has been running fine.
3. Although there was a report that the affected files(about 7 java exectables) were missing after the above restore operation, other aspect of system was running fine at the time of the report.
4. I have checked the original backup data set - and voila, there ARE files which seems to gone after restore.
5. When I used Windows Server Backup "on" Windows Server 2008 R2 normal environment (= NOT Recovery environment from DVD) and selectd ONLY these affected files to restore, these files could be RESTORED successfully, without any errors. SO... data
was property backed up.
> The recovery will overwrite the partitions so files created after the backup point will be missing.
I understand, and this is not the case this time, because the affected files are already present in the backup data set (= I have mounted the backup data as VHD, and I could clearly see them present in the mounted VHD file)
Plus, these files are completely restoreable via "selective file restore" in Windows Server Backup.
Things I want to know/confirm:
> The recovery will overwrite the partitions
If I understand this correctly, in case that the files in question are already present in the backup data set, these files SHOULD be restored after full system restore, right? (If these files could not be restored, Windows Server Backup SHOULD show some errors.)
What do you think, Ms. Mandy? :)
Jo

[Windows Server 2008 R2] [Windows Server Backup] How to remove an old backup set

Hello,
long time ago I made a backup of some files of a server on a network location running manually a command like this one:
"wbadmin start backup -backupTarget:\\Server1\Backup\MyServer\wbadmin_Effe -include:F: -user:DOMAIN\myself -password:******** -quiet"
Now this network location is no more available because that machine is definitely broken.
I have no problems to run and create backups on a local drive or on other network locations.
My only problem is that now, in the main window of Windows Server Backup, when i click "View details" under "All Backups", I can still see that backup as the oldest available... that's a bit annoying.
It appears also if I run the command "wbadmin GET VERSIONS".
Does anybody know how can I remove this backup version set from my server?
Thanks,
Alex.

Hi Alex,
The command will remove all backups existed on your server. If you cannot get Shadow Copy ID and there are "good" backups existed on you server, you could not remove the old backup versions.
How to completely delete the backup file from network share and clean up the backup version for the server?
http://social.technet.microsoft.com/Forums/windowsserver/en-US/2ecc1c25-9308-4c50-be37-9762913cab61/how-to-completely-delete-the-backup-file-from-network-share-and-clean-up-the-backup-version-for-the?forum=windowsbackup
Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Migrating ADRMS from Windows Server 2008 to Windows Server 2008R2

Hi all,
I am struggling to find an answer on this, but effectively I need to replace a Windows Server 2008 (x86) server running ADRMS with one running Windows 2008 R2 (so I can't do in-place due to architecture differences). It has a separate backend on SQL 2008R2,
but what concerns me is this: "All servers added to an AD RMS cluster must be running the same
version of Windows Server as the first server in the cluster." from here http://technet.microsoft.com/en-us/library/cc771019(v=ws.10).aspx
My plan was to:
Spin up a 2008R2 server.
Backup the ADRMS databases on SQL.
Add it (2008R2) to the existing 2008 ADRMS cluster
Repoint everything to the new 2008R2 (DNS/SCP)
Decommission the old server.
I suspect there's a stage where I need to upgrade ADRMS for the 2008R2 schema, but not quite sure where that would slot in (maybe after I add to the cluster?)
Am I on the right track here? Last thing I want to do is mess up ADRMS.
Thanks in advance.
If this helped you please click "Vote As Helpful" if it answered your question please click "Mark As Answer"
Georg Thomas | Lync MVP
Blog www.lynced.com.au | Twitter
@georgathomas
Lync Edge Port Check (Beta)

I managed to get it working by following the steps I had mentioned above:
Spin up a 2008R2 server.
Backup the ADRMS databases on SQL.
Add it (2008R2) to the existing 2008 ADRMS cluster (it upgrades the schema at this point and the 2008 server no longer works)
Repoint everything to the new 2008R2 (DNS only) - I needed to keep the existing cluster name and you can't change the SCP
Because the customer didn't use a custom FQDN and rather used the server hostname as the URL, I ran into authentication issues, which I believe were caused by Kerberos, so I needed to manually change the priority of authentication on the _wmcs Virtual directory
in IIS to use NTLM first and then Negotiate which solved me having continually being prompted for credentials until I received an unauthorized error)
Decommission the old server.
If this helped you please click "Vote As Helpful" if it answered your question please click "Mark As Answer"
Georg Thomas | Lync MVP
Blog www.lynced.com.au | Twitter
@georgathomas
Lync Edge Port Check (Beta)

Windows Server 2008 R2 Windows Server Backup error 'Volumes larger than 2088958 megabytes cannot be protected'

Backing up 41.4 GB on 930 GB internal drive to a NAS with 5.1 MB used on 929 GB drive.

Hi,
Please try to backup a small file the NAS to see if the issue still exist. In the meantime, try to see if you can backup the 41.4 GB on 930 GB internal drive to a local position.
You could refer to the link below to see if the sector size of the NAS is larger than 512B that could cause the issue.
Windows backup “Volumes larger than” error
http://superuser.com/questions/446449/windows-backup-volumes-larger-than-error
Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

What's the difference between windows server 2008 and windows server 2012 ?

I would be thankful if anyone would give a comparative point of view of both products.

Hope following link will help you to find the right answer. this link will download a pdf file to your computer.
https://www.google.co.in/url?sa=t&rct=j&q=&esrc=s&source=web&cd=3&cad=rja&ved=0CFMQFjAC&url=http%3A%2F%2Fdownload.microsoft.com%2Fdownload%2F2%2FC%2FA%2F2CA38362-37ED-4112-86A8-FDF14D5D4C9B%2FWS%25202012%2520Feature%2520Comparison_Hyper-V.pdf&ei=Fv_RUMHfMsK4rAfsqYDYCA&usg=AFQjCNGhSRusi2Gp7K386Gpu24mzLfbF9Q&sig2=nCWPUQ6Y7aGsNBqKCCed5Q&bvm=bv.1355534169,d.bmk
Regards,
Praveen Kumar (IT consultant)
If you found this post helpful, please give it a "Helpful" vote.
If it answered your question, remember to mark it as an "Answer".
This posting is provided "AS IS" with no warranties and confers no rights! Always test ANY suggestion in a test environment before implementing!

Windows Search Service failing to install on Windows Server 2008 R2 Terminal Server

Hi,
I am unable to install the Windows Search Service on a Server 2008 R2 Terminal Server. I want to install this to enable indexing options within Outlook 2013 for all users.
Server Manager > Add Roles > File Services > Select only Windows Search Service > Install.
The error I receive: "Attempt to configure Windows Search Service failed with error code 0x80070057. The parameter is incorrect."
Thanks,
Bjorn

Hi,
I did the test and could install the Windows Search Service without problem.
Which role did you installed on the terminal server?
Did you try to install it on another windows server?
Regards.
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

How do I run a non-server program on Windows Server 2008

I currently run a synchronization software application on my desktop in order to backup and synchronize over 600GB of data. I would like to install this on our server, which runs Windows Server 2008, but the software does not provide for installation
on this operating system. I continue to receive a message stating that the software may not run properly on Windows Server OS, but it does not allow me to bypass this message. Is there any way to create a partition or trick the software into thinking
that it is running on a different operating system or do I have to abandon Server 2008 and install a basic home operating system in order to run this software? Any help would be tremendously appreciated.
Thanks!

Hi,
According to your description, my understanding is that you want to install an software which is not supported by Windows Server.
Try to install this software in other compatibility mode:
1. Right-click the installation program and select properties.
2. Select Compatibility tab, select the checkbox Run this program in compatibility mode for.
3. try to use different OS to install this program.
Besides, you may right-click the installation program and select Run as administrator.
Above are my personal suggestion and just for your reference. If the problem still exit, I suggest you to connect the software‘s support/form for better help.
If you want to backup date, I suggest you to use Windows Server Backup, you may reference the link below for detailed information:
http://technet.microsoft.com/en-us/library/cc770757.aspx
Best Regards,
Eve Wang

Windows Server 2012 RDS CALS on Windows Server 2008 R2 Licensing Server

Hi,
at the moment we are installing the first couple of Windows Server 2012 in our infrastructure.
Some of them have installed RDS.
Now we are wondering whether it is possible to use our existing Windows Server 2008 R2 licensing server for serving the licenses we have (yes we to have new Windows Server 2012 RDS CALS) or whether we have to install a new host based on Windows Server 2012.
We tried to add the new license to the 2008 R2 licensing server, but it is not possible. The licensing manager's error message: "The license code contains invalid characters or not enough characters."
Is there any other way?
Thanks and regards
Matthias

Hi matt_will_fix_it,
How about Windows 2012 R2 ?
Will a Windows 2012 RD Licensing server provide licences to a Windows 2012 R2 server?
I have not tested it, but it should work. Server 2012 R2 requires the same RDS CAL version as Server 2012. If you try it and have an issue please reply back.
-TP

How to enable high availability on SQL Server 2005 with Windows Server 2008 Enterprise R2

Dear Folks,
I would like to ask you about this thing. I'm working for IT department for bank in Myanmar. Our bank have up to 96 branches across all of Myanmar including H.O. We are using Microsoft SQL Server 2005 with Windows Server 2008 for our banking
information system. My main problem is having to backup and restore the database backup files every time the servers in branches goes down for whatever reasons. I want to deploy this feature of high availability and failover cluster using Windows Server 2008
and SQL Server 2005. Our branches have 2 Servers. One is for Primary and other is for Backup. What I want to do is that, I want to change Backup Server to Primary Server whenever the Primary Server goes down for whatever reasons. All the working data and databases
from Primary will immediately replicated into Backup Server along with all the IP information of Primary Server. Please give me step by step guide for this process.

Try below
http://blogs.msdn.com/b/cindygross/archive/2009/10/23/checklist-for-installing-sql-server-2005-as-a-clustered-instance.aspx
I will recommend you to upgrade SQL server to newer version for support as well as flexibility.
Regards,
Vishal Patel
Blog: http://vspatel.co.uk
Site: http://lehrity.com

Could not able to execute FTP commands in windows server machines 2012/ windows server 2008.

Could not able to execute FTP commands in windows server machines 2012/ windows server 2008.
From windows server 2012 and windows server 2008, Opened port 20,21,22 in firewall bidirectionally. After Establishing connection by passing credentials 230 log in successful.
ftp commands executing getting as " 425 Use Port or PASV first" , "500 Illegal PORT command".
But I could able to do windows client machines like windows 7 and windows 8 with same environment
Note : Firewall ports are opened. have tested by making firewall down to avoid filters.
Pandiyan Muthuraman

Hi Pandiyan Muthuraman,
Did you mean even you disable or open the related port the FTP issue still exist? I found this errors most time occur when we use the ISA firewall and the FTP configured passive
mode, if you have ISA firewall please refer the following KB to fix this issue.
How to enable passive CERN FTP connections through ISA Server 2000, 2004, or 2006
http://support.microsoft.com/kb/300641
The have a specific form for the IIS question, if you have the further IIS related question you can ask in IIS forum.
IIS support forum
http://forums.iis.net/
Thanks for your understanding and support
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Navigation Issue on HC 91, Tools 8.51, SQL Server 2008 on Windows 2008

Hi Guys,
I installed HCM 91 -Tools 851-SQL Server 2008 on Windows 2008 server. App server running perfectly, initiated web server fine.
When I login in n-tier/web via PS userid, navigation to Panels are fine but when I try to click on any page, it gives error IE exception at the bottom – “Error on the page”, page does nothing, no searches and does not display the page.
I tried installation from ground zero the 3rd time last night, followed all the steps and stuck at this point.
I am wondering if anyone has encountered these issues.
I appreciate any pointers.
Thanks in advance.
Cheers
-Vinay

Same question, same answer :
http://peoplesoft.ittoolbox.com/groups/technical-functional/peopletools-l/navigation-issue-on-hc-91-tools-851-sql-server-2008-on-windows-2008-server-3837147
Nicolas.

IDM 7.2 under Windows Server 2008 R2 (SQL Server ): Which NTW ? Which JVM ?

Hello,
We are installing IDM 7.2 under Windows Server 2008 R2 using the database SQL Server 2008 R2.
1/ Which NetWeaver should we use to install the Java Application Server (NTW 7.3 or NTW 7.2)?
Using install guides 7.2rev8, we tried NTW 7.3 but it comes with JVM 1.6 that isn't supported, according to the PAM.
Should we install the AS Java with NTW 7.2 that comes with JVM 1.5 (JVM 1.5 being supported)?
2/ Has someone installed IDM 7.2 under Windows Server 2008 R2 (SQL Server)?
If yes, which NTW was used (7.2 or 7.3)? Which JVM was used (1.5 or 1.6)? Which JDBC drivers (1.2 or 3)?
Thanks a lot for your replies,
Regards.

{quote)For the Java RE are you using 32 or 64 bytes ?{quote)
C:\Users\Administrator>java -version
java version "1.6.0_30"
Java(TM) SE Runtime Environment (build 1.6.0_30-b12)
Java HotSpot(TM) 64-Bit Server VM (build 20.5-b03, mixed mode)
{quote)Which JDBC driver do you use (1.2 or 3.0) ?{quote)
{quote)In the IDM Identity Center, for the dispatchers option tools, how do you fill it ?
We are using :
Path to java exe: E:\usr\sap\ID1\J00\exe\sapjvm_6\bin\java.exe{quote)
C:\Program Files\Java\jre6\bin\java.exe
{quote)Path to jvm.dll: E:\usr\sap\ID1\J00\j2ee\JSPM\sapjvm\jre\bin\server\jvm.dll{quote)
C:\Program Files\Java\jre6\bin\server\jvm.dll
{quote)JDBC driver jar: D:\Microsoft SQL Server JDBC Driver 3.0\sqljdbc_3.0\enu\sqljdbc4.jar{quote)
C:\sqljdbc\sqljdbc4.jar
{quote)JDBC driver names: xxxxxxxxx (can you write us what you use){quote)
com.microsoft.sqlserver.jdbc.SQLServerDriver
{quote)CLASSPATH extension: D:\Microsoft SQL Server JDBC Driver 3.0\sqljdbc_3.0\enu\sqljdbc4.jar{quote)
No Classpath specified

Migrating From Window Server 2003 to Window Server 2012 for Web server deployment and Developmemt Machine is on Window Server 2008

Hi Microsoft Team,
We need your urgent advice and that is also on priority:
Issue Description: We need to migrate from
WINDOW SERVER 2003 to WINDOW SERVER 2012 while the development activity will be carried
under WINDOW SERVER 2008 as DEVELOPMENT BOX.
.NET Framework Version: 3.5 ( For both DEVLOPMENT(WINDOW SERVER 2008) and WEBSERVER(to WINDOW SERVER 2012))
IIS Version: 7.5 (For both DEVLOPMENT(WINDOW SERVER 2008) and WEBSERVER(to WINDOW SERVER 2012))
Need your quick advice Is that configuration feasible for Development and
Deployment (Web Server).
Highly appreciate your response as this will depend which product we need to buy also if you feel any showstopper or concern. Please let us know.

Hi,
As suggested by Tim, in order to get better assistance, we can ask for help in the following IIS forum.
IIS Forum
http://forums.iis.net/
In addition, regarding migrating from Windows Server 2003 to Windows Server 2012, the following blog can be referred to for more information.
Step-By-Step: Active Directory Migration from Windows Server 2003 to Windows Server 2012
http://blogs.technet.com/b/canitpro/archive/2013/05/27/step-by-step-active-directory-migration-from-windows-server-2003-to-windows-server-2012.aspx
Best regards,
Frank Shen

Server 2008 R2 Windows Server Backup. "Error in backup of Hyper-V.vhd during read: Error [0x80070001] Incorrect function.

Similar Messages

Maybe you are looking for