Service stops overnight

We've installed 10G and Portal. It works well when its running. Every morning however, some service in the application is hung up, making the portal unavailable. The server has never needed restarting...only the services? ANy clues? An Oracle consultant actually did the install and config. HELP!

I'm having the same issue on my Xserve. After a week or so the windows sharing stops working. Getting into the Admin utility and stop and starting the windows sharing seems to fix it for another week or so.
Any help would be appreciated.

Similar Messages

Sql reporting services stops every 24 hours for a short time then restarts

I have noticed that recently in sccm 2012 sp1 the sql reporting services stops every morning at 7:58 am and restarts after a minute or two. The only entry in the event logs is when it stops. I don't see anything tied in with it that stops or
starts at the same time and there are no tasks or anything like that which would point to this time frame. I just thought I would throw this out there to see if anyone had any ideas. Usually with something of this nature there are some corresponding
log entries that go beyond the service stopping, but in this case there isn't. Thanks for any help you can provide.

I think I found out what was going on. I approached this from a different angle and was directed to the sql reporting services logs and found information on the reporting web server stopping. Researching that yielded the following information.
It appears that this is a result of the SSRS Web Server recycling the App Domain, which is supposed to be a pretty normal process. In fact, the configuration file for this process defaults to recycling the app domain twice daily. This lines up
with the time frame that the reporting service is stopping. It restarts it in less that two minutes and logs the recyling in the reporting services log twice daily so why I'm not seeing this entry in the event logs twice daily or even every day must
be a timing thing. I think if it takes an extra millisecond or two to recycle the app domain, it dumps an entry into the windows event logs and the sccm component status monitoring.
http://ask.sqlservercentral.com/questions/97176/reporting-web-server-stopped.html

Error message: Host process for windows services stopped

I recently had to install a new hard drive into my laptop. I am running windows vista and have installed all updated drivers. After installing itunes and uploading my backed up library, I went to play a song and I got the error "host process for windows services stopped working and was closed." Movies play fine. I have searched but have not found anything. Any help would be greatly appreciated.

Q I just upgraded to a new mobo and CPU, the EVGA X58 SLi and i7 920, and this issue still persists! That means it is either the sound card or Steam. The drivers on the CD have no issues, only the newer ones do. So by deduction there is something wrong with the new drivers, but I need them to not BSOD in OpenAL!

A135-S4527 Host Process for Windows Services stopped...

I have started getting a Windows error: Host Process for Windows Services stopped working and was closed. Laptop runs fine except my network connection says Connection Status: Unknown The service to detect this status is turned off and McAfee stopped working. Can't run any of the MS tools either. I am suspicous of conficker e but don't know how to detect or remove it. Have seen the b variant on an XP machine at work, but the tools we used on it don't work on Vista.
I am running Vista Home Edition (came on Laptop) upgraded to SP1 with auto-updates on. McAfee was also set for auto-updates and nightly full scans, active e-mail and internet scanning. No recent software downloads except for updates.
Have been having the issue since about April 28. Tried to restore but no dates exist past May 5. Tried the F8 Startup recovery no problems found. Have tried restarting services but they quickly stop again. Uninstalled McAfee and tried AVG. It allowed defintion updates and I scanned all files. No viruses, trojans or malware detected.
Any suggestions? I have a tasklstserv file I can copy and paste if it will help.

That's a bad-sector event. At a command prompt (cmd.exe), run chkdsk /r.
Event ID 7 Source Disk
But it doesn't seem likely that's the cause of the message. When you get another one, note the time and check the Application and System logs for entries at that exact time.
Thanks for the detailed information.
What virus protection do you use?
-Jerry

The visual Studio Test controller service on local computer started and then stopped. Some services stop automatically if they are not in use by other services or programs

We are using VS2013 Premium. i have installed vs2013 Test controller in my dev environment. While i am configuring (https://msdn.microsoft.com/en-us/library/hh546459.aspx) getting error message in
the Configuration summary dialog box displaying following error's : 1. Failed to Configure TFS Team Project Collection, 2. Could not complete operation as the time out expired. ''
I have checked the "visual Studio Test controller " in the
Services --> Administrative. Its automatically stopped the service. When i started the manually its showing message like as 'The visual Studio Test controller
service on local computer started and then stopped. Some services stop automatically if they are not in use by other services or programs'
Please guide me how to resolve this problem.
Thanks in Advance...

Hi Divakar,
What’s the version of your TFS?
How do you configure the test control?
Please make sure you are specify the team collection instead of team project.
On the other hand, you may enable test controller logs. (You could share the log file on the OneDrive)
# How to enable test controller logs
http://blogs.msdn.com/b/aseemb/archive/2009/11/28/how-to-enable-test-controller-logs.aspx
Regards
Starain
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

HTTP SERVICE STOPS FOR NO REASON AND NO ERRORS IN LOGS WIN2K

The HTTP service stops for no reason and we have to stop and restart to unlock and web server runs again. It appears to be related to number of concurrent users but we cannot tie it down to and specfics except on our NT 4.0 system the service never stops and runs fine . We are running versions R1 patch 4 and have gone up to 5 and 7 . We are running against an 9i database and using forms and reports. We are not using the forms server in patch 4 just the HTTP service. This is a big problem and would like an answer if possiable.

Please post your question in the appropriate product forum(s):
Database
http://forums.oracle.com/forums/index.jsp?cat=18
AppServer
http://forums.oracle.com/forums/index.jsp?cat=13
Forms
Forms
Reports
Reports

Data services stop working after updating to new OS version for Q10

I am from Qatar, after i updated my device ( Q10 SNQ100-3 ) to new OS ( 10.2.1.537 ), the mobile data services stopped working, but it works everytime I connect to wifi. This is the same with Z10. Please need help.

Hi and Welcome to the Community!
With a strong carrier network signal (e.g., not merely WiFi), I suggest the following steps, in order, even if they seem redundant to what you have already tried (step 1 should result in a message coming to your BB...please wait for that before proceeding to the next step):
1) Register HRT
KB00510 How to register a BlackBerry smartphone with the wireless network
Please wait for one "registration" message to arrive
2) Reboot
Pre-BB10 Devices ONLY. With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes.
BB10 Devices. Hold the top button down until the counter reaches zero. Wait for the device to be fully shut down (e.g., nothing at all displayed on the screen, no LED lights, etc.). Hold the top button until the red LED is lit. Wait through the full boot-up process. IF this fails, you can attempt the battery-pull method above, but it is normally NOT recommended unless nothing else works.
See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
Hopefully that will get things going again for you! If not, then you should contact your mobile service provider for formal support.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Access Connections main service stops randomly

Hi all,
I have a T60 at work with the latest version of Access Connections. Over the last few weeks, my Access Connections will randomly show that it disconnects in my system tray. However, I am still connected to my company's network. Our tech group came out and said that they are seeing instances of the Access Connection Main service just stopping randomly. When I go into Services, I can verify that it has stopped. This happens anywhere from 20-60 mins after logging onto our network. It also only happens when I am docked to my docking station, not when I am wireless. If I have a tech remote into my machine and restart the service, it starts up just fine again.
Any thoughts as to what might be causing the service to stop like this? It doesn't present a problem if I stay docked...but if I undock and try to go wireless, it doesn't do the auto switching because it's frozen...so I always have to reboot.

Hi,
in this situation make following:
- go to services and open Properties of both AC Services and in the Recovery tab set all 3 options to "Restart the Service"
- In case this should not change the situation, then go to "Log On" tab and select "This account" and insert your name and password.
In this situation would be also good to check the Event log if there is any notice, why the Service stopped working.
Any info is appreciated.
Cheers

OpsMgr Config Service stops automatically

There's a fresh installation of SCOM 2007 SP1, SQL database is configured on a separate server. The installation itself goes smoothly without any errors. After installation to RTS OpsMgr Config Service stops automatically, after restart it works for about a minute, then stops again. All the other OpsMgr services work correctly. OpsMgr Config Service and OpsMgr SDK Service are run from the same domain account with Domain Admin rights. OpsMgr Health Service is run from Local System account. Here's what I see in the logs:
p.MsoNormal, li.MsoNormal, div.MsoNormal
{margin:0cm;margin-bottom:.0001pt;font-size:11.0pt;font-family:'Calibri','sans-serif';}
a:link, span.MsoHyperlink
{color:blue;text-decoration:underline;text-underline:single;}
a:visited, span.MsoHyperlinkFollowed
{color:purple;text-decoration:underline;text-underline:single;}
.MsoChpDefault
{font-size:10.0pt;}
@page Section1
{size:612.0pt 792.0pt;margin:2.0cm 42.5pt 2.0cm 3.0cm;}
div.Section1
{page:Section1;}
Application:
Event Type:       Information
Event Source:   OpsMgr Config Service
Event Category:               None
Event ID:             29000
Date:                    11/1/2008
Time:                    3:22:33 PM
User:                    N/A
Computer:         SS-MSK-A0005
Description:
The description for Event ID ( 29000 ) in Source ( OpsMgr Config Service ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: .
Event Type:       Error
Event Source:   .NET Runtime 2.0 Error Reporting
Event Category:               None
Event ID:             5000
Date:                    11/1/2008
Time:                    3:22:50 PM
User:                    N/A
Computer:         SS-MSK-A0005
Description:
EventType clr20r3, P1 microsoft.mom.configservicehost, P2 6.0.4900.0, P3 47b70fb4, P4 system, P5 2.0.0.0, P6 4889de7a, P7 382a, P8 127, P9 system.argumentexception, P10 NIL.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 63 00 6c 00 72 00 32 00   c.l.r.2.
0008: 30 00 72 00 33 00 2c 00   0.r.3.,.
0010: 20 00 6d 00 69 00 63 00    .m.i.c.
0018: 72 00 6f 00 73 00 6f 00   r.o.s.o.
0020: 66 00 74 00 2e 00 6d 00   f.t...m.
0028: 6f 00 6d 00 2e 00 63 00   o.m...c.
0030: 6f 00 6e 00 66 00 69 00   o.n.f.i.
0038: 67 00 73 00 65 00 72 00   g.s.e.r.
0040: 76 00 69 00 63 00 65 00   v.i.c.e.
0048: 68 00 6f 00 73 00 74 00   h.o.s.t.
0050: 2c 00 20 00 36 00 2e 00   ,. .6...
0058: 30 00 2e 00 34 00 39 00   0...4.9.
0060: 30 00 30 00 2e 00 30 00   0.0...0.
0068: 2c 00 20 00 34 00 37 00   ,. .4.7.
0070: 62 00 37 00 30 00 66 00   b.7.0.f.
0078: 62 00 34 00 2c 00 20 00   b.4.,. .
0080: 73 00 79 00 73 00 74 00   s.y.s.t.
0088: 65 00 6d 00 2c 00 20 00   e.m.,. .
0090: 32 00 2e 00 30 00 2e 00   2...0...
0098: 30 00 2e 00 30 00 2c 00   0...0.,.
00a0: 20 00 34 00 38 00 38 00    .4.8.8.
00a8: 39 00 64 00 65 00 37 00   9.d.e.7.
00b0: 61 00 2c 00 20 00 33 00   a.,. .3.
00b8: 38 00 32 00 61 00 2c 00   8.2.a.,.
00c0: 20 00 31 00 32 00 37 00    .1.2.7.
00c8: 2c 00 20 00 73 00 79 00   ,. .s.y.
00d0: 73 00 74 00 65 00 6d 00   s.t.e.m.
00d8: 2e 00 61 00 72 00 67 00   ..a.r.g.
00e0: 75 00 6d 00 65 00 6e 00   u.m.e.n.
00e8: 74 00 65 00 78 00 63 00   t.e.x.c.
00f0: 65 00 70 00 74 00 69 00   e.p.t.i.
00f8: 6f 00 6e 00 20 00 4e 00   o.n. .N.
0100: 49 00 4c 00 0d 00 0a 00   I.L.....
Operations Manager:
Event Type:       Information
Event Source:   OpsMgr Connector
Event Category:               None
Event ID:             21023
Date:                    11/1/2008
Time:                    3:31:10 PM
User:                    N/A
Computer:         SS-MSK-A0005
Description:
OpsMgr has no configuration for management group Euroset and is requesting new configuration from the Configuration Service.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
System:
Event Type:       Error
Event Source:   Service Control Manager
Event Category:               None
Event ID:             7034
Date:                    11/1/2008
Time:                    3:44:10 PM
User:                    N/A
Computer:         SS-MSK-A0005
Description:
The OpsMgr Config Service service terminated unexpectedly. It has done this 16 time(s).
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
What can the problem be here?

Hi,
Since here is the forum for Exchange, we may only be expert on Exchange Monitoring by SCOM related issue. For issue on error event from SCOM 2007,we recommend you to use Newsgroup for Operation Managers 2007 to get relevant help.
http://technet.microsoft.com/en-us/opsmgr/bb839593.aspx?lc=1033
However, base on my experience, the below steps may helpful to you.
1.    First please try to check whether Local System has been used as action account.You can follow the article below to change account to “Local System”.
How to Change the SDK and Config Service Accounts in Operations Manager 2007
http://technet.microsoft.com/en-us/library/cc540429.aspx
2.    Then please Check Remove sub keys from
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Eventlog\Application that refer to OpsMgr Config Service.
3.    Please remove OpsMgr Config Service from “Sources” located at
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Eventlog\Application.
4.    After that please add OpsMgr Config Service to “Sources” at
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Eventlog\Operations Manager.
More related information share with you:
Account Information for Operations Manager 2007
http://technet.microsoft.com/en-us/library/bb735419.aspx
Hope it helps.
Xiu

Dfs R Service Stopping before backup on Domain Controllers

HI,
I have a weird issue where the DFS replication service is stopping when a DC backup starts.
Setup: Forest with 5 child domains. Only one of the domains is having a problem. this domain has DCs in the US and UK. all four DCs experience the same issue. All DC’s are Server 2008 r2. DFS
R is used for AD replication.
Issue: DFS replication service stops when a backup starts.
The DFS Replication service is stopping communication with partner P1USDC01 for replication group Domain System Volume due to an error. The service will retry the connection periodically.
Additional Information:
Error: 9036 (Paused for backup or restore)
About 30 minutes later when the backup completed, DFS replication resumes.
As mentioned this happens to all 4 domain controllers in the domains, but no other domains are affected. AD replication stops during this time.
Every time this happens the AD DB is rebuilt.
lsass (548) A database location change was detected from 'D:\Active Directory\Windows\NTDS\DB\ntds.dit' to '\\?\GLOBALROOT\Device\HarddiskVolumeShadowCopy168\Active Directory\Windows\NTDS\DB\ntds.dit'.
I thinks this is more due to the VSS provider than an issue with the DB.
Some ‘Googling/Binging’ shows that that error can be ignored as it resumes after. But im not so sure. Why are my other domains not effected. They use the same backup procedure,
same hardware, same OS, same patch revision (always 3 months behind current release).
Any suggestions would be great!

You can ignore it as long as it restarts. You can also create a scheduled task that will check the service and start it if it is not running.
I would recommend starting by installing latest Windows Updates (Especially those ones: http://support.microsoft.com/kb/968429) and make sure that your backup solution is up-to-date too.
If none helped then I would recommend contacting your backup solution developers technical support for assistance.
This posting is provided AS IS with no warranties or guarantees , and confers no rights.
Ahmed MALEK
My Website Link
My Linkedin Profile
My MVP Profile

SQL Reporting Services stops on my SharePoint 2007 Moss environment?

Hi,
I have SharePoint 2007 Moss SP3 installed on my VMWare server. I have a separate database VMWare server. I have SQL Server Reporting Services configured. Every other day the SQL Reporting Service stops, it seems to time out and logs a 7031 windows event.
I've had to create a scheduled task to restart this service every day at 4am. The OWSTIMER process consumes around 50% CPU. Any solutions for the above?
Thanks.

Hi AspNet-Scotland,
The application pool for Central Admin might be timing out, increasing the shutdown time limit for the process model from the default of 90 seconds to something longer (300 seconds) should resolve it if the cause is time-outs.
This post explains how to change the Shutdown Time limit:
http://www.sharepointpapa.com/blog/_layouts/15/start.aspx#/Lists/Posts/Post.aspx?ID=20
scroll down about half way on the post, or search for High level steps,
Cheers,
Stacy Anothersharepointblog.blogspot.com

Services stop at restart, router restart or randomly

On 10.7.2 Server DHCP, DNS, Netboot, Web and Open Directory services stop (as seen in Server Admin/Server.app) and are unable to be restarted. If I try to restart them I don't get an error message, but the indicator resolutely remains grey (instead of green).
I can make this problem happen by:
restarting the server
restarting the switch/router that runs the whole school
It also happens pseudo randomly.
To fix the problem I need to:
Unplug the main router and our internet ADSL box
Shut down the Server
Cuss.
Plug the main router/switch in
Plug in the internet box
Wait for a minute or so
Turn on the server
This is far, far less than ideal. I'm happy to grab error messages from console if that helps - but give me an indication for what service you'd like it from.
Perhaps you can tell me if this is a conflict somewhere - a bug, or something I can fix. It's driving me crazy.
Cheers,
Glen.

Hi Fabrizio,
why do you want to reboot your server every sunday?????
If you reboot your SAP this often, you'll have performance problems every Monday. All
of your SAP internal Buffers must be filled again after an reboot. If your DB is on the
same Host, also your DB Buffer is empty.
If this is an productive System, i highly recommend you that you not reboot your SAP System this often....
(By side, thats the difference between an *nix and an Windows System.).
What is the reason for doing that?
confused
Regards Manuel

When starting the AMDS it just says "the apple mobile device service on local computer started then stopped. Some services stop automatically if they are not in use by other services or programs."... help?

when trying to fix the ipod syncing/recognition by starting the AMD (apple mobile device) in admin tools section on my computer it came up with the message in the question aboce (the apple mobile device service on local computer started then stopped. Some services stop automatically if they are not in use by other services or programs.)
i have restarted my comp etc and reinstalled itunes... recurrent issue.
note - i wiped my ipod before this issue occurred, does this affect the problem?

I would start with
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
or
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
Next see the the other actions of the following concerning the AMD
iOS: Device not recognized in iTunes for Windows

SOME SERVICES STOP AUTOMATICALLY IF THEY ARE NOT IN USE BY OTHER SERVICES OR PROGRAMS

I currently install a software that needs to have a services run in order to for the license to be detected.When i run the services manually i got this error message
'THE UBSLAN_LDR SERVICE ON LOCAL COMPUTER STARTED AND THEN STOPPED.SOME SERVICES STOP AUTOMATICALLY IF THEY ARE NOT IN USE BY OTHER SERVICES OR PROGRAMS'
What can cause this and solution please

Hi kuados ,
Thanks for posting here.
After reading your posting I understand that when you establish USBLAN_LDR service on windows server 2008, system prompt an error message.
According the information what you provided right now, it’s hard to determine what cause this issue, you may like to post more information about your environment
(Event log ,Other System prompting etc… ).
Please check if it worked with assign a Local System account instead of Local Service account to run this service.
Open service MMC snap-in.
Right UBSLAN_LDR service , and click “properties”.
Click “Log on” tab , and assign a local account for running this services.
Seems this issue related to a third party software, I suggest to consult software vendor for future troubleshooting.
Please understand that I don't mean to bounce you between different solution provider as I am fully aware how time consuming this can be. However, they really are
in a better position to be able to assist you with this issue as they may have experienced similar issues.
Thanks for your understanding.
Tiger Li
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

CFMX windows services stopping

Hi,
Has anyone else run into the situation where the CFMX 7
ColdFusion services are stopping randomly?
Set-up - Server 2000, CFMX 7, IIS 5
On checking the windows services i'm finding that the
services are failing which require a restart, this holds up for a
while then the services stops again. On restarting i'm then
sometimes receiving the 'service specific error 2', strangely
enough not all the time though, i did set the services to auto
restart on failure, this however does not seem to start the stopped
service, is there a set order they should be starting in? If there
is a service dependency can be set, any ideas?
This has also been coupled with a license key error in the
logs saying the server may be out of compliance, we have checked
all our license keys they are all valid, bit stumped on that one.
Any ideas & help greatly appreciated...

That's a fairly generic error message - have you dug through
the JRun (runtime) logs, and/or the system event logs?
Some links that may help:
ColdFusion MX: Service startup fails with service-specific
error 2 following a service shutdown or restart
http://www.adobe.com/go/tn_18903
ColdFusion MX 6.1: Service startup fails with
service-specific error 2 following a system reboot
http://www.bpurcell.org/blog/index.cfm?mode=entry&entry=854

Service stops overnight

Similar Messages

Maybe you are looking for