Setting different colours for different cells in a list

Hi,
I was wondering if we could select two cells in a list and have two different colours for each of them.
For example, if i select the 1st and 9th cells in a list, can i have the first one to be green and the 9th one to be red?

HI,
Pls check this.
http://forums.adobe.com/message/2216445#2216445
It is for the datagrid but you can made similarly for the List. Let me know if you have any issue.
with Regards,
Shardul Singh Bartwal

Similar Messages

  • BEx Analyser: How can I define colours for different levels of a hierarchy?

    Hi everyone,
    I have a report in BEx Anaylser that includes a hiearchy of 9 levels.
    For a better overview, I want to define different colours for the cells of each level. In this way, the user should be able to see which numbers belong to which hierarchy level. How can I do this?
    Best regards
    Daniel

    Dear Anujit,
    Thanks for your answer.
    Seriously? I cannot do this with BEx Analyzer other than using Excel VBA macro?
    Cheers, Daniel

  • Different colours for accordion

    I would like to be able to have different accordion panels in
    my site, each using colours relevant to the page topic. So, for
    example, all pages about our services would use a green font, all
    pages about our research department would use red and so on. I can
    adjust the CSS colour scheme but don't know how to apply a
    different set of colours for other accordions as they all seem to
    pick up from the main CSS.
    If it's really simple to do this, please could someone tell
    me how. I'm a novice so idiot-proof instructions are necessary!
    Many thanks.

    Hi Bagheera:
    This is a simple trick, but it will need some extra job for
    you (it's all
    CSS, so don't be afraid)
    I think you have two options:
    1.- Create different CSS files using the original one
    provided by Spry as a
    template: You should change the values as desired. This way,
    pages about
    services would load spry_services.css, pages about research
    would use
    spry_research.css and so on.
    2.- Add a class to the body tag and change the css selectors:
    you can use a
    single css file where you must duplicate the original
    selectors (.eg:
    accordionPanelTab should become .services .accordionPanelTab,
    .research
    .accordioPanelTab... and you can change the properties
    there).
    The former is a good choice if you want to have you css code
    and files as
    clear as possible; the latter will work ok with DW templates
    HTH
    Andres Cayon
    Spain Adobe Dreamweaver User Group
    http://www.dwug.es
    "Bagheera62" <[email protected]>
    escribió en el mensaje de
    noticias news:gmcagc$b3u$[email protected]..
    >I would like to be able to have different accordion
    panels in my site, each
    > using colours relevant to the page topic. So, for
    example, all pages about
    > our
    > services would use a green font, all pages about our
    research department
    > would
    > use red and so on. I can adjust the CSS colour scheme
    but don't know how
    > to
    > apply a different set of colours for other accordions as
    they all seem to
    > pick
    > up from the main CSS.
    >
    > If it's really simple to do this, please could someone
    tell me how. I'm a
    > novice so idiot-proof instructions are necessary!
    >
    > Many thanks.
    >

  • How can i apply different color for each cell in jlist component?

    hi guys i need your help and sorry if my english is very bad..guys how can i apply different colors for each cell in jlist component? for example for the first cell i want to apply color blue, for the second cell i want red, etc... i need your answer guys tnx..
    Edited by: ryrene on Mar 21, 2010 12:13 AM

    ryrene wrote:
    hi guys i need your help and sorry if my english is very bad.
    ..guys how can i apply different colors for each cell in jlist component? for example for the first cell i want to apply color blue, for the second cell i want red, etc... i need your answer guys tnx..I'll see your tnx, and raise you dve bmbrs & nplm.

  • How can i set different font for different tabs/pages

    I want to set different fonts for different tabs/pages?
    is it possible to do the same? If yes how?
    I can change the fonts under tools>options>contents>advanced. but that changes global settings.
    tried some add ons too- but that too changes the global settings.
    some pages like tweetdeck do not display icons etc properly under custom fonts.
    when i check "allow pages to select their own font" tweetdeck shows up fine but a number of other pages show fonts that are too big or some non standard fonts.
    Is there a way where i can select site default fonts for some sites/tabs, and custom fonts for other sites/tabs?
    otherwise i have to open different sites in different browsers- say i use my custom fonts- which apply globally, and open tweetdeck etc in Internet Explorer or Chrome etc. if i can have all tabs in one window/browser, that would be great.

    It's not a built-in feature to override a page's styles on a tab-by-tab or site-by-site basis, but perhaps someone has created an add-on for this?
    It also is possible to create style rules for particular sites and to apply them using either a userContent.css file or the Stylish extension. The Greasemonkey extension allows you to use JavaScript on a site-by-site basis, which provides further opportunity for customization. But these would take time and lots of testing to develop and perfect (and perfection might not be possible)...
    Regarding size, does the zoom feature help solve that part? In case you aren't familiar with the keyboard and mouse shortcuts for quickly changing the zoom level on a page, this article might be useful: [[Font size and zoom - increase the size of web pages]].

  • How to set different header for different Standard report page

    How to set different header for different Standard report page

    Hi,
    A easy answer would be use the 'set report header text.vi' but maybe you are talking about something else ?

  • How to set different icons for different windows which is seen in the top left corner?

    Hi
    How to set different icons for different windows which is seen in the top left corner? I know when building exe there is a option to edit icons or add icons and that icon is default for all the windows in the project. But i want different icons for different windows which is possible in VB.
    Is there any way to set icon by calling any dlls.
    Thanks & Regards
    Samuel J
    [email protected]

    Hi Sam,
    no problem. See the attachment.
    Mike
    Attachments:
    TestIcon_LV85.zip ‏44 KB

  • HT1495 Can I set my iPad for different users? ie user - 1 login & user - 2 login

    Can I set my iPad for different users? ie user - 1 login &amp; user - 2 login

    Afraid not. The iPad is not intended for multiple users.

  • Can you set different sounds for different incoming email accounts?

    Can you set different sounds for different incoming email accounts? Example, I have multiple email accounts on Mail. I would like the sound for my roadrunner account to be different from my .mac and personal website accounts. Is it possible to configure this or is there a script out there that someone knows about.
    Thanks

    You could choose None in Preferences > General > New Mail Sound and set up a rule for each account in Preferences > Rules as follows:
    If [any/all] of the following conditions are met:
    [Account] [AccountName]
    Perform the following actions:
    [Play Sound] [Sound]
    Problem is, that would cause the sound to be played for junk mail as well — probably not what you want.

  • Different link for each cell on table item

    hello..,
    I have one table item on my WAD template.
    I created Characteristic Structure/Selection for rows and Key Figure Structure/Selection for columns.
    There is a requirement to jump to different report for each cell on that table.
    Is it possible?
    I try to created class "ZCL_MYCLASS" with superclass of "CL_RSR_WWW_MODIFY_TABLE".
    And put some code on HTML as below:
    <P><object>
             <param name="OWNER" value="SAP_BW"/>
             <param name="CMD" value="GET_ITEM"/>
             <param name="NAME" value="TABLE"/>
             <param name="ITEM_CLASS" value="CL_RSR_WWW_ITEM_GRID"/>
             <param name="DATA_PROVIDER" value="DATAPROVIDER"/>
             <param name="MODIFY_CLASS" value="ZCL_MYCLASS"/>
             ITEM:            TABLE
    </object></P>
    For testing purpose, I put coding on CHARACTERISTIC_CELL method:
    if I_CHAVL = 'Revenue'. "This is selection description
    c_cell_content = 'R_e_v_e_n_u_e'.
    endif.
    But, it seems that it doesn't work.
    The question:
    1. How do I create simple MODIFY_CLASS, just for testing purpose that what I modify in class is already correct.
    2. How to debug class on WAD?
    Thanks in advance

    Not statically, but you can do this in code:
    That's a method on the left and a property on the right.
    I don't know if this will work as you expect (it should change the tip strip, but I don't know if it will appear like you want it to), so you can also implement this yourself by having a string indicator which you show and move around using its properties.
    Try to take over the world!

  • How do I configure my iPhone to show different colours for my two calendars both from separate email accounts, both Exchange.

    How do I configure my iPhone to show different colours for my two calendars both from separate email accounts, both Exchange.

    It does so by default... what's the issue?

  • Setting different resolutions for different displays?, setting different resolutions for different displays?

    Hi,
    I have a 30" dell display that I have used with my MBP. I recently got a MBA and installed mountain lion.  One of the things they inexplicably removed was the ability in the menu bar to set different resolutions for different displays. The only way I can get my Dell Monitor to work is to use mirroring. But I don't want mirroring. I want two separate displays.  In Snow Leopard, the drop down display menu in the menu bar allowed you to pick different resolutions for different displays. Is there any possible way to do that in Mountain Lion?
    Tom

    Yes, assuming that the 8" display has a resolution that the Mac can support. When you open the Displays system preference, you'll get a settings window on each display (as long as the option for Mirroring isn't checked).
    Regards.

  • Help needed - setting password policies for different types of accounts

    Hello,
    We have a situation where we have different types of users created on a solaris server. We have regular users, admins, functional accounts and device accounts. Of course solaris does not differentiate between regular user and other types, i think. The default password policy applies to all the users on the server. I want to configure different policy for different types of user accounts. Is it possible? The difference between the accounts on our side is
    Regular user accounts - 8 digit numbers ( 00667265) - expire password every 90 days
    Functional accounts - 8 digits starting with F ( F0253466) - do not expire, but password length must be 10-12 and complex
    Device Accounts - 8 digits starting with Z ( Z2367249) - do not expire, but password length must be 12 and complex - like upper case, lower case, number, special chars etc.
    Is it possible to set up different password policies, is so how?

    The password expiration policy is pretty easy, it can be set on a per account basis when the account is created. I'm not aware of a simple way to define a complexity policy for groups of accounts but the policy is enforced using pam, so you should be able to write a pam module which would enforce your complexity policy. The pam manual page would be a reasonable starting point for learning about pam.

  • How can we assign different colours to different records(line items) in alv

    how can we assign different colours to different records(line items) in alv reporting?

    Hi Friend,
    Please see this SDN Wiki  for setting the color in ALV :[http://wiki.sdn.sap.com/wiki/display/ABAP/ABAP-DevelopingInteractiveALVReportusing+OOABAP]
    There are so many SDN Wiki's on this  just try with search  Alv Color display in SDN,
    Regards,

  • One thing I miss is being able to have different "vibrates' for different events.

    One thing I miss is being able to have different "vibrates' for different events. My BB 9700 allowed me to set short/medium/long lengths and one/two/three vibrates. It would be great to get these back on the BB Z10 again.

    All BB needs to do is offer the same notification functionality they had in OS 7.1 (I say 7.1 as they gave you control over the LED colour as well which was great), and it would be perfect.  Notifications on every other platform pail in comparison to what my 9900 could do (and unfortunately the Z10 is included in that list).
    I know it is a new OS but it isn't likey they don't know what they need to offer.
    Hopefully it comes sooner than later as this is one of those 'key' BlackBerry experiences which has been lost as part of the 'upgraded' OS.
    BB-past: 9000>9700>9800>9780>9810>9900>Z10>Q5

Maybe you are looking for