Service is not registering in Gateway
Hi Experts,
Ii am going to register the service under the Gateway service maintenance.
But its not allowing me to register the service showing in the gray color.
following are the system component details
GW_CORE 200
IW_BEP 200
IW_FND 250
Well I took my iPhone to the store today and the lady I spoke to was rude and in a rush and did not check my phone properly and claimed since there is not data, they cannot check for problem. The problem is with the microphone when talking to other people, what has having data got to do this? Since my experience with Apple store staff was a disaster, I will never again be taking my iPhone to Apple store. So the only option is to use online send in service but then that doesn't even work. So how can I get my iPhone fixed?
Similar Messages
-
11gR2 Install Error, Listener is not up or database service is not registered with it
Hi all,
I'm currently studying towards my OCA, I've passed 1z0-051 (SQL Fundementals I), and now I'm moving onto 1z0-052 (Admin 1).
Im really having trouble creating a database in Oracle 11g R2 Enterprise Edition. I install the software no problem. Then I create a database, and during the creation I have to createsa listener which uses TCP (default port:1521) and IPC. whilst creating the database I get the following error
'Listener is not up or database service is not registered with it. Start the Listener and register database service and run EM configuration Assistant again.'
Now, before you lynch me, I have searched this forum for answer to this for a day and a half. I've also tried google, i just can't find a answer that sorts out my problem. please assist me.
I'm running on Windows 7 Professional (32bit) (I have previously tried on the 64 bit version with teh same results).
Here's teh contents of my listener.ora file:
# listener.ora Network Configuration File: C:\app\Damien\product\11.2.0\dbhome_1\network\admin\listener.ora
# Generated by Oracle configuration tools.
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = CLRExtProc)
(ORACLE_HOME = C:\app\Damien\product\11.2.0\dbhome_1)
(PROGRAM = extproc)
(ENVS = "EXTPROC_DLLS=ONLY:C:\app\Damien\product\11.2.0\dbhome_1\bin\oraclr11.dll")
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = ipc))
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.10.4)(PORT = 1521))
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
ADR_BASE_LISTENER = C:\app\Damien
Here's the contents of my tsnames.ora:
# tnsnames.ora Network Configuration File: C:\app\Damien\product\11.2.0\dbhome_1\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
ORACLR_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
(CONNECT_DATA =
(SID = CLRExtProc)
(PRESENTATION = RO)
Here is the last fe lines of my emConfig.log:
Jan 18, 2014 9:38:22 AM oracle.sysman.emcp.util.GeneralUtil isLocalConnectionRequired
CONFIG: isLocalConnectionRequired: true
Jan 18, 2014 9:38:22 AM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: isLocalConnectionRequired: true. Connecting to database instance locally.
Jan 18, 2014 9:38:22 AM oracle.sysman.emcp.util.GeneralUtil initSQLEngineLoacly
CONFIG: SQLEngine connecting with SID: orcl, oracleHome: C:\app\Damien\product\11.2.0\dbhome_1, and user: SYSMAN
Jan 18, 2014 9:38:22 AM oracle.sysman.emcp.util.GeneralUtil initSQLEngineLoacly
CONFIG: SQLEngine created successfully and connected
Jan 18, 2014 9:38:23 AM oracle.sysman.emcp.ParamsManager checkListenerStatusForDBControl
CONFIG: ORA-12514: TNS:listener does not currently know of service requested in connect descriptor
oracle.sysman.assistants.util.sqlEngine.SQLFatalErrorException: ORA-12514: TNS:listener does not currently know of service requested in connect descriptor
at oracle.sysman.assistants.util.sqlEngine.SQLEngine.executeImpl(SQLEngine.java:1655)
at oracle.sysman.assistants.util.sqlEngine.SQLEngine.executeSql(SQLEngine.java:1903)
at oracle.sysman.emcp.ParamsManager.checkListenerStatusForDBControl(ParamsManager.java:3230)
at oracle.sysman.emcp.EMReposConfig.unlockMGMTAccount(EMReposConfig.java:1001)
at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:346)
at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:158)
at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:253)
at oracle.sysman.assistants.util.em.EMConfiguration.run(EMConfiguration.java:583)
at oracle.sysman.assistants.dbca.backend.PostDBCreationStep.executeImpl(PostDBCreationStep.java:968)
at oracle.sysman.assistants.util.step.BasicStep.execute(BasicStep.java:210)
at oracle.sysman.assistants.util.step.Step.execute(Step.java:140)
at oracle.sysman.assistants.util.step.StepContext$ModeRunner.run(StepContext.java:2667)
at java.lang.Thread.run(Thread.java:595)
Jan 18, 2014 9:38:23 AM oracle.sysman.emcp.EMConfig perform
SEVERE: Listener is not up or database service is not registered with it. Start the Listener and register database service and run EM Configuration Assistant again .
Refer to the log file at C:\app\Damien\cfgtoollogs\dbca\orcl\emConfig.log for more details.
Jan 18, 2014 9:38:23 AM oracle.sysman.emcp.EMConfig perform
CONFIG: Stack Trace:
oracle.sysman.emcp.exception.EMConfigException: Listener is not up or database service is not registered with it. Start the Listener and register database service and run EM Configuration Assistant again .
at oracle.sysman.emcp.ParamsManager.checkListenerStatusForDBControl(ParamsManager.java:3245)
at oracle.sysman.emcp.EMReposConfig.unlockMGMTAccount(EMReposConfig.java:1001)
at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:346)
at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:158)
at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:253)
at oracle.sysman.assistants.util.em.EMConfiguration.run(EMConfiguration.java:583)
at oracle.sysman.assistants.dbca.backend.PostDBCreationStep.executeImpl(PostDBCreationStep.java:968)
at oracle.sysman.assistants.util.step.BasicStep.execute(BasicStep.java:210)
at oracle.sysman.assistants.util.step.Step.execute(Step.java:140)
at oracle.sysman.assistants.util.step.StepContext$ModeRunner.run(StepContext.java:2667)
at java.lang.Thread.run(Thread.java:595)
Jan 18, 2014 9:38:23 AM oracle.sysman.emcp.EMConfig restoreOuiLoc
CONFIG: Restoring oracle.installer.oui_loc to C:\app\Damien\product\11.2.0\dbhome_1\oui
My Listner status output is here:
LSNRCTL for 32-bit Windows: Version 11.2.0.1.0 - Production on 18-JAN-2014 10:14:39
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=ipc)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows: Version 11.2.0.1.0 - Production
Start Date 18-JAN-2014 09:27:34
Uptime 0 days 0 hr. 47 min. 6 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File C:\app\Damien\product\11.2.0\dbhome_1\network\admin\listener.ora
Listener Log File c:\app\damien\diag\tnslsnr\LONDON\listener\alert\log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\ipcipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=192.168.10.4)(PORT=1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1521ipc)))
Services Summary...
Service "CLRExtProc" has 1 instance(s).
Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
I can login as sys into my database through sqlplus, so it seems the database is up and running, it just seems to be a listener problem maybe??
Many thanks for any assistance that you give. I'm learning so be gentle...
DamienSOLVED!
OK all solved now, thanks to the link to Ed Stevens website that Baris posted (mucho respect )
Seems that like Barus said I was not using Dynamic Registration, which means that I would need to manua
ly update the listerner.ora file. On top of that it seems that for some my tnsnames.ora wasn't resolving mt database name so the tnsping wasfailing.
What I did to solve the name resolution problem
1. Opened the
Network Configuration Assistant and saw that my listener didnt have my DB registered with it. So I added it. What this horrible GUI tool does is update the tnsnames and listener.ora files for you. So once that was done I went to the command prompt and did ;'tnsping <dn name> and hey presto it was getting a nice response.
Then I re-ran my DB Configuration Assistant and tried to reconfigure my database. However it aing failed and gave me the same message that I was originally getting about the DB Service not being registered etc..the lister status still said that same thing:
Services Summary...
Service "CLRExtProc" has 1 instance(s).
Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
the 'unknown' means that the DB didnt tell the listener that it was there but instead the listener is in manual mode and will just use the configuration in the listener.ora to know where the DB is.
So then I followed the steps on the ED Stevens website (follow the link). He has steps which show how to enable Dynanmic registration so that your DB regusters itself with the listener. In a nutshell, he states that he listener actually doesnt need the listerner.ora if using dynamic registration. I shutdown the DB, stopped the listener then I renamed the lsitener.ora to listerner.old, then started the lietener and checked the status and it said 'the listener supports no service' I then started the DB and, then resched teh listener status, it then read 'status: READY'... hooray!, the DB had dynamically registered itself with the listener. I then was able to successfully start up and run Enterprise Manager.
Thanks for all your help Baris, and Ed Steven website.
I know more now than when I started so I'm happy.
Thanks. -
The Fibre Channel Platform Registration Service could not register the platform with fabric
Hyper-V Cluster. HP StorageWorks 82E 8 Gb PCI-e Dual Port FC HBA.
Each 15 minutes, eventlog register a warning.
EventID: 2 Source:2
The Fibre Channel Platform Registration Service could not register the platform with fabric 10:00:00:05:1e:7f:74:7b.
I have teste the service. And it's started. Cluster storage validation report without failure.
Someone suggest any idea.
Thanks.Hi,
What’s the OS version of your cluster node?
The Microsoft Fibre Channel Platform Registration Service registers the platform with all available Fibre Channel fabrics and maintains the registrations. A fabric is a network topology where devices are connected to each other
through one or more high-efficiency data paths. This service is used in support of storage area networks.
This service is installed by default on Windows Server 2008, and the service startup type is Manual.
You may try hotfix in KB 978790, and check the result.
For more information please refer to following MS articles:
The File Share Witness resource is in a failed state even though the File Share Witness directory is available, and quorum cannot be maintained in a Windows Server 2008 failover cluster
http://support.microsoft.com/kb/978790
cluster resources unresponsive
http://social.technet.microsoft.com/Forums/hu/winserverClustering/thread/886a9cb3-7723-4b64-8c15-602dadf5ced9
Hope this helps!
TechNet Subscriber Support
If you are
TechNet Subscription user and have any feedback on our support quality, please send your feedback
here.
Lawrence
TechNet Community Support -
Hi Guys,
I get an SPN error for the Data Access Service. But i have registered the SPN's to the account.
Why does Opsmgr still gives this Alert:
Kind regards,
AndréThis is because by default Domain User accounts don’t have the ability to update their own SPNs.
To set your SPN correctly use the following commands with a user who has Domain Admin privileges:-
setspn –A MSOMSdkSvc/SERVERNAME DOMAIN\USERNAME
setspn –A MSOMSdkSvc/SERVERNAME.fqdn.name DOMAIN\USERNAME
If you wish to check that SPN registration has been set up correctly use:-
setspn -L DOMAIN\USERNAME
Also you can refer below link
http://www.systemcentercentral.com/forums-archive/topic/scom2012-spn-registration-error/
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
Mai Ali | My blog: Technical | Twitter:
Mai Ali -
Hi,
I am trying to test RFC connection but it is saying " program ID not registered" at gateway.
I registered in saprfc.ini file at gateway but still its not working.
Please let me know if you have any idea where should I register it.
Best Regards,
TusharI am not dure what is the setup you have in your env .
To register a progid
1.you have to have two separate applications
say one is sap and second is xxx
2.You have to register xxx applications prog id in sap.
3.you have to have both applications up and running.
4.It shall be a TCP/IP connection and register program id option in SAP system , define the gateway host and gateway service using sm59 .
5.The application xxx shall have information about sap system.
and then it works properly.
Hope it helps.
Amit -
wanted to create an RFC between BW and EP
and i am getting an error in BW when checking an
RFC between BW and EP.
Connection Error
Error when opening an RFC connection
Program STEEP_PORTAL not registered
SAP-Gateway on host stebw/sapgw00
DETAIL:TP STEEP_PORTAL not registered
gwr3cpic.c
Return Code:679It was occuring because time in the Java stack and the CRM ABAP stack was different.
Thanks And Regards
Akash Gupta -
Gateway error - Program not registered
Hello,
We were getting the following error while doing a "Connection test" of a TCP/IP RFC destination:
LOCATION SAP-Gateway on host gisrxx / sapgw00
ERROR program SBCX not registered
It's an ECC 6.0 system.
I found SAP note - - 353597 - Registering a RFC program
I executed the following command as sidadm
rfcexec -aSBCX -ggisrxx -xsapgw00
But the command keeps on running on teh command prompt.
And for that duration the RFC works.
But after sometime the command ends and comes back to command prompt and the RFC doesn't work any more.
Could you tell what needs to be done to resolve this issue?
Regards,
Gautam.Hi Gautam,
Please run the program in background (Unix) or as a service (Windows).
Please go through the following forum post. This should help.
Run rfcexec as service on windows
Br,
Venky -
H.323 Gateway is not Registering in CCM 4.1.2
H.323 Gateway. I am using cisco2620
========================================
nafay#sh run
Building configuration...
Current configuration : 966 bytes
version 12.2
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
hostname nafay
ip subnet-zero
mgcp
mgcp call-agent 192.168.0.111
mgcp dtmf-relay codec all mode out-of-band
call rsvp-sync
voice class h323 1
h225 timeout tcp establish 3
ccm-manager mgcp
interface FastEthernet0/0
ip address 192.168.0.55 255.255.255.0
duplex auto
speed auto
interface Serial0/0
no ip address
shutdown
ip classless
ip http server
voice-port 1/0/0
voice-port 1/0/1
voice-port 1/1/0
voice-port 1/1/1
dial-peer cor custom
dial-peer voice 100 voip
preference 1
destination-pattern 1...
voice-class h323 1
session target ipv4:192.168.0.111
dtmf-relay h245-alphanumeric
ip precedence 5
dial-peer voice 101 voip
preference 2
destination-pattern 1...
session target ipv4:192.168.0.111
dtmf-relay h245-alphanumeric
ip precedence 5
line con 0
line aux 0
line vty 0 4
end
nafay#
=========================================Is this config is OK. Still not registering
=====================================================
service timestamps debug uptime
service timestamps log uptime
hostname nafay
ip subnet-zero
call rsvp-sync
voice class h323 1
h225 timeout tcp establish 3
interface FastEthernet0/0
ip address 192.168.0.55 255.255.255.0
duplex auto
speed auto
interface Serial0/0
no ip address
shutdown
ip classless
ip http server
voice-port 1/0/0
voice-port 1/0/1
voice-port 1/1/0
voice-port 1/1/1
dial-peer cor custom
dial-peer voice 100 voip
preference 1
destination-pattern 1...
voice-class h323 1
session target ipv4:192.168.0.111
dtmf-relay h245-alphanumeric
ip precedence 5
dial-peer voice 101 voip
preference 2
destination-pattern 1...
session target ipv4:192.168.0.111
dtmf-relay h245-alphanumeric
ip precedence 5
line con 0
line aux 0
line vty 0 4 -
You are not registered to use this service
We have everything with BT including a new TV box with netflix etc, which is currently at the end of the 14 day cooling off period. If the following problem isn't resolved today I will be considering cancelling the TV contract and leaving BT all together.
Our phone was working ok on the 15/4/2015. I tried to dial a local number last night (16/4/2015) to hear 'you are not registered to use this service please contact your service provider'. I dialled again with the area code, same thing. Also with national and mobile calls. We can receive incoming calls. I rang the Indian call centre who said there is no problem with the line or the account (which is in credit) it must be the handset. I am waiting for them to ring me back but having searched the problem online I think this will be to no avail. I have read about prefixing phone numbers with 1280 and this has worked when trying to ring my own mobile, so it can't be a problem with the handset, can it?
I've seen it could be a problem with Indirect Access IDA being removed from my account (no idea how this might happen). I also know that there was a major outage last week (around 6/4/2015) in our area which led to the freeview HD channels not being available. I had to reset our router which cleared the problem but were Openreach in our area doing something to the exchange boxes etc?
I need this problem sorting out A.S.A.P. please.The fact that if you use 1280 it allows successful calls suggests your line is set as CPS , carrier pre select, if this has just happened it suggests a CPS provider has taken your 'line' for calls if not for line rental, but it's not properly set up otherwise calls would terminate it would just be billed by the mystery CPS provider
Have you had any approach by company's that sell this product ?, sometimes ISP's who's product includes calls can use CPS, if not, and you haven't been 'slammed' you need BT to set your line as non CPS , so BT handle your calls automatically without using 1280
This should be easy to get done, but the drones that answer the calls probably won't have a clue, hence the 'it must be your handset' nonsense they come up with, report the line faulty,don't accept an appointment, and insist they sent the problem to what was once called BT Operate, they look after the telephone exchange equipment and it's 'data', -
On my registered iTunes computer, the following message appears every time one plugs in a device and refuses to load said device to be synced: "This iPod cannot be used because the Apple Mobile Device service is not started". Each device has been registered onto this account and this computer, and all have worked finely in the past. I am so confused as to why now seemingly without reason, none of our apple devices (one iPod, two iPhones) are allowed to have music and other material downloaded onto them. Also, as a side note, they still are charged by plugging them into the computer, however they do not even show up on the left-hand sidebar in iTunes.
It should also be noted that for my iPhone it does not allow for the new update software to be uploaded; it just says that an error has occurred, nothing more.Try Here > AMDS > http://support.apple.com/kb/TS1567
-
my computer will on itunes said that it will not use my new ipod touch because it says that service is not started. I have registered my new ipod touch and am trying to download stuff from my itunelibrary. Ps help!
Try:
iPhone, iPad, iPod touch: How to restart the Apple Mobile Device Service (AMDS) on Windows -
Hi, I upgraded my iphone 4 (4.3.3) to iso 5 beta 6, but now it shows "No Service" at top left, and unable to complete your activation. Also tells that "this device is not registered as part of the iphone developer programme." How could I fix this problem? Please help me...,
I had a similar occurrence with my just activated iPhone 4.
I had been using the phone for three days when an odd occurrence with voice mail caused me to call tech support. After some discussion they decided to push the activation to my phone (even though I had been using it for three days). When I went to power it back up again I repeatedly got the "no service" notification. I got tech support on a land line and we tried hard reboots and so on. No joy. They told me to take it in to the point of sale and either the SIM card or the phone needed (or both) needed replacing.
I tried one last hard reboot after dinner and the phone came up with service, but I took it in to the point of sale in the morning and they swapped the SIM card out and I went to a Genius Bar appointment to get the phone checked out. It is supposedly OK, but I am still having some problems when syncing it so I will have to visit the Genius Bar again tomorrow about that. At least I have not experienced the "no service" problem in the roughly 24 hours since the SIM card was replaced. (Fingers crossed) -
While upgrading to CF7 from CF5, I am creating the new collections from Cf Admin. After creating, I indexed it from cf admin and then trying to search for the documents in that collection, and i am getting the following error. This was working yesterday. I have cheched the logs etc and nothing seems helpful in discovering what the issue is.
Document count is 11,745 and the size is 25,948 kb, which is not too much for a collection. I have tried to restart Cold Fusion Search Services and then ColdFusion Application services, but all in vain.
Any help on this would be greatly appreciated.
Detail
The collection you specified does not exists or is not registered with the ColdFusion Search Service.
Message
The collection rc_collectiom does not exist.
StackTrace
coldfusion.tagext.search.CollectionDoesNotExistException: The collection rc_collectiom does not exist. at coldfusion.tagext.search.SearchTag.verifyLocale(SearchTag.java:819) at coldfusion.tagext.search.SearchTag.doSearch(SearchTag.java:200) at coldfusion.tagext.search.SearchTag.doStartTag(SearchTag.java:159) at coldfusion.runtime.CfJspPage._emptyTag(CfJspPage.java:1915) at cfeFull2dText2dReDirect2ecfm511389924.runPage(C:\Inetpub\wwwroot\External\FullText\eFull- Text-ReDirect.cfm:43) at coldfusion.runtime.CfJspPage.invoke(CfJspPage.java:152) at coldfusion.tagext.lang.IncludeTag.doStartTag(IncludeTag.java:349) at coldfusion.runtime.CfJspPage._emptyTag(CfJspPage.java:1915) at cfApplication2ecfc179940445$funcONREQUEST.runFunction(C:\Inetpub\wwwroot\External\Applica tion.cfc:114) at coldfusion.runtime.UDFMethod.invoke(UDFMethod.java:344) at coldfusion.runtime.UDFMethod$ReturnTypeFilter.invoke(UDFMethod.java:290) at coldfusion.runtime.UDFMethod$ArgumentCollectionFilter.invoke(UDFMethod.java:254) at coldfusion.filter.FunctionAccessFilter.invoke(FunctionAccessFilter.java:56) at coldfusion.runtime.UDFMethod.runFilterChain(UDFMethod.java:207) at coldfusion.runtime.UDFMethod.invoke(UDFMethod.java:169) at coldfusion.runtime.TemplateProxy.invoke(TemplateProxy.java:194) at coldfusion.runtime.TemplateProxy.invoke(TemplateProxy.java:146) at coldfusion.runtime.AppEventInvoker.invoke(AppEventInvoker.java:72) at coldfusion.runtime.AppEventInvoker.onRequest(AppEventInvoker.java:178) at coldfusion.filter.ApplicationFilter.invoke(ApplicationFilter.java:215) at coldfusion.filter.RequestMonitorFilter.invoke(RequestMonitorFilter.java:51) at coldfusion.filter.PathFilter.invoke(PathFilter.java:86) at coldfusion.filter.LicenseFilter.invoke(LicenseFilter.java:27) at coldfusion.filter.ExceptionFilter.invoke(ExceptionFilter.java:69) at coldfusion.filter.BrowserDebugFilter.invoke(BrowserDebugFilter.java:52) at coldfusion.filter.ClientScopePersistenceFilter.invoke(ClientScopePersistenceFilter.java:2 8) at coldfusion.filter.BrowserFilter.invoke(BrowserFilter.java:38) at coldfusion.filter.GlobalsFilter.invoke(GlobalsFilter.java:38) at coldfusion.filter.DatasourceFilter.invoke(DatasourceFilter.java:22) at coldfusion.filter.RequestThrottleFilter.invoke(RequestThrottleFilter.java:115) at coldfusion.CfmServlet.service(CfmServlet.java:107) at coldfusion.bootstrap.BootstrapServlet.service(BootstrapServlet.java:78) at jrun.servlet.ServletInvoker.invoke(ServletInvoker.java:91) at jrun.servlet.JRunInvokerChain.invokeNext(JRunInvokerChain.java:42) at jrun.servlet.JRunRequestDispatcher.invoke(JRunRequestDispatcher.java:257) at jrun.servlet.ServletEngineService.dispatch(ServletEngineService.java:541) at jrun.servlet.jrpp.JRunProxyService.invokeRunnable(JRunProxyService.java:204) at jrunx.scheduler.ThreadPool$DownstreamMetrics.invokeRunnable(ThreadPool.java:318) at jrunx.scheduler.ThreadPool$ThreadThrottle.invokeRunnable(ThreadPool.java:426) at jrunx.scheduler.ThreadPool$UpstreamMetrics.invokeRunnable(ThreadPool.java:264) at jrunx.scheduler.WorkerThread.run(WorkerThread.java:66)So at last I figured this out myself and found a temporary resolution for this kind of problem. Majority of the times try creating the Collection through Cfcollection tag and then index it using cfindex tag, rather than performing these operations from the Cold Fusion 7 administrator.
The only reason I can think of which might have caused the issue is – I have thousands of documents in the collection which I indexed. So while indexing the page gets expired. So I tried again to index it. This time the collection got indexed fairly quickly and I got the response that the collection has been indexed successfully. So for the first time when I tried to index the collection, there might be some piece of code, which did not register the collection properly and hence giving this error.
When I did the same function using the code, with exactly same set of documents, it did not throw any error, even when I executed it for the first time. So the collection indexed properly.
I am not claiming that technically this theory is correct, but this seems to be the problem.
If someone knows technically what has happened at the back, please share it. For the time being, this is the fix – if you experience any problem in creating/indexing collections through cfadmin in CF7, do it thorough code. -
Service not registered with listener on one of the nodes?
We have an 11.2.0.1 oracle RAC with 2 nodes. Recently the listener died on node 1 and after a manual startup it seems like the service doesn't register with the listener on this node.
Here's what statusing the listener on both nodes shows:
[oracle@db01]$ $GRID_HOME/bin/lsnrctl status
LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 17-NOV-2010 12:27:49
Copyright (c) 1991, 2009, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 11.2.0.1.0 - Production
Start Date 17-NOV-2010 07:14:40
Uptime 0 days 5 hr. 13 min. 9 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /u01/app/11.2.0/grid/network/admin/listener.ora
Listener Log File /u01/app/oracle/diag/tnslsnr/db01/listener/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=LISTENER)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=192.168.128.4)(PORT=1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=192.168.128.14)(PORT=1521)))
Services Summary...
Service "+ASM" has 1 instance(s).
Instance "+ASM1", status READY, has 1 handler(s) for this service...
The command completed successfully
[oracle@db02 ~]$ $GRID_HOME/bin/lsnrctl status listener
LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 17-NOV-2010 12:30:08
Copyright (c) 1991, 2009, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 11.2.0.1.0 - Production
Start Date 17-NOV-2010 07:14:40
Uptime 0 days 5 hr. 15 min. 28 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /u01/app/11.2.0/grid/network/admin/listener.ora
Listener Log File /u01/app/oracle/diag/tnslsnr/db02/listener/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=LISTENER)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=192.168.128.5)(PORT=1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=192.168.128.15)(PORT=1521)))
Services Summary...
Service "+ASM" has 1 instance(s).
Instance "+ASM2", status READY, has 1 handler(s) for this service...
Service "prd1.somehost.net" has 1 instance(s).
Instance "prd12", status READY, has 1 handler(s) for this service...
Service "prd1XDB.somehost.net" has 1 instance(s).
Instance "prd12", status READY, has 1 handler(s) for this service...
The command completed successfully
The prd12 instance shows as registered with the listener on db02 but the prd11 doesn't on db01. Right now all connections are routed to the prd12 instance. Also trying to connect to prd11 manually returns "ORA-12505: TNS:listener does not currently know of SID given in connect descriptor". The prd11 instance is actually running and I can connect to it locally via 'sqlplis "/ as sysdba"' but not via 'sqlplus user/pass@prd1'. I'm wondering what went wrong and how to register the prd11 with the listener on db01.
Here's some more information
[oracle@db01 ~]$ $GRID_HOME/bin/srvctl status scan_listener
SCAN Listener LISTENER_SCAN1 is enabled
SCAN listener LISTENER_SCAN1 is running on node db02
SCAN Listener LISTENER_SCAN2 is enabled
SCAN listener LISTENER_SCAN2 is running on node db01
SCAN Listener LISTENER_SCAN3 is enabled
SCAN listener LISTENER_SCAN3 is running on node db01
[oracle@db01 ~]$ $GRID_HOME/bin/srvctl status scan
SCAN VIP scan1 is enabled
SCAN VIP scan1 is running on node db02
SCAN VIP scan2 is enabled
SCAN VIP scan2 is running on node db01
SCAN VIP scan3 is enabled
SCAN VIP scan3 is running on node db01
[oracle@db01 ~]$ $GRID_HOME/bin/srvctl status listener
Listener LISTENER is enabled
Listener LISTENER is running on node(s): db01,db02
Thanks in advance,
Nick
Edited by: user639426 on Nov 17, 2010 4:44 AMSeems like the LISTENER_SCAN2 and LISTENER_SCAN3 are running on node 1 but still I can't status them
[oracle@db01 ~]$ ps -ef | grep tns
oracle 6227 31486 0 08:24 pts/1 00:00:00 grep tns
oracle 18049 1 0 Nov17 ? 00:00:20 /u01/app/11.2.0/grid/bin/tnslsnr LISTENER -inherit
oracle 18120 1 0 Nov17 ? 00:00:16 /u01/app/11.2.0/grid/bin/tnslsnr LISTENER_SCAN2 -inherit
oracle 18131 1 0 Nov17 ? 00:00:05 /u01/app/11.2.0/grid/bin/tnslsnr LISTENER_SCAN3 -inherit
[oracle@db01 ~]$ $GRID_HOME/bin/lsnrctl status LISTENER_SCAN2
LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 19-NOV-2010 08:25:11
Copyright (c) 1991, 2009, Oracle. All rights reserved.
TNS-01101: Could not find service name LISTENER_SCAN2
[oracle@db01 ~]$ $GRID_HOME/bin/lsnrctl status LISTENER_SCAN3
LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 19-NOV-2010 08:25:18
Copyright (c) 1991, 2009, Oracle. All rights reserved.
TNS-01101: Could not find service name LISTENER_SCAN3
/u01/app/11.2.0/grid/network/admin/listener.ora contents:
LISTENER_SCAN2=(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=IPC)(KEY=LISTENER_SCAN2)))) # line added by Agent
LISTENER_SCAN3=(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=IPC)(KEY=LISTENER_SCAN3)))) # line added by Agent
LISTENER=(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=IPC)(KEY=LISTENER)))) # line added by Agent
LISTENER_SCAN1=(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=IPC)(KEY=LISTENER_SCAN1)))) # line added by Agent
ENABLE_GLOBAL_DYNAMIC_ENDPOINT_LISTENER_SCAN1=ON # line added by Agent
ENABLE_GLOBAL_DYNAMIC_ENDPOINT_LISTENER=ON # line added by Agent
ENABLE_GLOBAL_DYNAMIC_ENDPOINT_LISTENER_SCAN3=ON # line added by Agent
ENABLE_GLOBAL_DYNAMIC_ENDPOINT_LISTENER_SCAN2=ON # line added by Agent
/u01/app/oracle/product/11.2.0/dbhome_1/network/admin/tnsnames.ora contents:
PRD1 =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = prdcluster-scan)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = prd1.somehost.net)
Everything worked just fine for quite some time until I found the listener down one morning and started it up manually. I wonder if I didn't start up the processes correctly. I did:
$GRID_HOME/bin/srvctl stop scan_listener
$GRID_HOME/bin/srvctl stop scan
$GRID_HOME/bin/srvctl stop listener
$GRID_HOME/bin/srvctl start listener
$GRID_HOME/bin/srvctl start scan
$GRID_HOME/bin/srvctl start scan_listener
Is this the correct way of starting up the listener processes?
Nick -
Essbase server is invalid. Not registered with Shared Services
Hi,
I am trying to deploy EPMA Essbase application after we upgrade to 11.1.2.2 from 11.1.2.0. I get this error.
Application server '<Server>:1423' is invalid. It is not registered with Shared Services.
URI: http://<Server>/awb/integration.verifyApplication.do
Code: com.hyperion.awb.web.common.BaseServiceException
Description: Application server '<Server>:1423' is invalid. It is not registered with Shared Services.
Actor: noneAny specific post configuration task needs to be performed?
Regards,
Ragav.Hi,
We were able to resolve the issue. The "Invalid Deployment Information" test in the application diagnostics failed. We had to synchronize the deployment data and later we were able to validate the application.
Regards,
Ragav.
Maybe you are looking for
-
How to display Doc file format in the JEditPane?
At this time , JEditPane supports RTF and HTML file format ,but Could anyone tell me how to display DOC file format using JEditPane or other JTextComponents? Thx a lot! Caton
-
Can't compile webutil.pll in10g AS at Redhat AS3 Update1
I have installed 10g As in Redhat AS3 update1. I coundn't compile the webutil.pll is this system. I wanted to use webutil component ,the error message is frm-30312. my command: f90genm.sh webutil.pll dev/dev@dbms Module_Type=LIBRARY Compile_All=YES D
-
Security in essbase at the database level
i need to edit users ability to access various databases within an application in essbase. the user has been provisioned in shared services to the app, but, it appears to further restrict particular databases, that has to be done in essbase. right? i
-
All imported photos need cropping
I imported a large number of photos and everyone of them has a fine white line along one or two edges making it necessary for me to lightly crop each one...I imported nearly 3000 photos. Why did this happen...and does iPhoto have a batch feature for
-
Reg. reading database tables.
Hi, I have stored some database table names in a custom table. In my custom report, I have to read those database tables depending on certain criteria. For ex: I have the table names 'MARA' , 'MARC' stored in my custom table ztables. In my report, if