Server slow to start and won't upload files
Server was working fine but now starts rather slow (at least a minute to see the login page) and when I try to add assets nothing happens. I can export assets from the library with no problem, but cannot create new assets. Do I need to re-install?
Thanks in advance for any help.
Go to the Log in the Admin area of the Java GUI. Do you see any repeating messages? Your system could be looping on something. That's the first place to look.
Similar Messages
-
Over the last week, since the problems loggin into the password server that authenticats the CC program login, the muse application is very slow to start and slow to resond to commands. Like its in molasses.
My system has not changed, only the normal windows updates have been applied.
Has anyone else seen this please ??Bad form answering my own question, but I think I found the culprit, I installed, beacuse I thought it was a good think and might be useful, Google drive onto my system. After deinstalling this program, the sluggishness that I experienced within Muse, went away.
As this was the only new thing that I had installed, I think that it was the problem, -
Oracle Fulfillment server does not start and also my concurrent manager is
The oracle Fulfillment server does not start and also my concurrent manager is down, when ever iam trying to start them i getting error.
even i restarted my laptop many times
Iam using WINXP on my laptop.
Pls help someone
hsawwan
Posts: 11,859
Registered: 03/13/06
Re: oracle Fulfillment server and concurrent manager problem
Posted: Oct 13, 2008 9:26 AM in response to: user578071 Reply
What is the error?
What does CM log file say?
Please run cmclean.sql and try to start the CM then.
Note: 134007.1 - CMCLEAN.SQL - Non Destructive Script to Clean Concurrent Manager Tables
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=134007.1
where should i run in apps schema or some other schema, where can i find the log
as iam using r12Duplicate thread ..
oracle Fulfillment server and concurrent manager problem
Re: oracle Fulfillment server and concurrent manager problem -
MacBook suddenly very slow to start and operate
Sudenly last week my MacBook becomes very SLOW to start and to operate. Until last week it was working fine.
I do not believe to have perform anything abnormal and what is new is just the normal updating of the Softwares that is performed automaticlly every week.
I tried to shut down and restart several time.
I tried several time to reinstall Mac OS 10.6.8
I checked the hard disk with Disk utility and it results OK.
What to do ?
Thanks
MarcRight or control click the MacintoshHD icon. Click Get Info. In the Get Info window you will see Capacity and Available. Make sure you always have a minimum of 15% free disk space.
Why Is My Mac Running So Slow? [MacRx] | Cult of Mac -
I have a Seagate Slim Portable 500 GB USB 3.0 external hard drive that worked great with my Macbook Pro 13" Retina but gets ejected and won't show files on any iMac. My Macbook Pro and the two different iMacs I tried it on were all using Mountain Lion, so the only difference was the iMac versus Macbook Pro.
I just tried this, no luck...
I connected a different USB cable, still the same problem. Tried both cables with the problematic hard drive on two different computers, still the same problem.
At this point I assume I'll probably need professional help in saving the files, thanks for the assistance. -
Hi, I need Photoshop Organizer to stop automatically start and try to organize files when I insert a card in the reader. How do I do that?
Hi,
Which operating system are you running on?
Which version of Photoshop Elements are you using?
The automatic running is usually invoke by your operating system. For instance in Windows 7, go to the control panel and select Autoplay. There, look for the action when pictures are detected - it is probably set to elements. Set it as you want.
Brian -
Firefox slow to start and websites won't load?
Setup: Windows Vista. Firefox 4.0.1. McAfee Total Protection 2011. Wireless home network.
As of yesterday everything worked well. Tonight I am having problems 1) connecting to the internet - I have to reconnect to my router before it accesses the internet 2) Firefox either doesn't start or is very slow 3) when it does finally slow, all the websites eventually time out and won't load.
Last night I extended my McAfee - didn't have to d/l or install anything and earlier today my computer did some kind of update. The only way I can get any websites to open is to shut off the firewall in McAfee, then things seem to work fine but I don't want to leave it off for obvious reasons. Oh and I did set up a new Windows user profile for my kids but I don't see how that would really affect anything.
Is there some kind of setting I need to change? Any suggestions would be appreciated!See "Hang at exit":
*http://kb.mozillazine.org/Firefox_hangs
See "Firefox hangs when you quit it":
*https://support.mozilla.org/kb/Firefox+hangs -
Why does my Mac Mini running on Mavericks so slow to start and load apps?
Why does my Mac Mini running on Mavericks take so long to start and load apps?
1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the behest of a stranger. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts 51 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports 'com.autodesk.AutoCad com.evenflow.dropbox com.google.GoogleDrive' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n\t(%s)\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;5p;6p;8p;12p;' ' {sub(/^ +/,"")};NR==6;NR==13&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/root/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1000) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/d;/(etc|Preferences)\//s/^\.\/[^/]+//p;' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| ","||kMDItem'${p[35]}'=");sub("^.."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[9]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/ { next;} /%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]" "$1;b=b$1;} END { if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ +B/{ s/.+= |(-[0-9]+)?\.s.+//g;p;} ' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / /{$0="'"${p[28]}"'"};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil PlistBuddy whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '-c Print /L*/P*/loginw*' '-c Print L*/P*/*loginit*' '-c Print L*/Saf*/*/E*.plist' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' '-c Print\ :'${p[35]}' 2>&1' '-c Print\ :Label 2>&1' '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'Beac|caug|dead[^bl]|FAIL|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,[lps]*.conf,pam.d,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}* .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' -i4TCP:0-1023 com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' );N1=${#c2[@]};for j in {0..8};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;A2 0 $((N1+1)) 2;C0;A1 0 $N1 1;C0;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A1 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D23 14 2 48 43;D13 4 5 32 1;D22 4 4 50 0;D13 14 3 49 5;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "syntax error," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with "Model Identifier." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed. -
Message Server cannot be started and throw ERROR: MsSetWorkDir: getcwd
When I would like to start the ERP SAP instance by startsap or by MMC, below error message is found:
(1138942) New Child Process created.
(1138942) Starting local Command:
Command: ms.sapECD_DVEBMGS11
pf=/usr/sap/ECD/SYS/profile/ECD_DVEBMGS11_mdev01
[Thr 1] Fri May 28 17:55:56 2010
[Thr 1] ***ERROR => MsSetWorkDir: getcwd (13: Permission denied) [msuxserv_mt. 274]
[Thr 1] ***LOG Q0I=> MsSetWorkDir, getcwd ( getcwd 13) [msuxserv_mt. 280]
ThrRecMtxUnlock: PANIC: #unlock > #lock, tag: "not set"
So it caused the message sever cannot be started and cannot connect.
Is there any required services need to be enabled or
which directory or file permission need to be set in order to fix this problem?
As our AIX server implemented security hardening on OS/Application level already.
System Information:
Server: Power 7 AIX OS 6.1
SAP: ERP 6.0 EHP4 SR1 / NW 7.0 (ABAP)
Database: Oracle 10.2.0.4
Below are exctracted from dev_ms:
trc file: "dev_ms", trc level: 1, release: "701"
[Thr 1] Fri May 28 17:30:53 2010
[Thr 1] WLM Tag 'ECD/MSG' successfully set for this process
[Thr 1] MsSSetTrcLog: trc logging active, max size = 20971520 bytes
systemid 324 (IBM RS/6000 with AIX)
relno 7010
patchlevel 0
patchno 11
intno 20020600
make: multithreaded, Unicode, 64 bit, optimized
pid 1323234
[Thr 1] ***LOG Q01=> MsSInit, MSStart (Msg Server 1 1323234)
[msxxserv_mt. 1853]
[Thr 1] SigISetDefaultAction : default handling for signal 20
[Thr 1] load acl file = /usr/sap/ECD/SYS/global/ms_acl_info
[Thr 1] MsGetOwnIpAddr: my host addresses are :
[Thr 1] 1 : [10.24.60.13] mdev01 (HOSTNAME)
[Thr 1] 2 : [127.0.0.1] loopback (LOCALHOST)
[Thr 1] 3 : [192.168.24.13] 192.168.24.13 (NILIST)
[Thr 1] MsHttpInit: full qualified hostname =
mdev01.housingauthority.gov.hk
[Thr 1] HTTP logging is switch off
[Thr 1] set HTTP state to LISTEN
[Thr 1] MsHttpOwnDomain: own domain[1] = housingauthority.gov.hk
[Thr 1] ms/icf_info_server : deleted
[Thr 1] *** I listen to port sapmsECD (3611) ***
[Thr 1] *** I listen to internal port 3911 (3911) ***
[Thr 1] *** HTTP port 8111 state LISTEN ***
[Thr 1] CUSTOMER KEY: >I1980732359<
[Thr 1] build version=701.2008.03.06
[Thr 1] Fri May 28 17:31:01 2010
[Thr 1] MsHttpReadUrl2: H-1 url = /sap/public/icf_info/urlprefix (403
Forbidden)
[Thr 1] MsHttpReadUrl2: H-1 url = /sap/public/icf_info/logon_groups
(403 Forbidden)
Signal 15 encountered.
=> 64 bit R/3 Kernel
=> 64 bit AIX Kernel
=> Heap limit = unlimited
=> Stack limit = 4294967296
=> Core limit = 1073741312
=> File size limit = unlimited
=> Heap address = 0x0x110b9f780
=> Stack address = 0xfffffffffffecc0
=> Stack low = 0xfffffffffffc3d0
=> Stack high = 0xffffffffffff820
=> Stack Trace:
poll() at 0x9000000001428f4
SiPoll() at 0x1000419e4
select__10SISEL_POLLFiPUi() at 0x10000499c
selectInt__10NISEL_IMPLFiPUiPUc() at 0x100050c5c
select__10NISEL_IMPLFiPUi() at 0x100050a34
NiSelSelect() at 0x10004eb18
MsSRqWaitFor() at 0x1000c5784
MsSLoop() at 0x1000cb1b0
nlsui_main() at 0x1000d1ec0
=> CPU Registers:
msr = 0xa00000000000d032 iar = 0x09000000001428f4
ctr = 0xffffffff00000000 lr = 0xffffffffffffffff
xer = 0x00000000ffffffff cr = 0x0000000000585000
r00 = 0xffffffffffffffff r01 = 0x0fffffffffffecc0
r02 = 0xffffffffffffffff r03 = 0xffffffffffffffff
r04 = 0xffffffffffffffff r05 = 0xffffffffffffffff
r06 = 0xffffffffffffffff r07 = 0xffffffffffffffff
r08 = 0xffffffffffffffff r09 = 0xffffffffffffffff
r10 = 0xffffffffffffffff r11 = 0xffffffffffffffff
r12 = 0xffffffffffffffff r13 = 0x00000001102cb7d8
r14 = 0x0000000000000003 r15 = 0x0ffffffffffff8a0
r16 = 0x0ffffffffffff8c0 r17 = 0x0000000000000003
r18 = 0x0000000000000010 r19 = 0x000000011002e280
r20 = 0x0000000110044318 r21 = 0x00000001101025b0
r22 = 0xfffffffffffffffb r23 = 0x00000001100442b8
r24 = 0x0000000000000000 r25 = 0x000000011001df44
r26 = 0x0000000000004e20 r27 = 0x0000000000004e20
r28 = 0x0000000000000000 r29 = 0x0000000000000002
r30 = 0x09001000a0083f38 r31 = 0x0fffffffffffffe0
[Thr 1] Fri May 28 17:35:34 2010
[Thr 1] ***LOG Q0E=> SigIGenAction, signal ( 15) [sigux_mt.c 1067]
[Thr 1] ***LOG Q02=> MsSHalt, MSStop (Msg Server 1323234)
[msxxserv_mt. 6021]
Signal 6 encountered.
=> 64 bit R/3 Kernel
=> 64 bit AIX Kernel
=> Heap limit = unlimited
=> Stack limit = 4294967296
=> Core limit = 1073741312
=> File size limit = unlimited
=> Heap address = 0x0x110b9f780
=> Stack address = 0xfffffffffffecc0
=> Stack low = 0xfffffffffffc3d0
=> Stack high = 0xffffffffffff820
=> Stack Trace:
poll() at 0x9000000001428f4
SiPoll() at 0x1000419e4
select__10SISEL_POLLFiPUi() at 0x10000499c
selectInt__10NISEL_IMPLFiPUiPUc() at 0x100050c5c
select__10NISEL_IMPLFiPUi() at 0x100050a34
NiSelSelect() at 0x10004eb18
MsSRqWaitFor() at 0x1000c5784
MsSLoop() at 0x1000cb1b0
nlsui_main() at 0x1000d1ec0
=> CPU Registers:
msr = 0xa00000000000d032 iar = 0x09000000001428f4
ctr = 0xffffffff00000000 lr = 0xffffffffffffffff
xer = 0x00000000ffffffff cr = 0x0000000000585000
r00 = 0xffffffffffffffff r01 = 0x0fffffffffffecc0
r02 = 0xffffffffffffffff r03 = 0xffffffffffffffff
r04 = 0xffffffffffffffff r05 = 0xffffffffffffffff
r06 = 0xffffffffffffffff r07 = 0xffffffffffffffff
r08 = 0xffffffffffffffff r09 = 0xffffffffffffffff
r10 = 0xffffffffffffffff r11 = 0xffffffffffffffff
r12 = 0xffffffffffffffff r13 = 0x00000001102cb7d8
r14 = 0x0000000000000003 r15 = 0x0ffffffffffff8a0
r16 = 0x0ffffffffffff8c0 r17 = 0x0000000000000003
r18 = 0x0000000000000010 r19 = 0x000000011002e280
r20 = 0x0000000110044318 r21 = 0x00000001101025b0
r22 = 0xfffffffffffffffb r23 = 0x00000001100442b8
r24 = 0x0000000000000000 r25 = 0x000000011001df44
r26 = 0x0000000000004e20 r27 = 0x0000000000004e20
r28 = 0x0000000000000000 r29 = 0x0000000000000002
r30 = 0x09001000a0083f38 r31 = 0x0fffffffffffffe0
[Thr 1] ***LOG Q0E=> SigIGenAction, signal ( 6) [sigux_mt.c 1067]
[Thr 1] ***LOG Q02=> MsSHalt, MSStop (Msg Server 1323234)
[msxxserv_mt. 6021]
Thanks a lot for help.
Edited by: Tommy Lee on May 31, 2010 7:52 AM
Edited by: Tommy Lee on May 31, 2010 7:53 AM
Edited by: Tommy Lee on May 31, 2010 7:53 AM
Edited by: Tommy Lee on May 31, 2010 7:54 AM
Edited by: Tommy Lee on May 31, 2010 7:55 AM
Edited by: Tommy Lee on May 31, 2010 7:58 AMWell, it is definitely a file system issue but of course it won't be an nfs issue if you have a local mount point. I resolved this issue in UNIX by unmounting the file system is question.
I didn't realize how important the . and .. directories are to SAP executables.
In my /usr/sap/<SID> path, only "." showed up in when using the ls -l command with the <sid>adm user.
As root though, the "." and ".." paths were listed.
After unmounting the file system I saw that the path was owned by roo.system.
Changed the file system ownership to <sid>adm:sapsys with full permissions(probably not needed).
All is well... took quite a while to find this... then of course, found OSS note 1917102 which pointed to OSS note 130683 (which had my solution. note title is misleading and I overlooked it at first.)
Hope this saves someone valuable time.
Freddie Cummings -
MacBook Pro is slow to start and shutdown
hi
i have macbook pro 15 inch retina
from laat months its become slow in start up and shoutdown?
why?
how can solve it
tnkshm... that's weird.
Someone at MacRumors suggested to clean the system cache and it seemed to have fixed this issue for him:
sudo chown root:admin / (enter password when asked)
sudo kextcache -system-prelinked-kernel
sudo kextcache -system-caches -
I have an iPhone 4S. Photo stream works for a while but then it will just stop and not upload any photos to iCloud. Rebooting the phone resolves the problem. This happens very often and is frustrating for something that should just work. Once they get uploaded, they are downloaded to other devices without a problem.
Any idea what could be going wrong with it? I hate taking pictures of stuff that I need on my other devices not knowing if they're going to make it there or not.
Thanks!Hey Allistah,
Thanks for the question. After reviewing your post, it sounds like Photo Stream works but stops and a restart fixes it. A frustrating situation for sure. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
iCloud: Get help using My Photo Stream
http://support.apple.com/kb/TS3989
Close the Camera app on the device that took the photo. Photos won't upload from an iOS device to My Photo Stream until you close the Camera app.
Thanks for using Apple Support Communities.
Have a nice day,
Mario -
IPod Mini doesn't show up in ITunes and won't upload songs.
My iPod Mini shows up on my computer, but it doesn't ever show up in ITunes. I am using a computer that already had ITunes installed and was used by my sisters iPod. Does this matter? The manual says ITunes should open automatically and then transfer songs; ITunes doesn't open auto. and won't transfer songs to my iPod. Help!!!
Hi Jessica!
What kind of computer are you using, Windows or Mac?
Windows: http://docs.info.apple.com/article.html?artnum=61711
Mac: http://docs.info.apple.com/article.html?artnum=60950
I hope this helps you, reply to this post if it doesn't. Good luck! -
Network daemon is slow to start and netfs fails, why?
DAEMONS=(syslog-ng network netfs crond sshd alsa)
If I have a network filesystem that needs the network (duh) to initialize
during netfs, it will fail. Why? Because network is taking a while
to actually create the network, and it is doing it asychronously. What I mean is that
the network script completes and the boot process then continues to netfs, but
in actual fact, the network isn't up yet!
If I put code in the network script to make it wait for a few seconds before completing,
in order to allow the actual network to come up, I can get the network to come up
and be ready before netfs runs. And netfs then runs fine and starts it's file systems.
But, why is networking taking so long (like 6 seconds) to start, and why
doesn't it block during the init process, so dependancies will be assured
to have it when they run?
I'm somewhat new to ARCH. Came from Gentoo, don't remember this being an
issue over there.It's wired, and static IP.
However, I forgot to mention that I'm bringing up a bridged interface.
BRIDGE_INTERFACES=(br0)
bridge_br0=(eth0)
br0="br0 192.168.0.40 netmask 255.255.255.0 broadcast 192.168.0.255"
eth0="eth0 0.0.0.0 promisc"
INTERFACES=(lo br0 eth0)
Perhaps herein is the problem.....
Last edited by ristretto (2007-07-24 20:19:02) -
Worn down. Hours w tech support. Yosemite won't upload files
II'm die hard mac person. I think I'm done. I've spent hours with tech support. Nothing fixed. I've done clean install. sisconnected bluetooth. You name it. I have clients waiting for files that will only upload at snails pace. Nothing works. Yosemite? It's a joke. I cannot believe this is happening. I'm disgruntled. Mad. And frustrated. New modem. New router. New Mac router which was slower. Frustrated?? Yes. My clients are mad. Top off my day my new iPhone 6 (which I ordered through Apple Store and was not treated well) Wld not make calls today. No one else on verizon in the area had problems. I am a single mom of 4. I'm getting my mfa. I have spent more time dealing with tech support and this issue of not being able to upload files than I have accomplishing what it takes to put food on my table.
wwhat am I supposed to do??
bloody frustrated.
TO type this from my iPhone. I have had to stop and start no less then 5 times because it's not working right.
I Guess I am going to have to start looking at how I am going to come up with money for a new computer (non mac). I have had itIt is a bummer to have this problem. Can you describe the specific steps you are using to upload files? It is difficult to help problem solve without more information. Are you using Dropbox? Email?
-
Get filesize and filename of uploaded file
Hello -
I am somewhat of a newbie and am need of some assistance. I am using ADT to upload a file and save to a database along with its filename and filesize. The file uploads fine, but the filename and size are not being recorded in the database. Other fields that are part of the upload form save to the dB fine.
Here's the basic code:
// Add columns
$ins_UserBackgroundPapers->addColumn("FileContainer", "FILE_TYPE", "FILES", "FileContainer");
$ins_UserBackgroundPapers->addColumn("FileName", "STRING_TYPE", "POST", "FileName");
$ins_UserBackgroundPapers->addColumn("FileSize", "STRING_TYPE", "POST", "FileSize");
<form name="form1" method="POST" id="form1" action="<?php echo $editFormAction; ?>" enctype="multipart/form-data">
<input type="file" name="FileContainer" id="FileContainer" size="32" />
<input name="FileName" id="FileName" type="hidden" value="<?php echo $HTTP_POST_FILES['FileContainer']['name']?>" />
<input name="FileSize" id="FileSize" type="hidden" value="<?php $HTTP_POST_FILES['FileContainer']['size'];?>" />
<input class="submit" type="submit" name="KT_Insert1" id="KT_Insert1" value=";Upload"/>
</form>
I've also tried using $_FILES["FileContainer"]["name/size"] with no luck.
Any help would be much appreciated. I'm desperate!
Thanks.I think the main issue is that the file name does - unlike expected - not get stored in the FileContainer column, but I don´t have any idea why this happens without seeing the complete code of the page in question.
In regards to retrieving the file size:
Those hidden fields you´re trying to make use of:
<input name="FileName" id="FileName" type="hidden" value="<?php echo $HTTP_POST_FILES['FileContainer']['name']?>" />
<input name="FileSize" id="FileSize" type="hidden" value="<?php $HTTP_POST_FILES['FileContainer']['size'];?>" />
...can´t capture the additional info you want, because the very moment the form data gets submitted, the file itself has not neccesarily been uploaded yet, in particular when ADDT´s File Upload trigger has been set to AFTER -- and it´s important to consider that the $HTTP_POST_FILES[] values are assigned at the server side and not by the browser anyway.
However, additional information such as the size of an uploaded file doesn´t need to be stored anyway, because such information is easily retrievable by using the PHP function "filesize": http://de.php.net/filesize
Cheers,
Günter
P.S: $HTTP_POST_FILES[] is deprecated since PHP version 4.1.0 -- better use $_FILES instead: http://us3.php.net/manual/en/reserved.variables.files.php
Maybe you are looking for
-
I have 2 Hotmail accounts on my computer.Can only access 1 of them.
I have 2 Hotmail accounts on my computer. I can only seem to be able to open 1 of them.When I try to get into the other hotmail account message comes up that says Server not found.However I do have an Ipod and I can open both accounts and check my em
-
Is there any process I can use to allow me to type into my iPad my password. When I open up the device it sets itself up for me to type in my password. The cursor is blinking, the key pad comes up but it does not recognize that I am typing in the pas
-
IBook G3 can't boot from hard disk or cd
Hello, Just recently my laptop suddenly just would not start-up anymore. Here are it's symptoms and what I have tried: -When the computer starts up I get the folder with the flashing "?" mark sign. -I tried reseting the PMU and the PRAM and NVRAM (vi
-
Hi All, Need advice with Demantra Component. In the demo version 7.1.1 while I log as dm I am able to access Demand Management component supported for dm user. Next, I created a new user and a new group and then I log in the business modeler but I ca
-
Why do my emails keep coming even tho already read
WHy do emails that I have already ready keep arriving and how do I stop this