Setting a password?

I have a wireless router WRT54G and Im trying to set a password for my network. But when i type 192.168.1.1 or 192.168.1.245 to the addressfield, the Internet Explorer just says that the page cannot display. How can I set the password to the network then??

Brenda wrote:
-zikk- wrote:
I have a wireless router WRT54G and Im trying to set a password for my network. But when i type 192.168.1.1 or 192.168.1.245 to the addressfield, the Internet Explorer just says that the page cannot display. How can I set the password to the network then??
Hi there, your PC can only communicate to the router if it has the same IP range like 192.168.1.x. If it does then using the browser it will log on to the 192.168.1.1 window (thats if you didnt change the routers default IP address) and from there you can do whatever you want to the router.
To check your PC IP, double click on the double monitor on the systray and hit the support tab.
in the event you don't have the little double monitor on your systray,
you will need to get this from the commandline
start > run > cmd
.. and then type
ipconfig
the address for the gateway should be your router, provided you computer is connected directly to it and the router is configued to provide dhcp.

Similar Messages

My ipod won't let me connect to wi-fi, won't let me restore or reset it, and it keeps telling me i knew a passcode for any one and I never set a password up. How do I fix this?

My ipod won't let me connect to wi-fi, won't let me restore or reset it, and it keeps telling me i knew a passcode for any one and I never set a password up. How do I fix this? Says try again in 6180146 min. my passcode setting is off, but restrictions are on. Very frustrated. please help

Disabled
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

I didn't set any password during setup of Lion, but now when I want to download stuff from safari, it asks me for password? plz help

I bought a new macbook air pre loaded with Lion. while setting up the system, I just input the user name, and didn't set any password.
But now when I wanna download stuff off safari, it asks me for password. The user name appears (the same one which I set) but it keeps on asking me the password which I never set. Can some one please help me. Thanks!

I did it like that, but for the purpose of not having to type my password every time since I'm installing a lot of programs, and yes, it asks for the password, but do not type anything and just click "ok" or "install", since you haven't set a password it should let you go through. I guess it asks for the "password" just to let you know it will install something, but just click ok.
I will set up a password once i have install everything in System Preferences/Users & Groups
Hope it helps...

On my iphone, icloud is set to an apple id that i no longer use and i keep getting asked to enter a password. Cannot remember the password. When i try to re-set the password, it sends a email to a address no longer used. Will not accept any dob i enter

I have icloud on my phone with an apple id that I no longer use. I keep getting asked to enter the password for this ID. However I can't remember the password.
When I try to re-set the password, a e-mail will be send to an address I no longer use and can't access.
I then try to answer the security questions, but the date of births I enter are not accepted
Any ideas?
Paul

Welcome to the Apple community.
This feature has been introduced to make stolen phones useless to those that have stolen them.
However it can also arise when the user has changed their Apple ID details with Apple and not made the same changes to their iCloud account/Find My Phone on their device before upgrading to iOS 7, or if you restore from a previous back up made before you changed your details.
The only solution is to change your Apple ID back to its previous state with Apple at My Apple ID, verify the changes, enter the password as requested on your device and then turn off "find my phone".
You should then change your Apple ID back to its current state, verify it once again, delete the iCloud account from your device and then log back in using your current Apple ID. Finally, turn "find my phone" back on once again.
This article provides more information about Activation Lock.

How to programmatically set initial password when a user is created in OID

We are using the odihragent synchronization process to automatically create users in OID when an employee record is created. We would like to set the initial password for the newly created user to their last name + the last 4 digits of their SSN.
The odihragent process is successfully creating the user in OID and populates the last name and the last 4 digits of the SSN in OID. According to an open SR I have with Oracle, we cannot use the odihragent process to set the initial password because any time the employee record is updated, the synchronization process will reset the password to last name + SSN. They have recommended that we use a pl/sql plug-in to set the password using the WHEN_ADD plug-in procedure.
I am new to using OID and plug-ins and the examples provided in the Developer's Guide are limited.
I would like to know if anyone else is using plug-ins or another process to set initial passwords when a user is created? If you are using plug-ins would you be willing to share a code sample?

I am surprised that I have not received any responses... Surely there are others who are experienced with programmatically setting passwords when new users are programmatically created. Does anyone have any pointers on how to best accomplish this?

How to set up passwords for two Comcast email accounts on Mail?

Have Leopard. Cannot set up passwords on Mail for two Comcast email accounts. Does anyone know how to do?

Hi Paul, & a warm welcome!
Lineone
Login
[email protected]
Incoming email (IMAP)
imap.lineone.net
Incoming email (POP3)
pop3.lineone.net
Outgoing email (SMTP)
smtp.lineone.net
What port & Authentication are you using?
Can you login with your credentials in a Browser using the same info?
In Mail's Window Menu, choose Connection Doctor, any red dots for status, if so what is the exact message?
Then click the Show Details button & Check again.
The Password rejection can confuse people since it's a catch all meaning...
This Password, Username, Authentication method... is not recognized on this Port to this Server, or a server end problem.
If using a browser to login via WebMail works it's not Name or Password, but one of the other ones.
The receiving email ports are:
IMAP is port 143
IMAP-SSL is port 993
POP is port 110
POP-SSL is port 995
Outgoing ports are...
SMTP and SMTP-SSL is on ports 25, 587 and 465. Port 587 has to be SSL, and port 465 is enforced TLS-wrapped and is generally used by Outlook users.

How can I set up password-protected Guest account

Hi everyone
I need to set up password-protected guest account. The aim is to get:
a) an account with password. So only authorized person can use it.
b) all changes in this account should be overwritten at log-off, just like Guest account behaves.
So I need either to find a way to set password for Guest, either create a 'normal' account and somehow automate it self-cleaning at logoff.
I tried to run terminal and use
sudo su
passwd Guest
[entering password 123]
Afterwards I can't login as Guest at all. System doesn't ask for a password, nor logs me in.
Thx for any help

This question was asked 2 years ago and still hasn't been answered.
If there is not a way to add a password to guest account, what is the script that get's executed when the Guest account log's off? I can execute that on an account that I create called 'localGuest' or something like that.
I have an enterprising member of my family who has figured out that my computer is exempt from the network curfew and they are using Guest to bypass that. I have since disabled guest; however, I do like using the fresh guest environment to test software development.

For some reason the guest user on my mac book pro has a password and did not set a password on it how do I remove it?

For some reason there a password on the guest user on my mac book pro when I try to login in to for someone to use, I didn't set the password I try to remove it and try disable the guest user but didn't work so don't know what to do please help

Restart the computer (with Parental Controls off) and try again. If there's no change, see below.
If you don't already have a current backup, back up all data, then reinstall the OS.* You don't need to erase the startup volume, and you won't need the backup unless something goes wrong. If the system was upgraded from an older version of OS X, you may need the Apple ID and password you used.
If you use FileVault 2, then before running the Installer you must launch Disk Utility and select the icon of the FileVault startup volume ("Macintosh HD," unless you gave it a different name.) It will be nested below another icon with the same name. Click the Unlock button in the toolbar and enter your login password when prompted. Then quit Disk Utility to be returned to the main Recovery screen.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
If you installed the Java runtime distributed by Apple and still need it, you'll have to reinstall it. The same goes for Xcode. All other data will be preserved.
*The linked support article refers to OS X 10.10 ("Yosemite"), but the procedure is the same for OS X 10.7 ("Lion") and later.

How can I set a password containing punctuation?

I tried this:
alter user <user> identified by <password>;
where <password> has punctuation. I got:
ORA-00922: missing or invalid option
so I quoted the password and got:
ORA-00988: missing or invalid password(s)
How do I set a password that contains punctuation? TIA.

Thank you very much. That worked fine. I think earlier I tried using single quotes instead of double quotes, and single quotes did not work.

How can i set a password when i open mozilla firefox homepage

how can i set username and password to the homepage of mozilla firefox

hello saranghaekijenia, can i ask what you are trying to achieve by setting a password? maybe there is a better way...

How can I set a password for firefox so that everyone have to enter the password before executing firefox

My younger sister executed my firefox just at this afternoon(she originally use IE), and she saw something that can't be seen. How can I set a password for firefox so that everyone have to enter the password before executing firefox?

Also see this for an English version of Profile Password:
*Profile Password: http://nic-nac-project.de/~kaosmos/profilepassword-en.html#PPF
It is an extension to protect the profile with a password, but being an extension that protection can easily be bypassed by starting Firefox in [[Safe mode]].<br />
So do not rely on it.<br />
If you want to protect content then you have to use methods supported by the OS like a separate user account with a password or an encrypted file system.

How can I set a password for my pictures on iPad Air ?

How can I set a password for my pictures on iPad Air ? if anyone have my iPad access mail or something I don't want anyone access my photos so how can I set it up.

You can't set a password for the Photos nor Mail apps, you can only set a passcode for your iPad as a whole (via Settings > Passcode).
There are third-party photo management apps such as Photo Manager Pro which you can copy your photos into from the Photos app (and then delete them from Photos), that app allows you (via its settings within the app) to set a password to access it.
For email you could access your email via a browser (and not have your password stored in the browser), or see if there are any email apps in your country's app store which have a password option

How can I set a password on my Mac Mini so someone else cannot open it and read emails, etc.?

How can I set a password on my Mac Mini? Someone else is reading my emails. I would like to be able to lock it so nothing on it could be seen without a password. Is that possible? How?

So uncheck the automatic login after making sure you know your password and it will require a password on startup.
You can also go into the security preferences and have the machine lock itself once the screensaver is activated. This is sometimes controlled from the screensaver preferences as well.
You could also go nuts and activate multiple users where your name appears in the menu bar. When you walk away from the machine you can use that menu to take you to the "login window", effectively locking your machine.

ATG 10.1.2 . How to set BCC password through CIM?

I'm new to 10.1.2 version, trying to installing and configure it properly to learn it. With CIM I configured and set Publishing, Production and Staging instances.
I ran BCC after installation (http://localhost:8180/atg/bcc) and was prompted for password - admin/admin or merchandising/merchandising set by default in previous ATG versions didn't work in 10.1.
I learned from ATGInstallGuide that there is no default passwords preset in 10.1.2 and I have to set them though CIM. (Or ACC)
Here what is says:
*"Through CIM. During the post-installation setup process, CIM prompts you to set the passwords for the*
*default profiles that your environment requires "*
I do remember I was once asked one for password for merchandising user only, and the password I set didn't allow me into BCC, so probably it was for something else.
Please, advise how to set BCC passwords for default account (admin, merchandising and etc) in CIM? I don't see this option in CIM - I everything in CIM and didn't find it
Just in case there is the list of options CIM provides me after running:
[1] Database Configuration - Done
[2] Server Instance Configuration - Done
[3] Application Assembly & Deployment - Done
[P] Product Selection - Done (Oracle ATG Commerce Reference Store &
ATG-Endeca Integration & ATG Site Administration)
[A] Select Application Server - Done (JBoss)
*[C] Custom CIM Plugin Launcher
I'm still not able to open BCC application
Edited by: 994398 on Mar 17, 2013 5:36 PM
Edited by: 994398 on Mar 17, 2013 5:37 PM

CIM will ask for new passwords when you select Create Schema and Import data. If you have forgotten the pwd given by you, you can reset it.
Check the below threads regarding similar issue.
ATG 10.1.1 BCC -Default password for admin
not able to login into ATG Dyn admin
Cheers
R

TS3554 Tried setting login password on recently returned iMac after Seagate hard drive replaced. No space to type in a password or confirm it appeared so I chickened out and clicked on red dot to shut down window. I did, however, put my name as admin. now

Tried setting login password onto iMac after it returned from Seagate exchange hard drive. Upgraded from leopard, snow leopard and currently upgraded to Lion, so as to have iCloud.Typed my name in as administrator and waited for a space to appear to type in password and confirm it. No space appeared so I shut that window down. Put iMac to sleep and when I returned and tried to access computer, it asks for a password which I did not put in! Now I'm stuffed. Cannot get into computer at all. Help appreciated. I'm not a techno wizard.

Welcome to the Apple Support Communities
Reset the password > https://discussions.apple.com/docs/DOC-4101

I see that many people have already complained about Itunes' backup encryption. I NEVER set a password for it (and the corresponding option is still unticked, as always) yet it asked me for a pwd when I upgraded my 3GS to the 5.0 OS. How to solve this?

I see that many people have already complained about Itunes' backup encryption. I NEVER set a password for it (and the corresponding option is still unticked, as always) yet it asked me for a pwd when I upgraded my 3GS to the 5.0 OS. How to solve this?

To prevent others from reading your mail, don't give them access to your account. If others need to use your computer for some reason, set up personal accounts, or a guest account, and switch to it before allowing them access. This is the simplest, and most effective, method.
Email message files can be read as plain text in TextEdit or any word processor.
To protect your email messages from being viewed by others while in your account, you would have to lock the folder, putting it into an encrypted disk image that required a password to be opened and mounted. You would have to double-click on the image and give your password to mount it before launching Mail then unmount it as soon as you're done. My guess is that you could replace the ~/Library/Mail folder with an alias pointing to the folder on the disk image.
It may work, but it seems like a lot of unnecessary hassle.

Setting a password?

Similar Messages

Maybe you are looking for