Service Interfaces not Parsed in SPROXY

Hi Everyone,
I have a namespace http://sap.com/xi/Global2/testing which is imported with the standard SWCV from SAP Market Place. I recently made some changes to this namespace by importing few 'External Definitions' and then created 'Message Mappings', 'Interface Mappings' and 'Service Interfaces'. All went well on the PI side but when I checked SPROXY to test services, 'Service Interfaces' aren't parsed from the ESR.
I then created another namespace and copied all external objects to that namespace and deleted them from the original namespace of the SWCV whose vendor is sap.com but yet no success in seeing the 'Service Interfaces' of this original namespace in SPROXY.
I have tried SLDCHECK and the 'Test Connection' in the SPROXY which are working perfectly and other namespaces are parsed too but only this specific namespace has got problematic.
Everything is activated in the IR and ID and I have already applied Interface Object not showing in SPROXY
What should I do
Your help and time is much appreciated.
Regards,
Adil Khalil

Hi Adil
Check
Software component missing in SPROXY | SCN.
See Henrique's reply
You can't create custom proxies for standard XI Content (SWCVs whose vendor is "sap.com").
If you wish to use these interfaces, either there's a standard add-on for SRM or it's already included in standard SRM.
If you still wanna create proxies for these interfaces, try to create a custom SWCV and include this standard one as a dependency (hence it will appear as a "Basis" component of your SWCV). Maybe this way it will appear in SPROXY, but I'm not 100% sure.

Similar Messages

  • Service interface not listed in business system in ID.

    Hi Experts,
    In my QA system service interfaces are not listed in business system in ID, i have added product and SWCV in SLD and i am still unable to see the service interfaces of SWCV that i have added. i have done SLD and CPA cache refresh, restarted the QA system but still unable to resolve the issue.
    Please suggest how to resolve this issue.

    Hi Venu,
    i have done SLD and CPA cache refresh, restarted the QA system but still unable to resolve the issue.
    Try if "Compare from SLD" works? This can be accessed by going to ID -> double-click business system -> communication component -> adapter specific identifiers
    Regards,
    Mark

  • Service Interfaces not showing in the IP when imported in ID in PI7.1

    HI Experts,
         I have developed an Integration process(IP) in ESR using some Service interfaces and Operation mapping for implementing BPM.
    I am trying to import the IP into my Integration Directory. But the imported Integration process(which is now as good as a Business Service) does not show the Interfaces i have used in the BPM in the ESR.
       Without the interfaces being attached to the IP, i cannot create RD and ID's.
    This is the first time BPM is being configured in this server.
    Please guide me if there are any settings specific to ccBPM to be done in ECC.
    Please help me resolve this issue... i am in a crictical condition to meet the deadline..
    Thanx in advance,
    Nandan

    Hi Neetesh,
             Thanx for your reply. If there are any initial settings to be done in PI, please list them so that i can check if they exist in our system.
    Also,when i check(f7) my IP , its showing a message that " Container element my_interface in step Send1 is initialized but is not used ". Is this a concern ?
    I have copy pasted my interface names in the RD and InterfaceDtrmn in my ID and completed the ID part of configuration.When i test the BPM by triggering my Purchase Orders from my sender service,it is showing the following error in moni:
    "<SAP:Category>XIAdapter</SAP:Category>
      <SAP:Code area="BPE_ADAPTER">UNKNOWN_MESSAGE</SAP:Code>
      <SAP:P1 />
      <SAP:P2 />
      <SAP:P3 />
      <SAP:P4 />
      <SAP:AdditionalText />
      <SAP:Stack>No object type found for the message. Check that the corresponding process is activated</SAP:Stack> " in error section and in TRace its showing this error:
    <Trace level="1" type="B" name="CL_XMS_PLSRV_CALL_BPE-ENTER_PLSRV">
      <Trace level="1" type="T">could not create BPE proxy for message, no XML object definition found for message 70126C4C0C4D0B11E1000000AC113034</Trace>
      </Trace>
      </Trace>
      <Trace level="1" type="System_Error">Error exception return from pipeline processing!</Trace>
    Please suggest how these can be resolved????

  • PAPI Service Interfaces not exposed as Web Services

    Hi,
      In guide Javadoc_PAPI_SAPME_150 there are some public interfaces that are not present as Web Services in SAP NetWeaver Application Server -> Single Service Administration: Service Definitions.
      The list of missing interfaces is:
    ArchiveServiceInterface
    BrowseServiceInterface
    BrowseSfcServiceInterface
    DateGlobalizationServiceInterface
    DBSequenceServiceInterface
    DomainServiceInterface
    DynamicInvocationServiceInterface
    HookExecutionServiceInterface
    LocalizedServiceInterface
    NumberGlobalizationServiceInterface
    OverrideDefinitionServiceInterface
    PortletConfigurationServiceInterface
    PredefinedFieldGroupConfigurationServiceInterface
    PrintingFormatServiceInterface
    PrintingTransportServiceInterface
    ResourceBundleGlobalizationServiceInterface
    RevisionableDomainServiceInterface
    RunAsServiceInterface
    SchedulingStandardsConfigurationServiceInterface
    SpcChartServiceInterface
    TextGlobalizationServiceInterface
      I don't understand if this is by design or if there are some error in the customer NetWeaver implementation.
      Thank you for your help,
        Filippo.

    Hello Konstantin,
      thank you for your response.
      Just another question: you say "It's indicated that listed services are not published" but I don't understand where it's indicated.
      For example in documentation Javadoc_PAPI_SAPME_150, package com.sap.me.common, ObjectResolverServiceInterface and DynamicInvocationServiceInterface are documented in the same way and I don't see any indication that says if the interface is published as WS or not.
      Best regards,
        Filippo.

  • ViewNotify service is not parsing XML from View Drop folder

    Hi,
    The view drop folder has now 2200 odd XML files which were not parsed from sometime now. We took a backup of this folder and started processing files one by one.
    We had to restart the Service after sometime , the processing time is  not uniform it ranges from 10 sec to 600 sec for one file. When parsing in bulk , sometime parsing 5 in batch is successful whereas at times it does not parse in batches.
    Any suggestion on the available utility to automate the process where one file is parsed and then service is restarted.
    Regards,
    Siddharth

    Hi Siddharth,
    This post is specific for Project Server questions and answer. Please re post your query in corresponding forum.
    Thanks and let me know in case have any doubts or I am wrong in my understanding.
    Sachin Vashishth MCTS

  • Service Interfaces in PI 7.0?

    Hi Experts,
    PI 7.0 has been installed
    I just checked the SPROXY transaction in ECC, It shows the service interfaces not message interfaces...
    I was getting confused..cos i think service interfaces are only in PI 7.1 and its very different from 7.0
    can i have ur thoughts on this?

    hi,
    >>>So will this service interface change anything?..I guess not cos its just a message interface with multiple operations..pls correct me ?
    not exactly
    there is one huge change - no more standard proxy methods
    check out my blog
    /people/michal.krawczyk2/blog/2009/06/20/pixi-abap-proxies-say-goodbye-to-executeasynchronous-method
    >>>Also , If down the line they ask for 7.1?...is it a seprate entity all together?.or
    the new methods will work with 7.1 with no problem
    Regards,
    Michal Krawczyk

  • SPROXY not recognizing new Service Interfaces

    Hi all,
    We are currently on SAP_BASIS 7.0 connecting to XI 3.0 on SP18.  I have created a new inbound asynchronous message interface within XI and want to create a server proxy on the SAP side to consume the message from XI.  When I execute the SPROXY transaction to import the XI message interface, it is not displayed under the service interface and not allowing me to generate this.  Existing proxies exist under other service interfaces created since the upgrade but it doesn't seem to recognize that I created a new message interface in XI.  Would this be a compatibility issue with SAP_BASIS 7.0/ECC6 to XI 3.0 SP18 or would do I need to refresh something?  Any help would be appreciated.
    Thanks,
    Nate
    Edited by: Nathan Jabs on Sep 17, 2008 6:43 PM
    Edited by: Nathan Jabs on Sep 17, 2008 6:44 PM

    1.Recreate the name space with other name else than sap.com
    2. check whether ur namespace is displayed in light Grey Color
    then there may be connection to SAP XI issue.
    yes if it is in Light gray colour, you will get a status message as "NO CONNECTION TO INTEGRATION BUILDER (ONLY GENERIC DATA VISIBLE)
    check whether the proxy objects are created under seperate package
    check this help link
    http://help.sap.com/saphelp_nw04/helpdata/en/2b/f49b21674e8c44940bb3beafd83d5c/content.htm

  • Tx SPROXY in Backend doesn't show the Service interfaces

    Hi all,
    I have a problem w/ tx SPROXY in my backend.
    When I start the transaction, the system seems to be connected to the ESR, but I do not get any list of service interfaces to generate my proxy.
    I have gone through all the checks available through button "Connection Test", all finish without errors (RFC dest is there, all tests pass). But there is no list of service interfaces where I can click and choose "generate proxy".
    Any ideas??
    Thanks and best regards
    Marcelo

    It seems your backed system is not connected with XI. Check tcode SLDAPICUST and varify if there is any entry which points to XI system. In case it is not present there then you need to maintain host, port (50xxx), user & password.

  • IDOC-File : Service interface is not picking.

    I am doing IDOC to File scenario, in Integration Engine level it was picking the different "service interface"
    Ex: It was picking MAT_Sender_SI instead DBM_Sender_ SI.
    What could be the reason?
    Thanks in advance.

    Hi Kasi,
    I have a doubt in case of IDoc sender u need not create SI for outbound you can use the Idoc name directly.
    Hope i haven't understood it wrong.
    Hope this helps to configure:
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/e07dcaa0-a92b-2a10-3a96-b3d942bd1539?overridelayout=true
    thanks and regards,
    Praveen T

  • Not getting Service interface in receiver side

    Hi,
    I am working on a newly configured PI server.
    Here, I am working on a synchronous SOAP to RFC scenario from third party to ISU.
    From the Display WSDL option of ID I have created a wsdl file and testing the scenario by importing wsdl file into SOAP UI. When I am sending some request from SOAP UI , I am getting proper response message ; that's mean interface is working fine and properly hitting the RFC in ISU.
    I can see the message in SXMB_MONI of my PI server . But I am not getting the message in SXMB_MONI of ISU server . Even in SXMB_MONI of ISU I am not getting the inbound service interface also .
    What can be the possible reason . As I am working on a totally new server should I do any configuration in the server to get the SI in receiver side.
    Please help.
    Thanks in advance.

    Hi,
    Please check if Sync logging is enable in ISU. refer the below blog
    XI: I cannot see some of my messages in the SXMB_MONI
    regareds,
    Harish

  • Why not passing only one XML String parameter to Axis Web Service interface

    Hi,
    I am a newbie of axis and this is the first post in SUN site.
    I am writing a web service. I am considering this question after trying some examples in Axis:
    Why not defined parameters of our service interface (Service method.) as a XML String? -We can provide a XML Schema to Client, client fill all required information to a XML according to XML Schema. Seem that it is more straightforward than passing some complex objects.
    Your answer will be high appreciated!
    Thanks,
    -Hut

    Did you find a solution for that? Even im trying the same...

  • CreditWorthinessQuery_out service interface is not available

    Hello All,
    We are trying to connect SAP SD with SAP FSCM.
    Whenever we are trying to create Sales order, it giving error. Actually at this point system is trying to check customers credit worthiness.
    In sap system , sxmb_moni shows message into error as receiver is not found.
    This is the namespace and service interface.
    "http://sap.com/xi/PI/FIN/Operational/Global"  and  service interface "CreditWorthinessQuery_out"
    In PI7.1 ESR  FINBASIS_604 content is imported. I don't see above namspace and service interface  in given software component.
    Please let me know which software component need to be imported in ESR?.
    thanks,
    Sharada

    Thanks UDO,
    We need to integrate SAP SD with SAP FSCM.
    As per your suggestion, I have imported  following  xi contents in ESR,
    1.
         FINBASIS 603  as  SAP FSCM version is as given
         FINBASIS     603     0004     SAPK-60304INFINBASIS     FINBASIS 603     Component Supp. Pkg.
    2.SAP APPL 603 as logistics and Accounting patch level is as
       SAP_APPL     603     0004     SAPKH60304     Logistics and Accounting     APPL Support Package
    I have created a business system and have software product SAP ECC6.0 and SAP FSCM6.0.
    I cannot use interfaces from above software components as SAP ECC6.0 adds software component SAP APPL6.0  to that business system and  SAP FSCM6.0 adds software component to that business system.
    Latest version of software product of ECC available in SLD is  SAP ECC6.0
    Latest version of software product of SAP FSCM  available in SLD is  SAP FSCM6.0
    I want to add software components SAP APPL 603 and FINBASIS 603 to my business system. In this case which software product can be added to technical system?.
    Do I have to imprt latest CIM component in SLD?
    thanks,
    Sharada

  • The class or interface 'mx.remoting.Service' could not be loaded.

    Flash 8 was reinstalled on a new machine upgrade. Application
    that uses flash remoting is unable to be updated after this new
    install error when trying to publish application is :
    The class or interface 'mx.remoting.Service' could not be
    loaded.
    is this because I do not have the "Flash Remoting for Flash 8
    ActionScript 2.0" extension installed?
    and if so do I have to re purchase this or can it be
    reinstalled from the old hard drive of the replaced machine? would
    it be a *.mpx file?
    The application works but I can't publish any new
    modifications without getting this error. and this just started
    since my machine was upgraded.. so I hope this is the problem...
    thanks in advance....
    chuck

    The flash remoting components are on adobes website for
    download
    here

  • ABAP Web service - Virtual Interface Not Found

    Hi,
    I have created a ABAP web service based on RFC. I changed the authentication to "Basic username/password" from SOAMANAGER. Also tested the web service from WSNAVIGATOR (of different portal) using WSDL url. Web service successfully returned response.
    Now, I have a AJAX client where I have hardcoded the request (from wsnavigator) and trying to call this web service in SAP BW web template (from HTML/JavaScript). But its not giving error as "Virtual Interface Not Found". Also, i get 500 error. But the end point of the web service if looked up from browser gives response. The SICF service is active and upon tests gives valid response.
    Found couple of discussions regarding this:
    http://wiki.sdn.sap.com/wiki/display/VC/VirtualInterfacenotfounderror
    But i'm not finding the setting to activate virtual interface in SE80. ALso, we have created many such web services and they used to work fine prior to upgrade to Ehp1 SP05 (BI) but the newly created web service is not working.
    Any inputs?
    Abhijeet

    Hi can you please let me know how you resolved this issue?

  • Enhanced Data Type not visible in SPROXY

    Hello experts,
    I've enhanced my personal data type with some extra fields...
    I activated this and the change can be seen in the Message Type and the Service Interface.
    Next, I go to my ECC6.0 backend system and take transaction SPROXY. There I need to regenerate my proxy.
    After I did that, I expected to see my added fields in my input structure as an append structure, but that's not the case.
    What's wrong? Please advice.
    Thanks a lot!
    Dimitri

    Hi Dimitri,
       There should not any problem while generating proxyies again please chek two things in your case
    1.Wether the Activation is done prperly or not.
    2. Conncetions from ESR to PI are proper ot not ( rfc connection LCRSAPRFC between PI and R/3).
      Please chek the fillowing link which has the information about the issue in visibiility of content in ESR and the necessary configuration steps to be followed to enable the updated PI content in ESR as response to Question 2. in the responses.
    Thread:
    Re: Simple questions about proxy
    Configutaion guide for checking Proxy connections
    /people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies
    Thanks,
    Ram.

Maybe you are looking for