Service pack for 5.1

""Make sure you grab the latest service pack for 5.1""
wow - where i can get it?

You can try this...to download service pack!!
http://commerce.beasys.com/downloads/weblogic_server.jsp
Regards
Mauricio

Similar Messages

Service Pack for Proliant installing successfully but returning failure in OSD task sequence

Building bare metal servers with SCCM 2012 SP1 CU2 OSD and running into an issue with HPs where they attempt to install the Service Pack for Proliant 2013.02.0. I am using a package with a program. Here is the program command line:
Hpsum.exe /use_latest /allow_non_bundle_components /current_credential /silent
The application installs successfully but there is a distinct delay and then errors thrown that fails the TS. Setting 'continue on error' is a work around but not what I want to have in the production environment. How can I get around this issue?
This is the same exact package and program that ran perfectly fine in SCCM 2007, but we are seeing this as a new issue since the migration to SCCM 2012.
I'd like to solve this issue as well as get rid of the "Waiting for job status notification....InstallSoftware"
Any suggestions?
SMSTS.LOG
Invoking Execution Manager to install software InstallSoftware
12/3/2013 9:59:49 AM 1568 (0x0620)
Installing software for PackageID='WCD002D2' ProgramID='Silent install' AdvertID='WC120008' has started, jobID='{8B4082A9-9477-4D1F-9DEC-6A3F19EC3F6F}'
InstallSoftware 12/3/2013 9:59:50 AM
1568 (0x0620)
Setting TSEnv variable 'SMSTSInstallSoftwareJobID_WCD002D2_WC120008_Silent install'='{8B4082A9-9477-4D1F-9DEC-6A3F19EC3F6F}'
InstallSoftware 12/3/2013 9:59:50 AM
1568 (0x0620)
Waiting for installation job to complete.. InstallSoftware
12/3/2013 9:59:50 AM 1568 (0x0620)
Waiting for job status notification... InstallSoftware
12/3/2013 10:00:20 AM 1568 (0x0620)
Waiting for job status notification... InstallSoftware
12/3/2013 10:00:50 AM 1568 (0x0620)
Waiting for job status notification... InstallSoftware
12/3/2013 10:01:20 AM 1568 (0x0620)
Waiting for job status notification... InstallSoftware
12/3/2013 10:01:50 AM 1568 (0x0620)
Waiting for job status notification... InstallSoftware
12/3/2013 10:02:20 AM 1568 (0x0620)
Waiting for job status notification... InstallSoftware
12/3/2013 10:02:50 AM 1568 (0x0620)
Waiting for job status notification... InstallSoftware
12/3/2013 10:03:20 AM 1568 (0x0620)
Waiting for job status notification... InstallSoftware
12/3/2013 10:03:50 AM 1568 (0x0620)
Waiting for job status notification... InstallSoftware
12/3/2013 10:04:20 AM 1568 (0x0620)
Launching command shell. OSDSetupHook
12/3/2013 10:04:25 AM 2696 (0x0A88)
Windows station: WinSta0 OSDSetupHook
12/3/2013 10:04:25 AM 2696 (0x0A88)
Desk"Apple-tab-span" style="white-space:pre;"> OSDSetupHook
12/3/2013 10:04:25 AM 2696 (0x0A88)
executing command: C:\WINDOWS\system32\cmd.exe /k
OSDSetupHook 12/3/2013 10:04:25 AM
2696 (0x0A88)
executed command: C:\WINDOWS\system32\cmd.exe /k
OSDSetupHook 12/3/2013 10:04:25 AM
2696 (0x0A88)
Waiting for job status notification... InstallSoftware
12/3/2013 10:04:50 AM 1568 (0x0620)
Waiting for job status notification... InstallSoftware
12/3/2013 10:05:20 AM 1568 (0x0620)
Waiting for job status notification... InstallSoftware
12/3/2013 10:05:50 AM 1568 (0x0620)
Waiting for job status notification... InstallSoftware
12/3/2013 10:06:20 AM 1568 (0x0620)
Waiting for job status notification... InstallSoftware
12/3/2013 10:06:50 AM 1568 (0x0620)
Waiting for job status notification... InstallSoftware
12/3/2013 10:07:20 AM 1568 (0x0620)
Waiting for job status notification... InstallSoftware
12/3/2013 10:07:50 AM 1568 (0x0620)
Waiting for job status notification... InstallSoftware
12/3/2013 10:08:20 AM 1568 (0x0620)
Waiting for job status notification... InstallSoftware
12/3/2013 10:08:50 AM 1568 (0x0620)
CompleteExecution received InstallSoftware
12/3/2013 10:09:00 AM 3320 (0x0CF8)
CompleteExecution processed InstallSoftware
12/3/2013 10:09:00 AM 3320 (0x0CF8)
Received job completion notification from Execution Manager
InstallSoftware 12/3/2013 10:09:00 AM
1568 (0x0620)
Installation completed with exit code 0x80070001
InstallSoftware 12/3/2013 10:09:00 AM
1568 (0x0620)
Installation failed with error (0x80070001)
InstallSoftware 12/3/2013 10:09:00 AM
1568 (0x0620)
Setting TSEnv variable 'SMSTSInstallSoftwareJobID_WCD002D2_WC120008_Silent install'=''
InstallSoftware 12/3/2013 10:09:00 AM
1568 (0x0620)
GetExecRequestMgrInterface successful InstallSoftware
12/3/2013 10:09:00 AM 1568 (0x0620)
Releasing job request, jobID='{8B4082A9-9477-4D1F-9DEC-6A3F19EC3F6F}'
InstallSoftware 12/3/2013 10:09:00 AM
1568 (0x0620)
Releasing of Job Request successful InstallSoftware
12/3/2013 10:09:00 AM 1568 (0x0620)
CompleteJob successful InstallSoftware
12/3/2013 10:09:00 AM 1568 (0x0620)
Entering ReleaseSource() for D:\_SMSTaskSequence\Packages\WCD002D2
InstallSoftware 12/3/2013 10:09:00 AM
1568 (0x0620)
reference count 1 for the source D:\_SMSTaskSequence\Packages\WCD002D2 before releasing
InstallSoftware 12/3/2013 10:09:00 AM
1568 (0x0620)
Released the resolved source D:\_SMSTaskSequence\Packages\WCD002D2
InstallSoftware 12/3/2013 10:09:00 AM
1568 (0x0620)
pInstall->Install(sPackageID, sProgramName), HRESULT=80070001 (e:\nts_sccm_release\sms\client\osdeployment\installsoftware\main.cpp,361)
InstallSoftware 12/3/2013 10:09:00 AM
1568 (0x0620)
Install Software failed, hr=0x80070001 InstallSoftware
12/3/2013 10:09:00 AM 1568 (0x0620)
Process completed with exit code 2147942401
TSManager 12/3/2013 10:09:00 AM
3372 (0x0D2C)
TSManager 12/3/2013 10:09:00 AM
3372 (0x0D2C)
Failed to run the action: HP Server Pack for ProLiant 2013.02.
Incorrect function. (Error: 80070001; Source: Windows)
TSManager 12/3/2013 10:09:00 AM
3372 (0x0D2C)
MP server http://MP_server.company.com. Ports 80,443. CRL=false.
TSManager 12/3/2013 10:09:00 AM
3372 (0x0D2C)
Setting authenticator TSManager
12/3/2013 10:09:00 AM 3372 (0x0D2C)
Set authenticator in transport TSManager
12/3/2013 10:09:00 AM 3372 (0x0D2C)
Sending StatusMessage TSManager
12/3/2013 10:09:00 AM 3372 (0x0D2C)
Setting message signatures. TSManager
12/3/2013 10:09:00 AM 3372 (0x0D2C)
Setting the authenticator. TSManager
12/3/2013 10:09:00 AM 3372 (0x0D2C)
CLibSMSMessageWinHttpTransport::Send: URL: MP_server.company.com:80 CCM_POST /ccm_system/request
TSManager 12/3/2013 10:09:00 AM
3372 (0x0D2C)
Request was succesful. TSManager
12/3/2013 10:09:00 AM 3372 (0x0D2C)
Set a global environment variable _SMSTSLastActionRetCode=-2147024895
TSManager 12/3/2013 10:09:00 AM
3372 (0x0D2C)
Set a global environment variable _SMSTSLastActionSucceeded=false
TSManager 12/3/2013 10:09:00 AM
3372 (0x0D2C)
Clear local default environment TSManager
12/3/2013 10:09:00 AM 3372 (0x0D2C)
Let the parent group (System Management Install) decides whether to continue execution
TSManager 12/3/2013 10:09:00 AM
3372 (0x0D2C)
The execution of the group (System Management Install) has failed and the execution has been aborted. An action failed.
Operation aborted (Error: 80004004; Source: Windows)
TSManager 12/3/2013 10:09:00 AM
3372 (0x0D2C)
Failed to run the last action: HP Server Pack for ProLiant 2013.02. Execution of task sequence failed.
Incorrect function. (Error: 80070001; Source: Windows)
TSManager 12/3/2013 10:09:00 AM
3372 (0x0D2C)

Hello Guys!
HP ProLiant Support Pack / Service Pack uses different Exit Codes, due to that this software support other operating systems than Windows. Therefore HP has standardized to use other Exit Codes, which Windows Detect as failures.
HPSum Exit Codes:
ExitCode 1 = "Installation Successful"
ExitCode 2 = "Installation Successful, but a reboot is required"
ExitCode 3 = "Installation was canceled, or no components were updated"
EcitCode 9009 = "Installation did not complete. Check the path and make sure that the Installation exists at the specified location"
HP recommends to use following Batch File to workaround this issue for SCCM:
=======================START_BatchFile=============================
:Init
@Echo Off
Cls
:Main
Echo HP Proliant Service Pack Setup
Echo Source : %~dp0
Echo ===============================================================================
Echo Installing the HP Proliant Service Pack Setup
Echo Command: "%~dp0hpsum.exe" /use_latest /target:%COMPUTERNAME% /force /Use_WMI /s
"%~dp0hpsum.exe" /use_latest /target:%COMPUTERNAME% /force /Use_WMI /s
:CheckForErrors
Echo HP Proliant Service Pack Stauts:
If "%errorlevel%"=="0" (
     Echo *******************************************************************************
Echo                            INSTALLATION FAILED!
Echo *******************************************************************************
exit 1
If "%errorlevel%"=="1" (
     Echo Installation Successful!
     exit 0
If "%errorlevel%"=="2" (
     Echo Installation Successful, but a reboot is required.
     exit 3010
If "%errorlevel%"=="3" (
     Echo Installation was canceled, or no components were updated
     exit 0
If "%errorlevel%"=="9009" (
     Echo Installation did not complete. Check the path and make sure that the
Echo Installation exists at the specified location:
Echo Path: %~dp0
Exit 1
:End
Echo An unknown status code was returned from the PSP.
Echo This status code is [%errorlevel%]. This will be treated as a success,
Echo but please check the installation to make sure it completedly properly!
Exit 0
=======================STOP_BatchFile=============================
God Luck!
Best Regards Anders Horgen

Service pack for BO enterprice XI 3.1

Dear Friends,
we are using evalution veriosn of BOE XI 3.1 with 90 days key. i installed BOE XI 3.1 now i want to
update it on highest level of Service Pack can you please tell me how can i obtain latest service pack for
BOE XI 3.1 while we are not customer of BO. We are customer of SAP but when i try to download BO SP.
Its give me error that you are not authorized.
Any help will be higlly Appricated.
Regards
Malik

Try to open an OSS ticket about this and request access to the patches.
Regards,
Stratos

Service Pack for Primavera Contractor v4.1

Hello,
Is there any way to get a service pack for Primavera Contractor v.4.1? I have a computer that we had to replace that had the software downloaded on it which crashed. I want to put the software on the replacement computer with the available license. Please let me know.
Thank you!
Bryce

Primavera Project Management P6 version 7.0 (P6 v7) Service Pack 3 [ID 1275307.1]
You can try the below link but you will still need to sign into Oracle Support with a valid CSI #.
https://updates.oracle.com/Orion/Services/download/p10622440_7000_Generic.zip?aru=13296827&patch_file=p10622440_7000_Generic.zip

Service Pack for iTunes problems?

Does anyone know more about the $49 service pack Apple supposedly has for fixing iTunes 5+ install problems? Is it specific to iTunes, or is it an overall service pack for all known software issues? I am quite confused now by all of the fixes floating around in this discussion (although grateful for the fine assistance of various people) because I can't afford to lose any more functionality on my PC than I already have.
If a service pack does exist, shouldn't Apple provide this for free?
Too bad there isn't a computer products safety commission (like the Consumer Products Safety Commission). If there were, Apple would have to do a recall of this defective product that has harmed a lot of PCs.

Apple is not selling any sort of "service pack". Any charge you may get is for providing the technical support itself (support calls are not free unless you have a Mac that's either less than 90 days old or is under AppleCare), not for providing any patches. iTunes 5.01 has been released and is the only "patch" that I know of for iTunes 5, so if you're having problems with iTunes 5.0, try 5.01.

Service Pack for WLS 5.1

Hi all,
Does any of you know which was the latest Service Pack for Weblogic Server 5.10? AFAIK, it was SP12, but I can't find information about it or if there was any other service pack for this oldie (I know I shouldn't be using it, but that's my customer's call)
Appreciate any help / pointers you might give me.
Regards

Hi all,
Does any of you know which was the latest Service Pack for Weblogic Server 5.10? AFAIK, it was SP12, but I can't find information about it or if there was any other service pack for this oldie (I know I shouldn't be using it, but that's my customer's call)
Appreciate any help / pointers you might give me.
Regards

Service packs for wls6.0

How come each service pack for WLS 6.0 requires a download of the whole applications
instead of a patch?

To only get patch or service packs, you should login to websupport.
(http://www.bea.com/support/web.shtml)
Only entitled customers are eligible to receive service packs. Or else you have to
download the whole
bungle which 60 + SP's.
Anne wrote:
How come each service pack for WLS 6.0 requires a download of the whole applications
instead of a patch?

How to find Service Pack for R3 System...

Hi
Its very easy to find Service Pack for BI system.
But once i try to do for R3 System , i find lot of software components like:
SAP_ABA
SAP_BASIS
PI_BASIS
ST-PI
SAP_BS_FND
SAP_BW
WEBCUIF
SAP_AP
SAP_HRCRU
SAP_HRCPT
SAP_HRCPH
SAP_HRCNZ
SAP_HRCNO
SAP_HRCNL
SAP_HRCMY
SAP_HRCMX
and many more... so i m confused which software component i should choose to find exact software component.
Thanks...

Hi,
Log onto your system. From any screen, select System > Status. In the block labelled "SAP system data", hit the magnfying glass. Although there are many objects that can be updated, the most critical is "SAP Basis". Under the column "level" you can see the highest rev you have installed.
Hope it helps.
Thanks and Regards,
MuraliManohar.

Service packs for Weblogic 6.1 with J2EE 1.3 disabled

We are planning to migrate to Weblogic 6.1 from 5.1.
Is BEA supporting 6.1 release with J2EE 1.3 disabled? I see that 6.1
with J2EE 1.3 is at sp4, whereas there is no service pack for 6.1 with
J2EE 1.3 disabled.
If BEA is not supporting 6.1 release with J2EE 1.3 disabled, then we
have to go to 6.1 with J2EE 1.3.

Rakesh Kalra wrote:
We are planning to migrate to Weblogic 6.1 from 5.1.
Is BEA supporting 6.1 release with J2EE 1.3 disabled? I see that 6.1
with J2EE 1.3 is at sp4, whereas there is no service pack for 6.1 with
J2EE 1.3 disabled.
If BEA is not supporting 6.1 release with J2EE 1.3 disabled, then we
have to go to 6.1 with J2EE 1.3.Why is 1.3 a problem for you? In any case, there must be a way to do what you want.
Looking at the Service Packs, the last couple sentences of the description discuss it.
Maybe you would just need help with the WLS Start scripts. Or you would need to start
with a base product that has 1.3 disabled and take it from there. I'm sure someone
could find the files for you, they are just not out in the open.
Best Wishes,
Wayne Scott
http://commerce.bea.com/SoftwareProductDetailWLS?SWName=WebLogic+Server+Service+Pack&SWVersion=Version+6.1&SWPlatform=Service+Pack+2+for+UNIX
Evaluation Product Details
Service Pack 2 for WebLogic Server 6.1 (UNIX platforms)
File Size
47,543,493 Bytes
Description
This service pack contains files that resolve some issues pertaining to the released
product. A detailed list of these issues is provided in the release notes.
The Service Pack upgrade installers for WebLogic Server 6.1 will update all existing
WebLogic installations to run with J2EE 1.3 features enabled when starting the server
with the startscripts provided within the WLS distribution. With J2EE 1.3 features
enabled, WebLogic Server will still inform you whenever an application is deployed that
uses J2EE 1.3 features. If you desire to disable J2EE 1.3 features and you had
originally installed WebLogic Server 6.1 with J2EE 1.3 feature disabled, you can restore
the WebLogic Start scripts from the backups created during the Service Pack
installation. Go to "Viewing and Recovering Files Replaced or Deleted by a Service Pack
Installation" on our Installing BEA WebLogic Server Page.

Service pack for WebLogic 6.1

Here I can find service pack for WebLogic 6.1, Win2K?
Thank you,
Jacob Nikom

Jacob,
If you need just the service pack for WLS 6.1 , you will need to have a
websupport login and password. Please refer to this url for more
information on this.
http://contact.bea.com/bea/www/BEACustRegLogin.jsp
http://websupport.bea.com/custsupp/
Hope this helps
Raj Alagumalai
[email protected] wrote:
http://commerce.beasys.com/downloads/weblogic_server.jsp
"jacob nikom" <[email protected]> wrote in message
news:3bb8c8c7$[email protected]..
Here I can find service pack for WebLogic 6.1, Win2K?
Thank you,
Jacob Nikom

Performing Exchange Server patching & service pack for mailbox server without losing some data during the rollback ?

People,
I'd like to know how can I safely apply the Exchange Server service pack or cumulative update to the Mailbox Server role (no DAG) without losing some email during the downtime and rolling back the snapshot ?
Can I do the following:
1. Stop all of the Exchange Server services.
2. Disconnect the vNIC in Mailbox server
3. Take VM snapshot
4. Apply the Exchange Server service Pack / Cumulative Update or Windows Update
5. Reboot
6. Reconnect the vNIC, if the server back online again with no issue, commit / delete the snapshot, if not, then disconnect the vNIC followed by roll back.
would that be make sense or supported from both Vmware and Microsoft http://www.vmware.com/files/pdf/exchange-2010-on-vmware-support-and-licensing-guide.pdf ?
If yu have any other suggestion, please let me know here.
Thanks in advance.

Hey AlbertWT,
I'll start off by saying that I wouldn't do it. Microsoft is explicit that snapshots are not supported with Exchange when virtualized. See below (from Exchange 2013 virtualization: Exchange 2013 Help):
Some hypervisors include features for taking snapshots of virtual machines. Virtual machine snapshots capture the state of a virtual machine while it's running. This feature enables you to take multiple snapshots of a virtual machine and then revert the virtual machine to any of the previous states by applying a snapshot to the virtual machine. However, virtual machine snapshots aren't application aware, and using them can have unintended and unexpected consequences for a server application that maintains state data, such as Exchange. As a result, making virtual machine snapshots of an Exchange guest virtual machine isn't supported.
Even if we ignore the support statement on snapshots this is still not a good idea. Here are some things to consider.
1) Cumulative updates for Exchange make changes to the Active Directory Schema. Rolling back the snapshot on the Mailbox server will not roll back the changes to AD, which could cause functional and supportability issues. See this link to give you an idea of how there are AD schema updates in every Exchange CU and service pack: Exchange 2013 Active Directory schema changes: Exchange 2013 Help
2) It is possible for email to come in during the time that you're testing the update, and if you need to roll back you would need a plan to get that email back. Third party services could work, or you could prevent email from coming into your environment completely during that time, but those are not ideal solutions.
A far better solution would be to create a lab environment that is isolated from production. You could either take clones of your Exchange and AD VMs and put them into a network fenced environment, or create a lab and import your AD structure so it matches production. I think this is a far better way to test than trying to rely on snapshots in production.
Hope that helps!
Matt

Crystal Reports (VS-2005). Service Pack for Windows 2008 Server

I had issues with reduced font size on Export and Printing. On a PC with Windows XP SP2 installed, I made registry changes as recommended in this post:
[Font size decreases when exporting to PDF (Crystal Reports)|http://mdn.morovia.com/kb/Font-size-decreases-exporting-PDF-Crystal-Reports-10053.html]
Prior to making registry changes, I also installed Crystal Reports SP1 for VS-2005. After this, everything seems to be working fine.
But I still have this Reduced Font Size issue on my Server with Windows 2008 R2 Enterprise installed.
I installed the same Service Pack and made the registry changes, but the changes don't seem to appear. It is still showing Reduced Fonts on Export and Printing. My server is also running Visual Studio 2005.

I concur with Bhushan;
It may or may not work with windows server 2008 .
One idea;
Use [Process Monitor|http://technet.microsoft.com/en-ca/sysinternals/bb896645.aspx]. Look at the procmon logs and see if the registry key is being looked at \ accessed by the report engine.
Other than that, upgrade to a version of CR that supports the OS is your only option.
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup
Got Enhancement ideas? Try the [SAP Idea Place|https://ideas.sap.com/community/products_and_solutions/crystalreports]

Service Pack for BOXIR2

Hi,
I am trying to download Business Objects Service pack from SAP site.We have Business Objects XIR2 Service pack1.I want to download a latest service pack from the SAP site.Can someone help me which version of service pack is the latest one.We are doing testing on BOXIR2 SP1 in Windows environment.If I install a new service pack will there any problem(will anything replaces old files with the new files) for the current BOXIR2 dev environment.
This is the Service Pack(BusinessObjects XI Release 2 - SP4 Win incremental build) I am planning to download.I doubt if there are any other parts for this Service pack.Can someone help me?
Thanks,
Cheers,
Uday.

Hello Uday,
please find all latest [downloads for BOE|https://websmp210.sap-ag.de/bosap-downloads] here
[Installing the BusinessObjects XI Release 2 SP2 Patch|https://smpdl.sap-ag.de/~sapidp/012002523100006251862008E/boxir2_sp2_mnt_ugrd_instr.pdf]
[BusinessObjects XI Release 2 SP 2 - Readme|https://smpdl.sap-ag.de/~sapidp/012002523100006251872008E/boxir2_sp2_readme.pdf]
[BusinessObjects XI Release 2 for Windows - SP 2 (Part 1)|https://smpdl.sap-ag.de/~sapidb/012002523100007579752008E/boxir2win_sp2_part1.exe]
[BusinessObjects XI Release 2 for Windows - SP 2 (Part 2)|https://smpdl.sap-ag.de/~sapidb/012002523100007770212008E/boxir2win_sp2_part2.rar]
[Getting Started with BO XI R2 SP 2 / Productivity Pack|https://smpdl.sap-ag.de/~sapidp/012002523100006253062008E/xir2pp_getstarted_en.pdf]
[BusinessObjects XI Release 2 - SP4 Win incremental build|https://smpdl.sap-ag.de/~sapidp/012002523100006255222008E/boxir2_sp4_inc.exe]
[BO XI R2 - SP 3 getting started guide|https://smpdl.sap-ag.de/~sapidb/012002523100006016482008E/xir2_sp3_get_started_en.pdf]
Best regards
Falk

Service pack for Symbian Anna 025.007.239.04

G'Day,
I have an N8 Vodafail (Au) 059C7Q4
Symbian Anna 025.007.239.04
Just noticed an update - Anna service pack.
Installed it and noticed messages scroll smoother now.
Installation log did say some improvements have been made for photos too but have not yet had tome to try.
Just wonderin if anyone else out there got this too ?
Cheers.

i just got this too. apparently it's been out for 3 months.
There's no dignity in begging for kudos. Do it for the karma.

Help for installation Service pack for live cycle 8.2 ES

Hello good day I might help is what is needed for installing the SERVICE PACK to use the live cycle 8.2 ES, I want to now how is te best installation to use live cycle ES
thank you !!

If you have a maintenance and support agreement with Adobe, you will have access to the Adobe Support site where you can download updates and service packs. The update/service pack you require depends upon your specific needs and your current update/service pack level.
Steve

Service pack for 5.1

Similar Messages

Maybe you are looking for