Set up for Extraction the data from SAP ECC system

Hi!
I would like to analyze the transaction and master data from SAP ECC system into SAP BI system.
I have created the connection (entry for SAP ECC system) within SAP NetWeaver System.
Unfortunately when I try to load the transaction data for Info source the process does not end successfully.
There are no information within SM58 on source system.
The ST22 does not contain some suitable information.
Question:
Which settings do I miss and how can solve my problem?
(user authorization, etc.)
Thank you very much!
regards
Holger

Hi!
many thanks for your reply.
The error I get:
Errors while sending packages from OLTP to BI
Diagnosis
No IDocs could be sent to BI using RFC.
System Response
There are IDocs in the source system ALE outbox that did not arrive in the ALE inbox of BI.
Further analysis:
Check the TRFC log.
You can access this log using the wizard or the menu path "Environment -> Transact. RFC -> In source system".
Error handling:
If the TRFC is incorrect, check whether the source system is fully connected to BI. In particular, check the authorizations of the background user in the source
Can you please help me to identify the error?
Thank you!

Similar Messages

Loading of transaction data from SAP ECC system failed

Hi!
I successfully connected SAP ECC system to SAP BI system.
The following steps have been executed:
- user ALEREMOTE with max. authorization
- RFC destination
- Distributing Data model
- Generated Partner profile
- Maintaining message types in WE20
Now when I try to load any data from SAP ECC system the loading process in hanging in status "yellow" and never comletes.
[0FI_AR_4|http://www.file-upload.net/view-1447743/0FI_AR_4.jpg.html]
The following steps within Load process are yellow:
Extraction (messages): Missing messages
Missing message: Request received
Missing message: Number of sent records
Missing message: Selection completed
Transfer (IDocs and TRFC): Missing messages or warnings
Request IDoc : Application document posted (is green)
Data Package 1 : arrived in BW ; Processing : 2nd processing step not yet finished
Info IDoc 1 : sent, not arrived ; Data passed to port OK
Info IDoc 2 : sent, not arrived ; Data passed to port OK
Info IDoc 3 : sent, not arrived ; Data passed to port OK
Info IDoc 4 : sent, not arrived ; Data passed to port OK
Subseq. processing (messages) : Missing messages
Missing message: Subseq. processing completed
DataStore Activation (Change Log) : not yet activated
Question:
Can some one give me some technical steps (tcode, report) to solve this problem?
Thank you very much!
Holger

Hi!
Many thanks for your answer.
Via BD87 on BW system I detect that all the IDOC's (type: RSRQST) will be received from SAP ECC system.
Via tcode SM58 I could not detect any entries.
However the loading status from yesterday is set to "red".
The errors are:
Extraction (messages): Missing messages
Data Package 1 : arrived in BW ; Processing : 2nd processing step not yet finished
Info IDoc 1 : sent, not arrived ; Data passed to port OK
Info IDoc 2 : sent, not arrived ; Data passed to port OK
Can you investigate my issue again?
Thank you very much!

How to extract the data from SAP using Msaccess tool ?

Hi Experts,
Purpose u2013
Want to extract the data in a better way rather than using the T.code u2013 SE16
regards
Kedar Kulkarni

Hi,
Try this...
Please use the standard ABAP program "RIACCESS".
Before using the program "RIACCESS", you need to install the PS utilities, which are part of SAPGUI install CD.
It is available in the "\SAPGUI\PS directory".
Then do the followings :
1. Select transaction code SALE -> Systems in network-> Define RFC Destination.
2. You will need two RFC destinations (TCP/IP connections for the front-end workstation).
Setup the two RFC destinations PS_ACCESS_1 and PS_ACCESS_2 and you'll have to get them to point to wdpsastr.exe and wdpsatab.exe respectively.
3. Then execute RIACCESS and choose PS_ACCESS_1 to generate access tables.
The system must also be able to access the RFC-DLL files (librfc2.dll, librfc3.dll, librfc4.dll, librfc5.dll, librfc6.dll, vrfc.dll).
Please note that Access only supports tables with up to 255 fields.

Webservice:get data from SAP ECC

hi,
i want webservice.that webservice will fetch the data from sap ecc system.
i need steps for creating webservice.i have some functionality .what can i expose as webservice.
thanks
raj

Hi Raj,
If we trying to fetch data from SAP ECC system then expsoing as a web service from NWDS (Netweaver Developer studio ) would the best option.First we need to create a Portal Service that invokes the functionalities of the SAP application component( Business solution which uses ECC) using the SAP Java Connector. Then you can create a Web Service from the Portal Service.
If your SAP application component runs on SAP Web Application Server (WebAS) 6.20 or later, then you can directly enable Web Services on the application component by using the application server's native Web Service capabilities.
1. To turn on the WebAS 6.20 SOAP Processor, you need to:
Configure the Internet Communication Framework (ICF) of the WebAS to start the Internet Communication Manager (ICM) and activate the HTTP protocol support
Use transaction SICF to activate the SOAP Runtime Handler: default_host -> sap -> bc -> soap -> rfc.
Once the SOAP Processor is turned on, the RFM-implemented Web Services can be invoked at http://<host_name>:<port_number>/sap/bc/soap/rfc
6.20 also provides a Web Service Browser, which is a BSP web application that can be used to browse all RFM-implemented Web Services in the system, and generate WSDLs for these Web Services.
2. In a WebAS 6.40-based SAP application component, such as SAP Enterprise Core Component (ECC) 5.0, or a WebAS 7.0-based application component, such as ECC 6.0, by default, few Web Services are pre-delivered by SAP. But it is pretty easy to create Web Services in a WebAS 6.40-based system.
Inside-Out Approach: if within the SAP application component there already exist one or several RFMs or BAPIs that suit your needs, you can create Web Services based on them without any additional programming. The basic steps include:
Using the Service Definition Wizard, which can be started from transaction SE80, SE37, or BAPI, to create a (Web) service definition from an RFM, a function group, or a BAPI.
When creating the service, you have the option to rename or hide operations (methods) and parameters, define default values for parameters, and changing parameter types.
After the service definition is created, you need to use transaction WSCONFIG to release the service definition for the SOAP runtime.
Afterwards, by using transaction WSADMIN, you can for any released Web Service, call the Web service homepage which provides utilities for using and testing the Web Service, generate WDSL, configure the logging and tracing settings, and publish the Web Service as a Business Service in an UDDI registry.
Hope these steps are helful to you.
Regards,
Shaila

Question on the flow of the data from SAP R/3 to SAP BW

hai bwgurus,
I am learner of sap bw ,i have small doubt in the extracting the data from sap r/3 to sap bw i.e
Extraction is always performed only on master data table not on transaction table , Am I right or wrong pls correct me with an detailed explanation ?
EmailId:[email protected]
Regards
Raju

Hi raju,
Extraction is always on Masterdata and as well as transaction data.
a transaction is event that ocurs on masters(like business example would be there will be a distributor who orders certain quantity of material so Disturbutor will be the companies sole distrubutor who comes under master and transaction data is the qty of materila he purchsed).All the transactions occur in SAP r/3 and that data will be replicated to BW for Data ware hosue and reporting.
Reg
Ram
""assign points if it helps""

Extract the data from xbrl source

Hi ,
I want to extract the data from xbrl source system . I have one xsd, few xml files and one xbrl file . I have imported xsd file but lot of the xml files failing to parse against xsd.
Please guide me how to extract the data from xbrl file .
Thanks & Regards,
Ramana.

Hi,
Yes it will work, follow the bellow steps,
Steps
1) Create a blank database in Microsoft Access, lets call it 'TestDB.mdb'. I saved this mdb file in my XI server path itself,
xiserver\xitemp\db\TestDB.mdb
(you can save it anywhere provided it has a shared access)
2) Add a table in TestDB.mdb, call it TEST_EMPLOYEE with the following rows and save it.
EMPID type text
EMPNAME type text
EMPAGE type number
FLAG type text
3) Now follow the same steps as mentioned in the blog,
/people/sap.user72/blog/2005/06/01/file-to-jdbc-adapter-using-sap-xi-30
except for the receiver jdbc adapter configuration.
4) In the receiver JDBC adapter configuration pass the following parameters,
Transport Protocol: JDBC 2.0
Message Protocol: XML SQL Format
Adapter Engine: Integration Server
JDBC Driver: jdbc.odbc.JdbcOdbcDriver
Connection: jdbc:odbc:Driver={Microsoft Access Driver (*.mdb)};DBQ=//xiserver/xitemp/db/TestDB.mdb
5) In my case there is no userid and password required, but if you have userid and password, then the parameter for Connection becomes,
jdbc:odbc:Driver={Microsoft Access Driver (*.mdb)};DBQ=//xiserver/xitemp/db/TestDB.mdb;Uid=yourid;Pwd=yourpwd;
Reward Points ,if found Useful.
Thanks,
Satish.

Need to extract the data from the CRM table : SCAPPTSEG

Hi BW Experts,
I want to extract the Data from CRM Table "SCAPPTSEG" to BW. The dates are stored in UTC Format.So for getting the date in CET format, we have used the Function Module "IB_CONVERT_FROM_TIMESTAMP".
I want to create a datasource for extracting the data from "SCAPPTSEG" table and i need to use the function module for getting the date in CET Format.
Can i achieve this action through Generic Extraction.
please provide me the steps to achieve this.
Thanks,
Shahina.A

not answered

Getting Data from SAP ECC & BI to Crystal Reports and then Broadcasting.

Hi,
I need to get the data from SAP ECC & BI to Crystal reports and then after formating data in Crystal reports, my requierment is to send via email (Broadcasting). Is there any option to Broadcast from Crystal reports?
I read Ingo Hilgefort blogs, but I need in detail steps such as to verify Integration Kit is installed or not and also how to create connections in between SAP ECC and Crystal. What are the Security setups(User IDs and Authorizations) involved?
What is best option for email/broadcasting for Crystal Reports?
Your help is appreciated.
Thanks.
SVK.

Hi,
I would suggest you then start with the installation and user guide fr the SAP Integration Kit.
Ingo

** Not able to import IDoc from SAP ECC system

Hi Friends,
I am not able to import the IDoc from SAP ECC system in IR. I have checked that, hostname, client, server no. everthing is correct. I checked in SLD also. Host Name is correct.
While import (after giving the user name and password), I am getting the following error.
Problems to reach R3 System
What could be the probelm ?
Kindly help me friends.
Thanking you.
Kind regards,
Jegathees P.

Hi,
Just counter check following step
1. Go to SWCV definition tab select radio button for Import of RFC....
2. In Connection Data for Import from SAP System maintain correct System and correct Client.
3. Make sure you maitain ECC system in Central SLD.
4. In Import Screen check at the top of the screen have SAP System, is that system from where you want to import the IDOC.
With Regards
Sunil

How to Extract the data from Microsoft BI to SAP BI 7

Dear All,
We have a requirement to Extract the data from Microsoft BI to Sap BI 7. How can we achieve this??
Shall we use the DB connection for this??
If anyone knows about this please give me some suggestion.
Thanks in advance
Sathiya

Hi All,
How to include the DBMS name when I give the connection. We are using the Data base as MS-BI.
Please guide me
Thanks in advance.
Regards
Sathiya

Lock NOT set for: Archiving the data from a data target

Dear Expert,
I try to archive one of my info cube, when i start to write the Archive file the Free Space in the Archive folder not enough and it make the process error.
Then i try to changes the Archive folder to another path with enough free space. But when i start to write the archive file with new variant this error message came up :
==============================================================
An archiving run locks InfoProvider ZICCPS810 (archivation object BWCZICCP~0)
Lock NOT set for: Archiving the data from a data target
InfoProvider ZICCPS810 could not be locked for an archiving session
Job cancelled after system exception ERROR_MESSAGE
==============================================================
Please Help Me.
Wawan S

Hi Wawan,
If the earlier archive session resulted in error, please try to invalidate the earlier session in archive management and try running archive job again.
Hope this helps,
Naveen

CC 5.2 Alert Generation - Not extracting any data from SAP

Hi there,
We are trying to use the alert function for critical transactions in CC 5.2. We have set the relevant parameters in CC. The Alert_Log.txt is created successfully but it is not extracting any data from SAP. Is there any settings that I am missing here, both in R/3 and CC 5.2? I really appreciate your help. Below is the Alert_Log.txt for your review.
Dec 20, 2007 2:27:32 PM com.virsa.cc.xsys.riskanalysis.AnalysisDaemonBgJob scheduleJob
FINEST: Analysis Daemon started background Job ID:41 (Daemon ID D:\usr\sap\CC1\DVEBMGS00\j2ee\cluster\server0\. Thread ID 0)
Dec 20, 2007 2:27:32 PM com.virsa.cc.xsys.riskanalysis.AnalysisDaemonBgJob scheduleJob
INFO: -
Scheduling Job =>41----
Dec 20, 2007 2:27:32 PM com.virsa.cc.xsys.bg.BgJob run
INFO: --- Starting Job ID:41 (GENERATE_ALERT) - AlertGeneration_Testing
Dec 20, 2007 2:27:32 PM com.virsa.cc.xsys.bg.BgJob setStatus
INFO: Job ID: 41 Status: Running
Dec 20, 2007 2:27:32 PM com.virsa.cc.xsys.bg.BgJob updateJobHistory
FINEST: --- @@@@@@@@@@@ Updating the Job History -
1@@Msg is AlertGeneration_Testing started
Dec 20, 2007 2:27:32 PM com.virsa.cc.xsys.bg.dao.BgJobHistoryDAO insert
INFO:
Background Job History: job id=41, status=1, message=AlertGeneration_Testing started
Dec 20, 2007 2:27:32 PM com.virsa.cc.xsys.bg.BgJob alertGen
INFO: @@@ Alert Generation Started @@@
Dec 20, 2007 2:27:32 PM com.virsa.cc.xsys.bg.BgJob alertGen
INFO: @@@ Conflict Risk Input has 1 records @@@
Dec 20, 2007 2:27:32 PM com.virsa.cc.xsys.bg.BgJob alertGen
INFO: @@@ Critical Risk Input has 1 records @@@
Dec 20, 2007 2:27:32 PM com.virsa.cc.xsys.bg.BgJob alertGen
INFO: @@@ Mitigation Monitor Control Input has 1 records @@@
Dec 20, 2007 2:27:32 PM com.virsa.cc.comp.BackendAccessInterface alertGenerate
INFO: @@@@@ Backend Access Interface execution has been started @@@@@
Dec 20, 2007 2:27:32 PM com.virsa.cc.comp.BackendAccessInterface alertGenerate
INFO: @@System=>R3
Dec 20, 2007 2:27:32 PM com.virsa.cc.comp.BackendAccessInterface alertGenerate
INFO:
No of Records Inserted in ALTCDLOG =>0 For System =>R3
Dec 20, 2007 2:27:32 PM com.virsa.cc.comp.BackendAccessInterface append_TcodeLogFile
INFO: *********SOD Tcode Size=>0**************
Dec 20, 2007 2:27:32 PM com.virsa.cc.comp.BackendAccessInterface append_TcodeLogFile
INFO: *********Alert Tcode Log File=>D:\cc_alert_log\cc_alert_log1.txt is created**************
Dec 20, 2007 2:27:32 PM com.virsa.cc.comp.BackendAccessInterface alertGenerate
INFO:
File Output Log File Size ==>0----
For System =>R3
Dec 20, 2007 2:27:32 PM com.virsa.cc.comp.BackendAccessInterface alertGenerate
INFO: -
Conf Last Run Date=>2007-12-12--Conf Last Run Time=>12:45:11--
Dec 20, 2007 2:27:32 PM com.virsa.cc.comp.BackendAccessInterface alertGenerate
INFO: ==$$$===Notif Current Date=>2007-12-20==$$$==Notif Current Time=>14:27:32===$$$===
Dec 20, 2007 2:27:32 PM com.virsa.cc.comp.BackendAccessInterface send_AlertNotification
INFO: ****************** send Notification Alert Type=>1
Dec 20, 2007 2:27:32 PM com.virsa.cc.comp.BackendAccessInterface send_AlertNotification
INFO: ******Alert Notification=>CONFALERTNOTIF==LastRunDate:=>2007-12-20==LastRunTime:=>00:00:00==Curr Date=>2007-12-20==Curr Time=>14:27:32*********
Dec 20, 2007 2:27:32 PM com.virsa.cc.comp.BackendAccessInterface send_AlertNotification
INFO: ****************** send Notification Alert Type=>2
Dec 20, 2007 2:27:32 PM com.virsa.cc.comp.BackendAccessInterface send_AlertNotification
INFO: ******Alert Notification=>CRITALERTNOTIF==LastRunDate:=>2007-12-20==LastRunTime:=>00:00:00==Curr Date=>2007-12-20==Curr Time=>14:27:32*********
Dec 20, 2007 2:27:32 PM com.virsa.cc.comp.BackendAccessInterface send_AlertNotification
INFO: ****************** send Notification Alert Type=>3
Dec 20, 2007 2:27:32 PM com.virsa.cc.comp.BackendAccessInterface send_AlertNotification
INFO: ******Alert Notification=>MITALERTNOTIF==LastRunDate:=>2007-12-20==LastRunTime:=>00:00:00==Curr Date=>2007-12-20==Curr Time=>14:27:32*********
Dec 20, 2007 2:27:32 PM com.virsa.cc.xsys.mgmbground.dao.AlertStats execute
INFO: Start AlertStats.............
Dec 20, 2007 2:27:32 PM com.virsa.cc.xsys.mgmbground.dao.AlertStats execute
INFO: start:Sat Dec 01 14:27:32 CST 2007
Dec 20, 2007 2:27:32 PM com.virsa.cc.xsys.mgmbground.dao.AlertStats execute
INFO: now:Thu Dec 20 14:27:32 CST 2007
Dec 20, 2007 2:27:32 PM com.virsa.cc.xsys.mgmbground.dao.AlertStats execute
INFO: end: Tue Jan 01 14:27:32 CST 2008
Dec 20, 2007 2:27:32 PM com.virsa.cc.xsys.mgmbground.dao.AlertStats execute
INFO: Month 2007/12
Dec 20, 2007 2:27:32 PM com.virsa.cc.xsys.bg.BgJob alertGen
INFO: @@@=== Alert Generation Completed Successfully!===@@@
Dec 20, 2007 2:27:32 PM com.virsa.cc.xsys.bg.BgJob setStatus
INFO: Job ID: 41 Status: Complete
Dec 20, 2007 2:27:32 PM com.virsa.cc.xsys.bg.BgJob updateJobHistory
FINEST: --- @@@@@@@@@@@ Updating the Job History -
0@@Msg is Job Completed successfully
Dec 20, 2007 2:27:32 PM com.virsa.cc.xsys.bg.dao.BgJobHistoryDAO insert
INFO:
Background Job History: job id=41, status=0, message=Job Completed successfully
Dec 20, 2007 2:27:32 PM com.virsa.cc.xsys.riskanalysis.AnalysisDaemonBgJob scheduleJob
INFO: -
Complted Job =>41----

Hi,
we have ran into similar issue of alert log being not displayed accurately in CC 4.0 version and we implemented the Note 1044393 - CC5.1 Alerts, it did work for us, as you are using CC5.2, I would recommend you to check the code and then try this note. But iam still skeptical whether this note will be helpful to you or not.
Thanks,
Kavitha

How to extract Inventory data from SAP R/3 system

Hi friends How to extract Inventory data from SAP R/3 system? What are report we may expect from the Inventory?

Hi,
Inventory management
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/documents/a1-8-4/how%20to%20handle%20inventory%20management%20scenarios.pdf
How to Handle Inventory Management Scenarios in BW (NW2004)
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f83be790-0201-0010-4fb0-98bd7c01e328
Loading of Cube
ref.to page 18 in "Upgrade and Migration Aspects for BI in SAP NetWeaver 2004s" paper
http://www.sapfinug.fi/downloads/2007/bi02/BI_upgrade_migration.pdf
Non-Cumulative Values / Stock Handling
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/93ed1695-0501-0010-b7a9-d4cc4ef26d31
Non-Cumulatives
http://help.sap.com/saphelp_nw2004s/helpdata/en/8f/da1640dc88e769e10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/80/1a62ebe07211d2acb80000e829fbfe/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/80/1a62f8e07211d2acb80000e829fbfe/frameset.htm
Here you will find all the Inventory Management BI Contents:
http://help.sap.com/saphelp_nw70/helpdata/en/fb/64073c52619459e10000000a114084/frameset.htm
2LIS_03_BX- Initial Stock/Material stock
2LIS_03_BF - Material movements
2LIS_03_UM - Revaluations/Find the price of the stock
The first DataSource (2LIS_03_BX) is used to extract an opening stock balance on a
detailed level (material, plant, storage location and so on). At this moment, the opening
stock is the operative stock in the source system. "At this moment" is the point in time at
which the statistical setup ran for DataSource 2LIS_03_BX. (This is because no
documents are to be posted during this run and so the stock does not change during this
run, as we will see below). It is not possible to choose a key date freely.
The second DataSource (2LIS_03_BF) is used to extract the material movements into
the BW system. This DataSource provides the data as material documents (MCMSEG
structure).
The third of the above DataSources (2LIS_03_UM) contains data from valuated
revaluations in Financial Accounting (document BSEG). This data is required to update
valuated stock changes for the calculated stock balance in the BW. This information is
not required in many situations as it is often only the quantities that are of importance.
This DataSource only describes financial accounting processes, not logistical ones. In
other words, only the stock value is changed here, no changes are made to the
quantities. Everything that is subsequently mentioned here about the upload sequence
and compression regarding DataSource 2LIS_03_BF also applies to this DataSource.
This means a detailed description is not required for the revaluation DataSource.
http://help.sap.com/saphelp_bw32/helpdata/en/05/c69480c357354a8846cc61f7b6e085/content.htm
http://help.sap.com/saphelp_bw33/helpdata/en/ed/16c29a27db6e4d81a015be8673eb80/content.htm
These are the standard data sources used for Inventory extraction.
Hope this helps.
Thanks,
JituK

How can I extract the data from Xstring .

Hi Gurus ,
How can I extract the data from a XSTRING .
I have to get the data which is filled in the survey form the data is getting saved in form of xstring .
Someone told me that there is a standard FM for that . but I am not able to find .
Please reply with the FM in case some one knows about it .
Thanks in advance .

The following code works as of 7.0 (in any SAP system):
FORM XSTRING_TO_STRING USING input TYPE xstring CHANGING output TYPE string.
TYPES : BEGIN OF ty_struc,
          line TYPE c LENGTH 100,
        END OF ty_struc.
DATA lt_char TYPE TABLE OF ty_struc.
DATA length TYPE i.
length = xstrlen( input ) / cl_abap_char_utilities=>charsize.
CALL FUNCTION 'SCMS_XSTRING_TO_BINARY'
EXPORTING
    buffer                = input
tables
    binary_tab            = lt_char.
CONCATENATE LINES OF lt_char INTO output RESPECTING BLANKS.
output = output(length).
ENDFORM.
Edited by: Sandra Rossi on Mar 30, 2010 12:24 AM

Use LINQ to extract the data from a file...

Hi,
I have created a Subprocedure CreateEventList
which populates an EventsComboBox
with a current day's events (if any).
I need to store the events in a generic List communityEvents
which is a collection of
communityEvent
objects. This List needs to be created and assigned to the instance variable
communityEvents.
This method should call helper method ExtractData
which will use LINQ to extract the data from my file.
The specified day is the date selected on the calendar control. This method will be called from the CreateEventList.
This method should clear all data from List communityEvents.
A LINQ
query that creates CommunityEvent
objects should select the events scheduled for selected
day from the file. The selected events should be added to List
communityEvents.
See code below.
Thanks,
public class CommunityEvent
private int day;
public int Day
get
return day;
set
day = value;
private string time;
public string Time
get
return time;
set
time = value;
private decimal price;
public decimal Price
get
return price;
set
price = value;
private string name;
public string Name
get
return name;
set
name = value;
private string description;
public string Description
get
return description;
set
description = value;
private void eventComboBox_SelectedIndexChanged(object sender, EventArgs e)
if (eventComboBox.SelectedIndex == 0)
descriptionTextBox.Text = "2.30PM. Price 12.50. Take part in creating various types of Arts & Crafts at this fair.";
if (eventComboBox.SelectedIndex == 1)
descriptionTextBox.Text = "4.30PM. Price 00.00. Take part in cleaning the local Park.";
if (eventComboBox.SelectedIndex == 2)
descriptionTextBox.Text = "1.30PM. Price 10.00. Take part in selling goods.";
if (eventComboBox.SelectedIndex == 3)
descriptionTextBox.Text = "12.30PM. Price 10.00. Take part in a game of rounders in the local Park.";
if (eventComboBox.SelectedIndex == 4)
descriptionTextBox.Text = "11.30PM. Price 15.00. Take part in an Egg & Spoon Race in the local Park";
if (eventComboBox.SelectedIndex == 5)
descriptionTextBox.Text = "No Events today.";

Any help here would be great.
Look, you have to make the file a XML file type -- Somefilename.xml.
http://www.xmlfiles.com/xml/xml_intro.asp
You can use NotePad XML to make the XML and save the text file.
http://support.microsoft.com/kb/296560
Or you can just use Notepad (standard), if you know the basics of how to create XML, which is just text data that can created and saved in a text file, which, represents data.
http://www.codeproject.com/Tips/522456/Reading-XML-using-LINQ
You can do a (select new CommunityEvent) just like the example is doing a
select new FileToWatch and load the XML data into the CommunityEvent properties.
So you need to learn how to make a manual XML textfile with XML data in it, and you need to learn how to use LINQ to read the XML. Linq is not going to work against some flat text file you created. There are plenty of examples out on Bing and Google
on how to use Linq-2-XML.
http://en.wikipedia.org/wiki/Language_Integrated_Query
<copied>
LINQ extends the language by the addition of query
expressions, which are akin to
SQL statements, and can be used to conveniently extract and process data from
arrays, enumerable
classes, XML documents,
relational databases, and third-party data sources. Other uses, which utilize query expressions as a general framework for readably composing arbitrary computations, include the construction of event handlers[2]
or
monadic parsers.[3]
<end>

Set up for Extraction the data from SAP ECC system

Similar Messages

Maybe you are looking for