Server Locator Service Failed to Start

Received Event ID:4380 on single Exchange Server (once part of a DAG but no more - removed other servers and the DAG). Error reads: 'net.tcp://huntsvr.huntelectric.local:64337/Exchange.HighAvailability'. Error A TCP error (10013: An attempt was made to access
a socket in a way forbidden by its access permissions) occurred while listening on IP Endpoing=0.0.0.0:64337.
The above error is paired with the following error as well:
Event ID: 2121. The Microsoft Exchange Replication service failed to start the TCP listener. Error: System.Net.Sockets.SocketException: An attempt was made to access a socket in a way forbidden by its access permissions ..."
The above two errors are joined by this error:
Event ID: 4383. Microsoft Exchange Server Locator Service communication channel faulted. State: Faulted
And the next error appears as well:
Event ID: 4379. Microsoft Exchange Server Locator Service stopped.
These 4 errors repeat every minute. Any suggestions of where to find a resolution?
Thanks,
Michael

Hi Michael,
The above errors indicate the following two things:
1. An existing service is using port 64337.
2. Port 64337 is blocked by firewall.
I recommend you use the commands below to check if port 64337 is used by a program.
netstat -aon | findstr "64337"
tasklist | findstr "64337"
What's more, here is a thread for your reference.
Exchange 2010 SP3 RU1 event id 4380 and 4383 logged every minute
http://social.technet.microsoft.com/Forums/exchange/en-US/892721dc-f2cc-45da-ba5f-b24a9a2ef749/exchange-2010-sp3-ru1-event-id-4380-and-4383-logged-every-minute
Hope it helps.
If you need further assistance, please feel free to let me know.
Best regards,
Amy
Amy Wang
TechNet Community Support

Similar Messages

Oracle9i AS Reports Server Installation - Service Failed to start

Hi All,
I have installed Oracle9i Apps Server on Win 2000. Installation was successful and the forms are configured correctly but REPORTS SERVICE FAILED TO START. Everytime, I try to start Rerports Service, it fails and the following lines are written to the REP60_Server.Log file in [OracleHome]/REPORT60/Server directory,
*** 2002-04-29 09:24:48 -- Server is starting up.
*** 2002-04-29 09:24:48 -- Daemon failed to listen to port
Does anyone has any idea of what is going on? Your help will be very much appreciated. Thank you.
Regards
The Oracle Reports Team
http://otn.oracle.com/

Have you made any changes to the TNSNAMES.ora in ORA_HOME/NET80/ADMIN using NET8. If you did, usually it screws up the entry for reports server because it is not the standerd format. Check the Report_server entry manually then try starting up reports server.
Hope this helps
Peace

IPod Service Failing to Start and Priveleges

Before
When iTunes 6.whatever was out, my iPod did not work at all, but I continued using iTunes for music.
iTunes 7
I plug my iPod in and got the common message "iPod is corrupted. Press restore to restore it", etc. It never works.
Why it doesn't work
It brings the message "Servie 'iPod Service' failed to start. Verify that you have sufficient privledges to start system services"
Any help? How do I get these 'priveleges'?
? Windows XP

I had been experiencing this error for a long time since iTunes 7 released. I tried different ways to resolve it. Untill today, I found a possible resolution and sucsessfully install iTunes 7.3.1.3. I think that might be helpful.
First, remove all previrous itunes and install the lates t release. You will stuck when trying to start iPod service. Open c:\program files\iPod\bin. You will see iPodService. Double click it. If you got an error about a .dll file (mine is setupapi.dll), remember it and you can continue....
2nd, put xp disk in dvd/cd-rom. Open C:\WINDOWS\system32 and locate the .dll file and rename it. This moment, your cd is running trying to rebuild the dll file just renamed.
3rd, when cd-rom stop running. Retry to start service again. Good luck, I hope you can resolve it.
I checked some microsoft KB for this error. This might happen when xp system been customized or dll file corrupted.

When I download itunes, it says that Ipod Service failed to start. I checked the services under task manager and when I try to start it, it says access denied. How to I get access and for the ipod service to start and run?

Please help. My ipod classic could not be recognised by itunes when I connect my ipod to PC. Previously it has been recognised before I updated. This was a while ago now and so I removed all apple files and re installed the latest itunes but am having the same problem.
When I download itunes, it says that Ipod Service failed to start. I checked the services under task manager and when I try to start it, it says access denied. How to I get access and for the ipod service to start and run?

Some anti-virus programs (e.g., McAfee) have this rule that can be invoked under the "maximum protection" settings: PREVENT PROGRAMS REGISTERING AS A SERVICE. If that rule is set to BLOCK, then any attempt to install or upgrade iTunes will fail with an "iPod service failed to start" message.
If you are getting this problem with iTunes, check to see if your anti-virus has this setting and unset it, at least for as long as the iTunes install requires. Exactly how to find the rule and turn it on and off will vary, depending upon your anti-malware software. However, if your anti-virus or anti-malware software produces a log of its activities, examining the log may help you find the problem.
For example, here's the log entry for McAfee:
9/23/2009 3:18:45 PM Blocked by Access Protection rule NT AUTHORITY\SYSTEM C:\WINDOWS\system32\services.exe \REGISTRY\MACHINE\SYSTEM\ControlSet001\Services\iPod Service Common Maximum Protection:Prevent programs registering as a service Action blocked : Create
Note that the log says "Common Maximum Protection: Prevent programs registering as a service". The "Common Maximum Protection" is the location of the rule, "Prevent programs registering as a service" is the rule. I used that information to track down the location in the McAfee VirusScan Console where I could turn the rule off.
After I made the change, iTunes installed without complaint.

Service 'iPod Service' failed to start and Error 1503

Thanks to all the people who have provided answers posts... they have helped me get to this point!...
I have a slight variation on this issue - an Error 1503...
My original symptom was that I couldn't get iTunes to recognise my iPod so I tried to install 7.2.0.35... and right at the end I got the message about "iPod service failed to start check your permissions"...
I use AVG Free 7.5.472, Sygate Personal Firewall 5.6 and Spybot Search and Destroy 1.4, but for the install I have used msconfig to shut down everything other than iTunes and QuickTime...
When I run services.msc I get 2 versions of iPod Service listed - one as "iPod Service" and the other as"iPodService" (i.e. no space between iPod and Service)... the "iPodService" is started but the "iPod Service" is not and when I try to start it I get a message "Could not start the iPod Service service on Local Computer. Error 1503: The service did not respond to the start or control request in a timely fashion"
Would appreciate any assistance!...
Many thanks in advance...

I had been experiencing this error for a long time since iTunes 7 released. I tried different ways to resolve it. Untill today, I found a possible resolution and sucsessfully install iTunes 7.3.1.3. I think that might be helpful.
First, remove all previrous itunes and install the lates t release. You will stuck when trying to start iPod service. Open c:\program files\iPod\bin. You will see iPodService. Double click it. If you got an error about a .dll file (mine is setupapi.dll), remember it and you can continue....
2nd, put xp disk in dvd/cd-rom. Open C:\WINDOWS\system32 and locate the .dll file and rename it. This moment, your cd is running trying to rebuild the dll file just renamed.
3rd, when cd-rom stop running. Retry to start service again. Good luck, I hope you can resolve it.
I checked some microsoft KB for this error. This might happen when xp system been customized or dll file corrupted.

"iPod Service Failed to Start" message when upgrading iTunes

When upgrading iTunes from Version 7 to the newest version, I got an error message stating "Service, 'iPod Service' failed to start. Verify that you have sufficient priviledges to start system services." So I canceled the download and rolled back to Version 7 again. I did notice that now I'm getting an error message when I start up Version 7, stating that it could not start the iPod service. I just bought an ipod Classic and cannot use it without the latest version of iTunes. Any suggestions? Thanks in advance!

Some anti-virus programs (e.g., McAfee) have this rule that can be invoked under the "maximum protection" settings: PREVENT PROGRAMS REGISTERING AS A SERVICE. If that rule is set to BLOCK, then any attempt to install or upgrade iTunes will fail with an "iPod service failed to start" message.
If you are getting this problem with iTunes, check to see if your anti-virus has this setting and unset it, at least for as long as the iTunes install requires. Exactly how to find the rule and turn it on and off will vary, depending upon your anti-malware software. However, if your anti-virus or anti-malware software produces a log of its activities, examining the log may help you find the problem.
For example, here's the log entry for McAfee:
9/23/2009 3:18:45 PM Blocked by Access Protection rule NT AUTHORITY\SYSTEM C:\WINDOWS\system32\services.exe \REGISTRY\MACHINE\SYSTEM\ControlSet001\Services\iPod Service Common Maximum Protection:Prevent programs registering as a service Action blocked : Create
Note that the log says "Common Maximum Protection: Prevent programs registering as a service". The "Common Maximum Protection" is the location of the rule, "Prevent programs registering as a service" is the rule. I used that information to track down the location in the McAfee VirusScan Console where I could turn the rule off.
After I made the change, iTunes installed without complaint.

Messaging Server 3.6 fails to start even though the Administration Server says "Success"

Messaging Server 3.6 fails to start even though the Administration Server says
"Success". There are no entries in the log to help explain what has happened.

Any failure to start Messaging Server via Administration should be analyzed by
starting the server with /etc/NscpMail.

# /etc/NscpMail start
19991219004527:Dispatch:Notification:Network Module (IMAP4-Server) Failed the verify environment test.
Module not Loaded.
Startup Problem:
Problem Gaining Unique Lock
Netscape Messaging Server Exiting!

This error is caused by an inability to create the .netscape.mailID file
inside the top level of the postoffice.

# cd /var/spool/postoffice
# ls -la
total 30
dr-x------ 8 nobody nobody 512 Dec 19 01:06 .
drwxrwxr-x 13 root bin 512 Feb 12 1999 ..
drwx------ 2 nobody nobody 1536 Dec 19 01:04 config
drwx------ 2 nobody nobody 512 Dec 19 01:04 control
drwx------ 3 nobody nobody 512 Dec 19 01:04 deferred
drwx------ 2 nobody nobody 512 Dec 19 01:04 hold
drwx------ 2 nobody nobody 5120 Dec 19 01:04 log
drwx------ 2 nobody nobody 512 Dec 19 01:04 messages
-rw-r--r-- 1 root other 183 Apr 12 1999 sie.conf
-rw-r--r-- 1 root other 6 Dec 19 01:04 socket.dat

NOTE: The "." entry is the same as ls -l /var/spool/postoffice

# chmod u+w .
# /etc/NscpMail start
# ls -la
total 32
drwx------ 8 nobody nobody 512 Dec 19 01:04 .
drwxrwxr-x 13 root bin 512 Feb 12 1999 ..
-rw------- 1 nobody nobody 5 Dec 19 01:04 .netscape.mailID
drwx------ 2 nobody nobody 1536 Dec 19 01:04 config
drwx------ 2 nobody nobody 512 Dec 19 01:04 control
drwx------ 3 nobody nobody 512 Dec 19 01:04 deferred
drwx------ 2 nobody nobody 512 Dec 19 01:04 hold
drwx------ 2 nobody nobody 5120 Dec 19 01:04 log
drwx------ 2 nobody nobody 512 Dec 19 01:04 messages
-rw-r--r-- 1 root other 183 Apr 12 1999 sie.conf
-rw-r--r-- 1 root other 6 Dec 19 01:04 socket.dat

Hi,
Please check if you have disabled the autodisconnect feature of the Server service. On Windows servers it can be configured through the Autodisconnect registry key.
\HKLM\SYSTEM\CurrentControlSet\Services\LanmanServer\Parameters\
CIFS and SMB Timeouts in Windows
http://blogs.msdn.com/b/openspecification/archive/2013/03/19/cifs-and-smb-timeouts-in-windows.aspx
Based on the research, as the open shared folder is in a SMB session, the default timeout for SMB session is 15 minutes. If the SMB session is inactive for 15 minutes the server will send a TCP reset to close the SMB connection. Until the
Autodisconnect timer is reached, the server will send an NBT keep-alive packet every two minutes. If a client or server application is not written to properly handle network delays, it may terminate the session prior to the default timeout
period.
For more detailed information, please refer to the thread below:
Session doesn't close Shared Folder
https://social.technet.microsoft.com/Forums/en-US/54f658c8-3d41-4beb-9a2f-47b054a11b7a/session-doesnt-close-shared-folder?forum=smallbusinessserver
Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

SRV2008R2 SP1: Software Protection Service failed to start. RDP not working

Hi folks,
I'm currently working on an issue on a Windows 2008 R2 SP1 Hyper-V Host where RDP from one moment tio the other does not work anymore.
After an investigation I found that the Software Protection Service can't be started. The following events are recorded every few minutes:
Event ID: 1001 - The Software Protection service failed to start. 0x80070002. 6.1.7601.17514
Event ID: 7023 - The Software Protection service terminated with the following error: The system cannot find the file specified.
I searched and found a lot of possible solutions which are shortly listed below:
I have confirmed that the sppsvc.exe file exists and has the proper permissions. Also replaced the file with the same file from another 2008R2 server
Checked the spldr start value via HKLM\System\CurrentControlSet\Services\spldr. This is 0 which should be fine.
Checked the sppsvc paths and settings via HKLM\System\CurrentControlSet\Services\sppsvc. All are correct.
SFC /Scannow + CHKDSK /r
System restore is (off course) not available
Tried to reactivate the server by recording a different product key. Did not work.
Removed the last batch of Windows Updates that were pushed towards the host. We believed it was caused by this but since you don't always need a host but only the VM's hosted on it it was a while ago since we logged in.
Local firewall enabled and disabled. Also
Netstat does not show any listening ports for RDP (3389)
Changed the port to 3390 but this port is not visible as well
Also RDP from the affected machine to localhost does not work
Since I can't find any more options in fixing this issue I'm wondering if someone else has some ideas which I can try. Otherwise a reinstall needs to be done.
Hope to hear from you

Hi,
Based on your description, I noticed that you have tried lots of ways to solve this issue. On current situation,
would you please let me confirm more details?
Type services.msc in RUN to open Services. Then navigate to Software Protection service. If start it manually, what error message will get?
I’m not sure if RDP issue was caused by the Software Protection service. So, would you please let me know the complete error message when RDP didn’t work? Meanwhile, please
open Event Viewer and follow the path: Applications and Services Logs-> Microsoft-> Windows-> TerminalServices-LocalSessionManager and TerminalServices-RemoteConnectionManager. Please check if can find more clues. Those may help us to go further analyze
RDP issue.
Please
perform a clean boot and check if this issue still exists.
If any update, please feel free to let us know.
Hope this helps.
Best regards,
Justin Gu

Windows 8 Hyper-V - Virtual Machine Management Service failed to start the virtual machine

I have Hyper-v running on Dell Precision T3600 with Windows 8 OS. I am trying to start a VM (called Windows8VM) to install Windows 8 in the hyper-v virtual machine, but I keep getting the following message:
"Windows8VM" failed to start.
Failed to start the virtual machine "Windows8VM" because one of the Hyper-V components is not running.
"Windows8VM" failed to start. (Virtual machine ID D670D3BB-9AE2-0453D-9191-EA6EFC242A9C)
The Virtual Machine Management Services failed to start the virtual machine "Windows8VM" because one of the Hyper-V components is not running.
I have turned the hyper-v feature on in the "Turn Windows feature on or off. The BIOS has virtualization enable. Help!!! driving me nuts for a week now.
Nick :(

Okay, I turned off hyper-v, went to bios and enabled Intel TXT(LT-SX) Configuration. Made sure that both Virtualization and VT for Direct I/0 are on. Next, I turned on Hyper-V and I create a brand new Virtual Machine call Windows8 and had
the DVD point to Windows8 ISO file on hard drive. When I clicked on start, it stayed in the Starting status mode for about 5 minutes. Then of course it failed. I looked at the Hyper-V-VMMS log and here is what it output:
Log Name: Microsoft-Windows-Hyper-V-VMMS/Admin
1) Error: The virtualization infrastructure driver (VID) is not running.
2) Info: Found a certificate for server authentication. Remote access to virtual machines is now possible.
3) Info: Successfully started the Virtual Machine migration connection manager.
4) Info: Virtual Machine Management service is started successfully.
5) Info: The WMI provider 'VmmsWmiInstanceAndMethodProvider' has started.
6) Info: The WMI provider 'VmmsWmiEventProvider' has started.
7) Info: The WMI provider 'VmmsWmiInstanceAndMethodProvider' has started.
8) Info: The WMI provider 'VmmsWmiEventProvider' has started.
9) Info: The Integration Services Setup Disk image was successfully updated.
10) Error: The virtual machine bus is not running.
11) Error: 'Virtual Machine Bus' driver required by the Virtual Machine Management service is not installed or is disabled. Check your settings or try reinstalling the Hyper-V role.
12) Error: 'Storage Virtualization Service Provider' driver required by the Virtual Machine Management service is not installed or is disabled. Check your settings or try reinstalling the Hyper-V role.
13) Error: The Virtual Machine Management Service failed to start the virtual machine 'Window8' because one of the Hyper-V components is not running (Virtual machine ID 2B393AF4-7B7E-4243-805B-23C09D20F4FB).
14) Error: 'Window8' failed to start. (Virtual machine ID 2B393AF4-7B7E-4243-805B-23C09D20F4FB)
Nick

The saposcol service failed to start.

Hi everyone:
- We have detected that in our production database system there are two error messages:
1. The saposcol service failed to start due to the following error:
The service did not respond to the start or control request in a timely fashion.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
EVENT ID: 7000
And
2. Timeout (30000 milliseconds) waiting for the saposcol service to connect.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
EVENT ID: 7009
- Both of them have as source the Service Control Manager.
The database system is a Windows cluster where the portal SCS are running with Oracle 9.2.0.5. The OS is a Microsoft Windows Server 2003 Enterprise Edition.
The path to the executable saposcol.exe is:
C:\WINNT\SapCluster\saposcol service
We have tried to uninstall and install the service as in note 82751 (through the windows services window), and the service saposcol is started, but these two errors steel appear.
We have the same structure at Test system and saposcol works properly. We thought if it could be possible that the overloading of the production system was causing a delay in the start of the saposcol service, and then the timeout is reached. Is it possible to increase this timeout, and in this case, will this solve the problem? (if so, how do we do increase it, and in which manner will affect our system?)
Thanks and regards,
Jose Sorli Esteve

hi,
install the saposcol service with administrator account
and change the logon from nt service manager to SAPService<SID> user
if it not works downlod the new one from sap service place
and re install it
regards,
kaushal

Oracle E-business suit Services failed to start Properly

Hi,
I've EBS Installed on my laptop with release 12(base release) on Linux Virtual host. When I tried to up the Application Tier Services; the services are not properly started. It seems to me that OC4J is not getting up proerly. Kindly help me in resolving this error.
Here are the log entries of adstrtall.sh
Executing service control script:
/u01/oracle/TESTEBS/inst/apps/TESTEBS_oraapps/admin/scripts/adopmnctl.sh start
Timeout specified in context file: 100 second(s)
script returned:
You are running adopmnctl.sh version 120.4
Starting Oracle Process Manager (OPMN) ...
adopmnctl.sh: exiting with status 0
adopmnctl.sh: check the logfile /u01/oracle/TESTEBS/inst/apps/TESTEBS_oraapps/logs/appl/admin/log/adopmnctl.txt for more information ...
.end std out.
.end err out.
Setting service Web Entry Point Services to mode 2
Administering services for the service group Web Entry Point Services
Executing service control script:
/u01/oracle/TESTEBS/inst/apps/TESTEBS_oraapps/admin/scripts/adapcctl.sh start
Timeout specified in context file: 100 second(s)
script returned:
You are running adapcctl.sh version 120.6
Starting OPMN managed Oracle HTTP Server (OHS) instance ...
adapcctl.sh: exiting with status 0
adapcctl.sh: check the logfile /u01/oracle/TESTEBS/inst/apps/TESTEBS_oraapps/logs/appl/admin/log/adapcctl.txt for more information ...
.end std out.
.end err out.
Setting service Web Application Services to mode 2
Administering services for the service group Web Application Services
Executing service control script:
/u01/oracle/TESTEBS/inst/apps/TESTEBS_oraapps/admin/scripts/adoacorectl.sh start
Timeout specified in context file: 100 second(s)
script returned:
ERROR : Timed out( 100000 ): Interrupted Exception
You are running adoacorectl.sh version 120.11
Starting OPMN managed OACORE OC4J instance ...
Executing service control script:
/u01/oracle/TESTEBS/inst/apps/TESTEBS_oraapps/admin/scripts/adformsctl.sh start
Timeout specified in context file: 100 second(s)
script returned:
ERROR : Timed out( 100000 ): Interrupted Exception
You are running adformsctl.sh version 120.12
Starting OPMN managed FORMS OC4J instance ...
Executing service control script:
/u01/oracle/TESTEBS/inst/apps/TESTEBS_oraapps/admin/scripts/adoafmctl.sh start
Timeout specified in context file: 100 second(s)
script returned:
You are running adoafmctl.sh version 120.6
Starting OPMN managed OAFM OC4J instance ...
adoafmctl.sh: exiting with status 204
adoafmctl.sh: check the logfile /u01/oracle/TESTEBS/inst/apps/TESTEBS_oraapps/logs/appl/admin/log/adoafmctl.txt for more information ...
.end std out.
.end err out.
Setting service Batch Processing Services to mode 2
Administering services for the service group Batch Processing Services
Executing service control script:
/u01/oracle/TESTEBS/inst/apps/TESTEBS_oraapps/admin/scripts/adalnctl.sh start
Timeout specified in context file: 100 second(s)
script returned:
adalnctl.sh version 120.3
Checking for FNDFS executable.
Starting listener process APPS_TESTEBS.
adalnctl.sh: exiting with status 0
adalnctl.sh: check the logfile /u01/oracle/TESTEBS/inst/apps/TESTEBS_oraapps/logs/appl/admin/log/adalnctl.txt for more information ...
.end std out.
.end err out.
Executing service control script:
/u01/oracle/TESTEBS/inst/apps/TESTEBS_oraapps/admin/scripts/adcmctl.sh start
Timeout specified in context file: 1000 second(s)
script returned:
You are running adcmctl.sh version 120.14
Starting concurrent manager for TESTEBS ...
Starting TESTEBS_0912@TESTEBS Internal Concurrent Manager
Default printer is noprint
adcmctl.sh: exiting with status 0
adcmctl.sh: check the logfile /u01/oracle/TESTEBS/inst/apps/TESTEBS_oraapps/logs/appl/admin/log/adcmctl.txt for more information ...
.end std out.
.end err out.
Executing service control script:
/u01/oracle/TESTEBS/inst/apps/TESTEBS_oraapps/admin/scripts/jtffmctl.sh start
Timeout specified in context file: 100 second(s)
script returned:
You are running jtffmctl.sh version 120.3
Validating Fulfillment patch level via /u01/oracle/TESTEBS/apps/apps_st/comn/java/classes
Fulfillment patch level validated.
Starting Fulfillment Server for TESTEBS on port 9300 ...
jtffmctl.sh: exiting with status 0
.end std out.
.end err out.
Service Group Other Service Group is disabled.
[Service Control Execution Report]
The report format is:
<Service Group> <Service> <Script> <Status>
Root Service Group Oracle Process Manager for TESTEBS_oraapps adopmnctl.sh Started
Web Entry Point Services Oracle HTTP Server TESTEBS_oraapps adapcctl.sh Started
Web Application Services OACORE OC4J Instance TESTEBS_oraapps adoacorectl.sh Failed
Web Application Services FORMS OC4J Instance TESTEBS_oraapps adformsctl.sh Failed
Web Application Services OAFM OC4J Instance TESTEBS_oraapps adoafmctl.sh Failed
Batch Processing Services OracleTNSListenerAPPS_TESTEBS_oraapps adalnctl.sh Started
Batch Processing Services OracleConcMgrTESTEBS_oraapps adcmctl.sh Started
Batch Processing Services Oracle ICSM TESTEBS_oraapps ieoicsm.sh Disabled
Batch Processing Services Oracle Fulfillment Server TESTEBS_oraapps jtffmctl.sh Started
Other Service Group Disabled
Other Service Group OracleFormsServer-Forms TESTEBS_oraapps adformsrvctl.sh Disabled
Other Service Group Oracle Metrics Client TESTEBS_oraapps adfmcctl.sh Disabled
Other Service Group Oracle Metrics Server TESTEBS_oraapps adfmsctl.sh Disabled
Other Service Group Oracle MWA Service TESTEBS_oraapps mwactlwrpr.sh Disabled
ServiceControl is exiting with status 3
from the above logs I can see that OC4J is not properly being up along with form services. when I look at the logs of adoacorectl.log, it gives following output:
[applmgr@oraapps log]$ more adoacorectl.txt
09/12/11-16:16:05 :: adoacorectl.sh version 120.11
09/12/11-16:16:05 :: adoacorectl.sh: starting OPMN if it is not running
opmnctl: opmn is already running.
09/12/11-16:16:05 :: adoacorectl.sh: Starting OPMN managed OACORE OC4J instance
opmnctl: starting opmn managed processes...
#######################################################################3
[applmgr@oraapps log]$ more adformsctl.txt
09/12/11-16:17:45 :: adformsctl.sh version 120.12
09/12/11-16:17:45 :: adformsctl.sh: starting OPMN if it is not running
opmnctl: opmn is already running.
09/12/11-16:17:46 :: adformsctl.sh: Starting OPMN managed FORMS OC4J instance
opmnctl: starting opmn managed processes...
[applmgr@oraapps log]$ more adoafmctl.txt
09/12/11-16:19:25 :: adoafmctl.sh version 120.6
09/12/11-16:19:25 :: adoafmctl.sh: starting OPMN if it is not running
opmnctl: opmn is already running.
09/12/11-16:19:26 :: adoafmctl.sh: Starting OPMN managed OAFM OC4J instance
opmnctl: starting opmn managed processes...
================================================================================
opmn id=oraapps.oranet.com:6200
0 of 1 processes started.
ias-instance id=TESTEBS_oraapps.oraapps.oranet.com
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
ias-component/process-type/process-set:
OC4J/oafm/default_group/
Error
--> Process (index=1,uid=1349138487,pid=8112)
failed to start a managed process after the maximum retry limit
Log:
/u01/oracle/TESTEBS/inst/apps/TESTEBS_oraapps/logs/ora/10.1.3/opmn/OC4J~oafm~default_
group~1
09/12/11-16:20:00 :: adoafmctl.sh: exiting with status 204
It seems to me that system is unable to start properly the OC4J services. Kindly help me to resolve this error. Also the when I tried to access the login page the browser give me internal error. Please also note that both Database and Listener services are up and running.
Regards,
Abbasi.

Have you tried to run AutoConfig and see if you get any errors?
Error
--> Process (index=1,uid=1349138487,pid=8112)
failed to start a managed process after the maximum retry limit
Log:
/u01/oracle/TESTEBS/inst/apps/TESTEBS_oraapps/logs/ora/10.1.3/opmn/OC4J~oafm~default_group~1Any details about the error in this log?
Please see if these docs help.
Oacore Processes Won't Start After Increasing Their Number In Oracle Applications Release 12 In Context.xml [ID 555214.1]
Diagnosing Startup Problems for Apache in Release 12 [ID 1349882.1]
It seems to me that system is unable to start properly the OC4J services. Kindly help me to resolve this error. Also the when I tried to access the login page the browser give me internal error. Please also note that both Database and Listener services are up and running.If the services fail to start then this is an expected behavior.
Can you find any errors in the database log file?
Thanks,
Hussein

The SAProuter service failed to start due to the following error:

I installed the SAP router 710 on windows server 2003 NON_SAP SYSTEM. I installed it successfully using the command:
>ntscmgr install SAProuter -b c:\saprouter\saprouter.exe -p "service -r"
But when trying to start the service I am facing this error:
"SAP router service failed to start due to the following error: This application has failed to start because the application configuration is incorrect. Reinstalling the application may fix this problem".
I removed and reinstalled it, but again when trying to start the service facing the same error.
Plz help me in resolving this issue and also let me know using which user I need to start the SAPRouter Service(Local System Account or any other account) . Do the needful as the matter is urgent
Thanks in advance
Ali

Hi Anil,
The version that I am using to install is SAP Router 710 on windows 2003 x64, I have to installed the SAP router on non SAP System.
now when I am trying to start the service, it is giving an error as mentioned above.
Plz help
Regards
Ali
Edited by: Mirza Munnawar Ali Baig on Jun 2, 2008 3:48 PM

Trying to install the latest iTunes on my Gateway w/ Windows XP. I keep getting the message "Service 'Bonjour Service' (Bonjour Service) failed to start. Verify that you have sufficient privileges to start system services."

Hi, I'm trying to re-install the latest iTunes on my Gateway w/ Windows XP. I had to update it a while back to put songs on my brother's iPod, but my computer froze halfway through and nothing has worked right since.
I keep getting the message "Service 'Bonjour Service' (Bonjour Service) failed to start. Verify that you have sufficient privileges to start system services."
I looked through older discussions that told me to go to right click My Computer - Manage - Services and Applications - Services - Find Bonjour and restart it.
Well, the only option that I can click on is Start. When I do, it says "Windows could not restart the Bonjour Service service on Local Computer. Error 2: The system cannot find the file specified."
Where do I go from here? Help would be greatly appreciated, I've been trying to fix this for over a year now with no dice. Also, I cannot do a factory reset (last effort) because it says the administor's account is disabled and I do not have the disc.

Sorry if double posting is a no-no here, but I forgot to add that I've already tried disabling Spyware Doctor.

Apple Mobile Device Service fails to start

The last update failed on my window 7 pc,
resulting in me having to try it manually download and install, this also
failed eventually it told me to delete and reinstall, this fails due to the
apple mobile device service failing to start, and asking me if I have
sufficient privileges to start system service, help please

Hi there Jbrashear,
It sounds like you want to know how to restart the Apple Mobile Device Service because of an alert that was displayed when you were trying to update or reinstall iTunes.
The article below will walk you through the process starting or stopping the Apple Mobile Device Service on your PC.
How to restart the Apple Mobile Device Service (AMDS) on Windows - Apple Support
Also, if you haven't already, take a look at this article which walk you through the process of completely removing iTunes and then reinstalling it.
Remove and reinstall iTunes and related software components for Windows Vista, Windows 7, or Windows 8 - Apple Support
Take care,
-Jason

Apple Mobile Device Service failed to start which eventually leads to windows error 193 which never goes away no matter what I do and the dreaded

Mid way through download of I-Tunes after clearing every Apple program from my computer I get "Apple Mobile Device Service" failed to start message. Eventually leading to Windows error 193 (error 7). How do I get Apple Mobile Device Service to start so I do not get error messages and failure of I-Tunes to install?

If you have a 64-bit machine, then try the "for older video cards" version...
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
tt2

Server Locator Service Failed to Start

Similar Messages

Maybe you are looking for