Set standard web template

Hello,
We are trying to change the standard web template to a web template we developed in the WAD.
In transaction RSCUSTV27 we put the WAD technical name in the field Ad hoc analysis (=TMPLID_BCAST) but when I run ad-hoc report I'm still getting the standard template (0analysis_pattern)
Please Advice,
Amir

Once you set the default template  you need to restart the J2EE Engineen to get the effect.
thanks.
Wond

Similar Messages

  • Standard Web Template

    We are using Portal and BI for Netweaver 2004s. 
    We want to create our own Web Application Template to be used for Ad-hoc analysis.  We have created the template in the WAD and named it "ZZ_0ANALYSIS_PATTERN_T001".
    We have entered this Template name into the IMG for "Set Standard Web Template" in the field for Ad-hoc Analysis(TCODE RSCUSTV27)
    I expect that whenever I use the BEx Web Analyzer iView that this template would appear.  Instead whenever I preview this iView the "0ANALYSIS_PATTERN" Web Application Template is displayed.  I also have found that the "0ANALYSIS_PATTERN" Template is used if we click on "BEx Web Analyzer" from the Business Explorer Workset.
    FYI - I have SAPALL on the BI system and in the Portal: bi_showcase, business_explorer_showcase,business_planning_showcase

    Hi Heike,
    Could you please guide me through how I'd go about changing the template used in iView ?
    I'm getting an error:  "<i>Web template error in specifications for the Web item report  Parameter REPORT for the Report Web item in the Web template is empty or missing</i> " [and it's using 0REPORT_DEFAULT_TEMPLATE] when I execute a query from Query Designer... from what I'm understanding is that perhaps the iView template is using 0REPORT_DEFAULT_Template even though my SPRO setting is set to 0ANALYSIS_PATTERN for AdHoc.
    Thank you!
    Fionna

  • Cannot set default web template

    Hi
    I'm trying to set default web template through SPRO -> IMG -> Sap NetWeaver -> B.I -> Settings for reporting and analysis -> Bex Web -> Set standard web template -> Ad hoc analysis.
    It works fine in Dev, but in Production the system seems to ignore the setting!
    Even when I write a dummy template that doesn't exist I get no error message !
    Please advice
    Regards
    Shlomi

    D Nore did you found the way to do it ?
    I still have the issue, whatever the place where I force the template, the queries on the portal does not use my specific template.
    I tried :
    pcd:portal_content/com.sap.pct/platform_add_ons/com.sap.ip.bi/iViews/com.sap.ip.bi.bexwebanalyzer
    (this one was working before upgrade to netweaver stack 17).
    as well as
    pcd:portal_content/templates/iviews/sap_bw_report_iview
    and
    pcd:portal_content/templates/iviews/sap_bi7x_report_iview
    none works !
    If you have the tricks share it with us.

  • How to set default Web Template for BEx Query iViews in Portal?

    Hi,
    1) In SPRO you can set the Standard Web Template used, e.g. ZANALYSIS_PATTERN1.
    2) I published a query to Portal and when it runs within Portal, I want it to use a different web template, say ZANALYSIS_PATTERN2.
    I don't want to change the BEx Web Application Query String property for each iView to hardcode the template e.g. to "QUERY=TestQuery1&TEMPLATE=ZANALYSIS_PATTERN2"
    I only want the query name in the iView
    Can I set this somewhere in Portal?  I tried changing the standard "BEx Web Analyzer" iView as mentioned in
    http://help.sap.com/saphelp_nw70/helpdata/en/33/39fa40ee14f26fe10000000a1550b0/frameset.htm (BEx Web Application or Query as iView in the Portal)
    but it still seems to take the template from SPRO even after restarting J2EE

    Hi,
    I don't think anyone is holding back knowledge, I think it's sometimes difficult to filter out "good" questions as opposed to "bad" questions...
    In any case, I don't think it's possible to have different default templates, eg one for the portal and one for the "rest". I'm afraid you'll have to either change each one on the portal or use one for all.
    Cheers,
    Dion

  • How to set default Web Template for BEx Query iViews in BI Portal?

    Hi,
    1) In SPRO you can set the Standard Web Template used, e.g. ZANALYSIS_PATTERN1.
    2) I published a query to Portal and when it runs within Portal, I want it to use a different web template, say ZANALYSIS_PATTERN2.
    I don't want to change the BEx Web Application Query String property for each iView to hardcode the template e.g. to "QUERY=TestQuery1&TEMPLATE=ZANALYSIS_PATTERN2"
    I only want the query name in the iView
    Can I set this somewhere in Portal? I tried changing the standard "BEx Web Analyzer" iView as mentioned in
    http://help.sap.com/saphelp_nw70/helpdata/en/33/39fa40ee14f26fe10000000a1550b0/frameset.htm (BEx Web Application or Query as iView in the Portal)
    but it still seems to take the template from SPRO even after restarting J2EE
    (I just published this question in Portal forum but I think it belongs here instead since it is BI Portal - apologies for the double-post..)

    D Nore did you found the way to do it ?
    I still have the issue, whatever the place where I force the template, the queries on the portal does not use my specific template.
    I tried :
    pcd:portal_content/com.sap.pct/platform_add_ons/com.sap.ip.bi/iViews/com.sap.ip.bi.bexwebanalyzer
    (this one was working before upgrade to netweaver stack 17).
    as well as
    pcd:portal_content/templates/iviews/sap_bw_report_iview
    and
    pcd:portal_content/templates/iviews/sap_bi7x_report_iview
    none works !
    If you have the tricks share it with us.

  • Standard web template doesn't work

    Hi,
    I am currently experiencing difficulties when executing query from query designer and using Java web from RSRT.
    I get this error message  The Web template "WEB_TEST" does not exist in the master system every time.
    The web template "WEB_TEST" shouldn't exist in BI 7 because it belongs to BW 3.X and I don't know why I keep on getting this error message.
    I have set the standard web template from RSCUSTV27 to 0ANALYSIS_PATTERN and even make the fields empty but I still get the error message.
    If I use RSCUSTV21 and change the settings  I can easily see the result.
    Can someone tell me why I can still get this error message and where can I set my default web template because SPRO settings doesn't work
    thanks

    Hi,
    Default template 0Analysis_pattern wasn't changed or edited and I have installed it from Business content again and changed the settings from RSCUSTV27.
    I think the settings that points to default template in Java web has changed. and I don't know if this was done in portal side or BI.
    I can easily change the template settings back and front in ABAP Web (RSCUSTV21) and it works just fine.change
    I made a work around solution by copying 0Analysis_pattern and renaming it to "WEB_TEST" template and Java web works properly.
    so settings is pointing to WEB_TEST template and this template doesn't exist in the new BI. Its in BW 3.X
    thanks

  • What is the STANDARD Web Template in BI 7.0?

    Hello guys,
    Do you know what is the Standard Web Template in BI 7.0?
    Today we only use Workbooks and the java is already installed.
    Do we have to do some configuration in this Web template for our first execution?
    Thank you,
    Carlos Edaurdo

    Hi,
      0ANALYSIS_PATTERN is the standard Web template for the BI Queries when executed through Web.
      We can copy this template to a Ztemplate and make the changes necessory based on project need and can be assigned
      as default  in Configuration settings .
    Thanks,
    Prakash

  • In which DB table standard Web Templates located and also HTML code

    Hi gurus,
    Please help me on locaton of Standard Web Templates in DB table and how can I see the HTML code in WAD. Thanks in advance and I will assign points.
    Kaveri

    Hi,
    check the following link :
    http://help.sap.com/saphelp_nw04s/helpdata/en/43/54e487c277321ae10000000a422035/frameset.htm
    1. open the web application designer
    2. left side u'll be seeing the applications like Table, dropwdown box , check box etc
    3.usually u drag and drop the application from left to right side--> once u dropped it u'll see 3 tabs at the bottom in that one of the Tab is HTML just click on it, it will lead u to the coding part.

  • Hiding buttons in the standard web template based on roles

    Hi,
    In the standard web template, the requirement is to hide few buttons based on the authorization.
    Can this be achieved by assigning the roles? If not what is the work around?
    Regards
    Narayana

    Narayana,
    Restricting the Buttons is not feasible thru Role restrictions, you need to work around with the WAD..
    Action Events with Btn Clck.
    Cheer's
    HVR.

  • How to create transport request for standard web template

    hi all
    can any one tell me the step by step procedure to create transport request for standard template?
    thanks
    shalini

    Business Content --> Choose & Install the standard web template & then collect the object for transport...Assign a Package & when prompted for Transport Request --> Opt for a new transport request.
    Message was edited by:
            Jerome

  • How to define a standard web template for a specific group of queries?

    Hello experts,
    I had to enhance the standard web template 0ADHOC and saved it as ZADHOC.
    Then in SPRO t-code I defined it as the standard web template. The problem is: it started to be the standard web template for all the company queries.
    Is there a way to define it as standard only for the queries of my project? Like adding some parameter in the web link only for my project queries?
    Thanks in advance,
    Helder

    I have figured out how to  slice it up myself,  however it appears as though I have to do it all  manually, drawing  each box myself.
    Yes, that's how it will have to be. There is no pertinent slicing in the PSD.
    This will result in either ALLOT of  work making sure  that each box is perfectly aligned with the one before  it, or uneven  slices.
    I am obviously doing something wrong.
    Yes, you are not using guides. You know, those cute turqoise lines of which the document already has a few when opening it...
    As for everything else - the template is simply rubbish. It's poorly organized and mostly unsuitable for building a website template right off the bat. Your work needs to start there by properly grouping items to mimic button states and then exporting them in two passes. And then there's things like this large dummy text etc. that simply don't make sense. Anyway, even if it sounds liek the same record over again: The biggest failure of any such work is to assume that PS could even spit out a working web page. All a web designer would use it for is to extract the graphical elements, but teh rest would stil lbe designed properly with standards compliance in mind in a web design app...
    Mylenium

  • Activation of Standard Web Template

    Can anybody tell me what I need to do to activate the standard web template?
    I have defined 0ADHOC as my web template in RSCUSTV21, but none of the template contents are displayed in my web applications.

    Hi Stuart,
    The standard web template comes into play when you publish the query to the web either form the query designer or from the BEx Analyzer. At this time, the results are embedded in this standard template. IS this what you are trying to do? If you create your own web template in the WAD, then you need to start from the scratch and build it up with the web items you require. The standard web template is not used by default for any web applications that you may create.
    Hope this helps...please post back if I have misunderstood your requirement.

  • To copy standard web template

    Hi guys,
    i need to modify a standard web template,
    how do i copy as i was told not to touch
    the original, so that it becomes my default,
    help me out guys,
    Thanks

    Hi:
    This workes for me:
    In BW, run transaction:
    SE38
    COpy program 'RS_TEMPLATE_MAINTAIN'.
    Execute the program.
    In the next screen, you will see two drop-down boxes.
    1) Technical Name of a Template
    Here, select 0ADHOC
    Again Execute
    In the new screen, select the third Icon - Copy As.
    Give New Name. Make sure its not there before, so gicve something like Z0ADHOC1, etc.
    You are done.
    Open WAS and select Open Web  Template.
    THere, you will either see the new one in History or do a seach with the name that you just gave.
    Ram C.

  • Modyfiying standard web template

    Hi,
    I have made a copy of 0ADHOC template (ZADHOC) and want to add element to it: query view selection.
    I do it in that way;
    1. open zadhoc
    2. drag&drop query view selection icon from standard web item to zadhoc layout
    3. save
    4. Execute in browser...  and there is always the same error in browser: "The affected Web item does not exist. Check the spelling"
    Can somebody write me how to do this or advice where to find documentation on modifying web templates...
    Thanks
    Andrzej

    'affected web item' is attribute of query view selection and need to be filled.
    ak

  • Why a standard web template like 0ADHOC_CHART_LIB can't be opened?

    Goto Metadata Repository, check local activated Web Template Name, 1st web template listed is called 0ADHOC_CHART_LIB, but why Web Application Designer can't open it?
    Thanks

    Hello,
    0ADHOC_CHART_LIB is a Library Item therefore it is no real template and can´t be opened directly in WAD.
    a Library Item is e.g. a chart item with some additional standard paramater which can be reused by library in another template.
    Goto WAD create a new template there you can browse through library item. unfortunately i have no system here so i cannot say where the library function is in detail.
    Regards Marcus

Maybe you are looking for

  • How to make windows 8.1 compatible with dng converter 8.1?

    I have installed the DNG Converter 8.1 so that I can view/edit RAW files on Photoshop Elements 12, but Windows 8.1 states "the source folder does not contain any supported camera raw files".  I have an Sony Alpha 6000 (version 8.4), and have moved th

  • (yet another) JFrame background image topic

    So I know there's about 20 other threads asking this same question, but I've read them all and still can't seem to get my code to work. Here's what I have: import javax.swing.*; import java.awt.Image; import javax.imageio.ImageIO; public class IndexF

  • Best way to keep story synchronized across formats in InDesign?

    I am working on an ebook that will be published as pdf and epub, and possibly another format, and all of the work is being done in InDesign CS4 (though I plan to use Acrobat for the final PDF stages.) My problem is how to work with the stories when I

  • Creating SWF in Illustrator

    Hello, I get in trouble to create very simple animations in illustrator. I have a green square, and I don't know how to do to change its color when the mouse is over ... Does somebody can help me ? Thanks a lot!

  • Error installing the flash player in firefox 3.6.8 (win7)

    It downloads but when the red adobe box pops up, the install button is greyed out and never lets me complete the install. I have disabled the anti-virus (avg) but it refuses to install. Same computer 1 moth ago with XP3 had no problems. Have any idea