Set Forwarder mail between hosting company and MS online exchange

Hello,
This is Dharam from Ahmedabad, I can be contacted on 9638208855 ([email protected]).
I wants to use ms online exchange for some of users in my company. I have 10 users having mail ids with hosting company and 2 users are having exchange plan with other company by forwarding mails to particular link on 123together.com
Yesterday, i have signup for free 365 account for 1 month, as i am expected to buy only mail exchange plan for 5 users but after getting my requirements.
I have set the forwarder to mail id i am able to receive through the [email protected] on all application of mail such as on desktop, mobile, owa etc... but while i am replying to those users its using id [email protected]
which can be used by [email protected] which my domain and forwarded to online exchange services.
As my boss is having exchange plan with 123together.com i have observed that they are using forwarder and same thing but receiving and sending mail from [email protected] on all the application of mail, they didn't even asked for domain setup.
So i want to clear some my confusion before to proceed for the paid services, that can i able to serve this service for some users and some can be able to use the existing one without exchange on the hosting company by forwarding some users to online exchange.
I hope to hear more from you.
Dharam Kappadiya.
9638208855

Hi Matthew,
Thanks for the reply,
My concern is i don't want to transfer my whole domain to MS Online Exchange just wants to create Account and wants to set forwarder to my [email protected] from MS to etc... and from hosting company i have to set forwarder for [email protected]
to usera@.... whatever the id has been created.
So is it possible to do this because while setting up an account users its asking for DNS MX Record and TXT, which is for the whole domain users and i don't wants to do than.
So Please guide me before i can go somewhere else.

Similar Messages

  • How to Set Up SSO Between IBM WebSphere and SAP EP Using JAAS

    Hi
    I have read the article on SDN called "How to Set Up SSO Between IBM WebSphere and SAP EP Using JAAS", which is also the name of my posting.
    The reason why I post this is that I've tried to follow the links in the PDF to get the file WebsphereEpSsoLib.zip but I get an error 403, which tells me that the file is not there.
    Does anybody know where this file went or can somebody tell me an alternative place to get this file?
    Jacob

    Please open the associated whitepaper, and you can find the download link to the .ZIP file on page 4.
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/ibm/how to set up single sign-on between an ibm websphere portal and the sap enterprise portal using jaas.pdf
    Hope that works!
    Elise

  • I have had apple products now for apron 7 years BUT have never been able to make the bluetooth work , not even when 2 products i.e. : phone and iPod are in the same room. So i stopped trying but would like to set it up between my iMac and i

    hi can anyone help please ? i have had apple products now for apron 7 years BUT have never been able to make the bluetooth work , not even when 2 products i.e. : phone and iPod are in the same room. So i stopped trying but would like to set it up between my iMac and iphone / ipad but can't get it to work, they say discoverable but just will not connect to one another. I also tried the connection code and tried without one ... NO JOY ... Is this common or am i a twit ?

    You can't connect an iPhone or iPad to a Mac via Bluetooth, except for Internet tethering.
    You're not doing anything wrong - it just isn't a feature of iOS devices.
    What were you hoping a Bluetooth connection would allow you to do?

  • Version conflicts between host labview and RT engine

    there is problem that i cannt switch target to feild point. It said that "version conflicts between host labview and RT engine" . But my labview is version 7.0 and the real time module is version 7.0 too. Anyone can give me hand? Thanks

    Depending on your version of MAX, you should be able to change the version on the FP (in remote systems). If you can't do it in 3.0, try upgrading to 3.1 (you will have to search for it on the site). If that doesn't work, you can try resetting to factory default and then see if you can do this.
    Another tip, which for some reason seems to help, is updating the OS\Run-Time Engine when windows is in safe mode.
    Try these and see if they help.
    BTW, as a tip for next time, you're more likely to get a good answer for something like this if you post in the FieldPoint board.
    Try to take over the world!

  • Is there any character set translation facility between the database and th

    We are upgrading a character based SQLforms version 3 application to forms6i running over the web against a 9.02 database.
    Is there any character set translation facility between the database and the Forms server / web browser?
    Our database character set is NEE..P4 (North European). However, the user needs to see the data in the BLT..P13 (Baltic) character set.
    In the old application, users accessed these forms through a telnet client and this did the translation. For example :
    The database character :
    � (Unicode hex value = 00D0)
    would be translated by and displayed on the telnet client as :
    � (Unicode hex value = 0160)
    A colleague of mine has done some experimenting. By changing the NLS_LANG registry setting to BLT..P13 in his oracle home and loading the Baltic character set for his Windows 2000 environment, he has been able to achieve the same translation in SQLPLUS.
    However, we have been unable to do the same in a forms web runtime.

    Oracle automatically translates characters between the display CharacterSet and the database characterset
    The statement
    In the old application, users accessed these forms through a telnet client and this did the translation
    worries me a little because it implies that the data you have stored in the database might not actually encode the characters that you think you've put in.
    This aside you need to set you NLS_LANG parameter on the application server for the client side character set - if you are using the forms listener servlet architecture then this would be set in the default.env file.

  • Syncing Mail Between My iMac and Macbook

    I am new to the Mac world (I am a PC convert) and I now have an iMac and a Macbook for work.
    I have a couple of questions (some of which belong in this group and some elsewhere but I figured someone here could point me in the right direction):
    1. My company's email does not support IMAP, only POP. What is the best way to keep my email clients sync'ed? Ideally I would like my Inbox and all of my folders to be the same on my desktop and laptop and it would be great if it was automated somehow.
    2. What is the best way to handle my iPhone? Should I make my Macbook the "Sync Master" and only sync it to that?
    3. What is the best way to keep my folders and iTunes sync'ed between my iMac and Macbook? Someone suggested Martian Slingshot as the best way to keep them together. Do other people concur?
    Any other advice/experience that people may have on the easiest way to use a Desktop in the office and travel with a sync'ed laptop is appreciated.
    As I mentioned, I am very new to the Mac world. I can't really think of any great way to sync them in the PC World either but I am grateful for your help. I know I should have gotten a Macbook Pro but my boss didn't want to get me one so I am stuck with the hardware I have.
    Thanks.
    Jeremy

    What I've done with email in the past is set only one of the machines to delete email from the server (if your company allows you that option). But you need to make sure you check with the one that doesn't delete before the other. You may be able to delete manually as well, so don't delete anything from the server until mail has been downloaded to both (I think this can be done in Apple Mail under advanced prefs). But that won't help with tracking replies, etc. And you'll have to manage mailboxes seperately.
    .Mac has a bunch of syncing options, but you may not want to go to that expense.
    Sorry I don't have any advice on the other stuff, only running 1 Mac.

  • File transfer problem between Host OS and Guest OS

    Hi,
    I have WIndows7 32 bit as a host OS in C drive. and i have installed the Virtualbox in D drive and installed CentOS 6 in virtual box as a guest OS.
    After installing the Guest Additions in CentOS and set the Drg n Drop-Bidirectional. it permits to create shared folder in CentOS but i am not able to drag n drop to any file from host to guest and vice versa.
    Also when i plug the pendrive it copy the partially data in guest OS then it show unpluggeed automatically in guest OS. It copy only .rpm file in guest OS (CentOS)
    please suggest how to copy the file from Host OS to guest OS and vice versa.
    I have installed VirtualBox-4.3.20-96997. i have installed also Oracle_VM_VirtualBox_Extension_Pack-4.3.20-96996.vbox-extpack on windows ( on host OS).
    Thanks.

    The following is from the virtualbox user manual:
    Drag’n’Drop This setting allows to enable Drag and Drop: Select a file on the desktop, click the left mouse button, move the mouse to the VM window and release the mouse button. The file is copied from the host to the guest. This feature is currently only implemented for Linux guests and only for copying files from the host to the guest.
    I guess that explains your experience with Drag'n Drop.
    Regarding USB and the pen drive, you cannot access a USB device in the host and guest OS at the same time. The technology does not support this. You will either have to capture the device to be used/mounted in the host or guest OS. Unless you configure the USB device in the virtual machine settings, the device will normally be captured by the host OS and become inaccessible by the guest OS.
    To copy files between Windows and a VirtualBox Linux guest you can use Putty and it's pscp.exe to copy files from Windows to Linux and vise versa. You may have o enable SSH on your Linux side. There was a post here yesterday, please check the last forum discussions. Alternatively you can also use WinSCP if you want a GUI tool.

  • Syncing mail between iMac G5 and Macbook Pro

    I work at home on a G5 and regularly read and then delete or file my emails. I regularly sync between my G5 and Macbook Pro, which I use when traveling. My syncing routine works fine with the address book, calendar, etc., but when I go my Macbook Pro Mail account after syncing, the inbox is still full of mail that I have already read and filed on the G5. Is the syncing routine designed to replicate the mail accounts or do I need to reread, delete, and file the emails on the Macbook as well.
    PS: I am using email accounts with cox.net, i.e., not mac.com accounts.
    Thanks for any help.
    FLL

    The underlying issue here is that you have chosen to use POP3 rather than IMAP mail accounts. Only IMAP mailboxes are 'synchronized' by default: it is virtually impossible to synchronize POP3 mailbox content.
    For a discussion of POP3, IMAP and mail synchronization options, take a look at the Mail & Address Book - Tiger forum located here.

  • HT2500 how can I synch mail between an iMac and Macbook Air?

    I have a Macbook Air running10.7.4 and an iMac running similar.  I use Mail as local tool for my hotmail account but this means inevitably that mail is nt synched between the iMac and MBA.  I want to be able to access my mail from both computers but only do so nce.  I would love to be able to synch mail folders between the two so that I could keep my mail in order.  Only having to read/delete once would be a further benefit

    set it up as an IMAP account instead of POP. IMAP syn with server (which also means other devices using that mail sync too) where as POP doesn't modify what's on the server. most hotmail accounts setup by default as POP

  • Complants about TNT delievery company and Apple online store Hong Kong

    On 6 Aug I've ordered online a powder adapter and also a Mac software online. According to the TNT tracking system, items were collected on 9th and and was supposed to be send by 12th. But nothing has been deliveried on the 12th. I've given a company address for delievery and on Monday 16, I've noticed that TNT has been trying to deliver the items on Saturday. They have left a note. Since then, I've been trying to call them million times but like I've read about other complaints on the discussion, their lines are always busy, or no one would ever pickup. Of course I've also tried to call Apple online store and the same happened, first time I've waited 20 min and second time 30min and still can't talk to anyone to resolve the problem or try to arrange a redeliver. on 19 on the tracking system they said they tried to redeliver, but I've never recieve anything. TNT is a horrible company and I don't understand how Apple can use them!!! Now on the tracking system, seems like my items would be return to the sender. Can someone responisble from Apple explain this and resolve this situtation?? There is no e-mail that I can contact Apple online store as well, and I don't think anyone can stay on the phone all day waiting to talk to someone.... this has been the wrose online shopping experience for me!! Can some helpful user tell me what I can do?? Thank you

    Welcome to Apple Discussions
    I'm afraid there's nobody here that can assist you, these forums are users helping other users and Apple do not participate.
    Your best approach is to call your local Apple number ((852) 2112-0099) and then ask to speak with someone in Customer Relations then explain your situation to them and let them follow up for you.

  • Users not syncing between Office 365 and CRM Online 2015

    Hi,
    I added a new user (In-cloud) to Office365 yesterday. Obviously the sync between Office365 and CRM Online 2015 is not working anymore. When trying to log in to CRM it says "You are not a member of this organization". The user is Global Administrator.
    I waited for over 14  hours now, so I think waiting for the sync to start is not an option anymore.
    Also, I do not use security groups to specify users which should be synced.
    Best
    Patrick

    Did you actually give that user a CRM License?  Just adding them to Office 365 does not add them to CRM.
    The postings on this site are solely my own and do not represent or constitute Hitachi Solutions' positions, views, strategies or opinions.

  • Syncing mail between iPhone, iPad and MacBook

    When I delete an email (hotmail) form my iPhone it doesn't delete on my iPad or my MacBook. I've changed settings do that it deletes automatically from the server but I'm still having trouble working out how to delete it off all my devices when I've deleted it from one. Please help!!!

    What I've done with email in the past is set only one of the machines to delete email from the server (if your company allows you that option). But you need to make sure you check with the one that doesn't delete before the other. You may be able to delete manually as well, so don't delete anything from the server until mail has been downloaded to both (I think this can be done in Apple Mail under advanced prefs). But that won't help with tracking replies, etc. And you'll have to manage mailboxes seperately.
    .Mac has a bunch of syncing options, but you may not want to go to that expense.
    Sorry I don't have any advice on the other stuff, only running 1 Mac.

  • How to set up ALE between 4.7 and ECC 6.0 version

    Hi,
    We are running on 4.7 EE version of SAP with all main modules. Now we are building another system for HR module in ECC 6.0 version of SAP.
    Now the requriement is all the HR transactions posted in ECC 6.0 version shoule be moved to 4.7EE SAP system. For that i need to set up a ALE between ECC 6.0 and 4.7EE.
    So please hlep me the process flow to set up this. Is there any pre-requisites?
    Please suggest me..
    Thanks
    Yadayya

    Hi Yadayya,
    Please follow the link below for details:
    <link to blocked site removed by moderator>
    You can easily transfer IDoc's from 4.7 to ECC 6.0
    Regards,
    Pranav.
    Edited by: Thomas Zloch on Oct 18, 2011 2:09 PM

  • HT201320 what is the incoming mail server host name and user names

    Hi there,
    I am trying to add my school email account to my phone and I am able to fill in the
    Name
    Email
    and Description
    but am not sure what I am supposed to fill out in the Incoming Mail Server spots:
    Host Name
    User Name
    and the password is already filled in?
    and Im not sure what the Outgoing Mail Server is either.

    You'll have to ask someone at your school what the incoming server settings are for their email.  These differ for every email provider/account.

  • Error setting up AG between 1 primary and 2 secondaries

    Setting up AlwaysOn AG from Primary to 2 secondary replicas. Both async.
    Primary to replica1 works fine and completed setup.
    Primary to replica2 gives below errors.
    On primary (LABSVR6)
    A connection timeout has occurred while attempting to establish a connection to availability replica 'LABSVR8' with id [99F3037B-D00A-4421-AA3E-0E1FEAD28CDA]. Either a networking or firewall issue exists, or the endpoint address provided for the replica is
    not the database mirroring endpoint of the host server instance.
    On Replica2 (LABSVR8)
    A connection timeout has occurred while attempting to establish a connection to availability replica 'LABSVR6' with id [B3F0C0F0-3742-4607-89F7-88197334E802]. Either a networking or firewall issue exists, or the endpoint address provided for the replica is
    not the database mirroring endpoint of the host server instance.
    And when trying to join manually through Management Studio, it says:
    Failed to join the instance 'LABSVR8' to the availability group 'SQLAG'. (Microsoft.SqlServer.Management.SDK.TaskForms)
    Failed to join local availability replica to availability group 'SQLAG'.  The operation encountered SQL Server error 41106 and has been rolled back.  Check the SQL Server error log for more details.  When the cause of the error has been resolved,
    retry the ALTER AVAILABILITY GROUP JOIN command. (Microsoft SQL Server, Error: 41158)
    Both using same domain service account for startup - which is anyways added with SYSADMIN.
    Primary to replica1 is working fine.
    Primary to replica2 is having above problem when joining.
    Any suggestions?
    TIA

    Hello,
    not a firewall or SPN issue because primary to replica1 setup went just fine.
    That just means from the primary to replica1 you don't have an issue. It means nothing for primary to replica2 or you wouldn't be having the problem.
    i am able to connect to all servers from all servers using Management Studio.
    This means the default TSQL endpoint is working (1433 for default instances) but AOAG works over a mirroring tcp endpoint. This just proves that nothing is blocking the tsql endpoint.
    Some next steps:
    1. Stop the mirroring endpoint on replica2 and start it again. Check the errorlog to see any errors that may have come up from starting it.
    2. Check the replica2 server name, use the FQDN and double check to make sure DNS has the correct IP associated with the record.
    3. If the endpoint spans a subnet, make sure a route exists.
    4. Attempt to manually telnet to the mirroring endpoint on replica2. If it works you'll get a blinking cursor with a black screen. If not you'll get an error.
    Post back any results, please.
    Sean Gallardy | Blog
    MCM 2008
    MCSM:Data Platform Charter Member

Maybe you are looking for

  • Audio Drift when importing VHS Tapes-Do I need a Canopus ADVC 300

    Embarking on the daunting task of importing/editting >100 2hr VHS tapes, and want to get the best results for my efforts. I pop a tape into a VCR connected via S-Video (video) and RCA (audio) cables to a Sony DVMC-DA1 AD converter, and from there to

  • Having trouble saving text from Arabic-script PDFs

    I have several PDFs created using different versions of the PDF format with text that uses the Arabic script (i.e. Arabic, Farsi, etc.) All I need is to save the text properly into something like a Unicode text file, an RTF or a DOC file, or somethin

  • IPhoto 11 photo book save placed photos

    I made a photobook for my client.  She likes it. I took over 150 photos and used 48 photos for the book. In the photobook screen, the photos I placed in the book are check marked. The ones not used are clear. Is it possible to extract only those plac

  • Configuring Custom JavaScript/CSS and YUI in WSRP Producer Portlet

    I am trying to find information on how to setup/configure WebCenter for WSRP Producer Portlets that have YUI and custom javascript/CSS. While we have gotten some of the YUI features and custom javascript/CSS to work, we find that some references are

  • Batch Automating Design update on 1000 InDesign files- Any ideas?

    I have just been brought in to a new company that issues one page (and separately saved) biographies using inDesign. The biographies use a standard style, with a great deal of reoccurant information (company details, logo etc) and then some personal