Set desired in and out of audio video in menu...

Sorry - so basic but can't figure out - how do I set the in and out point for audio playing during the menu and the video that is being viewed in the menu? Thanks!

You mean using Motion eus? Look Motion Menu up in the manual for the details. It's not intutive. You select the button and then open the inspector and you will see a media tab where you can set the in point. You cannot select the outpoint since Motion Menus are 30 seconds by default. Adjusting the loop point for the entire menu is described, confusingly, in the manual.
bogiesan

Similar Messages

Video stutters when setting range in and out points within browser

While playing back video and using the "I" and "O" keys to set range in and out points, the video stutters every time I press either key.
Footage is Apple ProRes 422 1080p23.98 and 720p59.94 (problem is more noticeable with 59.94 footage). Playback quality is set to "Better Performance"
FCPX 10.1.3
OSX 10.9.5
Mac Pro (Late 2013)
3 GHz 8-Core
32GB RAM
Dual AMD FirePro D700
Project stored on 7200rpm eSata drive via GbE

Yes that's exactly right. As I'm going through selecting ranges to mark with a keyword tag, the video pauses for a split second (and skips a few frames) every time I use the "I" or "O" keys. As I tend to tag multiple sections within each clip I like to mark my ranges and tag them on the fly while the clip is still playing.

Set Composition In and Out Points

Hello
I'm sure this is simple but a new look to CS6 has thrown me!
Say I have created a composition named 'MasterComp' which comprises several layers of Footage. I now want to place frames 100 to 300 of MasterComp within a new composition named Comp01, how do I do this?
I used to simply double-click MasterComp in the Project panel and then in the preview window set the time to 100 using the timeline and click the 'In Point' button. I would repeat this to set the 'Out Point' and then drag the MasterComp from the Projects pallete into my Comp01 panel.
There appears to be no timeline in CS6 when previewing a composition along with the associated ability to set the in/out point.
Any guidance would be very helpful.
Chris

Hello Rick
Thanks for your thoughts. Perhaps I was not clear. If I remember correctly, in CS5.5 I could double-click a composition to preview it and there would be a timeline beneath it so that I could scrub up and down and set the in/out points. I have reset my Standard Workspace and there is no timeline beneath a Composition when previewed. There is, however, for a Footage item.
Composition Settings only lets me adjust the Start Frame and Duration. I don't want to make a global change to the composition, simply set an in and out point for the composition's use when placed within another composition.

IMac ichat to macbook pro ichat and vice versa: audio/video call/chat not working

Hi and thanks for your time!
no green video/phone icon appearing beside buddy name.
audio status/video status under view of the menu bar are ticked. ( i noticed this happened after i added "appleut01" AIM and did a test call. grayed out prior to said test call)
invite to video/audio chat under buddies list are grayed out even if buddy highlighted first.
also tried changing port to 443 but when I do it automatically goes back to 5190...
also, i've tried logging off/on, deleting my account and making a new one...
basically followed suggestions from various threads herein but still cant video/audi chat/call:-)
hope somebody can help^^

Hi,
Lets check a few more things.
Some things are blocked from you changing them if the Mac User Account you are using has Parental Controls turned On.
To Show Buddies with Video and Audio icons several places should be checked.
1) with iChat Open go to the View Menu. In here both Show Video Status and Show Audio Status should be ticked (Selecting it will toggle the tick On or Off)
2) In the Video Menu the Camera Enabled item and the Microphone Enabled one should also have ticks.
3) (we Looked already) The Connection Doctor should say you can Video or Audio Chat as well as whether you can 4 way Video chat and 10 Way Audio Chat.
4) In the iChat Menu > Preferences > Video Section the Bandwidth Limit should not be set too low.
At least the 500kbps setting is needed to do 4 Way Video Chats.
It can also be useful to use this setting if your Internet Connection is much faster but varies a lot.
5) Parental Controls will stop you Adding Buddies, adding new Screen Names/Accounts in the iChat Preferences, altering several things about existing Accounts/Screen Names that have been set up.
If a Buddy has a Video or Audio iCon and it is a pale green them they are Busy.
If 1) are set then you should have an Video icon next to your Own Buddy pic in the header part of the Buddy List window. (Whether it shows Audio or Video will depend on 2)
What shows in 3) will depend on the other settings and what Internet Speed and hardware you actually have.
6) IF the settings are On for the camera then we need to know if the System can "See" the camera.
Go to the Apple icon Menu top Left. Click About this Mac.
Click More info to Open the System Profiler
Use the Reveal Triangles to see the Hardware list then USB.
Does this list the Camera connected to one of the Buses ? (you may need to click the items in the panes on the right to see the info you need)
It should list the details such as serial number, Maker, Firmware (possibly) and speed.
7:19 PM Friday; July 8, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb( 10.6.8)
 Mac OS X (10.6.7),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

In and Out of focus video. Please help!!!

I exported my fce movie to a quicktime movie (which looked fine on the computer) and then imported to idvd ( which stilled looked fine on my computer) and burned it to a dvd to play on TV and then the video goes in and out of focus when the Lacrosse players move. Why does this happen??

Hi - my notes on this - might be of help
*FCE/P to iDVD*
Several things
• How to go from FCE/P to iDVD
• Free space on Start-up hard disk
• Encoding
• Brand and type of DVDs used
• Burn speed set
• iDVD BUG
• Chapters
*How to go from FCE/P to iDVD I do*
• Disable Screen and Energy saver
• IMPORTANT --> FIRST in FinalCut - Mix Down Audio under Sequence Menu / Render Only / Mixdown
• Save out as a QuickTime .mov file
• Select with Mark - Chapter Mark
• Not self-contained (not important but saves time and space)
• NO QUICKTIME CONVERSION (IMPORTANT)
*Free space on Start-up hard disk*
I set a minimum of 25GB (for Mac OS and iDVDs temp files)
Encoding
• I use Pro Quality encoding
*Brand and type of DVDs used*
• I use Verbatim
• I use DVD-R
*Burn speed set*
• I set down this to x4 (or x1)
*iDVD BUG*
• One can not go back to movie-project for any alterations and then go back to
the iDVD project. It will notice and ask You to either Up-date or Cancel. Neither
of them will work.
Medicine - Start a brand new iDVD project.
*Use of Chapters*
• I only use a to z and 0 to 9 in naming them. NO other symbol/letter !
• NO Chapter-mark at very beginning - iDVD NEEDS TO set this by it stlf
• No Chapter marks in or within two seconds from a transition
(Way around this last one - Export movie as QT full quality and NO Chapter marks
Import this into a new Movie-project and now You are free to set C-Ms where You want
them except at very beginning - still)
*Material used to build movie*
• video - I use streamingDV (or convert all other to this eg .mp4, .avi, .wmv etc)
• audio - I use .aiff 16-bit 48kHz or from Audio-CD (44.1kHz) - no .mp3 or direct from iTunes
• photos - I use .jpg - no .bmp etc
Trash iDVD pref file and run Repair Permissions - and have a re-try.
from post ??
May not be relevant, but I had the same problem with iDVD, where burned DVDs showed a green screen. It was cured by quitting Quicksilver and Quickeys as well as disabling sleep and screensaving
Yours Bengt W

Is it possible to "convert" a PPT/Presenter file to Captivate and retain the audio, video, etc.?

Hi - I'm wondering if someone has done this or can recommend the best way to do this.
We have a PPT/Presenter file that was created using PPT 2010 and Presenter 9. We recorded audio for the training right in Presenter and have also imported videos into the file using Presenter.
We need to output the file to DVD to actually play on a DVD player. We know we can do that with Captivate (we are using Captivate 5) and are wondering if there is a way to take our file (the package so to speak) and get that to open in Captivate and retain all of the pieces that we have added to it (audio, video, hyperlinks).
Or, alternatively, if there is a way to publish our Presenter file to DVD format, that would work for us too.
Thank you for any information or suggestions!
Emily

Hi Emily,
Presenter contents and captivate contents are different. but you can achieve it using the following steps in presenter.
1. Open you presentation.
2. GO to Adobe Presenter>>Publish .Publish dialog will open.
3. Check the CD package checkbox and publish the content.
4. Now Goto the publish folder and burn the content on DVD.
After successfull Burn, You can play on DVD player.
I hope this will work for you. Kindly let me know if you are facing any problem.
Thanks,
Sunil
Adobe Presenter Engg Team

Possible to Zoom in and out on a Video?

I am using Adobe Premiere Elements 4.0 on Vista.
I have a video clip of my son playing hockey, and I'd like to zoom in and out on him to show the audience where he is so they can follow him during the sequence.
Any ideas on how I can do this?
Alternatively, if someone has a suggestion on other ways to highlight him, I'd be very appreciative.

You only have so much resolution, of course, so it may get fuzzy if you zoom in too much.
But right-click on the clip on the timeline and select Show Properties. In the Properties panel, open the Motion properties and increase the Scale settings.
If you keyframe the motions, you can actually create a motion path and zoom in. My Steve's Tips articles at Muvipix.com tell you how.
http://muvipix.com/products.php?subcat_id=41

Plugin-container and Flashplugin are both generating a million reads and writes an hour... even when Firefox is minimized and running no audio/video; how can I

I am running FF 18.0.2 on a Win7 system with an i7 CPU and 8GB RAM. My Flash plugin is newly-updated. I've used Firefox on this machine its entire life (3 years).
Since 3 or 4 (?) versions ago, I've been getting massive activity on my hard drive with Firefox. When I check with Win Task Manager, I see the plugin-container.exe *32 and the FlashPlayerPlugin_11_5_502_149.exe *32 processes are generating millions of I/O reads and writes, even while Firefox is idle (minimized, running no audio or video). On this latest version, 18.0.2, the drive activity stalls out YouTube videos repeatedly, even though I can see they're buffered ahead. The playing video will stop, audio will continue to end of buffer, and then EVERYTHING stops (Firefox not responding) for 30 seconds or so. It will then pickup again and play until it repeats the same pattern in a minute or so.
Example: I closed and restarted Firefox 2 days ago. Earlier today I checked Windows Task Manager and found the two processes EACH generated about 161 million reads and 141 million writes since then! My wife's laptop is showing nothing like a hundredth of that.
The constant drive activity is slowing down all programs outside of Firefox too, as you might imagine. The PC is acting like it's a dedicated machine for Flash.

The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us!

Setting Separate In and Out Devices

Hey!
Im having trouble getting Logic Express 8 to go out of my head phone out on my computer while the input is set to my firewire interface.
I didn't have this problem in GB because it has separate in/out preferences...
Id love to tips or tricks.
Thanks!!

You need to set up an 'aggregate device.'
More info, and links to detailed step-by-step instructions are here:
http://discussions.apple.com/thread.jspa?messageID=8813763&#8813763

Lifechat lx-3000 sides click in and out distorting audio

Upon purchasing this headset, I noticed the sound was awfully different from the last pair of these headphones I previously had. The sound was much lower in the right ear than the left ear. As I lifted the headset up the audio clicked back and was fixed.
But now, if I put down the headset or lift it up to scratch an itchy ear, the audio lowers again, and the ear muff makes a click sound. It seems if I click the outside of the right ear muff in it makes the click sound again and goes back to normal audio.
It is really irritating as I have had multiple of these headsets which have broken over the years and I have never had this problem. I can't take it back to the store I purchased it at as the faith I had in it not being faulty as they never have been so
I threw out the receipt.
What do I do, what can I do to fix it. Please help, it's really irritating...

Hi,
Meanwhile, I suggest you try the headset in another PC, then test the sound effects again, we should first find out whether this is a PC issue or a headset issue, if this is a headset issue, then you can go back to the store to replace it with a new
one if it is still under guarantee.
If this is a pc issue, then please make sure to keep the latest driver for your audio device, you can manually view the manufacture website to find the driver.
We can also check the following link and see if anything\software\driver we need for the headset.
http://www.microsoft.com/hardware/en-us/downloads
Yolanda Zhu
TechNet Community Support

I have iTunes version 10.7.0.21 for Windows 7. It was working fine untill recently. Now when I play a T.V. show the audio cuts in and out, the video pauses intermittenly and also intermittenly fast forwards. What is causing this and how do I fix it?

I'm having problems with video play back in itunes 10.7.0.21 for windows 7. Video was playing fine, but now I'm having audio issues. Audio cuts in and out. Also video pauses and fast forwards. Does anyone know what would cause this all the suddenly? More importantly does anyone know how to fix this?

All sorted now. Thread can be closed!

Full screen preview blanked out in from options in audio video settings?

Hi all,
Am running FCP6 and have lost the option to preview fullscreen in the audio video settings menu. It is literally missing, as an option, though the space the option inhabited is still there. Only options I have are to preview via firewire to my CRT monitor. I have tried to refresh AV devices and all frames, but doesn't seems to help/work.
Any suggestions?
Many thanks,
-Tom

Hi David and thanks for your suggestion. I gave it a try and no luck. Its just the same. I have no options in video playback at all unless I connect my deck and then I have only the via firewire options, the deck provides. BTW, I know its the wrong forum, but I have the same blanking out situation in the output filed in MOTION.
Any more suggestions would be greatly appreciated.
Thanks,
-Tom

Setting in and out markers for capturing.

i am learning final cut pro, and have also purchased a new camera. I was under the impression that a tape based camera goes through wear on the heads the more you use it... having said that i just finished chapter eight of capturing video in final cut pro, and am under the impression that i have to watch the video, set my in and out point/ set markers to select the footage to be used, and then it has to play the footage again to capture it?..... so your camera is always going to have to go through the wear of recording original footage,rewind footage...play footage to mark in and out points, and the a third time to capture is this correct? also are a lot of people using these expensive formatting devices that you plug into your camera so when you record your original footage it records on the tape and on this device so you can access the device and not put so much wear on the camcorders tape heads?

sounds like you are very efficient in your work.
You have to be if you want to get anything done in a timely manner, and if you want to be able to find footage quickly.
I thought that i should do that after the fact, but then i thought that in cases of collecting a lot of rough footage that there may be a several areas of footage you dont want to use that you are asking the camera to play when it doesnt need to.
Exactly why logging your footage is so important. Not only do you see what you have, but you can make sure you don't capture stuff you don't want or don't need, and that saves tons of space. Plus the mere fact you are logging, capturing and organizing your footage means that you are getting more familiar with what you have. This is of MAJOR importance to an editor.
I am going to be doing this for a living
Then learning good editing habits early on is a must.
Lemme take this moment for shameless self promotion, and point out my Tutorial DVD on how to be organized in FCP:
Get Organized in FCP
(I may receive some form on compensation in posting the above link)
Start out organized and you'll find that you edit much faster and more efficiently.
Shane

Setting in-and-out points -- is this possible?

I set in-and-out points in the preview window by dragging the blue triangles.
I would like to sample various parts of a clip, though there are only 2 triangles.
1. Is there a way to take one segment of video and establish in-and-out points for maybe the first 30 seconds of video and than set another in point maybe 1 minute later with a out point 30 seconds after that. So ultimately the encoding will encode two non-sequential segments of video.
Thanks.

You can't do that, but you can achieve what you want by simply dragging in the clip multiple times into Compressor and for each clip, set your in and out point.

How can i change the setting for audio-video for my face time to built in only so i can have my skype camera ?

Good evening,
The last few days my I lost the ability on Skype to be seen by the other party ... I can see them but they cannot see me. At the same time my Face Time sent me some messages error.
When I open my Skype and go to Preference and go to audio/video I see my image ... and when I go back to make a call the camera is off (no light). When I look at the bottom where I can have a drop down arrow I have Face Time (built in).
On my other Macpro (that work well) I have at the same place built-in only.
Cannot change anything on my MacBook air ... no drop in.
Please Help and thank you !

There are no settings for video resolution or frame rate.
Regarding iOS developer policies:
https://developer.apple.com/devcenter/ios/index.action

Set desired in and out of audio video in menu...

Similar Messages

Maybe you are looking for