Setting defaultPanel Ignores panelHeight=false on load

var Accordion1 = new Spry.Widget.Accordion("Accordion1",{useFixedPanelHeights:false,defaultPanel:1});
So when this page loads the default panel 1 is open correctly but does not have a fixed height. When I go ahead and click on another panel in the accordion, they all resize properly and the panel heights are not fixed.
Now if I use something like Accordion1.openFirstPanel() the first resizes correctly. If I just use the script above and set the defaultPanel to 0 it does not work properly. I can get away with this on the opening panel using an onLoad but if I need to load a page in which it needs to default to the second panel I cannot get it to default with the correct size.
http://faculty.medicine.iu.edu/modules/intro/I.html Heading into this page I run the openFirstPanel which allows the first panel to resize correctly. It would not work if I used the script above set to 0
http://faculty.medicine.iu.edu/modules/intro/II.html Clicking on this link should simply allow the 2nd panel to open and be auto sized. It doesnt. BUT, if you click on any other panel, the accordion acts fine. Why doesnt it like it on load? Is there a script I can run that woudl work like the openFirstPanel but open the second? I cant do the openNext because I don't know where they might be.
Thanks in advance.
Jon

Hi Jon,
Please update to Spry 1.6 as per the suggestion at the top of the discussions page.
Announcement: New to Spry, or the Spry forums?
Hide Details
Before you post a topic please verify that:
You are using the latest Spry files
The latest version of the Adobe Spry Framework is 1.6.1, this is the same version that ships with Dreamweaver CS4. If you use Dreamweaver CS3 (uses Spry 1.4), its wise to upgrade your files to the latest version. This can easily be done using the Spry Updater that can be found here.
Hopefully this will help.
Ben

Similar Messages

How do I turn off searching from the address bar. Setting keyword.enabled to false is not working.

I never want to search from the address bar. I've been able to turn off this horrible annoying feature in the past by setting "keyword.enabled" to false but this no longer seems to work. Is there any way to fix this so that searching from the address bar never happens with any search engine?

If you set keyword.enabled to false, then what Firefox normally does is check whether your address bar entry is a valid server name (first DNS lookup) and, if not, it will try fixup (e.g., www.+''what you typed''+.com) (second DNS lookup).
If you get search results, particularly if you get results from some site other than your preferred search engine, there are two possible explanations:
(1) DNS provider hijack.
There are some service providers that do not answer the DNS lookups honestly and instead will divert you to their own page of search results. In that situation, there sometimes is a link on the page to opt out, either right there, or behind an explanation (why do I get this page?) or a settings link. You may have to look around. Or if your service provider won't let you opt out, you might need to switch to using OpenDNS or Google Public DNS.
You probably should also check your connection setting it case that has been modified:
"3-bar" menu button (or Tools menu) > Options > Advanced > Network mini-tab > "Settings" button
Try "No proxy" here to see whether that helps.
(2) Bad add-on.
Some extensions will divert honest DNS misses to their preferred search site. Here's what I suggest for cleaning out bad add-ons:
(A) Open the Windows '''Control Panel''', Add/Remove Programs. After the list loads, click the "Installed on" column heading to group the infections, I mean, additions, by date. This can help in smoking out undisclosed bundle items that snuck in with some software you agreed to install. Take out as much trash as possible here.
(B) Then, in Firefox, open the '''Add-ons page''' using either:
* Ctrl+Shift+a
* "3-bar" menu button (or Tools menu) > Add-ons
In the left column, click Plugins. Set nonessential and unrecognized plugins to "Never Activate".
In the left column, click Extensions. Then, if in doubt, disable (or Remove, if possible) unrecognized and unwanted extensions.
Often a link will appear above at least one disabled extension to restart Firefox. You can complete your work on the tab and click one of the links as the last step.
(C) Search for remaining issues with the '''scanning/cleaning tools''' listed in our support article: [[Troubleshoot Firefox issues caused by malware]]. Note that the tools are free and take considerable time to run. If they seem to finish quickly and then ask for payment, you might have a Fake AV infection. Please use the specialized forums listed in the article in that case.
Success?

Applescript: set display alert to false

I am opening excel file with application "Numbers" and I receive the document warning alert box. I wish to ignore (set to false) these warning alerts. I've scripted:
tell application "Numbers"
set display alert to false
(more stuff)
end tell
...but I get a compile error on line 2
please help. thanks

I have looked through the Numbers Applescript dictionary and dont see any property called "display alert" taht can be set to false.
I know that property works in Excel, however i dont think it exists in numbers.
not sure how to accomplish this.
Jason

New Icloud Terms and Conditions window pops up every time I try to check my email, or when I open setting. My email doesn't load because of this, so I haven't been able to check my email for months.

'New Icloud Terms and Conditions' window pops up every time I try to check my email, or when I open setting. My email doesn't load because of this, so I haven't been able to check my email for months. When I click, 'view terms' it takes me to my Icloud section in settings, but the terms don't pop up. I plugged it into my iTunes to see if it would pop up, but that didn't work either. My phone is updated, and I'm pretty sure I already accepted the new terms and conditions on the last update a few months back.

Hi munaxnight,
If you are having issues with your iPhone continuing to ask you to accept terms and conditions, you may want to try some things to troubleshoot.
First, quit all running applications and test again -
Force an app to close in iOS
Next, I would try restarting and if needed resetting the iPhone -
Restart or reset your iPhone, iPad, or iPod touch
If the issue is still present, you may want to restore the iPhone as a new device -
How to erase your iOS device and then set it up as a new device or restore it from backups
Thanks for using Apple Support Communities.
Best,
Brett L

TS4050 when i want to sign in apple id in icloud from setting , appear a black page and loading .... help me ...

when i want to sign in apple id in icloud from setting , appear a black page and loading .... help me ...

Hello shlomi2890,
To resolve your issue, you would need to change the Apple ID back to what you had originally, sign out and then change it back. Check out the article below for more information.
iOS 7: If you're asked for the password to your previous Apple ID when signing out of iCloud
http://support.apple.com/kb/TS5223
Change your Apple ID temporarily
If signing out and back in to iMessage or FaceTime didn't help, try these steps:
Change your Apple ID to the Apple ID you used previously. You shouldn't need to verify the email address.
Go to Settings > iCloud. Complete these steps only if the Find My [Device] setting is turned on:
Scroll down and tap Delete Account, then tap Delete to confirm.
Tap “Keep on My [Device]” or “Delete from My [Device].” In either case, your data remains in iCloud and will be updated on your device when you sign in to iCloud again.
Enter the password for your previous Apple ID.
Change your Apple ID to the new email address that you want to use. You'll need to verify the email address.
Return to Settings > iCloud and sign in with your new Apple ID.
Regards,
-Norm G.

In Apple Configurator, can I set up different sets of iPads with different apps loaded? Or will all iPads synced with Configurator be required to have the same build?

In Apple Configurator, can I set up different sets of iPads with different apps loaded? Or will all iPads synced with Configurator be required to have the same build?

Hi jshira86,
You can definitely have different sets of iPads with different apps loaded. When you "supervise" your iPads, you will see that on the left side of the Configurator window there is a "+" sign in the lower left corner. Click it to create a new device group. With this new device group you can choose what apps and configuration profiles you want to install on that group of iPads. Create as many groups as you want to customize the apps and profiles you want on them.
Hope this answers your question!
~Joe

Setting geo.enabled to false does not turn it off. Would my Proxy have anything to do with this?

''Duplicate post, continue here - [https://support.mozilla.com/en-US/questions/793677]''
Setting geo.enabled to false does not turn it off. Would my Proxy have anything to do with this?

''Duplicate post, continue here - [https://support.mozilla.com/en-US/questions/793677]''
Setting geo.enabled to false does not turn it off. Would my Proxy have anything to do with this?

Setting geo.enabled to false does not stop websites from knowing location. Seems to be related to my proxy setting.....Any ideas on how to completely disable this?

Setting geo.enabled to false does not stop websites from knowing location. It changes based off of what proxy I am using. Is there a way to completely disable this?

I use Comcast in the Chicago area market and have a problem with the "Opt Out" stopping about once a year or so. It appears as being enabled at the Comcast Opt Out page, but the unresolved addresses are still going to the DNS "domain helper" service.
What works for me is to turn off the opt out preference, log off from that Comcast account, and close Firefox. When I restart Firefox, log in to Comcast, and then set the pref to "opt out" again - it works as intended and doesn't cause me a problem until it happens like 10 to 12 months later.
As far as why it seems to affect browsers in a different way, I have no idea. I do have Safari, Opera, and IE 8 installed, in addition to multiple versions of Firefox, but I don't use those other browsers enough to have seen a difference. I am usually opening pages from within Firefox in those other browsers to view the difference, ''or to print something that Firefox screws up in the Print Preview''.

How to set the bind variable on page load and execute query ?

Hi All,
I am using Jdeveloper 11.1.1.5
I have a table called "Employee"
Columns :- id , name , location
Data :- 1, ,james , chicago
2 ,Raj ,capetown
Now i have another webservice(created as a webservice dataControl) which sends me the "id" on each time my page loads.Now the id which has been returned by webservice should be incorporated in my VO Query as in where clause to fetch the data for the respective "id" in that "Employee" table and should be rendered on form.
Eg :- Id "2" has been sent by the webservice then the record should be fetched from database should be "2","raj","capetown".
I know that there would be necessity of bind variable , but how do i set the bind variable on page load ?
How can i use the bind variable appropriately ??
Please suggest !!!!
Thanks.

Hi,
Check
http://www.orastudy.com/oradoc/selfstu/fusion/web.1111/b31974/web_services.htm#CJADCDBG
http://thepeninsulasedge.com/frank_nimphius/2011/02/18/adf-code-corner-sample-73-released-hands-on-creating-a-search-form-using-a-pojo-ws-and-the-web-service-data-control/
-Suresh

IMessage: "Start New Conversations From" setting is ignored

In my iMessage settings, I have the option set to start new conversations from my email address instead of my phone number. I don't want anyone having my phone number, so this is a VITAL feature for me.
The problem is that the setting is IGNORED! New conversations are in fact coming from my phone number. I have tried changing the setting back and forth, even wiped my phone and started from scratch, and still, new conversations come from my phone number instead of my email address.
How can I get iMessage to acknowledge the setting and start new conversations from my email address?
Thanks!

This worked for me. Turn off iMessage in Settings---> Messages. Then turn off iPhone. Restart iPhone then turn iMessage back on. The phone number should reappear.

How to set dom fidelity to false on an already registered schema

How to set dom fidelity to false on an already registered schema
Thanks
Message was edited by:
uraees

I guess that you will have to annotate the schema via updating schema or inserting the "xdb annotation" to deactivate the DOM fidelity. Reasoning from the most difficult situation that objects (XMLType objects created via registering the schema) are linked to the schema, this is probably not a supported way to do it.
Schema evolution is supported though, this would be the supported way to do it...
Do you have more info (including the database version in use)?

How do i set defaultPanel of two different SpryAccordion CSS Style ?

I use Dreamweaver CS3.
I have placed two different SpryAccordion CSS Style in one
page.
one is Accordion1 and one is Accordion2.
I want to set defaultPanel of Accordion1 to 2 and i want to set
defaultPanel of Accordion2 to 6
Help me please ?
Thank you.

Move them from one library to the other, or click here and follow the instructions.
(100046)

I set Application.Visible is false,but Toolbar still Visible

I set Application.Visible is false, the window of PS will hidden.
But when I run an action the toollbar will showon, that looks strange.
Is anybody konw how to hidden the toolbar?

I am having the exact same issue and searching Google for an answer doesn't help. Please let me know if you figure out a way to hide the toolbar/palette.

How to set defaultPanel from XML

Hi Everyone, I'm using Spry Accordion as a menu and im
loading the data from an xml file, the problem is if I try to set
the defaultPanel to anything else besides "0" like the following
<script type="text/javascript">
var Accordion1 = new Spry.Widget.Accordion("Accordion1",
{defaultPanel: 5});
</script>
It only highlights the panel and doesn't open
Can anyoyne please tell me what I'm doing wrong
here's the source code
XML
===================================================
<?xml version="1.0" encoding="utf-8"?>
<NewDataSet Strategic="1">
<Content>
<IdMenu>1</IdMenu>
<Menu>Introduction1</Menu>
<SunMenu1>SUB1</SunMenu1>
<Link1>Link 1</Link1>
<Link2>Link 2</Link2>
<Link3>Link 3</Link3>
<Link4>Link 4</Link4>
<Link5>Link 5</Link5>
<URL1>URL1</URL1>
<URL2>URL2</URL2>
<URL3>URL3</URL3>
<URL4>URL4</URL4>
<URL5>URL5</URL5>
</Content>
<Content>
<IdMenu>2</IdMenu>
<Menu>Introduction2</Menu>
<Link1>Link 1</Link1>
<Link2>Link 2</Link2>
<Link3>Link 3</Link3>
<URL1>URL1</URL1>
<URL2>URL2</URL2>
<URL3>URL3</URL3>
</Content>
<Content>
<IdMenu>3</IdMenu>
<Menu>Introduction1</Menu>
<SunMenu1>SUB1</SunMenu1>
<Link1>Link 1</Link1>
<Link2>Link 2</Link2>
<Link3>Link 3</Link3>
<Link4>Link 4</Link4>
<URL1>URL1</URL1>
<URL2>URL2</URL2>
<URL3>URL3</URL3>
<URL4>URL4</URL4>
</Content>
</NewDataSet>
===================================================
HTML
==================================================

<div spry:region="strategic1">
<div id="Accordion1" class="Accordion" tabindex="0">

<div spry:repeat="strategic1" class="AccordionPanel">
<div
class="AccordionPanelTab">{strategic1::Menu}</div>
<div class="AccordionPanelContent">
<ul>
<li spry:if=" '{strategic1::Link1}' != 'undefined' "
class="SubMenu"><a href="{URL1}"
class="SubMenu">{Link1}</a></li>
<li spry:if=" '{strategic1::Link2}' != 'undefined' "
class="SubMenu"><a href="{URL2}"
class="SubMenu">{Link2}</a></li>
<li spry:if=" '{strategic1::Link3}' != 'undefined' "
class="SubMenu"><a href="{URL3}"
class="SubMenu">{Link3}</a></li>
<li spry:if=" '{strategic1::Link4}' != 'undefined' "
class="SubMenu"><a href="{URL4}"
class="SubMenu">{Link4}</a></li>
<li spry:if=" '{strategic1::Link5}' != 'undefined' "
class="SubMenu"><a href="{URL5}"
class="SubMenu">{Link5}</a></li>
</ul>
</div>
</div>
</div>

<script type="text/javascript">
var Accordion1 = new Spry.Widget.Accordion("Accordion1",
{defaultPanel: 5});
</script>

</div>

<script type="text/javascript">
var strategic1 = new Spry.Data.XMLDataSet("Strategic.xml",
"NewDataSet/Content");
//-->
</script>
============================================================
Thanks in advance

<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0
Transitional//EN" "
http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">

<html xmlns="
http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html;
charset=iso-8859-1" />
<title>Spry Accordion</title>
<script language="JavaScript" type="text/javascript"
src="includes/SpryAccordion.js"></script>
<script language="JavaScript" type="text/javascript"
src="includes/xpath.js"></script>
<script language="JavaScript" type="text/javascript"
src="includes/SpryData.js"></script>
<link href="includes/SpryAccordion.css" rel="stylesheet"
type="text/css" />
<script type="text/javascript">
var strategic1 = new Spry.Data.XMLDataSet("data/data.xml",
"NewDataSet/Content");
var observer = { onPostUpdate: function(notifier, data) { var
a2 = new Spry.Widget.Accordion("Accordion1" , {defaultPanel: 1}); }
Spry.Data.Region.addObserver("strategic1Region", observer);
//-->
</script>
</head>
<body>

<div id="strategic1Region" spry:region="strategic1">
<div id="Accordion1" class="Accordion" tabindex="0">

<div spry:repeat="strategic1" class="AccordionPanel">
<div
class="AccordionPanelTab">{strategic1::Menu}</div>
<div class="AccordionPanelContent">
<ul>
<li spry:if=" '{strategic1::Link1}' != 'undefined' "
class="SubMenu"><a href="{URL1}"
class="SubMenu">{Link1}</a></li>
<li spry:if=" '{strategic1::Link2}' != 'undefined' "
class="SubMenu"><a href="{URL2}"
class="SubMenu">{Link2}</a></li>
<li spry:if=" '{strategic1::Link3}' != 'undefined' "
class="SubMenu"><a href="{URL3}"
class="SubMenu">{Link3}</a></li>
<li spry:if=" '{strategic1::Link4}' != 'undefined' "
class="SubMenu"><a href="{URL4}"
class="SubMenu">{Link4}</a></li>
<li spry:if=" '{strategic1::Link5}' != 'undefined' "
class="SubMenu"><a href="{URL5}"
class="SubMenu">{Link5}</a></li>
</ul>
</div>
</div>
</div>
</div>

</body>
</html>
Checked and worked.
And btw U dont have 5 panels, so u shouldnt set default panel
to 5, while u only have 3 panels :)
Goodluck with your project :)
ofcourse change your datalocation back your's

[SOLVED]laptop suspend when LID close, even set HandleLidSwitch=ignore

i've modify
HandleLidSwitch=ignore
systemctl restart systemd-logind.service
But when close LID, it suspend.
Then i click some key on keybord , it come back.
/var/log/everything:
Mar 21 11:20:59 localhost logger: ACPI action undefined: PNP0C0A:00
Mar 21 11:21:06 localhost dbus-daemon[317]: dbus[317]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.229" (uid=1000 pid=22838 comm="systemctl stop laptop-mode.service ") interface="org.freedesktop.systemd1.Manager" member="StopUnit" error name="(unset)" requested_reply="0" destination="org.freedesktop.systemd1" (uid=0 pid=1 comm="/sbin/init ")
Mar 21 11:21:13 localhost systemd[1]: Stopped Laptop Mode Tools.
Mar 21 11:21:15 localhost logger: ACPI action undefined: PNP0C0A:00
Mar 21 11:21:37 localhost systemd[1]: Reloading.
Mar 21 11:21:37 localhost systemd[1]: /usr/lib/systemd/system-generators/systemd-fstab-generator exited with exit status 1.
Mar 21 11:21:37 localhost [358276.901952] systemd-fstab-generator[22955]: Failed to create mount unit file /run/systemd/generator/tmp.mount, as it already exists. Duplicate entry in /etc/fstab?
Mar 21 11:21:47 localhost logger: ACPI action undefined: PNP0C0A:00
Mar 21 11:22:02 localhost logger: ACPI action undefined: PNP0C0A:00
Mar 21 11:22:23 localhost logger: LID opened
Mar 21 11:22:31 localhost systemd[1]: Starting Sleep.
Mar 21 11:22:31 localhost systemd[1]: Reached target Sleep.
Mar 21 11:22:31 localhost systemd[1]: Starting Suspend...
Mar 21 11:22:31 localhost logger: LID closed
Mar 21 11:22:31 localhost systemd-sleep[23159]: Suspending system...
Mar 21 11:22:32 localhost kernel: [358330.844138] PM: Syncing filesystems ... done.
Mar 21 11:22:32 localhost kernel: [358331.305611] PM: Preparing system for mem sleep
Mar 21 11:22:47 localhost kernel: [358331.412348] Freezing user space processes ... (elapsed 0.02 seconds) done.
Mar 21 11:22:47 localhost kernel: [358331.439427] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
Mar 21 11:22:47 localhost kernel: [358331.452995] PM: Entering mem sleep
Mar 21 11:22:47 localhost kernel: [358331.453150] Suspending console(s) (use no_console_suspend to debug)
Mar 21 11:22:47 localhost kernel: [358331.466400] e1000e 0000:00:19.0: irq 48 for MSI/MSI-X
Mar 21 11:22:47 localhost kernel: [358331.749415] sd 0:0:0:0: [sda] Synchronizing SCSI cache
Mar 21 11:22:47 localhost kernel: [358331.749546] sd 0:0:0:0: [sda] Stopping disk
Mar 21 11:22:47 localhost kernel: [358332.106062] i915 0000:00:02.0: power state changed by ACPI to D3hot
Mar 21 11:22:47 localhost kernel: [358332.242667] PM: suspend of devices complete after 497.619 msecs
Mar 21 11:22:47 localhost kernel: [358332.243146] PM: late suspend of devices complete after 0.473 msecs
Mar 21 11:22:47 localhost kernel: [358332.243658] xhci_hcd 0000:03:00.0: wake-up capability enabled by ACPI
Mar 21 11:22:47 localhost kernel: [358332.269361] ehci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
Mar 21 11:22:47 localhost kernel: [358332.282850] ehci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI
Mar 21 11:22:47 localhost kernel: [358332.309313] PM: noirq suspend of devices complete after 66.169 msecs
Mar 21 11:22:47 localhost kernel: [358332.309974] ACPI: Preparing to enter system sleep state S3
Mar 21 11:22:47 localhost kernel: [358332.310597] PM: Saving platform NVS memory
Mar 21 11:22:47 localhost kernel: [358332.317339] Disabling non-boot CPUs ...
Mar 21 11:22:47 localhost kernel: [358332.320383] smpboot: CPU 1 is now offline
Mar 21 11:22:47 localhost kernel: [358332.323050] smpboot: CPU 2 is now offline
Mar 21 11:22:47 localhost kernel: [358332.325460] smpboot: CPU 3 is now offline
Mar 21 11:22:47 localhost kernel: [358332.327433] ACPI: Low-level resume complete
Mar 21 11:22:47 localhost kernel: [358332.327483] PM: Restoring platform NVS memory
Mar 21 11:22:47 localhost kernel: [358332.328066] Enabling non-boot CPUs ...
Mar 21 11:22:47 localhost kernel: [358332.331542] smpboot: Booting Node 0 Processor 1 APIC 0x1
Mar 21 11:22:47 localhost kernel: [358332.355520] CPU1 is up
Mar 21 11:22:47 localhost kernel: [358332.358971] smpboot: Booting Node 0 Processor 2 APIC 0x2
Mar 21 11:22:47 localhost kernel: [358332.587540] CPU2 is up
Mar 21 11:22:47 localhost kernel: [358332.590984] smpboot: Booting Node 0 Processor 3 APIC 0x3
Mar 21 11:22:47 localhost kernel: [358332.605172] CPU3 is up
Mar 21 11:22:47 localhost kernel: [358332.610534] ACPI: Waking up from system sleep state S3
Mar 21 11:22:47 localhost systemd[1]: Time has been changed
Mar 21 11:22:47 localhost systemd[1]: systemd-tmpfiles-clean.timer: time change, recalculating next elapse.
Mar 21 11:22:47 localhost acpid: client 328[0:0] has disconnected
Mar 21 11:22:47 localhost systemd-sleep[23159]: System resumed.
Mar 21 11:22:47 localhost kernel: [358332.611098] i915 0000:00:02.0: power state changed by ACPI to D0
Mar 21 11:22:47 localhost kernel: [358332.661492] ehci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI
Mar 21 11:22:47 localhost kernel: [358332.688143] ehci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
Mar 21 11:22:47 localhost kernel: [358332.715055] sdhci-pci 0000:01:00.0: MMC controller base frequency changed to 50Mhz.
Mar 21 11:22:47 localhost kernel: [358332.741549] xhci_hcd 0000:03:00.0: wake-up capability disabled by ACPI
Mar 21 11:22:47 localhost kernel: [358332.741712] PM: noirq resume of devices complete after 130.745 msecs
Mar 21 11:22:47 localhost kernel: [358332.743008] PM: early resume of devices complete after 0.206 msecs
Mar 21 11:22:47 localhost kernel: [358332.743043] i915 0000:00:02.0: setting latency timer to 64
Mar 21 11:22:47 localhost kernel: [358332.743146] mei 0000:00:16.0: irq 46 for MSI/MSI-X
Mar 21 11:22:47 localhost kernel: [358332.743195] ehci_hcd 0000:00:1a.0: setting latency timer to 64
Mar 21 11:22:47 localhost kernel: [358332.743215] e1000e 0000:00:19.0: irq 48 for MSI/MSI-X
Mar 21 11:22:47 localhost kernel: [358332.743301] snd_hda_intel 0000:00:1b.0: irq 49 for MSI/MSI-X
Mar 21 11:22:47 localhost kernel: [358332.743481] ehci_hcd 0000:00:1d.0: setting latency timer to 64
Mar 21 11:22:47 localhost kernel: [358332.743508] ahci 0000:00:1f.2: setting latency timer to 64
Mar 21 11:22:47 localhost kernel: [358332.743611] iwlwifi 0000:02:00.0: RF_KILL bit toggled to enable radio.
Mar 21 11:22:47 localhost kernel: [358332.744213] mei 0000:00:16.0: wd: failed to find the client
Mar 21 11:22:47 localhost kernel: [358332.811881] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
Mar 21 11:22:47 localhost kernel: [358332.981624] usb 4-1.2: reset high-speed USB device number 3 using ehci_hcd
Mar 21 11:22:47 localhost kernel: [358333.061455] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Mar 21 11:22:47 localhost kernel: [358333.061936] ACPI Error: [GTF0] Namespace lookup failure, AE_NOT_FOUND (20120913/psargs-359)
Mar 21 11:22:47 localhost kernel: [358333.061944] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.PRT0._SDD] (Node ffff880149a55cf8), AE_NOT_FOUND (20120913/psparse-536)
Mar 21 11:22:47 localhost kernel: [358333.062035] ACPI Error: [GTF0] Namespace lookup failure, AE_NOT_FOUND (20120913/psargs-359)
Mar 21 11:22:47 localhost kernel: [358333.062041] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.PRT0._GTF] (Node ffff880149a55d20), AE_NOT_FOUND (20120913/psparse-536)
Mar 21 11:22:47 localhost kernel: [358333.062591] ACPI Error: [GTF0] Namespace lookup failure, AE_NOT_FOUND (20120913/psargs-359)
Mar 21 11:22:47 localhost kernel: [358333.062599] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.PRT0._SDD] (Node ffff880149a55cf8), AE_NOT_FOUND (20120913/psparse-536)
Mar 21 11:22:47 localhost kernel: [358333.062690] ACPI Error: [GTF0] Namespace lookup failure, AE_NOT_FOUND (20120913/psargs-359)
Mar 21 11:22:47 localhost kernel: [358333.062696] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.PRT0._GTF] (Node ffff880149a55d20), AE_NOT_FOUND (20120913/psparse-536)
Mar 21 11:22:47 localhost kernel: [358333.062739] ata1.00: configured for UDMA/100
Mar 21 11:22:47 localhost kernel: [358333.074899] sd 0:0:0:0: [sda] Starting disk
Mar 21 11:22:47 localhost kernel: [358333.246448] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
Mar 21 11:22:47 localhost kernel: [358333.253820] iwlwifi 0000:02:00.0: Radio type=0x0-0x0-0x3
Mar 21 11:22:47 localhost kernel: [358333.391539] restoring control 00000000-0000-0000-0000-000000000101/0/2
Mar 21 11:22:47 localhost kernel: [358333.391541] restoring control 00000000-0000-0000-0000-000000000101/1/3
Mar 21 11:22:47 localhost kernel: [358333.391543] restoring control 00000000-0000-0000-0000-000000000101/2/6
Mar 21 11:22:47 localhost kernel: [358333.391544] restoring control 00000000-0000-0000-0000-000000000101/3/7
Mar 21 11:22:47 localhost kernel: [358333.391545] restoring control 00000000-0000-0000-0000-000000000101/5/9
Mar 21 11:22:47 localhost kernel: [358333.693001] PM: resume of devices complete after 950.103 msecs
Mar 21 11:22:47 localhost kernel: [358333.694210] PM: Finishing wakeup.
Mar 21 11:22:47 localhost kernel: [358333.694214] Restarting tasks ... done.
Mar 21 11:22:47 localhost kernel: [358333.706265] video LNXVIDEO:01: Restoring backlight state
Mar 21 11:22:47 localhost logger: ACPI action undefined: PNP0C0A:00
Mar 21 11:22:47 localhost acpid: client connected from 328[0:0]
Mar 21 11:22:47 localhost acpid: 1 client rule loaded
Mar 21 11:22:47 localhost systemd[1]: Started Suspend.
Mar 21 11:22:47 localhost systemd[1]: Service sleep.target is not needed anymore. Stopping.
Mar 21 11:22:47 localhost systemd[1]: Stopping Sleep.
Mar 21 11:22:47 localhost systemd[1]: Stopped target Sleep.
Mar 21 11:22:47 localhost systemd[1]: Starting Suspend.
Mar 21 11:22:47 localhost systemd[1]: Reached target Suspend.
Mar 21 11:22:50 localhost logger: ACPI action undefined: PNP0C0A:00
Last edited by whille (2013-03-21 05:26:24)

You are still using acpid. That is triggering the suspend, not logind.
Edit: Also use [ code ] [ /code ] tags (without the spaces) for things like your logs. Hit the "quote" button if you are more of a visual learner.
This is how you use code tags.
Last edited by WonderWoofy (2013-03-21 03:38:53)

Setting defaultPanel Ignores panelHeight=false on load

Similar Messages

Maybe you are looking for