Server grayed out in the console

Hello,
I have several servers which are becoming grayed out in the console very often.
I found the article http://support.microsoft.com/kb/974722 but it did not apply as I have already SCOM 2007 R2 CU7 .
on #1 the event 
Event Type: Error
Event Source: Service Control Manager
Event Category: None
Event ID: 7031
Date: 9/15/2014
Time: 10:24:36 AM
User: N/A
Computer: VOSMARTPUMP1
Description:
The System Center Management service terminated unexpectedly. It has done this 5 time(s). The following corrective action will be taken in 60000 milliseconds: Restart the service.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
is happening after each restart of the healthservice then it becomes event id 7034
Event Type: Error
Event Source: Service Control Manager
Event Category: None
Event ID: 7034
Date: 9/15/2014
Time: 10:25:57 AM
User: N/A
Computer: VOSMARTPUMP1
Description:
The System Center Management service terminated unexpectedly. It has done this 7 time(s).
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
any idea?
Thanks,
DOm
System Center Operations Manager 2007 / System Center Configuration Manager 2007 R2 / Forefront Client Security / Forefront Identity Manager

Hi,
How is antivirus software configured?
Recommendations for antivirus exclusions that relate to Operations Manager
http://support.microsoft.com/kb/975931
What if you reinstall the agent on one server, still the same error?
Same issue here:
http://www.networksteve.com/enterprise/topic.php/scom_2007_r2_-_Health_Service_will_not_keep_running/?TopicId=62587&Posts=0
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Similar Messages

  • How do I keep BI Publisher running when I log out of the console in linux?

    I am using the standalone version of BI Publisher and I want to keep it running even after I log out of the console. I have a script that starts it so I typed 'nohup start_bipub.sh &' but when I log out it shuts down anyway. I started my apache server the same way and it still runs after I log out so the only thing I can think of is that X is being killed due to the logout and BI Pub needs it. Is there anyway to keep this process running?
    Thanks,
    Denise

    It depends on the data path from the tower you're using, through NATs and many routers, all the way back to the server. Which depends on your current location and sheer luck.
    For some users, the data path stays alive for 30-45 minutes at a time... thus the phone only has to ping the server that often for push to work. Their push doesn't use much battery.
    Other users have the misfortune of being connected via pathways that only keep a connection alive for 5-10 minutes. Their iPhones eat battery like crazy, and they usually end up switching to a 15-30 minute timed fetch instead.

  • HT4623 I updated my mini, but some of my apps are no longer available. One of them I purchased from the Apple store.  They are grayed out with the word "waiting" underneath the app.  Any suggestions?

    I updated my mini, but some of my apps are no longer available. One of them I purchased from the Apple store.  They are grayed out with the word "waiting" underneath the app.  Any suggestions?

    If there are multiple apps trying to download at once, only one can download at a time and the rest say "Waiting" until it is then their turn. Try this. Double tap the icon of the Waiting app, and it should resume the download.
    How to Solve the Problem of An iPad App Download Stuck on “Waiting”
    http://ipadacademy.com/2012/06/how-to-solve-the-problem-of-an-ipad-app-download- stuck-on-waiting
    How To Get Rid Of Your iPad App Download Frozen Problem
    http://www.sidelineapple.com/how-to-get-rid-of-your-ipad-app-download-frozen-pro blem-and-not-lose-years-of-your-life-video/
    Another thing to try - Turn the iPad Off & then back ON.
    If that doesn't work:
    •  Log out of your iTunes store account.  Go to Settings > Store > Sign Out Then press the Home button.
    • Then press and hold the Home and Sleep buttons simultaneously and don't release them when it brings up the Turn Off screen; keep holding them until the Apple logo appears.
    • After restart, the Waiting should be gone.
     Cheers, Tom

  • After editing an image in Photoshop it appears grayed out inside the media browser

    After editing an image in Photoshop it appears grayed out inside the media browser when I try to import into Facebook (ie.).
    What has to be done in order for me to be able to select my edited images from Photoshop whithin any media browser?

    function(){return A.apply(null,[this].concat($A(arguments)))}
    LarryM01 wrote:
    ...save it as sRGB?
    Would you care to comment on why there is an advantage to do this little extra job?
    Perhaps you don't want to hear from me, I don't know.
    I'll answer just this one little question.  Try to get your mind around what color management does, I promise it does make sense (outside of unexplained problems on particular computers).
    You want to save your web image with the sRGB profile embedded because some Internet browsers are color managed, and with an embedded profile it's more likely someone will see your image colors just as you intended.
    The assumption is that a lowly windows user with a cheap monitor and Internet Explorer will be seeing any image you save as "roughly" sRGB anyway.  Tagging the image with sRGB only affects those with color-managed browsers.
    You're looking for the most possible consistency for the viewing audience.
    -Noel

  • Why is the camera icon grayed out in the text message screen so that I cannot text a picture on my iPhone 5?

    Why is the camera icon grayed out in the text message screen so that I cannot text a picture on my iPhone 5? I have an unlocked TMobile phone. My husband has the same phone, plan, and set up; his picture messages work fine.

    Check this it maybe the problem
    Settings > Messages > MMS Messaging > is it on?
    Hope that helps

  • I'm trying to Export my completed video; however, the Export option is grayed out in the File Menu.

    I'm trying to Export my completed video; however, the Export option is grayed out in the File Menu.  What am I not doing?

    GregEW2
    Thanks for the follow up.
    From what you wrote, you have Premiere Elements 10. Is that on Windows 7 64 bit or other. For now I will assume Windows 7 64 bit. If version 10 is on Windows 7 or 8 64 bit it is a 64 bit application running in the 64 bit system which makes it possible for full use of the 64 bit resources. That is good news especially when you are trying to take a large project to completion.
    You set up the project preset in the new project dialog to match the properties of your source media. That setting directs the program to establish the right space in the Edit Mode Monitor for editing purposes. That project preset also directs the program as to what disc menu set (s, w, or hd) will be available to you in the disc menu section. The project preset also has more subtle effects on the project settings.
    What is you plan for exporting your Timeline, export to file saved to the computer hard drive or burn to disc DVD or Blu-ray? Keep in mind that the setting for the project preset do not prohibit variations in the export choice under most conditions. If you post a description of your source media and how you would like to export it, I will offer some very specific guidelines on that.
    If you do go the purchased book route, please try for one which is specific to your version 10. There has been a marked change in interface starting with version 11. Often principles remain the same from version to version, but features do not. And, I always write "It is very frustrating to be armed with principles when you cannot find a feature."
    I suggest that you start with the Premiere Elements 10 Help PDF and then decide what next.
    http://help.adobe.com/en_US/PremiereElements/10.0/Using/index.html
    Also check out
    http://tv.adobe.com/show/learn-premiere-elements-10/
    A lot of these links that say version 10, roll over to 11.
    Steve Grisetti, the moderator of this forum, writes books on Premiere Elements if you are interested in the purchased book route.
    Hope the information above is helpful. Above all do not hesitate to ask if you have questions on your Premiere Elements workflow or need clarification on anything written.
    Thanks.
    ATR
    Add On...
    I did not see SG's post before I submitted this reply to you.

  • MRP Type is grayed out in the material master

    Hi all,
    I am creating material on my own.The thing is that the MRP type is grayed out in the MRP 1 view.I want to maintain the MRP type. Can any one help
    Regards
    Mano

    Dear Mano
    You have not specified which field you want to edit / maintain data.  Anyway, please do the following:-
    Go to material master, select the MRP view which you want to make as editable.  Now place your mouse on the required field and press F1.  Make a note of the Table and Field name.
    Now go to OMS9, press F4 in Field sel.group so that some fields will be displayed.  Select the above field  and press Enter key.  Below you will find the options to change as Hide, Display, Reqd Entry, Opt entry.  Make the required changes and now check the material master.  Like this, you can make changes for other fields also.
    thanks
    G. Lakshmipathi

  • I'm using Entourage 2008 v 12.3.5 and lost ability to SEND.  Tried many small email tests.  Server continues to leave time out message.  "An operation on the server timed out. The server may be down, overloaded, or there may be too much net traffic.

    I'm using Entourage 2008 v 12.3.5 and lost ability to SEND.  Tried many small email tests.  Server continues to leave time out message.  "An operation on the server timed out. The server may be down, overloaded, or there may be too much net traffic."  Comcast tells me server is not down all other network activity is fine.  WHat's up with this?

    Starting earlier today, this also became my problem - can receive but not send in Entourage. The account settings are correct in Entourage - I even created a new account.  My Mac running 10.7.5 won't read the original Office : MAC 2008 disk, so I can't do a fix or reinstall from the disk.
    This is not an issue if I log onto the Comcast site.
    And so, I started using Mail but, unlike Entourage, Mail won't import my Entourage info.
    Argh...  :-(

  • Why is my iPhone 5 number grayed out in the iMessage?

    Why is my iPhone 5 number grayed out in the iMessage?

    Take a look at this Apple page, it has tons of tips that will help improve battery life -> Apple - Batteries - iPhone

  • Should be the bluetoot symbol grayed out when the bluetooth is turned "ON"or it should be highlighted in white like rest of the active symbols are? Please unswer this simple question clearly. Thank you.

    My blutooth symbol on the new i-Pod 2 is grayed out when the option is turned "ON". Shouldn't be highlighted white like the rest of the symbols are?

    when blue tooth is turned off in settings, the symbol does not show at all.  when BT is turned on in settings, but there is no connected device, it will show the symbol gryed out.  When BT is on, and connected to an active device, it will show as bright white.

  • Where has the "Clean up" "Clean up by" option gone for organizing folders? I just upgraded to OS X Maverick today and noticed it was no longer a option when right clicking; also, it is grayed out in the view tab.

    Where has the "Clean up" "Clean up by" option gone for organizing folders? I just upgraded to OS X Maverick today and noticed it was no longer a option when right clicking; also, it is grayed out in the view tab.

    Hi i had this problem myself what you need to do is..
    right click and press 'show view options'
    then go to the arrange by and sort by options near the top and change them both to none
    click save as defult at the bottom
    then when you right click the clean up by options will now be there
    hope this helps

  • Safari 7 has some pictures grayed out with the word FLASH in the middle. How do I fix?

    safari 7.0.2 has some (not all) pictures grayed out with the word FLASH in the middle. How do I fix?

    If you click on them, does anything happen ?.
    You may have the clicktoflash extension installed : check Safari menu - Preferences - Extensions

  • When I type in my account password, the password "dots" gray out and the message "There has been an error" appears.  I cannot access my computer in any way.  Any help would be appreciated.  Thank you.

    When I attempt to sign in to my administrator (or other) account  the computer hesitates, the password "dots) gray out, and the message, "There has been an error" appears.  I have tried the usual methods of password recovery but nothing has worked so far.  I would appreciate any help you can give me.  Thank you very much for your attention to my problem.

    JD1100 wrote:
    I have MacKeeper installed
    Oh dear.
    Many users will see references to an application called MacKeeper on various web sites and via pop-ups on their browser. Not only is it expensive for what it purports to do (freeware applications that do the same or more are readily available), it can sometimes install itself without the user realising it, and it can be very tricky to get rid of.
    Most positive reviews of it have been found to have been paid for by Zeobit (developers of MacKeeper) in the form of ‘free upgrades’ etc. For example (posted by fellow contributor Softwater), on their Facebook page and on their webpage they have this apparent endorsement from UNC Charlotte:
    https://discussions.apple.com/servlet/JiveServlet/downloadImage/2-18670779-12515 7/450-259/Screen+Shot+2012-06-17+at+17.04.04.png
    Softwater contacted the Director of IT at the College of Arts and Architecture UNC Charlotte, about whether they endorse MacKeeper and his response, quoted here, was:
    No, please do not download and install MacKeeper. We have seen problems with this software in the past.
    MacKeeper has been described by various sources as highly invasive malware* that can de-stablize your operating system, adding that it is unethically marketed, with a history of making false advertising claims, by a company called Zeobit and a rip-off.
    For more details about Zeobit’s alledgedly fraudulent advertising and paid-for ‘reviews’, and their dubious marketing practises, read this:
    http://stemmings.com/the-truth-about-mackeeper-scam/
    Further opinion on it and how to uninstall MacKeeper malware can be read here:
    http://applehelpwriter.com/2011/09/21/how-to-uninstall-mackeeper-malware/
    MacKeeper have recently said that the uninstaller from here:
    http://applehelpwriter.wordpress.com/2011/09/21/how-to-uninstall-mackeeper-malwa re/
    now works.
    This is also worth reading:
    http://www.reedcorner.net/news.php/?p=245

  • Certain drives are grayed out from the user when they try to access files

    I partioned the main HD with SL server. The main partition holds the OS and other related software, left plenty of space for growth. The second partition I created 2 folders that have in one Indesign files, the other images. When certain users try to log in it's grayed out as if it's mounted on the desktop, which it's not. When try again it shows up. All other volumes that are not part of the partition have no problems. Could it be the fact that Im using the Main HD partioned? This problem is occurring when the designers need to gain an image to place in Indesign.

    I'd be looking at permissions issues first.

  • Print out to the console

    I'm writing a program to update something to the console. Let's say I have some fields like this:
    client1 Name1 ID1 value1
    client2 Name2 ID2 value2
    the number of client could be changed, but not much. I would like to update the value field on the console, say, every 5 seconds.
    How I could do that? It's much like some Linux/Unix program as top. System.out.println surely doesn't do the job.
    Thanks in advance for your help.

    Well, I'm new to gui application on linux. Couldyou
    tell me in a few words how to do it? Which libraryI
    should use? Thanks,Look into swing, it's a part of the standard library.Swing couldn't run on Linux/Unix without X server requirement. What I need is a terminal based application.

Maybe you are looking for

  • Determining spectral density of poisson process (carson theorem)

    Has anyone ever determined code for working out the spectral density (or equivalent) of a Poisson process, based on Carson theorem (or a variant thereof)? It doesn't have to be in Labview, but that would be the easiest (or VB).Message Edited by Jo on

  • My e mail on my  iPhone 4 is not working

    i have verizon

  • Confused with Info to hook tv to Mac

    I know there are lots of postings on this but I'm confused, I'm a senior very non tech person.  I have a Sony Bravia TV, I think a 2008 model, does have HDMI ports tho.  And I have a mid 2012 MacBook Pro.  I don't really want an Apple TV, would rathe

  • Charging my nano on a Windows ME system

    Is it possible for me to charge my iPod nano on a computer that does not have iTunes set up on it, and runs on Windows ME? It DOES have a USB port.

  • Regarding smartforms page format

    i create a page format of size 240mm width and 93mm height and go through the transaction SPAD and i done the device type setup also correctly. but when i try to take the print out it is showing the following error as follows. exception : send_error