Set default screen size

when FFX launches it defaults to a screen size smaller then I'd like for default. Is there a way to change this?
I run it on an external 24" screen of an MBA running 10.7.5

Hello metropical,
Thank you for contacting Mozilla Support. That does sound frustrating. After doing some searching on our support site I've found that if you EXIT Firefox, the window will return to the same position it was in at the START of the last session. If you CLOSE Firefox it will save the position it was in at the END of the last session.
Please let us know if this solves your problem.
Cheers,
Patrick

Similar Messages

  • How do I set the screen size of my site?

    Hey guys making a site for a friend and I'm not sure on how I go about setting a screen size that can be viewed on varying screen sizes like 1280x800 and up. At the moment on my 1920x1080 display it looks fine but when I open it on her MacBook Pro (1280x800) it is cut of by half and my website has some fixed anchors which I do not allow scrolling so you are kind of stuck.
    Thanks to anyone that can help, can't find a tutorial anywhere

    In the normal state the screen on an iPad will rotate depending on which side is up. Any of the four sides can be up or on top and the display will look correct. But if you want to lock the display in one orientation you can. Swipe up from the bottom of the screen to reveal the Control Center. Then tap on the Orientation Lock icon. That's the icon of the small padlock surrounded by a circular arrow. That icon will appear at the top right of the display and the screen will no longer rotate. Repeat the same procedure to unlock orientation.

  • How to set the screen size with nested Iview screen

    Can someone show me how to set the screen size with nested IView  screen.
    at the moment i only try it with trial and error untill it looks somewhat close. Is there a property in VC to set the size for Height and width.
    The same question is for the form. the form elements inside the form is easy but the actual form is still a challenge.

    Hi,
    Yes you are correct ,Still the Form and iview are not able to change thier Layout Structure using a Propery.
    it is available with VC7.1
    Govindu

  • Personas: How set the default screen size when Personas starts up

    Hi Personas experts,
    When Personas starts, its screen size is by default small, say, size_A. One can press "+" to increase the screen size, say, size_B.
    Now I want Personas to start with a bigger screen size, say, size_B instead of the default size, size_A. Does anyone know how to do this? Thanks.
    Br,
    Dong

    Hi Dong,
    There is a minor tweak you have to do in your index.html file. Or I advise you copy the index.html file into a new file and run personas using it.
    The tweak in the 40th line where you have the script. Just add          switchPersonasObjectFullScreen();
      <script type="text/javascript">
             setPersonasObjectSize(1);
             switchPersonasObjectFullScreen();        <!-- Add this here -->
             trySetPersonasObjectSizeFromUrlParameters();
           disableBrowserHelp();
         </script>
         </body>
    Save . Activate and Run Personas using this file. It will open personas in Full Screen Mode within the browser window.
    I hope this tweak helps.
    Regards,
    Manu

  • How do I set default font size?

    Some programs (most importantly for me, Thunderbird) use a default font size that is too small for my eye comfort. Some (such as Firefox) allow me to change the font size, but Thunderbird does not (though there is a menu item to change font size, which does not work).
    I gather that such programs are using a default system font size. So I would like to change this. Some Help articles suggested that I could do this from the Font Panel, but they give no indication where to find the Font Panel. I cannot find it in System Preferences or via the Spotlight.
    I am using OS X 10.4.7
    I am computer-literate, but new to the Mac, having had this computer for about a week and a half.
    P.S. In Thunderbird -> Preferences -> Fonts there is an option to configure the fonts used by Thunderbird. The settings affect messages, but not the main window with the message list. However, at this point I'd really like to set the system default so all programs that use the system default will be affected.
    Thanks.
    Daniel

    This still does not work.
    I tried all of them.
    Theme Font & Size Changer
    Big Buttons
    Default FullZoom Level
    NoSquint.
    It only works for that page of that web site, as soon as you leave you start all over again.
    Can't we just say Firefox messed up and needs to revert to the way it used to work without have to do ANYTHING to adjust any sizing.
    This is utterly ridiculous.
    It's a web browser for GOD sakes...not the OS. It shouldn't be doing anything but displaying web sites with NO INTERVENTION by the user for each and every page.
    Why are programers always looking for ways to take a working product and make it useless???

  • [AA7+] [Windows] Set default text size for "auto" setting...

    Good morning:
    I was wondering if it is possible to set the default font size or specify a maximum font size
    for the auto setting of the font size on a text field when using the auto setting?
    Currently, if the font size is set to "auto" it defaults to 12 pt. text if multiline is checked on the Options tab.
    If multiline is not checked on the Options tab, the font size will adjust to the height of the box.
    I would like to have the multiline checked, specify "auto" for the font size, but have the auto font size be no larger than 8 pts.
    It can go smaller than 8 pts. if there is too much text in the field, but should not be larger than 8 pts. because the other form fields are in 8 pt.
    If someone has any suggestions on how to achieve this, I would be most appreciative.
    Thanks!
    Theresa

    Thanks Jongware!
    I'm aware of the many different forums and I thought I was posting it in the Acrobat Scripting forum.
    That'll teach me to look where I post. I guess I'm the one that needs the glasses.
    Take care!
    Theresa

  • Default screen size 17 macbook pro

    how do I reset screen size to default size tried all sorts and does not seem to look right

    Open System Preferences and select the "Displays" Panel:
    Then choose the resolution that looks the best:
    Top open Sytem Preferences use the menu item "Apple >  System Preferences..."

  • Setting default font size in Safari

    Hi. I like to set my font size in Safari to one level below the default. I usually do this everytime I open up a Safari window and hit Command+Minus or go to View > make text smaller. Anyway, I was wondering if there was a way I could set this to default so I did not have to do it everytime I launched Safari?

    mrurmil --
    You can go into the main Safari Menu, (upper left of top Menu)
    Go to Preferences>Advanced
    and then lower the size font designated in
    "Never use font sizes smaller than _"
    Mine's set to 9 which is pretty small,
    but I like it better. I believe it was set to 11 or 12 natively.
    Hope this helps.

  • Setting 1280x1024 Screen size in Jdeveloper 11.1.1.4 for development

    Hi All,
    I am using JDeveloper 11.1.1.4 to develop an ADF application. I want to develop UI screens for lowest screen resolution as (1280x1024). But in the JDeveloper IDE in the resolution dropdown, I can only see the following
    Full screen
    400x600
    600x800
    800x1200
    1024x768
    1280x720
    1600x1200
    1680x1050
    Problem is most of the end-user (customers) screens have maximum resolution of 1280x1024. My development PC resolution is 1600x1200. Can I can use the full screen option in JDeveloper after setting my screen resolution to 1280x1024? Will it suffice or is there a way to set JDeveloper for 1280x1024 resolution in the IDE for development purpose.
    Thanks
    Edited by: user5108636 on Feb 13, 2011 10:11 PM

    I previously developed under full screen option and my PC resolution was 1600x1200. But when the application was ran on other screens it was displaying with some page contents being cut out. It was due to other machines running on lower resoultion. I will need now redesign the pages to run on user defined lower resolution of 1280x1024. How do I setup Jdeveloper design tab to show for 1280x1024.
    Thanks
    Edited by: user5108636 on Feb 14, 2011 5:23 PM

  • How do you set a default screen size for safari windows to open at ?

    Hi guys, I'm running my mac mini through a 50 inch plasma. I really like that safari opens the browser at a size that's just big enough to fit the page you are viewing to; but annoyingly my flatmate keeps changing the window size to full screen. I don't like this and have tried to play around with the settings so that it opesn in a default size every time but have been unable to do so.
    If anyone has any suggestions it'd be greatly apreciated as this seemingly stupid problem is realllllly annoying me.
    Cheers,
    AJ

    Evict your flatmate.

  • How to set default paper size in iPhoto?

    iPhoto selects a paper size seemingly at random, and I can't find any way to set the default to letter. What am I missing here? I don't have this problem with other applications.

    Hi Frank,
    Thanks for the additional information.
    This bug was originally fixed in 9.0.4 but seems to have been broken again somehow in 9.0.5 and 10.1.2, so I have opened a new bug for it. The bug number is 4032412.
    The good news is that this bug does not exist in the 10.1.3 Developer's Preview which will be available very soon! and it also allows you to set the page orientation of the diagrams from within Tools | Preferences.
    Thanks for reporting the problem,
    Lisa Sherriff
    JDev UML QA

  • Set default screen parameters in PCH report

    Hi.. I have a requirement where i have developed a custom hr report using PCH LDB. The Reporting period on the selection screen defaults to All but i want to default it to Today.
    Please help.
    Regards,
    Riya.

    Please check if this helps
    REPORT  zytest.
    TABLES objec.
    AT SELECTION-SCREEN OUTPUT.
      CLEAR pchztr_a.
      pchztr_d = 'X'
    Ensure that the above logic is only triggered for the first time OR I recommend to go wth the solution proposed
    by Keshav. You can set the value of PCHTIMED in the INITIALIZATION event itself.
    -Rajesh.
    Edited by: Rajesh Paruchuru on Oct 5, 2010 2:25 PM
    Added recommendation

  • O/S Default Screen Size

    I have a Mac G4 1.25Ghz MDD tower with a Samsung 2232BW monitor running 1680x1050.
    I also use a KVM switch to switch between the MAC and the PC.
    If I turn on the MAC but don't have the monitor switched over to the MAC, when I do switch it the screen is set to 800x600 and I have to detect monitors for it to reset to 1680x1050.
    The PC, I can unplug the monitor totall, when I plug it back it will always load at 1680x1050 because it's set as the default.
    How can I tell the OS to always load at 1680x1050 regardless is the monitor is switched to the MAC or not?
    Thanks

    That certainly sounds inconvenient, to say the least,
    when your display settings go away when the monitor
    is no longer available to the Power Mac.
    I'm wondering if setting a profile for that display could
    help the computer remember it when it becomes avail-
    able again; or if the profile (color, etc) has no relation.
    In earlier experiences with tower Macs, the display's
    own settings held the basics; but I did not share the
    monitor with a different computer, so they stuck.
    You may have to see if a utility such as SwitchResX
    may help change the default setting to that of this
    display so it will be the one the OS sees each time.
    About SwitchResX:
    http://www.madrau.com/html/SRX/About.html
    The options this allows may be worth investigation:
    http://www.madrau.com/html/SRX/whysr.html
    Another possibility, outside of my experience,
    would be to find a way to script the settings
    so the one you want would be the default.
    In any event...
    Good luck & happy computing!

  • Setting default screen quality to "High"

    Captivate v5.5
    I am recording some screen shots from our corp. website to slides created in Captivate v5.5. I have set all the slides in Captivate with screen quality "High" yet all the slides I import after recording have screen quality "low".
    I know I can change them but wonder is there a way to set the fault screen quality to "high" so all new slides added are "high" quality - or whatever I want them to be rather than having to keep changing them.
    Noel

    Thank you Anjaneai and Lilybiri,
    So the way it works at the moment is this. When you create a project each slide you add will always be set to "low" quality and there is no way to change this in preferences or global settings.
    When you preview you work it will be based on "low" quality slides unless you change them one by one as you import them.
    Once you have finished the creation of your project and publish it, provided you have made the required changes in Project Settings - all slides that were "low" will be changed to the required quality setting as per the project settings in preferences.
    When you open the project again - to edit it for example, I assume the slide quality is still "low".
    I agree with you Lilybiri - Slide Quality should be an option in Preferences and the default settings should be "Optimised".
    Thanks again both.
    Noel

  • Default screen sizes for fuid grid & media query

    Is there a way to change the default sizes in the fluid grid dialog for new pages. I would like to start with a 320px mobile size not 480. (since there are hardly any devices that are 480 as far as I can tell. Changing the tablet size would also be useful.

    If you're talking about the preview screens in DW, click on the values and select or edit new ones.  See screenshots.
    Nancy O.

Maybe you are looking for

  • How can I save multiple emails as separate files with 1 export?

    I need to save hundreds of emails as separate files.  If I select all of the emails, then export as PDF, it doesn't save with their Subject titles, just numbers.  If I try prints, save as pdf, it consolidates them all into 1 file.  If I try to save a

  • IDE Locks up in infinite loop

    When I try to open a certain java file it locks up the IDE and spits out an infinite number of the following error messages: at oracle.javatools.editor.BasicView$LineRowMap.rebuildRowMap(BasicView.java:3286) at oracle.javatools.editor.BasicView$LineR

  • How to view HTML document through ABAP in CRM

    Hi, I have an internal table with one field type string containing html code. How can i see the output of that html document in SAP CRM using ABAP code. Is there any standard function module to display the document by passing the internal table? Plea

  • Force user to enter text if checks YES check box

    I have created a form with YES and NO check boxes.  If user checks YES, they need to provide written reason.  Is there a way to "force" user to enter text into text box if they check the YES check box? Thanks, Toyro

  • I want to remove all YAHOO files from my computer. HOW ???

    When I launch Firefox, I get a YAHOO search window , and I don't want anything to do with YAHOO -- how do I change it to Google search, like was before I installed Firefox 4 ??