Service Pack 1 & CU DEC 2014 installation procedure

Hi together!
A short question on the update process for SharePoint 2013. Altogether I'm quite aware of the update process and all the pitfalls that come with it. So, we're on March 2013 PU and planning to install
Service Pack 1 AND December 2014 CU in one rush. In addition, at least one (German) language pack is installed.
Is it correct to install all the binaries on every SharePoint server first (in order SP1, Language Pack (LP) SP1, DEC 2014 CU) and THEN run the Config Wizard sequentially on all servers? Basically,
this method should be valid and correct, however, I'm not sure if in case of SP1 a Config Wizard run is neccessary directly after installing SP1 with LP and if that is finished proceed with CU installation.
Thanks for your support!

I have done exactly what you describe without an issue. Having said that I normally do the upgrade to SP1 with LP and then run the Config Wizard. Then go back and do the CU install and run the wizard again. As I said, I've done it in
one session, but would recommend doing the SP1 first.
Paul Stork SharePoint Server MVP
Principal Architect: Blue Chip Consulting Group
Blog: http://dontpapanic.com/blog
Twitter: Follow @pstork
Please remember to mark your question as "answered" if this solves your problem.

Similar Messages

Apple Mobile Device Service (AMDS) won't install with iTunes,either V10.7 or V11. The service can't be started b/c the software is not there. Windows 7 with latest service pack. V11 iTunes installs

Apple Mobile Device Service (AMDS) won't install with iTunes,either V10.7 or V11. The service can't be started b/c the software is not there. Windows 7 with latest service pack. V11 iTunes installs fine, iPod found, no iPhone 5 b/c no AMDS. Error "insufficient premissions to install AMDS" Tried numerous uninstall / reinstall combinations, installed iTunes as administrator, etc. Somethings not right. What the Heck ?

See the following article for dealing with Apple Mobile Device Services: http://support.apple.com/kb/TS1567
Downloading and installing iTunes will not fix this problem. If the other troubleshooting steps do not work, go to the Control Panel and uninstall iTunes, Apple Mobile Device Services, Quicktime and any other Apple program that might be present. Reboot your computer, then download and install the latest version of iTunes.

Related to "service pack is a full installation"

Hi
In Metalink if patch have mentioned this line in ReadMe doc " service pack is a full installation" (for essbase client, Essbase server, EAS and Aps)
Can i go and install without installing and configuring earlier version?
I mean should i install new patch directly without earlier version of similar Hyperion component to save my time.
Version 9.3.1

If it is a full installation and there is no mention of having to install the previous version then you should be alright just to install that version.
Cheers
John
http://john-goodwin.blogspot.com/

KB2977326 - Security Update for SQL Server Service Pack 1 repeatedly fails to install

This update fails to install every day when I shut down my computer. Here is the WindowsUpdate.Log:
2014-12-02 15:50:11:469
420 44c
AU #########
2014-12-02 15:50:11:469
420 44c
AU # Initiating install at shutdown
2014-12-02 15:50:11:469
420 44c
AU # Approved updates = 1
2014-12-02 15:50:11:516
420 44c
AU <<## SUBMITTED ## AU: Install updates / installing updates [CallId = {685C12BB-7AA9-4A31-9620-8F306EEE31C3}]
2014-12-02 15:50:11:516
420 44c
Shutdwn InstallAtShutdown starts.
2014-12-02 15:50:11:516
420 1528
Agent *************
2014-12-02 15:50:11:516
420 1528
Agent ** START ** Agent: Installing updates [CallerId = AutomaticUpdates]
2014-12-02 15:50:11:516
420 1528
Agent *********
2014-12-02 15:50:11:516
420 1528
Agent * Updates to install = 1
2014-12-02 15:50:11:531
420 1528
Agent * Title = Security Update for SQL Server 2012 Service Pack 1 (KB2977326)
2014-12-02 15:50:11:531
420 1528
Agent * UpdateId = {E0D65CC4-3B13-4352-BD89-A28C5F4C5017}.200
2014-12-02 15:50:11:531
420 1528
Agent * Bundles 1 updates:
2014-12-02 15:50:11:531
420 1528
Agent * {C076E757-1A4F-44DB-823B-CFFC07CD7D38}.200
2014-12-02 15:50:11:547
420 16d8
Shutdwn InstallAtShutdown got install progress.
2014-12-02 15:50:12:327
420 d4c
Report CWERReporter finishing event handling. (00000000)
2014-12-02 15:50:20:548
420 44c
AU WARNING: Pending directive, 'Install Approval', is not applicable
2014-12-02 15:50:24:417
420 16d8
Shutdwn InstallAtShutdown got install progress.
2014-12-02 15:50:24:432
420 16d8
Shutdwn InstallAtShutdown got install progress.
2014-12-02 15:50:24:432
420 1528
DnldMgr Preparing update for install, updateId = {C076E757-1A4F-44DB-823B-CFFC07CD7D38}.200.
2014-12-02 15:50:25:119
2052 608
Misc =========== Logging initialized (build: 7.6.7600.320, tz: -0600) ===========
2014-12-02 15:50:25:119
2052 608
Misc = Process: C:\Windows\system32\wuauclt.exe
2014-12-02 15:50:25:119
2052 608
Misc = Module: C:\Windows\system32\wuaueng.dll
2014-12-02 15:50:25:119
2052 608
Handler :::::::::::::
2014-12-02 15:50:25:119
2052 608
Handler :: START :: Handler: Command Line Install
2014-12-02 15:50:25:119
2052 608
Handler :::::::::
2014-12-02 15:50:25:119
2052 608
Handler : Updates to install = 1
2014-12-02 15:50:25:119
420 16d8
Shutdwn InstallAtShutdown got install progress.
2014-12-02 15:52:23:991
420 44c
AU AU setting next sqm report timeout to 2014-12-03 21:52:23
2014-12-02 15:54:39:587
2052 608
Handler : WARNING: Command line install completed. Return code = 0x84b20001, Result = Failed, Reboot required = false
2014-12-02 15:54:39:587
2052 608
Handler : WARNING: Exit code = 0x8024200B
2014-12-02 15:54:39:587
420 16d8
AU >>## RESUMED ## AU: Installing update [UpdateId = {E0D65CC4-3B13-4352-BD89-A28C5F4C5017}]
2014-12-02 15:54:39:587
2052 608
Handler :::::::::
2014-12-02 15:54:39:587
2052 608
Handler :: END :: Handler: Command Line Install
2014-12-02 15:54:39:587
2052 608
Handler :::::::::::::
2014-12-02 15:54:39:587
420 16d8
AU # WARNING: Install failed, error = 0x80070643 / 0x84B20001
2014-12-02 15:54:39:587
420 16d8
Shutdwn InstallAtShutdown got install progress.
2014-12-02 15:54:39:711
420 1528
Report REPORT EVENT: {DFA9CDC8-334A-4E57-9588-77B8E980833D}
2014-12-02 15:54:39:587-0600 1
198 101
{E0D65CC4-3B13-4352-BD89-A28C5F4C5017}
200 80070643
AutomaticUpdates Failure
Content Install Installation Failure: Windows failed to install the following update with error 0x80070643: Security Update for SQL Server 2012 Service Pack 1 (KB2977326).
2014-12-02 15:54:39:727
420 1528
Report CWERReporter::HandleEvents - WER report upload completed with status 0x8
2014-12-02 15:54:39:727
420 1528
Report WER Report sent: 7.6.7600.320 0x80070643 E0D65CC4-3B13-4352-BD89-A28C5F4C5017 Install 101 Unmanaged
2014-12-02 15:54:39:727
420 1528
Report CWERReporter finishing event handling. (00000000)
2014-12-02 15:54:39:805
420 1528
Agent *********
2014-12-02 15:54:39:805
420 16d8
AU Install call completed.
2014-12-02 15:54:39:805
420 1528
Agent ** END ** Agent: Installing updates [CallerId = AutomaticUpdates]
2014-12-02 15:54:39:805
420 16d8
AU # WARNING: Install call completed, reboot required = No, error = 0x00000000
2014-12-02 15:54:39:805
420 1528
Agent *************
2014-12-02 15:54:39:805
420 16d8
AU #########
2014-12-02 15:54:39:805
420 16d8
AU ## END ## AU: Installing updates [CallId = {685C12BB-7AA9-4A31-9620-8F306EEE31C3}]
2014-12-02 15:54:39:805
420 16d8
AU #############
jim...

Hello,
Please examine the Summary.txt log file. The following article may help you locate the file on disk:
http://msdn.microsoft.com/en-us/library/ms143702(v=sql.110).aspx
If you find the sentence “A failure was detected for a previous installation” on the Summary.txt log file, please repair SQL Server using the following article:
http://msdn.microsoft.com/en-us/library/Cc646006(v=sql.110).aspx
If you find other errors, please share the content of the Summary.txt log file with us.
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

Audigy 4 asking for XP Service Pack 2 CD, no such th

When installing Audigy 4, the software asks to put in the Windows XP Service Pack 2 CD. Of course there is no such CD as this PC came with Service Pack and was on line updated to Service Pack 2. The installation won't complete and continues to reinstall.
The actual message is "Some files on Windows XP Professional Service pack 2 CD are needed". This is very disappointing.

freesky wrote:
Here's the direct download for the Windows XP Service Pack 2 from microsoft. Just to make sure you have it installed, download it and install it.Windows XP Service Pack 2 Network Installation Package for IT Professionals and Developershttp://www.microsoft.com/downloads/d...DisplayLang=en
I'm I'm failing to communicate here... I DO have it already installed. So, if it is already installed on my HD, why does the Creative CD prompt me for the service pack CD ???

Windows vista service pack 1 keeps installing

My computer crashed, so had hard drive reformated and re-loading Windows Vista Ultimate 32-bit. Doing all the updates via Windows Update, I get to Service Pack 1. It installs successfully, but won't move onto Service pack 2. I have like 10 supposed successful
installations of Service Pack 1. I even downloaded SP2 and of course it won't install because it says I have to install SP1 first. Read documentation, searched forums and didn't find an answer to this problem. I even downloaded "Mr Fixit" and this didn't help.
I'm somewhat technical, but not a pro. Can's figure this out. Can someone help or point me in the right direction? Thanks.

Maybe im just stupid... But NOTHING that anyone has posted here has helped me at all :P Could someone please explain to me what i need to do to install service pack 1 and 2... I could find someone named Betts83 on the forums that someone said i should
go to and read some posts i found 3 posts.... One that was this exact thread, one that was posted 1st of November and another one wich was posted in 2012... The one from 1st of November didn't help me... And it was the one people said i was suppose to go to
to get help, but it still didn't to anything. Im starting to get impatient because i want to install Assassin's Creed 3, but it requires service pack 2 or higher to run! Maybe because this thread is so old i probably wont get an answer but if someone
would help me fix it it would be much appreciated.

Need SQL Server service packs installation procedure

Hey Guys,
I am in the process of installing service packs to my SQL Server 2008 and R2 editions, I was searching for the installation procedure in technet for this but nothing was provided for this, I tried to read the
"readme" and setup documentation provided in the SP 4 download page but its useless since its redirecting again to some other page which again points to same download page, It makes me wonder if there are any procedures provided by Microsoft for
this. Let me know if anyone has it. I don't want to follow any third party websites/ individual bloggers providing best practices/installation procedures.
My Environment: SQL SERVER 2008/ R2 (STANDARD) and these are standalone
machines.
OS: Windows server 2008 R2 STANDARD
With regards,
Gopinath.
With regards, Gopinath.

Copy the patch files to the server
Run the patch file and follow the on-screen instructions
Select the instances that you wish to patch
Allow the patch to finish
Reboot if a reboot is required (the patch will tell you if there were any locked files)
For more info refer this link
Please Mark this as Answer if it solved your issue
Please vote this as Helpful information if it helps to solve your issue

Service Pack 3 appears to have broken the Report Builder click once installation

We are running SQL Server reporting services on SQL Server 2008 R2. Recently we installed the service pack 3 and we now get the following error when a user clicks the Report Builder link:
Application validation did not succeed. Unable to continue.
And from the Log:
ERROR DETAILS
Following errors were detected during this operation.
* [10/14/2014 9:04:32 AM] System.Deployment.Application.InvalidDeploymentException (HashValidation)
  - File, Microsoft.ReportingServices.ComponentLibrary.Controls.dll, has a different computed hash than specified in manifest.
  - Source: System.Deployment
  - Stack trace:
   at System.Deployment.Application.ComponentVerifier.VerifyFileHash(String filePath, Hash hash)
   at System.Deployment.Application.ComponentVerifier.VerifyFileHash(String filePath, HashCollection hashCollection)
   at System.Deployment.Application.ComponentVerifier.VerifyComponents()
   at System.Deployment.Application.DownloadManager.DownloadDependencies(SubscriptionState subState, AssemblyManifest deployManifest, AssemblyManifest appManifest, Uri sourceUriBase, String targetDirectory, String group, IDownloadNotification
notification, DownloadOptions options)
   at System.Deployment.Application.ApplicationActivator.DownloadApplication(SubscriptionState subState, ActivationDescription actDesc, Int64 transactionId, TempDirectory& downloadTemp)
   at System.Deployment.Application.ApplicationActivator.InstallApplication(SubscriptionState& subState, ActivationDescription actDesc)
   at System.Deployment.Application.ApplicationActivator.PerformDeploymentActivation(Uri activationUri, Boolean isShortcut, String textualSubId, String deploymentProviderUrlFromExtension, BrowserSettings browserSettings, String& errorPageUrl)
   at System.Deployment.Application.ApplicationActivator.ActivateDeploymentWorker(Object state)
I'm at a bit of a loss of what to do since all recommended solutions I've found are for installing the latest service pack or cumulative update (from threads several years old). By installing service pack 3 we are at the latest upgrade path for 2008
R2 and ironically enough, this is what appears to have broken the click once installer.

Hi Matt,
This is an known issue in SSRS 2008 R2 SP3. For this issue, Microsoft has published an article addressing this issue. It is not planning to release a fix for this defect. But there's workarounds for this issue. Please refer to the link below:
Report Builder of SQL Server 2008 R2 Service Pack 3 does not launch.
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

Office 2013 with Service Pack 1 installation error about "search path"

I have an automated installation technique that has worked fine with Office 2010 Pro Plus (32-bit), incorporating the latest Service Pack into the network administrative installation point (under \updates), adding 10 foreign languages to the network administrative
installation point, creating a custom .msp with the OCT (that goes into \updates too), editing the config.xml files, and then running setup.exe from that network administrative installation point. This works on 32-bit Windows XP clients and on 32- and 64-bit
Windows 7 clients.
For Office 2013 Pro Plus, I have built the network administrative installation point exactly the same way (original DVD files + languages + SP1 updates + config.xml updates), but the installation is failing with every type of client, all with
the same error message. The network administrative installation point is readable by the normal installing account, but I even get the same error when I login as me and initiate setup.exe manually, and I have all rights to this point.
Here's the critical point from a log file:
2014/03/11 11:53:49:691::[2372] DistributionPoint parsed. The distribution point is now set to: \\archive.ads.college.edu\archive\KBOXalt\Office2013
2014/03/11 11:53:49:691::[2372] COMPANYNAME specified in config.xml.
2014/03/11 11:53:49:691::[2372] USERNAME specified in config.xml.
2014/03/11 11:53:49:800::[2372] Setupexe Resiliency Mode is set to [PerformIfApplicable]; thus Resiliency is [disabled] for the [InstallExecutionMode]
2014/03/11 11:53:49:910::[2372] Searching for default versions of resource files under the folder [\\archive.ads.college.edu\archive\KBOXalt\Office2013].
2014/03/11 11:53:50:019::[2372] Error: GetDirectories: search path \\archive.ads.college.edu\archive\KBOXalt\Office2013 does not exist
ErrorCode: 0(0x0). Failed final attempt to load a setupexe resource file.
2014/03/11 11:53:50:019::[2372] Error: GetDirectories: search path \\archive.ads.college.edu\archive\KBOXalt\Office2013 does not exist
Type: 34::InvalidDirectory.
2014/03/11 11:53:50:019::[2372] WER element [SuppressModal] is set to value [true]
2014/03/11 11:53:50:019::[2372] WER element [P4] is set to value [InvalidDirectory]
2014/03/11 11:53:50:019::[2372] Catalyst execution finished: 03/11/2014 11:53:50. Return code: 30034. Exception caught: InvalidDirectory.
2014/03/11 11:53:50:019::[2372] PERF: TickCount=894821 Name=RunSetup Description=End function
I cannot find any references to this exact error anywhere on the Internet. Can anyone tell me what this means, and how I fix it?

As automated, the utility that runs setup.exe maps a drive letter to
\\archive.ads.college.edu\archive\KBOXalt using a kboxmap AD account, which has read access to the whole \KBOXalt tree. I used that same kboxmap AD account manually to simulate what the utility does, and hit the same problem. But here's what's
odd: right next to that
\\archive.ads.college.edu\archive\KBOXalt\Office2013 directory is an
\\archive.ads.college.edu\archive\KBOXalt\Office2010 directory, both created the same way, and the Office 2010 installation has always worked perfectly using the kboxmap AD account. I don't understand why Office 2013 is only working for an account with
read/write access, where Office 2010 worked fine for an account with only read access. Especially when the Office 2013 resource kit documentation clearly states that the account running the installation should only have read access, nothing more. (All this
KBOX stuff comes from the fact that our deployment environment is a Dell KACE KBOX 1000. However, that plays no part in the problem: ignoring the KBOX 1000, I can manually recreate the problem every time.)

The procedure entry point getlogicalprocessorinformation could not be located in the dynamic link kernel32.dll . I got this error after downloading and installing Frame MAker 12. My system os is service pack 2.

The above mentioned error is displayed when i open Adobe Framemaker 12 after installing it.
the procedure entry point getlogicalprocessorinformation could not be located in the dynamic link kernel32.dll
this is the error.
my os is windows service pack 2
2 gb ram

You don't mention which specific version of the operating system that you are using - Windows XP, Vista, or 7 and whether you're using a 32-bit or 64-bit version.
FWIW, kernell32.dll is a Windows system-level module, so it's possible that you have some corruption in your Windows installation which is preventing FM from launching.
Also, 2Gb of RAM is a bit lean for FM.

Service packs and patch MS14-044 keeps failing during a installation on a cluster

Hi,
We have a cluster with several sql2008 R2 instances and recently we had to add one more. But now when we try to apply a service pack or patch on that instance on one the same node the installation fails. They all fail with the same error:
SP1
2014-09-17 12:53:40 Slp: Parameter 0 : SQL2008@RTM@KB2528583
2014-09-17 12:53:40 Slp: Parameter 1 : 0x4A9286D0
2014-09-17 12:53:40 Slp: Parameter 2 : 0x4A9286D0
2014-09-17 12:53:40 Slp: Parameter 3 : 0x54657B2B
2014-09-17 12:53:40 Slp: Parameter 4 : 0x54657B2B
SP2
2014-09-16 12:56:23 Slp: Parameter 0 : SQL2008@RTM@KB2630458
2014-09-16 12:56:23 Slp: Parameter 1 : 0x4A9286D0
2014-09-16 12:56:23 Slp: Parameter 2 : 0x4A9286D0
2014-09-16 12:56:23 Slp: Parameter 3 : 0x54657B2B
2014-09-16 12:56:23 Slp: Parameter 4 : 0x54657B2B
MS14-044
2014-09-16 20:55:15 Slp: Parameter 0 : SQL2008@RTM@KB2977320
2014-09-16 20:55:15 Slp: Parameter 1 : 0x4A9286D0
2014-09-16 20:55:15 Slp: Parameter 2 : 0x4A9286D0
2014-09-16 20:55:15 Slp: Parameter 3 : 0x54657B2B
2014-09-16 20:55:15 Slp: Parameter 4 : 0x54657B2B 2014-09-16 20:55:05 Slp: Error: Action "Microsoft.SqlServer.Configuration.SetupExtension.InitializeUIDataAction" threw an exception during execution.
2014-09-16 20:55:06 Slp: Received request to add the following file to Watson reporting: C:\Users\adm_koomenh\AppData\Local\Temp\tmp7FDE.tmp
2014-09-16 20:55:06 Slp: The following is an exception stack listing the exceptions in outermost to innermost order
2014-09-16 20:55:06 Slp: Inner exceptions are being indented
2014-09-16 20:55:06 Slp:
2014-09-16 20:55:06 Slp: Exception type: System.Resources.MissingManifestResourceException
2014-09-16 20:55:06 Slp: Message:
2014-09-16 20:55:06 Slp: Could not find any resources appropriate for the specified culture or the neutral culture. Make sure "Errors.resources" was correctly embedded or linked into assembly "Microsoft.SqlServer.Discovery"
at compile time, or that all the satellite assemblies required are loadable and fully signed.
2014-09-16 20:55:06 Slp: Stack:
2014-09-16 20:55:06 Slp: at System.Resources.ResourceManager.InternalGetResourceSet(CultureInfo culture, Boolean createIfNotExists, Boolean tryParents)
2014-09-16 20:55:06 Slp: at System.Resources.ResourceManager.GetObject(String name, CultureInfo culture, Boolean wrapUnmanagedMemStream)
2014-09-16 20:55:06 Slp: at Microsoft.SqlServer.Discovery.MsiException.GetErrorMessage(Int32 errorNumber, CultureInfo culture)
2014-09-16 20:55:06 Slp: at Microsoft.SqlServer.Discovery.MsiException.GetErrorMessage(MsiRecord errorRecord, CultureInfo culture)
2014-09-16 20:55:06 Slp: at Microsoft.SqlServer.Discovery.MsiException.get_Message()
2014-09-16 20:55:06 Slp: at System.Exception.ToString()
2014-09-16 20:55:06 Slp: at System.Exception.ToString()
2014-09-16 20:55:06 Slp: at System.Exception.ToString()
2014-09-16 20:55:06 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionEngine.RunActionQueue()
2014-09-16 20:55:06 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.Workflow.RunWorkflow(WorkflowObject workflowObject, HandleInternalException exceptionHandler)
2014-09-16 20:55:06 Slp: at Microsoft.SqlServer.Chainer.Setup.Setup.RunRequestedWorkflow()
2014-09-16 20:55:06 Slp: at Microsoft.SqlServer.Chainer.Setup.Setup.Run()
2014-09-16 20:55:06 Slp: at Microsoft.SqlServer.Chainer.Setup.Setup.Start()
2014-09-16 20:55:06 Slp: at Microsoft.SqlServer.Chainer.Setup.Setup.Main()
2014-09-16 20:55:15 Slp: Watson Bucket 1
Original Parameter Values
2014-09-16 20:55:15 Slp: Parameter 0 : SQL2008@RTM@KB2977320
2014-09-16 20:55:15 Slp: Parameter 1 : System.Resources.ResourceManager.InternalGetResourceSet
2014-09-16 20:55:15 Slp: Parameter 2 : System.Resources.ResourceManager.InternalGetResourceSet
2014-09-16 20:55:15 Slp: Parameter 3 : System.Resources.MissingManifestResourceException@-2146233038
2014-09-16 20:55:15 Slp: Parameter 4 : System.Resources.MissingManifestResourceException@-2146233038
2014-09-16 20:55:15 Slp:
Final Parameter Values
Note that on the other cluster node we have no problem at all but patching one side and the other is a no go.
regards
Hans Koomen

1st instance: Microsoft SQL Server 2008 R2 (SP2) - 10.50.4033.0 (X64) Jul 9 2014 16:04:25 Copyright (c) Microsoft Corporation Standard Edition (64-bit) on Windows NT 6.1 <X64> (Build 7601: Service Pack 1)
2nd instance: Microsoft SQL Server 2008 R2 (SP2) - 10.50.4033.0 (X64) Jul 9 2014 16:04:25 Copyright (c) Microsoft Corporation Standard Edition (64-bit) on Windows NT 6.1 <X64> (Build 7601: Service Pack 1)
3rd instance: Microsoft SQL Server 2008 R2 (SP2) - 10.50.4033.0 (X64) Jul 9 2014 16:04:25 Copyright (c) Microsoft Corporation Standard Edition (64-bit) on Windows NT 6.1 <X64> (Build 7601: Service Pack 1)
4th instance: Microsoft SQL Server 2008 R2 (RTM) - 10.50.1600.1 (X64) Apr 2 2010 15:48:46 Copyright (c) Microsoft Corporation Standard Edition (64-bit) on Windows NT 6.1 <X64> (Build 7601: Service Pack 1)
Furthermore using http://support.microsoft.com/kb/2015100/es we find this:
PRODUCT NAME : SQL Server 2008 R2 SP2 Database Engine Services
================================================================================
Product Code: {2E81ADBE-DED7-4B54-9C8D-FBD885C259C5}
Version : 10.52.4000.0
Most Current Install Date: 20140718
Target Install Location:
Registry Path:
HKEY_CLASSES_ROOT\Installer\Products\EBDA18E27DED45B4C9D8BF8D582C955C\SourceList
Package : sql_engine_core_inst_loc.msi
Install Source: \1033_ENU_LP\x64\setup\sql_engine_core_inst_loc_msi\
LastUsedSource: n;1;E:\software\SQL2008R2_Std_X64\1033_ENU_LP\x64\setup\sql_engine_core_inst_loc_msi\
sql_engine_core_inst_loc.msi exists on the LastUsedSource path, no actions needed.
Installer Cache File: C:\Windows\Installer\21807f.msi
while the log states:
2014-09-19 14:56:31 Slp: Package sql_engine_core_inst_loc_Cpu64_1033: - The path of cached MSI package is: C:\Windows\Installer\21807f.msi . The RTM product version is:
10.50.1600.1

SQL service pack installation

Installing SQL 2005 through SQL4SAP.VBS will install its available service pack 2 automatically (or) Do we need to install manually.
Can we install the service pack 2 manually even after SAP Installtion .If so,please give the procedure.
Thanks

Hi,
Installing SQL 2005 through SQL4SAP.VBS will install its available service pack 2 automatically (or) Do we need to install manually.
It will automatically install in the process of SQL server installation.
Later you can even install SP3 which is available on Microsoft website.
Regards
Rajesh Narkhede

Windows XP Service Pack 2 Installer

So I have a relatively simple application. I it just reads and writes CAN data using a Vector CANcase USB CAN device, and these drivers. I developed the source in LabVIEW 2012 SP1 in Windows 7 x64. I built the EXE and it works fine, I then made an installer. Under the Additional Installers I only included the NI LabVIEW Run-Time Engine 2012 SP1 f9. I unchecked all the components under it because I knew I didn't need them.
I tested the installer on my XP SP3 machine and it worked great. Then another user wanted the software and had XP SP2. I tried the installer and it said it requires XP Service Pack 3 or newer. So I opened the project I used to make the installer, and under the "System Requirements" it already had the oldest option selected which was Windows XP Service Pack 2 or later.
My solution is to update the PC and it is in the process of doing that right now. So for me this is fixed, but is this an issue? And anyone else that sees this issue you aren't crazy.
Unofficial Forum Rules and Guidelines - Hooovahh - LabVIEW Overlord
If 10 out of 10 experts in any field say something is bad, you should probably take their opinion seriously.

Yes, I've had the same problem. I believe it had something to do with .NET (on which some NI components rely?) only being supported by XP SP3.
If you read here - it mentions that the latest service pack may be required for some operating systems.
The one thing that is weird is that the 2012 LV Runtime apparently supports all service packs of XP but the 2013 Runtime only supports SP3. Actually, looking at the download page for the 2012 SP1 F9 runtime it says it only supports XP SP3 so during one of the updates they must have changed the minimum requirement.
Maybe you could try installing an older version of the LV2012 runtime which works with SP2?
Certified LabVIEW Architect, Certified TestStand Developer
NI Days (and A&DF): 2010, 2011, 2013, 2014
NI Week: 2012, 2014
Knowledgeable in all things Giant Tetris and WebSockets

Having problems downloading itunes 10.5.2; box states windows installer issue. I have a 2005 with windows XP and service pack 2. Any ideas?

Just bought a new ipod touch for my daughter. It won't sync without itunes 10.5.2 loaded on our computer (a 2005 HP with Windows XP and service pack 2.) When I've tried to load 10.5.2, I get an error message box stating there is a problem with my Windows installer. I've tried loading the windows installer hot fix KB942288-v3-x86, but it didn't help. Any suggestion?

Hi Lorheak,
thanks for the quick reply. I had the same idea already yesterday. I use Norton Internet Security for a long time now without any problems. I think this a Apple or Microsoft problem, because the popup window which appear come from Windows DEP. I got no message from the firewall with any problem. I check the log files from Norton and Windows already but find nothing. This is a very strange problem. In the past I have had a lot of other problems with iTunes upgrades. Everytime I accept the installation of the newest version I got errors regarding missing "msi" files.
Greetings Gert

Windows vista home premium service pack 2.error measage __(the windows installer service could not be accessed.this can occur if the windows installer is not correctly installed .contact your support personnel for assistance )no error nurber

windows vista home premium service pack 2。error measage __（the windows installer service could not be accessed.this can occur if the windows installer is not correctly installed .contact your support personnel for assistance ）no error nurber

Hi Abdallah,
According to your description, could you please post the summary and detail logs for further analysis? By default, the logs can be found in: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log.
Usually, the error occurs when the Windows Installer Service is not running or the Windows Installer registry settings are corrupted. I recommend you reset the Windows Installer Service settings in the registry and restart the Windows Installer Service,
then reinstall SQL Server 2008 R2. For more details, please review this similar
article.
Thanks,
Lydia Zhang

Service Pack 1 & CU DEC 2014 installation procedure

Similar Messages

Maybe you are looking for