Service instance q-in-q for xconnect

Topology:
ce1---- g0/1 PE1 ---- PE2 g2/2---- Switch---- ce2 and other CE's
          1.1.1.1          2.2.2.2
Ive never done service instances, so considering the above topology, how can i use service instance to xconnect one of gig2/2 vlans on PE2 to CE1. after reading a couple of examples, this is what i came up with, id appreciate any input on service instance and a correction of my attempt below.
PE1:
     int gig0/1.20
          encapsulation dot1q 20
          xconnect 2.2.2.2 123 encapsulation mpls
PE2:
     int gig2/2
          switchport
          switchport mode trunk
          service instance 123
               encapsulation dot1q 20 second-dot1q any
               rewrite ingress tag pop 1 symmetric
               xconnect 1.1.1.1 123 encapsulation mpls
Thanks
Glen

yes, but could you please answer if creating service instances would deny other vlans from flowing through my trunk port. im not intending to remove the trunk port, there are other vlans that still need to flow throughout other parts of the network, not necessarily xconnect CE's.
so my question is: does creating service instances disable trunking of the interface? if answer is yes, how can i keep the other traffic coming out this port tagged, while tunnelling particular vlans.
thanks
Glen

Similar Messages

Application Server job failed for service instance Microsoft.Office.Server.Search.Administration.SearchDataAccessServiceInstance

Hi
in our shaepoint farm we have a application server,one wfe server and one reporting server
and we are using BI solutions and running performance point service
i keep getting below error in wfe server and reporting server as well also.
Log Name:      Application
Source:        Microsoft-SharePoint Products-SharePoint Server
Date:          01/09/35 02:23:34 م
Event ID:      6481
Task Category: Shared Services
Level:         Error
Keywords:
User:          XYZPORTAL\spfarm
Computer:      XYZWFE02.XYZportal.com
Description:
Application Server job failed for service instance Microsoft.Office.Server.Search.Administration.SearchDataAccessServiceInstance (b340454e-ab06-4981-80f7-81d2326a1b32).
Reason: An update conflict has occurred, and you must re-try this action. The object SearchDataAccessServiceInstance was updated by XYZPORTAL\spfarm, in the OWSTIMER (7296)
process, on machine XYZWFE02. View the tracing log for more information about the conflict.
Technical Support Details:
Microsoft.SharePoint.Administration.SPUpdatedConcurrencyException: An update conflict has occurred, and you must re-try this action. The object SearchDataAccessServiceInstance
was updated by XYZPORTAL\spfarm, in the OWSTIMER (7296) process, on machine XYZWFE02. View the tracing log for more information about the conflict.
   at Microsoft.SharePoint.Administration.SPConfigurationDatabase.StoreObject(SPPersistedObject obj, Boolean storeClassIfNecessary, Boolean ensure)
   at Microsoft.SharePoint.Administration.SPConfigurationDatabase.Microsoft.SharePoint.Administration.ISPPersistedStoreProvider.PutObject(SPPersistedObject persistedObject,
Boolean ensure)
   at Microsoft.SharePoint.Administration.SPPersistedObject.BaseUpdate()
   at Microsoft.Office.Server.Search.Administration.SearchDataAccessServiceInstance.Synchronize(Boolean calledFromSearchServiceInstance)
   at Microsoft.Office.Server.Administration.ApplicationServerJob.ProvisionLocalSharedServiceInstances(Boolean isAdministrationServiceJob)
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Microsoft-SharePoint Products-SharePoint Server" Guid="{C33B4F2A-64E9-4B39-BD72-F0C2F27A619A}" />
    <EventID>6481</EventID>
    <Version>14</Version>
    <Level>2</Level>
    <Task>3</Task>
    <Opcode>0</Opcode>
    <Keywords>0x4000000000000000</Keywords>
    <TimeCreated SystemTime="2014-06-28T11:23:34.565108900Z" />
    <EventRecordID>1419864</EventRecordID>
    <Correlation ActivityID="{CEACAABB-34A0-41F6-88B0-0834929B654C}" />
    <Execution ProcessID="14104" ThreadID="19380" />
    <Channel>Application</Channel>
    <Computer>XYZWFE02.XYZportal.com</Computer>
    <Security UserID="S-1-5-21-681022615-1803309023-368063384-1108" />
</System>
<EventData>
    <Data Name="string0">Microsoft.Office.Server.Search.Administration.SearchDataAccessServiceInstance</Data>
    <Data Name="string1">b340454e-ab06-4981-80f7-81d2326a1b32</Data>
    <Data Name="string2">An update conflict has occurred, and you must re-try this action. The object SearchDataAccessServiceInstance was
updated by XYZPORTAL\spfarm, in the OWSTIMER (7296) process, on machine XYZWFE02. View the tracing log for more information about the conflict.</Data>
    <Data Name="string3">Microsoft.SharePoint.Administration.SPUpdatedConcurrencyException: An update conflict has occurred, and you must
re-try this action. The object SearchDataAccessServiceInstance was updated by XYZPORTAL\spfarm, in the OWSTIMER (7296) process, on machine XYZWFE02. View the tracing log for more information about the conflict.
   at Microsoft.SharePoint.Administration.SPConfigurationDatabase.StoreObject(SPPersistedObject obj, Boolean storeClassIfNecessary, Boolean ensure)
   at Microsoft.SharePoint.Administration.SPConfigurationDatabase.Microsoft.SharePoint.Administration.ISPPersistedStoreProvider.PutObject(SPPersistedObject persistedObject,
Boolean ensure)
   at Microsoft.SharePoint.Administration.SPPersistedObject.BaseUpdate()
   at Microsoft.Office.Server.Search.Administration.SearchDataAccessServiceInstance.Synchronize(Boolean calledFromSearchServiceInstance)
   at Microsoft.Office.Server.Administration.ApplicationServerJob.ProvisionLocalSharedServiceInstances(Boolean isAdministrationServiceJob)</Data>
</EventData>
</Event>
adil

HI
I cleared the configuration cache and restarted the Reporting server ,
and performance point service,
and bi Pointers working fine and after some time it stopped to render data,
and received below error messge in wfe server
Log Name:      Application
Source:        Microsoft-SharePoint Products-PerformancePoint Service
Date:          04/09/35 01:44:58
م
Event ID:      1
Task Category: PerformancePoint Services
Level:         Error
Keywords:
User:          NT AUTHORITY\IUSR
Computer:      XYZWFE02.XYZportal.com
Description:
An exception occurred while the width of the Web. Diagnostic information that may help determine the cause of the following in this issue:
Microsoft.PerformancePoint.Scorecards.BpmException: There is a problem in the preparation of a Web Part for display.
Error code "Services PerformancePoint" is 20700.Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Microsoft-SharePoint Products-PerformancePoint Service" Guid="{A7CD5295-CBBA-4DCA-8B67-D5BE061B6FAE}" />
    <EventID>1</EventID>
    <Version>14</Version>
    <Level>2</Level>
    <Task>1</Task>
    <Opcode>0</Opcode>
    <Keywords>0x4000000000000000</Keywords>
    <TimeCreated SystemTime="2014-07-01T10:44:58.277694100Z" />
    <EventRecordID>1426175</EventRecordID>
    <Correlation ActivityID="{C4FDF79F-347D-48C5-8F2D-B732D353F20E}" />
    <Execution ProcessID="17088" ThreadID="18964" />
    <Channel>Application</Channel>
    <Computer>XYZWFE02.XYZportal.com</Computer>
    <Security UserID="S-1-5-17" />
</System>
</Event>
adil

How to check for outstanding service instance creation requests

Greetings,
In preparation to upgrade my OEM Cloud Control from 12.1.0.1 to 12.1.0.3 I am reading the OEM Cloud Control Upgrade Guide. Step 2b in Chapter 3 (Getting Started) says to check for outstanding database service instance creation requests as follows: In Cloud Control from the Enterprise menu, select Infrastructure Cloud. I do not see an Infrastructure Cloud option under the Enterprise dropdown. I don't understand why not. If anyone can shed some light on this I would appreciate it.
Thank you.
Bill Wagman

Step 2b applies to sites with DBaaS (database as a service) feature enabled. If you have not set up DBaaS, it is not necessary to check on database requests referred to in the step.
Doc on DBaaS:
http://docs.oracle.com/cd/E24628_01/doc.121/e28814/cloud_db_using.htm#CHDFDDBC
By the way, it is recommended that you check out the following notes on upgrade:
1568143.1 - EM 12c R3: Checklist for Upgrading Enterprise Manager Cloud Control from Version 12.1.0.x to 12.1.0.3
1569883.1 - EM 12c R3: Checklist for Upgrading Management Agents Version 12.1.0.x to 12.1.0.3

ME 3800 X - QinQ across service instance

I realize a test rig of ME-3800-X.
I use the MPLS and QinQ.
EoMPLS for pseudowire is Ok in test rig.
QinQ also.
In fact, everything is ok.
But, in documentation, it is not said that we can forward the frame QinQ across a Service Instance.
Header:vlan+eth+data                     >>ingress 3800 -A >> evc bridge-domain 100 >>>>>> Vlan 100 and rewite imposition and Xconnect to B>>
                                      egress 3800 -A >> Eompls+QinQ+Vlan+eth+data >>>>
                                                                                                                   |
                                                                                                                   |
                                                                                                    BACKBONE MPLS
                                                                                                                   |
                                                                                                                   |
>>>ingress 3800- B >>>> Vlan 100 (not rewite) + xconnect to A >>>> evc bridge-domain 100 >>>>egress 3800 - B > Header QinQ+ETH+DATA
It has QinQ frames within the bridge domaine not frame Vlan.
Question:
Is what I can do this even if the documentation does not indicate.
Thanks for your comment.
I am french, sorry for my bad english language.
Cdlt,

Hello Cdlt.
but what is the question? Is it something like "how come that even if my configuration does not match the guide my setup is working?"
Is that one?
Also, does it work when your config is matching the EVC guide instead (the one in green on your pdf)?
Quick notation is that even if the configuration is not matching the guide the final result is the same as you moved the pop operation of the outmost dot1q tag from the ingress PE (the one on top) to egress one by configuring 'platform rewrite imposition tag push 1 symmetric' on the SVIs.
So you either strip the qinq tag on ingress or on egress the frame looks like the same way when the last mpls label is popped.
Does this answer to your question or am I still missing the point?
Riccardo

Need help with Sharepoint foundation web application stuck on "STOPPING" error job-service-instance-GUID Number already exists

Hi All,
I cant get to stop SharePoint foundation web app service. Its stuck on status stopping
I have tried the following:
reset IIS
restarted the Timer Service
When I try to use powershell command to stop I get the following error:
Can anyone who went through this help PLEASE
Stop-SPServiceInstance : An object of the type
Microsoft.SharePoint.Administration.SPServiceInstanceJobDefinition named
"job-service-instance-1ff39eb2-12d2-457d-a749-265e350eb1b1" already exists
under the parent Microsoft.SharePoint.Administration.SPTimerService named
"SPTimerV4". Rename your object or delete the existing object.
At line:1 char:127
+ ... pplication"} | Stop-SPServiceInstance
+ ~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidData: (Microsoft.Share...ServiceInstance:
SPCmdletStopServiceInstance) [Stop-SPServiceInstance], SPDuplicateObjectEx
ception
+ FullyQualifiedErrorId : Microsoft.SharePoint.PowerShell.SPCmdletStopServ
iceInstance

Hi,
It seems that the issue is in the timer job definition for executing this operation.
My suggestion is to start the service again and delete the job definition from the error and again try to stop it.
This might be helpful:
http://sharepoint.stackexchange.com/questions/22368/is-there-a-powershell-cmdlet-to-delete-a-timer-job
I had a lot of issues in the past when try to stop this instance after the Web apps are provisioned.
As general rule now If I have multi-server Farm topology that has servers that should not serve Web App requests I turn off the service prior to provisioning any Web Apps in the Farm.
BR,
Ivan

ME3600 does not forward frames out one interface in service instance

Hi,
I have an issue with ME3600 running 15.3(1)S. I have a BDI used for CPE
management.
cisco ME-3600X-24FS-M
Cisco IOS Software, ME360x Software (ME360x-UNIVERSALK9-M), Version
15.3(1)S, RELEASE SOFTWARE (fc1)
This is the BDI and VRF configuration:
interface Vlan1620
ip vrf forwarding 65000:1620
ip address 10.232.28.1 255.255.252.0
no ip redirects
ip vrf 65000:1620
rd 65000:1620
route-target export 65000:1620
route-target import 65000:1620
address-family ipv4 vrf 65000:1620
redistribute connected
The MPLS part is working fine, no issues there. There is also a DHCP
pool handing out IPs to the CPEs.
ip dhcp pool 65000:1620
vrf 65000:1620
network 10.232.28.0 255.255.252.0
domain-name xyz
default-router 10.232.28.1
option 66 ascii 10.232.28.1
dns-server 8.8.8.8
lease 0 0 30
This also works fine and I have verified that CPE has both IP and GW.
Then for the service instance configuration:
interface GigabitEthernet0/5
switchport trunk allowed vlan none
switchport mode trunk
service instance 1620 ethernet
encapsulation dot1q 1620
rewrite ingress tag pop 1 symmetric
bridge-domain 1620
interface GigabitEthernet0/11
switchport trunk allowed vlan none
switchport mode trunk
service instance 1620 ethernet
encapsulation dot1q 1620
rewrite ingress tag pop 1 symmetric
bridge-domain 1620
Traffic to CPEs behind Gi0/11 works:
sh ip arp vrf 65000:1620 vlan 1620 | i 29.26
Internet 10.232.29.26 0 0022.07f3.3450 ARPA Vlan1620
show mac-address-table address 0022.07f3.3450
Mac Address Table
Vlan Mac Address Type Ports
1620 0022.07f3.3450 DYNAMIC Gi0/11+Efp1620
Total Mac Addresses for this criterion: 1
Pinging 10.232.29.26 with 32 bytes of data:
Reply from 10.232.29.26: bytes=32 time=33ms TTL=61
Reply from 10.232.29.26: bytes=32 time=32ms TTL=61
Reply from 10.232.29.26: bytes=32 time=34ms TTL=61
Reply from 10.232.29.26: bytes=32 time=32ms TTL=61
Traffic to CPEs behind Gi0/5 does not work.
sh ip arp vrf 65000:1620 vlan 1620 | i 28.190
Internet 10.232.28.190 2 0022.07f2.76a6 ARPA Vlan1620
show mac-address-table address 0022.07f2.76a6
Mac Address Table
Vlan Mac Address Type Ports
1620 0022.07f2.76a6 DYNAMIC Gi0/5+Efp1620
Total Mac Addresses for this criterion: 1
Pinging 10.232.28.190 with 32 bytes of data:
Request timed out.
Request timed out.
Request timed out.
Request timed out.
This is also confirmed by looking at counters. There seems to be no
egress traffic on Gi0/5.
Service Instance 1620, Interface GigabitEthernet0/11
Pkts In Bytes In Pkts Out Bytes Out
31717 2955368 4569808 1709207624
Service Instance 1620, Interface GigabitEthernet0/5
Pkts In Bytes In Pkts Out Bytes Out
4850878 367975447 0 0
It does work to ping locally from the 3600 though:
ping vrf 65000:1620 10.232.28.190
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 10.232.28.190, timeout is 2 seconds:
Success rate is 100 percent (5/5), round-trip min/avg/max = 1/2/4 ms
I'm not sure how to troubleshoot it further. I've also tried setting up
ERSPAN sessions for RX traffic on Gi0/5 but I don't get anything in
unless I ping 28.1 which is the IP of the interface on the 3600.
Any clues?
Daniel Dib
CCIE #37149
Please rate helpful posts.

It could not have been caused by a virus, since there are no viruses for Mac OS X. I would guess it was a typo when you first setup the account, and when you set it up again, a user may have gone to Preferences and selected the Outgoing mail server drop down menu and inadvertently selected the typo'd server entry.
Mulder

TF255186: The following SQL Server Reporting Services Instance could not be found

Hi,
I'm trying to install TFS 2013 on a remote SQL RS instance.
Using the TFS 2103 U4 installation
SQL 2012 RS, name instance, Server: SQLProdA, Instance Name COMRS
When I enabled tracing using debugView I see the following output:
[4160] [Error @11:07:10.978] Exception Message: TF255186: The following SQL Server Reporting Services Instance could not be found: COMRS. The server name is: SQLProdA. (type TfsAdminException)
Any ideas what the issue is?
Thanks,
reuvy

Hi Charles,
Thanks for the help. I already saw those links, and am already trying with the format. As I wrote above:
Server: SQLProdA, Instance Name COMRS
So I wrote in the box "SQLProdA\COMRS" (without quotes of course) and I still keep getting that error.
I don't know if it matters, but although this is indeed a named instance, nonetheless, the path to the report server uses the default url (ie.
http://servername/reports) as opposed to the name instance version (ie.
http://servername_instance/reports) as mentioned by your link and this post:
https://msdn.microsoft.com/en-us/library/bb552341.aspx
But, I checked with Fiddler on the server and didn't see it trying to even access the link so I don't think it is related. I saw with Process Monitor that it is indeed trying to access via the network resources on SQLProdA, so I know it's trying.
I have noticed something in the past, and wondered if this could be the issue, that for example if I have Management Studio 2014 installed, I cannot connect to a Reporting Services instance which is 2012. Only when Management Studio 2012 is installed
and being used can I connect. I wondered if this possibly could be related, that maybe the API or something else which the installer is using is missing some component to connect to the RS instance.
Just in case, I already installed both the SQL 2012 and 2014 Client Tools Connectivity (although I first installed 2014, and then 2012).
Do you think this could be the issue? If not, do you possibly have any other leads?
Thanks,
Reuvy

PowerPivot - SP2013 - Cannot create the service instance because the parent Service does not exist

Unable to setup PowerPivot using PowerPivot configuration tool.
I have One server which has SQL 2012 SP1 and SP2013.
The farm is configured with all service applications.
SQL has default instance with DB Engine and SSAS Tabular. Reporting Services has been configured using SharePoint mode and has a service application.
The Power Pivot instance is set up with DB Engine and the SSAS.
I keep getting this error. Ive tried so many times uninstalling, making sure features removed, rebuilding the farm (thank god for autospinstaller..)
11/07/13 12:06:17:6858 Verbose: CreateSystemServiceInstance.NeedsExecute
11/07/13 12:06:17:6858 Verbose: Running function IsFarmConfigured to check whether SharePoint is configured regardless of availability
11/07/13 12:06:17:6858 Verbose: Farm is configured
11/07/13 12:06:17:6858 Verbose: Entering function GetService(Guid)
11/07/13 12:06:17:6868 Verbose: Service is not installed.
11/07/13 12:06:17:6868 Verbose: Service instance not found in local server.
11/07/13 12:06:17:6868 Verbose: CreateSystemServiceInstance.NeedsExecute(True)
11/07/13 12:06:17:6868 Verbose: CreateSystemServiceInstance.CanExecute
11/07/13 12:06:17:6868 Verbose: CreateSystemServiceInstance.CanExecute(True)
11/07/13 12:07:41:5662 Verbose: CreateSystemServiceInstance.Execute
11/07/13 12:07:41:5682 Verbose: Entering function GetService(Guid)
11/07/13 12:07:41:5702 Verbose: Service is not installed.
11/07/13 12:07:41:5702 Verbose: CreateSystemServiceInstance.Execute(Skipped)
11/07/13 12:07:41:5702 High: Cannot create the service instance because the parent Service does not exist.
11/07/13 12:07:41:5702 High: Prerequisites check for execution failed. Farm is not in a valid state.

Did you install the PowerPivot add-in for SharePoint? There are 2 parts to this - the SQL Server Power Pivot for SharePoint which is the Analysis Services instance running in Tabular Mode and the PowerPivot Add-in. The last line in your error message seems
to tell you that you have a missing component in the farm, possibly the PowerPivot Add-in
Edwin Sarmiento SQL Server MVP | Microsoft Certified Master
Blog |
Twitter | LinkedIn
SQL Server High Availability and Disaster Recover Deep Dive Course

ME3600-ME3800: service-instance & bridge-domain syntax

Hello,
what is the best practice for the configuration of L3VPN on Cisco ME3XXX ?
Old Syntax:
interface GigabitEthernet0/1
switchport trunk allowed vlan none
switchport mode trunk
service instance 2 ethernet
encapsulation dot1q 3
rewrite ingress tag pop 1 symmetric
bridge-domain 4
interface vlan 4
vrf forwarding L3VPN-1
ip address 2.2.2.1 255.255.255.0
New Syntax:
interface GigabitEthernet0/1
switchport trunk allowed vlan none
switchport mode trunk
service instance 2 ethernet
encapsulation dot1q 3
rewrite ingress tag pop 1 symmetric
bridge-domain 4
member GigabitEthernet0/1 service-instance 2
interface vlan 4
vrf forwarding L3VPN-1
ip address 2.2.2.1 255.255.255.0
The new syntax is very much similar to the new syntax for L2VPN, see:
http://www.cisco.com/en/US/docs/switches/metro/me3600x_3800x/software/design/guide/ME3600x_Design_Guide.pdf
I'm soon sending in the field some more ME3600, so I'd like to start right.
Best Regards
Andrea

Hello.
You might have confused service instance configuration and usual switchport mode trunk.
Please refer figure 11-10 in the document http://www.cisco.com/c/en/us/td/docs/switches/metro/me3600x_3800x/software/release/12-2_52_ey/configuration/guide/3800x3600xscg/swevc.html
>But there is a typo - per description it should be "enc doat1q 20" under service instance 9on the picture).
Also under Figure 11-2 we have following example:
QinQ is also supported when sending packets between an EFP and a switchport trunk, because the switchport trunk is implicitly defined as rewrite ingress tag pop 1 symmetric. The same external behavior as Method 1 can be achieved with this configuration:
Switch (config)# interface gigabitethernet0/1
Switch (config-if)# service instance 1 Ethernet
Switch (config-if-srv)# encapsulation dot1q 1-100
Switch (config-if-srv)# bridge-domain 30
Switch (config)# interface gigabitethernet0/2
Switch (config-if)# switchport mode trunk
Again, service instance 1 on Gigabit Ethernet port 0/1 is configured with the VLAN encapsulations used by the customer: C-VLANs 1-100. These are forwarded on bridge-domain 30. The service provider facing port is configured as a trunk port. The trunk port implicitly pushes a tag matching the bridge-domain that the packet is forwarded on (in this case S-VLAN 30).

SP 2010 - Error when creating a new Search Service Instance

Hi experts,
I'm getting the below error logged in my SharePoint 2010 SP2 Server. Any ideas to resolve it please? Thanks in advance.
Application Server Administration job failed for service instance Microsoft.Office.Server.Search.Administration.SearchServiceInstance (9b011033-0dc6-4d77-8f22-c16aa010532f). Reason: Exception from HRESULT: 0x80040D23
Technical Support Details: System.Runtime.InteropServices.COMException (0x80040D23): Exception from HRESULT: 0x80040D23
at Microsoft.Office.Server.Search.Administration.MSSITLB.IGatherManagerAdmin3.get_ConfigurationVersion()
at Microsoft.Office.Server.Search.Administration.Gatherer.ProvisionGlobalProperties()
at Microsoft.Office.Server.Search.Administration.SearchServiceInstance.Synchronize()
at Microsoft.Office.Server.Administration.ApplicationServerJob.ProvisionLocalSharedServiceInstances(Boolean isAdministrationServiceJob)
Hamza Grandi

did you see any error in Event/application logs? could you please tell us at what point you getting the error?
mostly this is happen when An index corrupted, may need to rebuild / reset the index.
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

Service Instance remains active when calling Web Service using WCF-BasicHttp binding

I am trying to call a web service using ESB ToolKit using a dynamic send port. The message went through all the pipeline components successfully. However, after the message is picked up by the WCF adapter, the service instance remains in "Active"
status, and then eventually it dehydrates itself. There's no error in the event log at all. Have anyone seen this problem before? If so, what is the solution?
I tried using a static send port with exactly the same configuration and the message reaches the web service successfully and got the response back.
Please note the web service is RPC-Style web service, not sure if it makes a difference.
Here is the configuration for the static send port
<Address>http://myserver:8088/mockLoadDataBinding</Address><TransportType Name="WCF-BasicHttp" Capabilities="899" ConfigurationClsid="467c1a52-373f-4f09-9008-27af6b985f14" />
<TransportTypeData>
<CustomProps>
<InboundNodeEncoding vt="8">String</InboundNodeEncoding>
<MessageEncoding vt="8">Text</MessageEncoding>
<ServiceCertificate vt="8" />
<InboundBodyPathExpression vt="8">//*[local-name()='return']/node() | //*[local-name()='SecurityException']</InboundBodyPathExpression>
<OutboundBodyLocation vt="8">UseTemplate</OutboundBodyLocation>
<StaticAction vt="8" />
<InboundBodyLocation vt="8">UseBodyPath</InboundBodyLocation>
<ProxyAddress vt="8" />
<MaxReceivedMessageSize vt="3">65536</MaxReceivedMessageSize>
<ClientCertificate vt="8" />
<AlgorithmSuite vt="8">Basic256</AlgorithmSuite>
<ProxyUserName vt="8" />
<OutboundXmlTemplate vt="8"><web:loadData soapenv:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/" xmlns:web="http://www.company.com/webservices" xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"><input xsi:type="xsd:string"><bts-msg-body xmlns="http://www.microsoft.com/schemas/bts2007" encoding="string"/></input></web:loadData></OutboundXmlTemplate>
<TextEncoding vt="8">utf-8</TextEncoding>
<PropagateFaultMessage vt="11">-1</PropagateFaultMessage>
<SecurityMode vt="8">None</SecurityMode>
<ProxyToUse vt="8">Default</ProxyToUse>
<TransportClientCredentialType vt="8">None</TransportClientCredentialType>
<OpenTimeout vt="8">00:01:00</OpenTimeout>
<UseAcsAuthentication vt="11">0</UseAcsAuthentication>
<MessageClientCredentialType vt="8">UserName</MessageClientCredentialType>
<UseSSO vt="11">0</UseSSO>
<CloseTimeout vt="8">00:01:00</CloseTimeout>
<SendTimeout vt="8">00:01:00</SendTimeout>
</CustomProps>
</TransportTypeData>
here is the configuration for the dynamic send port (using BRE Resolver)
Set Endpoint Outbound TransportType to WCF-BasicHttp
Set Endpoint Outbound TransportLocation to http://myserver:8088/mockLoadDataBinding
Set Endpoint Message Exchange Pattern to Solicit-Response
Set EndPoint WCF Action to <empty string>
Set Endpoint Config to InboundNodeEncoding=String&MessageEncoding=Text&InboundBodyPathExpression=//*[local-name()='return']/node() | //*[local-name()='SecurityException']&OutboundBodyLocation=UseTemplate&StaticAction=&InboundBodyLocation=UseBodyPath&MaxReceivedMessageSize=65536&AlgorithmSuite=Basic256&OutboundXmlTemplate=<web:loadData
soapenv:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/" xmlns:web="http://www.company.com/webservices" xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"><input xsi:type="xsd:string"><bts-msg-body xmlns="http://www.microsoft.com/schemas/bts2007"
encoding="string"/></input></web:loadData>&TextEncoding=utf-8&PropagateFaultMessage vt="11">-1&SecurityMode=None&ProxyToUse=Default&TransportClientCredentialType=None&OpenTimeout=00:01:00&UseAcsAuthentication=False&MessageClientCredentialType=UserName&UseSSO=False&CloseTimeout=00:01:00&SendTimeout=00:01:00
Set Endpoint Target Namespace to
http://www.company.com/webservices

Thanks Birdsven,
I updated the Resolver policy to as follows, and still I am getting the same result.
<then>
<function>
<vocabularylink uri="95dced57-5e9b-4dbe-9cd8-4b166853dd8a" element="4ad331d0-820c-41cb-a98e-7e1f5a9d5360" />
<classmember member="set_TransportType" sideeffects="true">
<classref ref="Resolution" />
<argument>
<constant>
<string>WCF-BasicHttp</string>
</constant>
</argument>
</classmember>
</function>
<function>
<vocabularylink uri="95dced57-5e9b-4dbe-9cd8-4b166853dd8a" element="20652bdd-c1f2-4b75-9e6b-7e20af98e66d" />
<classmember member="set_MessageExchangePattern" sideeffects="true">
<classref ref="Resolution" />
<argument>
<constant>
<string>Solicit-Response</string>
</constant>
</argument>
</classmember>
</function>
<function>
<vocabularylink uri="95dced57-5e9b-4dbe-9cd8-4b166853dd8a" element="9357b8ea-3663-4625-9681-a2fc2f423911" />
<classmember member="set_TransportLocation" sideeffects="true">
<classref ref="Resolution" />
<argument>
<constant>
<string>http://myservice.com:8089/loadDataService</string>
</constant>
</argument>
</classmember>
</function>
<function>
<vocabularylink uri="95dced57-5e9b-4dbe-9cd8-4b166853dd8a" element="9c97e7a0-d119-4b0d-8e39-2b281ae6ef8d" />
<classmember member="set_Action" sideeffects="true">
<classref ref="Resolution" />
<argument>
<constant>
<string>{loadData}</string>
</constant>
</argument>
</classmember>
</function>
<function>
<vocabularylink uri="95dced57-5e9b-4dbe-9cd8-4b166853dd8a" element="2829f1b7-09c0-4396-b82e-23fd65d8439c" />
<classmember member="set_EndpointConfig" sideeffects="true">
<classref ref="Resolution" />
<argument>
<constant>
<string>InboundNodeEncoding=String&MessageEncoding=Text&ServiceCertificate=&InboundBodyPathExpression=//*[local-name()='return']/node() | //*[local-name()='SecurityException']&OutboundBodyLocation=UseTemplate&StaticAction=&InboundBodyLocation=UseBodyPath&ProxyAddress=&MaxReceivedMessageSize=65536&ClientCertificate=&AlgorithmSuite=Basic256&ProxyUserName=&OutboundXmlTemplate=<web:loadData soapenv:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/" xmlns:web="http://www.mycompany.com/webservices" xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"><input xsi:type="xsd:string"><bts-msg-body xmlns="http://www.microsoft.com/schemas/bts2007" encoding="string"/></input></web:loadData>&TextEncoding=utf-8&PropagateFaultMessage=True&SecurityMode=None&ProxyToUse=Default&TransportClientCredentialType=None&OpenTimeout=00:01:00&UseAcsAuthentication=False&MessageClientCredentialType=UserName&UseSSO=False&CloseTimeout=00:01:00&SendTimeout=00:01:00</string>
</constant>
</argument>
</classmember>
</function>
<function>
<vocabularylink uri="95dced57-5e9b-4dbe-9cd8-4b166853dd8a" element="54624479-caea-4228-86b9-fbe188a8c64d" />
<classmember member="set_TargetNamespace" sideeffects="true">
<classref ref="Resolution" />
<argument>
<constant>
<string>http://www.mycompany.com/webservices</string>
</constant>
</argument>
</classmember>
</function>
</then>

Service instance command is not as documented

Hi,
I use Cisco 7609 with IOS 15.0(1)S1 and with ES+ module.
I try to configure a service instance, but the only possible commands I get are:
Router-1(config-if)#ser insta 22eth
Router-1(config-if-srv)#?
Ethernet EFP configuration commands:
default   Set a command to its defaults
ethernet Configure ether lmi parameters
exit      Exit from ETHER EFP configuration mode
no        Negate a command or set its defaults
I need the "encapsulation ... " command.
Could someone explain what is the problem? ES+ module supports EVC-style configuration and Cisco official documentation claims that the above mentioned command IS supported.
Thanks,
Yoav.

Hello Yoav
Yes indeed it should be supported .. Is it possible to try different IOS if it is a lab router
NPE-1(config-if)#ser in 10 ethernet
NPE-1(config-if-srv)#?
Ethernet EFP configuration commands:
default        Set a command to its defaults
description    Service instance specific description
encapsulation Configure ethernet frame match criteria
errdisable      Configure error disable
ethernet        ethernet
exit            Exit from ETHER EFP configuration mode
group          Join a service group
ip              Interface Internet Protocol config commands
l2protocol      Configure l2 control protocol processing
mac            Commands for MAC Address-based features
no              Negate a command or set its defaults
service-policy Attach a policy-map to an EFP
shutdown        Take the Service Instance out of Service
snmp            Modify SNMP service instance parameters
weight          Assign a weight to an EFP
NPE-1(config-if-srv)#
Regards
Sherif Ismail

Biztalk Service instance termination programatically

Hi all,
I am trying to terminate the service instances of a particular Application. I am using WMI for it.
I am using Select * from MSBTS_ServiceInstance where AssemblyName Like 'ApplicationName%' to get the complete list of the serviceinstances for that application. Then I use the Terminate() function to terminate the instances.
Unfortunately this query does miss out some of the serviceinstances(in case if the instances are of the called orchestrations and messaging) so the termination of the serviceinstance does not get completed. I tried using Microsoft.Biztalk.Operations
name space to achieve this task but I was unsuccessful.
In a nutshell I want to achieve is that by providing the application name I can get a complete list of the service instances.
Is there a way to do it?
Am i missing something in the WMI query?
Please provide your valuable inputs.
Regards,
Mandar Dharmadhikari.

Another duplicate one..from the same user !!!
Duplicate of another forum post-
http://social.msdn.microsoft.com/Forums/en-US/2ddee244-f8be-4edc-9410-59062ecd8716/terminating-sericeinstances-programmatically?forum=biztalkgeneral
Anyway here is reply..
Did you look into this WMI script
MSDN: WMI - Removing Suspended Service Instances
You can use this script as a reference for your requirement and may be if you need, you can update to your need.
Also have a look into terminator tool. The above code works but officially it has been replace by
BizTalk Terminator tool. As per official statement:
“A tool which allows for common BizTalk problems to be addressed by scripts provided by the BizTalk team. Replaces terminate.vbs
with more functionality including the ability to suspend, resume and terminate by date range. Powershell script functionality provided for performance tuning. Integration with mbvcleanupscripts.xml from the messagebox viewer utility”
Reference:
http://www.microsoft.com/en-us/download/details.aspx?id=2846
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

Central Services instance Missing

Hi,
We are installing XI 3.0
We have applied till the Kernel Patch successfully. After that...
The SAP_<SID>_01 service is not starting. As a result of which we could not find the Central services instance in the MMC.
What could be the reason for it?
Ayone who has faced the same do let me know as to how to solve it.
thanks
Siva

Hi Siva,
First of all this situation is not only because of kernel upgrade.
I have not even applied kerenel patches. I have resterted the server machine, when my VA and IR and RWB got hang. After logging into SAPMMC i see only SAP<sid>_00 service is running . After that when i restarted my machine again and installed my sap frontend freshly, then the same service is running perfectly.
I can understand you must be going through different scanerio, but i just thought of sharing my exp. to you.
May be of some help.
regards,
kailashj

JPS-03026: PDPService and PolicyStore Service instance not found in default

Dear all
I just installed OIAM and I am facing this error when I try to start AdminServer:
JPS-03026: PDPService and PolicyStore Service instance not found in default context
There is an entry in the manual that says that I need to execute this:
IDM_HOME/common/bin/wlst.sh IDM_HOME/oes/modifygrants.py
I did it, I see in the weblogic.policy file the entries mentioned in the manual:
grant codeBase "file:${idm.opss.oracle.home}/modules/oracle.jps_
${jrf.version}/*" {permission java.security.AllPermission;
grant codeBase "file:${idm.opss.oracle.home}/oes/*" {permission java.security.AllPermission;
grant codeBase "file:${oes.client.home}/-" {permission java.security.AllPermission;
Still I have the same issue.
Any ideas?
Thanks

A: JPS-03026: PDPService and PolicyStore Service instance not found in default

hey Arturo,
I just did this into my server:
1)These steps are to prepared Identity and Policy Stores according to EDG 12035-07. So, webLogic Administration Server will not start after configuring OAM/OIM cluster.
And then you will reach: error message SEVERE: Ldap bootstrap credential retrieval failed. Reason:java.security.AccessControlException: access denied
2)yes, you must modify the security policy for WebLogic using the modifygrants.py script supplied in IAM Suite installation. I did it once and just after running the script my AdminServer process started correctly.
Please check and see if you are not missing something:
18.3.2.2 Editing the weblogic.policy file
To edit the weblogic.policy file, run the following command:
IDM_HOME/common/bin/wlst.sh IDM_HOME/oes/modifygrants.py
Important is:
The above command will only work if use the default policy name, weblogic.policy file. <===check this.
Only if you change the default name for the policy file, then you must open the file in a text editor and add the following lines:
grant codeBase "file:${idm.opss.oracle.home}/modules/oracle.jps_${jrf.version}/*" {
permission java.security.AllPermission;
grant codeBase "file:${idm.opss.oracle.home}/oes/*" {
permission java.security.AllPermission;
grant codeBase "file:${oes.client.home}/-" {
permission java.security.AllPermission;
So, just check if there is no misunderstanding. I just did into my server it's working fine now.
I hope this helps,
Thiago Leoncio.

Service instance q-in-q for xconnect

Similar Messages

Maybe you are looking for