"Servlet pluto is not available" error page after deploying portlet
I want to build a JSF portlet with JSC 2.1. I am playing with the tool a little bit and I am experiencing this error after running the project:
HTTP Status 404 - Servlet pluto is not available
type Status report
message Servlet pluto is not available
description The requested resource (Servlet pluto is not available) is not available.
Sun-Java-System/Application-ServerIt's strange because it happened when I changed something in the code of the SessionBean1.java. Since then, I can't even run properly a blank JSF portlet project that I created afterwards.
I created a new project, added nothing and pressed Run Project. It seems, that the deployment was OK:
portlet-container-deploy:
Adding portlet to portlet container...
Deploying portlet container...
jsCreatorDist:
run-deploy:
In-place deployment at D:\Work\Creator\Portlet3\build\web
Start registering the project's server resources
Finished registering server resources
deployment started : 0%
Deployment of application Portlet3 completed successfully
Enable of Portlet3in target server completed successfully
run-display-browser:
Browsing: http://localhost:29080/pluto/portal/Portlet3
run:
BUILD SUCCESSFUL (total time: 12 seconds)"Servlet pluto is not available" page again...
My configuration: Windows XP SP2, Sun Creator 2.1 with no updates + bundled AS
No, I haven't figured it yet. And it seems that nobody ever had.
JSCreator is buggy. If it weren't for free, I would have never use it. It has so many issues, you will see so many exceptions and experience so many annoyances... And of course, it is very hungry for resources. I am sure that a lot of people will disagree, but that's my opinion. I've been using Eclipse for 4 years now.
However here are some tips (Windows only):
Delete directory .Creator from Documents and Settings.
Uninstall creator, install creator. Don't install it to Program Files, install it to C:\Sun or smth like that, the space character can do some mess.
Again, put your project somewhere, so the path would not contain spaces.
Sometimes just restarting the server helps. I've had to reinstall Creator three times yet.
Similar Messages
-
Portlet not available error when customizing Omni Portlet
Hi,
I've created a webcenter page with a omni portlet on it. Configuring this portlet for the first time is OK. However customizing this same portlet later on will always give me the portlet unavailable error, together with this stacktrace.
SEVERE: oracle.adf.model.portlet.binding.PortletBindingException: Portletmodus 5 kan niet worden ingesteld voor portletbinding OmniPortlet1_1., Please check the privileges before executing this operation
at oracle.adfinternal.view.faces.renderkit.html.portlet.ADFPortletServlet.process(ADFPortletServlet.java:473)
at oracle.adfinternal.view.faces.renderkit.html.portlet.ADFPortletServlet.process(ADFPortletServlet.java:343)
at oracle.adfinternal.view.faces.renderkit.html.portlet.ADFPortletServlet.doGet(ADFPortletServlet.java:315)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:743)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:64)
at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:162)
at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:15)
at oracle.security.jazn.oc4j.JAZNFilter$1.run(JAZNFilter.java:396)
at java.security.AccessController.doPrivileged(Native Method)
at javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
at oracle.security.jazn.oc4j.JAZNFilter.doFilter(JAZNFilter.java:410)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:620)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:369)
at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:865)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:447)
at com.evermind.server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:215)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:117)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:110)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:595)
Adding adf security does not help.
Any suggestions are greatly appreciated. Note that I have the same problem with different portlets, so it has nothing to do with this specific OMNI portlet I guess.
Jaco VerheulThe timing... :) having the same issue. Is there any resolution to this or should I also open an SR to get the patch/fix?
Also, to help others searching for this error...
Portlet unavailable when trying to click customize for an OmniPortlet.
Portlet unavailable
<!--Unable to set portlet mode 5 for portlet binding OmniPortlet5_1, Please check the privileges before executing this operation-->
<!--oracle.adf.model.portlet.binding.PortletBindingException: Unable to set portlet mode 5 for portlet binding OmniPortlet5_1, Please check the privileges before executing this operation
at ...
-->
Steve
Message was edited by:
ssaxer -
System Landscape directory not available error,
I am still a beginner, and I am having some slight trouble understanding, what tools would be needed, and how to install. I am using the forums.
We have the MII Discovery Server up and running.
NWDS Server installation is done.
We have the MII track ready to be used for Development(SLD URL is available) , Userid and password available
I am working on installing the NWDS 7.3 Developer Workspace.
Would I also need to do NWDS Server install on my laptop?
Would these steps be sufficient?
1. Download and install JDK 1.6
2. Copy the file nwds-extsoa-7.3-SP00-PAT0000-win32.zip from:
<your download location>\51039309\DATA_UNITS\JAVA_IDE\distros\com.sap.netweaver.developerstudio.distribution.complete.extsoa\8.30.0.101020102100
to a convenient folder.
3. Extract the content and you will have a folder with name eclipse.
4. Launch the Netweaver Developer Studio from folder eclipse, you may want to create a shortcut on the Desktop.
5. If you haven't maintained JAVA_HOME property or if it's pointing to some other java version, eclipse will complain about it. In the dialog window locate the JDK 1.6 installation. Path to JDK 1.6 should be something like
C:\Program Files\Java\jdk1.6.0_25\bin
6. Restart the NWDS after this and select a suitable workspace.
7. Set the run time engine in NWDS, by going through the menu path:
Window->Preferences->SAP AS JAVA
Question:
1. I am unable to Set the run time engine in NWDS, please could you give me details steps with what I would need to enter for Instance Hostname and Instance Number...etc
2. As part of Development installation do I have to Modifying the Logon Page? Do I have to go thru the Server installation in order to start developing on eclipse environment?
I do not have the war file. How do i Copy the war file tcsecumelogonui.war from
<Installation drive>:\usr\sap\<SID>\J00\j2ee\cluster\apps\sap.com\com.sap.security.core.logon\servlet_jsp\logon_ui_resources\tcsecumelogonui.war
3. System Landscape directory not available error,
In the Component Browser when I right click and select New u2013 Development Configuration u2013 Import From System Landscape Directory (SLD) u2013 Next (Enter UserID and Password)
Thank youHello,
For the SLD error, please, configure SLD following as per this docuemtnation:
http://help.sap.com/saphelp_nw04/helpdata/EN/bb/c2b6421a75da11e10000000a155106/frameset.htm
Regarding the settings to enter NWDS to connect to AS Java, you have to enter the java instance data so that NWDS can connect to it in order to make deployments, etc....
Please, see also the following documentation that explains stp by step how to work with NWDS.
http://help.sap.com/saphelp_nw04/helpdata/en/fe/a3996fa314f94f8a0c3475b08636d0/frameset.htm
I hope this helps you.
Regards,
Blanca -
O1034 Oracle not available error
Right, I'm running on a Windows Xp platform, I've installed ok and it runs ok. I have manually altered the password of user HR from within sqlplus, and everything is fine.The problem comes when I switch off and switch back on, I am unable to start the database.
Running sqlplus system/password gives me ORA-01034 Oracle not available and ORA-27101: Shared memory realm does not exist.
I have tried running stobdb.bat and startdb.bat which both run ok, but I still get the oracle not available error when going into sqlplus. It seems that the PC does not install the oracle set up on booting perhaps? I also cannot access the "Go to database home page", from my web browser, but I'm not sure if it is necessary to access that home page?We are seeing this a little bit, and not sure what is causing it at this stage. Starting the database manually seems to help, or at least points to the root cause problems.
The steps to start the database manually are posted at Re: ORA-01033 after starting and trying to connect. and also posted below
To shutdown manually go to the SQL Command Line (as the OS user that installed Oracle).
At the SQL Prompt SQL> issue
connect / as sysdba
For example
SQL> connect / as sysdba
Connected.
Then type
shutdown immediate;
You should see the following
SQL> shutdown immediate;
Database closed.
Database dismounted.
ORACLE instance shut down.
Then type
startup
You should see the following
SQL> startup
ORACLE instance started.
Total System Global Area 599785472 bytes
Fixed Size 1249348 bytes
Variable Size 192942012 bytes
Database Buffers 402653184 bytes
Redo Buffers 2940928 bytes
Database mounted.
Database opened.
Just to be sure, also try a select
select count(*) from hr.employees;
You should see
SQL> select count(*) from hr.employees;
COUNT(*)
107
Any problems or errors reported with any of these steps, please let us know. -
503 Service not available error while testing web service in SOAMANAGER
Hi guys,
We have created a web service in ABAP and want to test it in soamanager.
When trying to test it using the "Open Web Service navigator for selected binding" link in web service administration page we get the error page--
503 Service not available
Error: -6
Version: 7000
Component: J2EE Server
Date/Time: Thu Jul 30 10:40:50 2009
Module: http_j2ee.c
Line: 820
Server: cmphr_HRC_10
Error Tag:
Detail: Cannot reach external Application Server on localhost:51000
we have enabled the wsdl service in SICF and also the APP SOA MANAGER service.
Can anyone please help.
Thanks in advance.
Regards
PrinceHi,
Detail: Cannot reach external Application Server on localhost:51000
51000 is the port when the j2ee engine runs. As you dont have java stack am afraid this would not work.
Regards,
Vamshi. -
Hi Gurus,
I made some changes in rz10 for client copy like:
icm/host_name_full [email protected]
login/accept_sso2_ticket 1
login/create_sso2_ticket 2
icm/server_port_1
PROT=HTTPS,PORT=443$$,PROCTIMEOUT=600,TIMEOUT=600
icm/server_port_0
PROT=HTTP,PORT=80$$,PROCTIMEOUT=600,TIMEOUT=600
login/no_automatic_user_sapstar 0
After to make changes effective, i stopsap & startsap.
But unfortunately db is not coming up. I checked startdb.log it showing
error as " ASE instance not available
*** ERROR:ASE instance possibly left running when system
went down(system crash?).
Notify Database Administrator."
Please help us to resolve this issue, i have also added startdb.log for
your reference.
Regards,
PiyushHi Piyush,
Did you solved this issue.
We are facing the same issue and only this thread is there in SCN for this issue.
If you solved this issue,Kindly share the solution.
Thanks and Regards,
Mathan A -
RPC Server not Available error when using Windows Fax & Scan under Windows 7
RPC Server not Available error when using Windows Fax & Scan under Windows 7
Hi,
On current situation, please remove the old fax account and re-add a new fax account in Windows Fax and Scan, then check if this issue sill exist. For more details, please refer to following similar thread and artilces.
RPC Server not Available error when using Windows Fax & Scan
under Windows
The local fax account is inaccessible after you rename a Windows Vista-based computer
Cannot send fax from Windows Vista/Windows 7 PC with “RPC Server not Available” error message
Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please
make sure that you completely understand the risk before retrieving any suggestions from the above link.
If any update, please feel free to let me know.
Best regards,
Justin Gu
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
I got a early 2008 MAC PRO with additional wireless keyboard and mighty mouse few weeks ago.
Recently I keep encountering the "bluetooth not available" problem after software update (system reboot) if I have USB devices attached to the MAC PRO. Also, if I connect the Logitech quickcam ultravision directly to the MAC PRO, the bluetooth will have "not available" error after system reboot. If I connect the quickcam to the USB HUB, the problem won't happen.
This error happened again when I install the new Safari update while I have the keyspan USB-to-Serial connected to the MAC PRO.
I have all the latest updates installed in my MAC PRO. I don't know what happened, but I hope this problem can be fixed so that I don't have to keep unplugged all my USB equipment if I need to reboot my MAC PRO.Hi there,
I just had the exact same thing happen! I had my usb 2 flash stick and MyBook 320HD only. I then noticed that the MyBook wouldn't sleep even though the Mac was shut down. I had to force shut off the drive by removing the power lead. I restarted the Mac with no usb whatsoever and voila! All is now ok.. I wonder if this is connected with the motherboard power management?? -
"connection not available error code - 4161" what...
Hi
I have been trying to upload my workouts to Nokia traker but when I start the application I get the following "connection not available error code - 4161" What does this mean and how do I sort it
ThanksI did a comparison, and your connection string is different
than mine. Mine does not show any password/userid entries, but
perhaps that's the difference between using SQL and SQL Express.
(I'm using SQL.) I am, of course, assuming that you have actual
values for "servername," "database," etc.
Given that you can't get in from RSC Explorer, it would seem
that either you are not using the same userid/password as the one
you set up for the administrator when you created the DB, or else
there's something wrong with the DB itself.
Try creating a test DB. Be careful to specify the same
administrator name and password as the login you use to get on the
RSC server. After you've created the test DB, open it up from RSC
Explorer. If you can do this successfully, then everything ought to
be working OK. From that point, I'd start over and create a new DB,
and upload to that one. (In fact, I've actually gone through
exactly that total exercise before.
G -
Direction Not Available Error -ios6
Maps are not working on my iphone4 after ios6 upgrade I am getting "Direction Not Available" error even though it is able to search the place if I just give search. I was using maps successfully with ios5. Please let me know what is the solution.
I am also facing the same prob..in UAE. is there any solution?
-
Cron service not available error
A production issue appeared today at one of our customer
sites.... and I am unable to login to CFadmin. I stop and restart
the services, but still the same issue appears. See below.
Anyone have any thoughts? Ideas? Has anyone ever seen this
before??
Error Occurred While Processing Request
The Cron service is not available.
This exception is usually caused by service startup failure.
Please check your server configuration.
The error occurred in Application.cfm: line 78
-1 : Unable to display error's location in a CFML template.
Please try the following:
Check the ColdFusion documentation to verify that you are
using the correct syntax.
Search the Knowledge Base to find a solution to your problem.
Browser Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.2;
SV1; .NET CLR 1.1.4322)
Remote Address 127.0.0.1
Referrer
Date/Time 25-Apr-06 12:57 PM
Stack Trace (click to expand)
at
cfApplication2ecfm105811000.runPage(C:\blackstone_final\cfusion\wwwroot\CFIDE\administrat or\Application.cfm:78)
coldfusion.server.ServiceFactory$ServiceNotAvailableException:
The Cron service is not available.
at
coldfusion.server.ServiceFactory.getCronService(ServiceFactory.java:118)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native
Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown
Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown
Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at
coldfusion.runtime.java.JavaProxy.invoke(JavaProxy.java:74)
at coldfusion.runtime.CfJspPage._invoke(CfJspPage.java:1627)
at
cfApplication2ecfm105811000.runPage(C:\blackstone_final\cfusion\wwwroot\CFIDE\administrat or\Application.cfm:78)
at coldfusion.runtime.CfJspPage.invoke(CfJspPage.java:152)
at
coldfusion.tagext.lang.IncludeTag.doStartTag(IncludeTag.java:343)
at
coldfusion.filter.CfincludeFilter.invoke(CfincludeFilter.java:65)
at
coldfusion.filter.CfincludeFilter.include(CfincludeFilter.java:33)
at
coldfusion.filter.ApplicationFilter.invoke(ApplicationFilter.java:157)
at
coldfusion.filter.RequestMonitorFilter.invoke(RequestMonitorFilter.java:51)
at coldfusion.filter.PathFilter.invoke(PathFilter.java:86)
at
coldfusion.filter.ExceptionFilter.invoke(ExceptionFilter.java:50)
at
coldfusion.filter.BrowserDebugFilter.invoke(BrowserDebugFilter.java:52)
at
coldfusion.filter.ClientScopePersistenceFilter.invoke(ClientScopePersistenceFilter.java:2 8)
at
coldfusion.filter.BrowserFilter.invoke(BrowserFilter.java:38)
at
coldfusion.filter.GlobalsFilter.invoke(GlobalsFilter.java:38)
at
coldfusion.filter.DatasourceFilter.invoke(DatasourceFilter.java:22)
at coldfusion.CfmServlet.service(CfmServlet.java:105)
at
coldfusion.bootstrap.BootstrapServlet.service(BootstrapServlet.java:78)
at
jrun.servlet.ServletInvoker.invoke(ServletInvoker.java:91)
at
jrun.servlet.JRunInvokerChain.invokeNext(JRunInvokerChain.java:42)
at
jrun.servlet.JRunRequestDispatcher.invoke(JRunRequestDispatcher.java:257)
at
jrun.servlet.ServletEngineService.dispatch(ServletEngineService.java:527)
at
jrun.servlet.jrpp.JRunProxyService.invokeRunnable(JRunProxyService.java:204)
at
jrunx.scheduler.ThreadPool$DownstreamMetrics.invokeRunnable(ThreadPool.java:349)
at
jrunx.scheduler.ThreadPool$ThreadThrottle.invokeRunnable(ThreadPool.java:457)
at
jrunx.scheduler.ThreadPool$UpstreamMetrics.invokeRunnable(ThreadPool.java:295)
at jrunx.scheduler.WorkerThread.run(WorkerThread.java:66)I'm receiving the exact same error as the original post. We tried every suggestion on this forum and still get the 'cron service not available' error. I've also checked and we don't have a neo-cron.xml file. We are using Coldfusion 8.
The Cron service is not available.
This exception is usually caused by service startup failure. Check your server configuration.
The error occurred in Application.cfm: line 84
Called from Application.cfm: line 4
Called from Application.cfm: line 1
-1: Unable to display error's location in a CFML template.
Any help will be appreciated. Thanks.
Crystal -
DMS BP giving 'requested resource is not available' error
Hello, smart KM people
I'm having a problem with our DMS business package in our EP6 SP16 portal. I configured the DMS repository manager successfully.. and the Document Explorer workset is functional and I'm able to navigate through the folder structure and see the documents listed that are located in the DMS. However, the problem comes in when I click on one of the documents to view it. When I click on the document, I get a "404 - The requested resource is not available" error.
What would be the cause of this? Permissions seem to be set correctly... I'm able to navigate through the folder structure and see the list of documents. If I access the DMS through SAPGUI, I'm able to view the documents without a problem. Has anyone had this problem in the past, or have any hints about what configuration to troubleshoot?
Thanks in advance for the help!
Cheers,
FallonHello Samta -
I followed your steps and am still receiving the same error, so it must not be a problem with the logon ticket. And when I went to the Component Monitor, the DMS Repository Manager looked just fine.
Julian, here's the stack trace I found when viewing the source of the 404 error:
com.sapportals.wcm.protocol.webdav.server.WDServletException: resource not available
at com.sapportals.wcm.protocol.webdav.server.WDGetHandler.setContentLocation(WDGetHandler.java:756)
at com.sapportals.wcm.protocol.webdav.server.WDGetHandler.internalHandle(WDGetHandler.java:495)
at com.sapportals.wcm.protocol.webdav.server.WDGetHandler.handle(WDGetHandler.java:253)
at com.sapportals.wcm.protocol.webdav.server.WDServlet.doGet(WDServlet.java:777)
at com.sapportals.wcm.protocol.webdav.server.WDServlet.service(WDServlet.java:458)
at javax.servlet.http.HttpServlet.service(HttpServlet.java(Compiled Code))
at com.sapportals.wcm.portal.proxy.PCProxyServlet.service(PCProxyServlet.java:331)
at javax.servlet.http.HttpServlet.service(HttpServlet.java(Compiled Code))
at com.sapportals.portal.prt.core.broker.ServletComponentItem$ServletWrapperComponent.doContent(ServletComponentItem.java:110)
at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209)
at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114)
at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java(Compiled Code))
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java(Compiled Code))
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java(Compiled Code))
at com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:215)
at com.sapportals.portal.prt.pom.PortalNode.service(PortalNode.java:646)
at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java(Compiled Code))
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java(Compiled Code))
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java(Compiled Code))
at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:753)
at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:240)
at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:545)
at java.security.AccessController.doPrivileged1(Native Method)
at java.security.AccessController.doPrivileged(AccessController.java(Compiled Code))
at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:405)
at javax.servlet.http.HttpServlet.service(HttpServlet.java(Compiled Code))
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java(Compiled Code))
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java(Compiled Code))
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java(Inlined Compiled Code))
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java(Compiled Code))
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java(Compiled Code))
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java(Compiled Code))
at com.sap.engine.services.httpserver.server.Client.handle(Client.java(Inlined Compiled Code))
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java(Compiled Code))
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java(Compiled Code))
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java(Compiled Code))
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java(Compiled Code))
at java.security.AccessController.doPrivileged1(Native Method)
at java.security.AccessController.doPrivileged(AccessController.java(Compiled Code))
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java(Compiled Code))
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java(Compiled Code))
Any hints from this? We keep running up against brick walls with this problem.
Thanks for your help! -
Servlet action is not available
Hi All,
I am very new to the forum,I am trying to execute a simple struts program.I am calling a .java file which is in test package and callling success.jsp page.I am getting Servlet action is not available.I am calling as http://localhost:8080/trails/test/sample.do.
Thanks,
lokatry a struts forum as it sounds like a configuration issue
-
SOLVED - Servlet MessageBrokerServlet is not available on Ubuntu AMD64
Hello,
I have downloaded blazeds-bin-3.3.0.11688.zip and deployed blazeds.war on winXP tomcat 6.20.
There http://localhost:8080/blazeds/messagebroker/amf url in browser gives me blank screen as expected.
My production deployment will be Kubuntu 9.10 AMD 64 so I wanted to test same on it.
The installation for same is Kubuntu 9.10, tomcat 6.20 installed through repositories.
I deployed same .war in catalina/localhost but I get following error
Servlet MessageBrokerServlet is not available
instead of blankscreen as expected.
What might be wrong ?
Edited ------- 16 Nov 2009 22:08 (IST +5:30 GMT)
The Tomcat Log is As Follows. Hope Somebody will be able to decode this
16 Nov, 2009 10:05:39 PM org.apache.catalina.core.ApplicationContext log
INFO: SessionListener: contextDestroyed()
16 Nov, 2009 10:05:39 PM org.apache.catalina.core.ApplicationContext log
INFO: ContextListener: contextDestroyed()
16 Nov, 2009 10:05:47 PM org.apache.catalina.core.ApplicationContext log
INFO: ContextListener: contextInitialized()
16 Nov, 2009 10:05:47 PM org.apache.catalina.core.ApplicationContext log
INFO: SessionListener: contextInitialized()
16 Nov, 2009 10:05:47 PM org.apache.catalina.core.ApplicationContext log
INFO: Marking servlet MessageBrokerServlet as unavailable
16 Nov, 2009 10:05:47 PM org.apache.catalina.core.StandardContext loadOnStartup
SEVERE: Servlet /blazeds threw load() exception
javax.servlet.UnavailableException
at flex.messaging.MessageBrokerServlet.init(MessageBrokerServlet.java:170)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.apache.catalina.security.SecurityUtil$1.run(SecurityUtil.java:269)
at java.security.AccessController.doPrivileged(Native Method)
at javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
at org.apache.catalina.security.SecurityUtil.execute(SecurityUtil.java:301)
at org.apache.catalina.security.SecurityUtil.doAsPrivilege(SecurityUtil.java:162)
at org.apache.catalina.security.SecurityUtil.doAsPrivilege(SecurityUtil.java:115)
at org.apache.catalina.core.StandardWrapper.loadServlet(StandardWrapper.java:1167)
at org.apache.catalina.core.StandardWrapper.load(StandardWrapper.java:993)
at org.apache.catalina.core.StandardContext.loadOnStartup(StandardContext.java:4149)
at org.apache.catalina.core.StandardContext.start(StandardContext.java:4458)
at org.apache.catalina.core.ContainerBase.addChildInternal(ContainerBase.java:791)
at org.apache.catalina.core.ContainerBase.access$000(ContainerBase.java:123)
at org.apache.catalina.core.ContainerBase$PrivilegedAddChild.run(ContainerBase.java:145)
at java.security.AccessController.doPrivileged(Native Method)
at org.apache.catalina.core.ContainerBase.addChild(ContainerBase.java:769)
at org.apache.catalina.core.StandardHost.addChild(StandardHost.java:526)
at org.apache.catalina.startup.HostConfig.deployDescriptor(HostConfig.java:630)
at org.apache.catalina.startup.HostConfig.deployDescriptors(HostConfig.java:556)
at org.apache.catalina.startup.HostConfig.deployApps(HostConfig.java:491)
at org.apache.catalina.startup.HostConfig.start(HostConfig.java:1206)
at org.apache.catalina.startup.HostConfig.lifecycleEvent(HostConfig.java:314)
at org.apache.catalina.util.LifecycleSupport.fireLifecycleEvent(LifecycleSupport.java:119)
at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1053)
at org.apache.catalina.core.StandardHost.start(StandardHost.java:722)
at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1045)
at org.apache.catalina.core.StandardEngine.start(StandardEngine.java:443)
at org.apache.catalina.core.StandardService.start(StandardService.java:516)
at org.apache.catalina.core.StandardServer.start(StandardServer.java:710)
at org.apache.catalina.startup.Catalina.start(Catalina.java:583)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.apache.catalina.startup.Bootstrap.start(Bootstrap.java:288)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.apache.commons.daemon.support.DaemonLoader.start(DaemonLoader.java:177)
Edited -------
Thanks and best regards.
Raja
Edited on 18 Nov 2009 13:50 IST (+5:30 GMT)
There is No Problem with either BlazeDS, Tomcat or Kubuntu OS as such.
The repository Install of Tomcat has the problem. What I did is as follows.
1. First I removed the repository Install of all Tomcat packages.
2. Downloaded the stable tar.gz distribution from Apache website.
3. Followed Instructions at this Link (states that repository Install of tomcat do not work properly.)
4. deployed the blazeds war on linux
5. Started Tomcat and tested http://localhost:8080/blazeds/messagebroker/amf
It gave me blank screen as expected.
Hope this helps to someone who stumbles on Ubuntu Linux Blazeds Installation.
Moderators may put this in FAQ section so that it helps Ubuntu Users.
Thanks and best Regards
RajaIt's not that hard to fix/work around, you just need to add a line in /etc/default/tomcat6, I just made a post about it.
http://eveliten.se/node/1
//Snigelkott -
HTTP Status 404 - Servlet PapiWebServiceServlet is not available
When I click on the http://localhost:8686/papiws/PapiWebServiceEndpoint?wsdl link in papi web service console the following error message comes:
HTTP Status 404 - Servlet PapiWebServiceServlet is not available
type Status report
message Servlet PapiWebServiceServlet is not available
description The requested resource (Servlet PapiWebServiceServlet is not available) is not available.
Apache Tomcat/5.5.15
I am using Standalone 10.3.2. Build #100143.
How to resolve this issue? Should I use some other version? From where to download it?
ThanksAre you getting following log snap in ur Servlet Engine log of Standalone admin center....??
RUNTIME:PAPI Web Services Context Listener initialized.
RUNTIME:********* PAPI Web Services (Version 10.3.1.0.0 Service Pack 1 Build #94375) is starting *********
RUNTIME:Checking Java Runtime Enviroment ...Ok
RUNTIME:Initializing enviroment...Ok
RUNTIME:Initializing PAPI services ...
RUNTIME:processDocumentationPath = \S:\OraBPMEnterpriseHomeNew\bin\..\tomcat\webapps\..\..\webapps\papiws\processDocumentation\
RUNTIME:defaultWorkingDirPath = S:\OraBPMEnterpriseHomeNew\bin\..\tomcat\webapps\..\..\webapps\papiws\WEB-INF\
RUNTIME:Creating ProcessService...
RUNTIME:ProcessService created successfully.
RUNTIME:Starting Updater with frequency = '10000'.
RUNTIME:Updater started successfully.
RUNTIME:Ok
RUNTIME:********* PAPI Web Services was initialized successfully *******
if not you may generate the war and deploy it manually...
To generate the war go Config-->PAPI WS tab-->generate war(Bottom link)
hope this help...
Rgds,
Biltu
Maybe you are looking for
-
Files and apps not opening by 2x click in Finder window?
Folks: No situation on my older G4 iBook running 10.4.11: I can't get files or applications to open or launch from a finder window by clicking on them; they do open by highlighting and then command + o. And any apps I have in the Dock launch by singl
-
Unable modprobe ndiswrapper on 2.6.12.5 kernel
Greetings everyone, As my username implies, long time slackware user. Got bored one day and installed Arch and am very impressed. One small problem. I have using a 2.6.12.5 kernel with a custom .config file that has reiser4 support patched in. I ha
-
I am not able to add video files to my itunes after installing itunes 10.7
I am not able to add video files to my itunes after installing itunes 10.7.0.21
-
I received this error: Error: 1 (Miscellaneous error) 16: Invalid Control Standard Identifier Error: 2 (Field level error) SegmentID: ISA Position in TS: 1 Data Element ID: ISA11 Position in Segment: 11 Data Value: ^ 7: Invalid code value. The sequen
-
Hi All, I've saved a 2.2.2 guest into a template, imported that into 3.0.2 and created a guest using it. VM starts up fine but can't remember the password for root (this was a once off where we changed the root password so a vendor could access it as