Setting Initial Values in Sharpening Panel

I have found that one of the reasons that LR3 Process 2010 sharpening seems to be a problem is that the initial values in the Sharpening panel in Develop has a setting of 50 for Detail. Aside from the fact that the Detail adjustment isn't even available in LR2, I have found that a setting of 50 almost always gives a "crinkle" effect (for want of a better term) clearly visible at 100%. This can usually be correct by lowering the Detail value, often to 0.
Is there a way to preset the Sharpening values (currently Level 0, Radius 1.0, Detail 50, and Mask 0 -- at least as I'm seeing it) to my own preferred settings? Seems to me it may be related to camera-specific presets, but I can't find anything (yet). For example, I'd like mine set to 25,1.0,0,0. Or, am I completely missing something here?
dds

Default settings are set by camera model, so you can have as many different default settings as you want. Additionally, the dialog box that appears when you set camera raw defaults has a button to enable you to restore the Adobe Camera Raw defaults.
Visual360photography wrote:
Hey, I have three cameras and when I click set default, it shows what camera the picture was taken. So my question is what happen to the other two cameras that I have. Especially when it say that this action is not undoable.
Thanks.

Similar Messages

Query to set initial values

Hi all,
Is it possible to use queries to set initial values or change existing values? For example, we are adding in a new sales employee that will be our sales rep for customers in a certain area. Would it be possible to run a query that would set the Sales Employee field in the BP Master Data as this new sales rep if the customer is in that area? If yes, what is the general process for using queries to set values in this manner (we have other things we would like to use this for as well, if its possible)?
Thanks for the help

Hi Todd,
The best way to tackle this is probably to use a query to extract the business partners you wish to update and then use the Data Transfer Workbench to update the Business Partners in question.
You could also add a Formatted Search to the Business Partner screen so all new Business Partners default to the correct Sales Person based upon territory/address or whatever criteria you like.
Cheers,
Sean

Problem setting initial value for LOV

Hello, everyone. This seems like it should be simple, but it's giving me lots of problems. I am trying to create my first LOV. I have a messageLovInput item called PFedFilingStatus. From the Property Inspector, I can set an Initial Value of "02", which displays when I run the page, and lets me change it and validate it using the associated LOV.
What I would rather do is set the initial value programmatically, but here are my problems:
If I set the value like this:
OAMessageLovInputBean lovText = (OAMessageLovInputBean)pageLayout.findIndexedChildRecursive("PFedFilingStatus");
lovText.setText("02");
then the field displays properly at run time, but can't be changed. The LOV runs, but any value I select flips back to "02"
If I set the value like this:
lovText.setDefaultValue("02");
then nothing seems to happen at run time. The value is not displayed at all.
Can anyone tell me what I am doing wrong? Thanks for your help.
--Dave

Yes, that helps a bunch. Now can you tell me where that is set?
Thanks so much.
--Dave

Setting initial values on structures

I have written a middle-ware wrapper which allows me to call a SAP RFC from SQL Server stored procedures. I am upgrading it from the DCOM to the .Net connector so I can run it on Windows 2003 Server.
When I set a string value (SAP C type) to initial I get the error "Object reference not set to an instance of an object." raised in the proxy object. This error does not happen for non-initial values, and also does not happen on my development workstation. It happens if I set the string to "" or to " ". It occurs on two servers - Windows 2000 and Windows 2003.
I can't figure out how to debug this, and can't find anything in this forum or on SAP Notes. Has anyone else found this error?

A clear head in the morning makes all the difference. There was no problem with the .Net Connector.
The problem lay with SQL Server's sp_OAMethod procedure, or possibly in the .Net component's CCW. If you pass an empty string in as an argument, your component gets a Nothing. I therefore fixed it in the component with:
If Value Is Nothing Then Value = ""
Thanks,
Derek

Set initial value based on query

Is it possible to set the initial value of a field based on a query. Kindly advice.
Regards,
Careen

Hi,
Yes. You can create a VO for your query and map that to the field on your page. Then execute the VO in PR method.
Or if the field is not based on VO, you can execute your query in PR method using PreparedStatement. Then get the handle of the field and set its value to the value returned in resultSet of the query.
--Sushant

Vl31n set initial values

Hello,
I donu2019t have very much experience in abap, so I will ask you to help me. I need to fill the the purchase order and the vendor field from vl31n transaction - initial screen with some values. Can you suggest me an user-exit, a badi or something else to solve my problem? I mention that I never worked with badi or user-exits, so I will appreciate any details about this and how is used..
Thanksu2019

I assume you want to call the transaction from within another abap program and populate the entry fields on the selection screen ?
Generally for any transaciton, if you place the cursor in the input field and press F1 you will get the help. From here if you select the technical help you will see information about the field.
On here there is a parameter id field, showing BES for Purchase order number and LIF for Vendor.
You can then use SET PARAMETER ID to set the values for these two IDs and they will appear when the transaction is then called.

IDOC CLFMAS set initial values

Hi,
I am using IDOC CLFMAS02 to update values in material classification. I do not have problems with modify a normal value. But I want to set a date classification value to initial. If I inform with ' ' the value is showed as '00.00.0000', but I need that this value become initial.
I am trying to use field MSGFN = 003 (delete) on segment E1AUSPM but it does not running.
The FM that we use to input idoc is IDOC_INPUT_CLFMAS.
Any suggestion. Thanks¡¡¡¡

Yes I try to remove date characteristic from E1AUSPM.
Also I try to set blank value.
Also I try with MSGFN value = 003.
I think that your code is only to delete values from multiple-values characteristics.
TEST 1 ( set blank)
Current Material characteristic value: 01.01.2011
Objective Material characteristic value: Blank
E1OCLFM                     004MARA      00000XXXXXXXXXXXXX                           001OMARA
    E1KSSKM                     004ZCLAS                                 1
    E1AUSPM                     004Z_CHARACTERISTIC
    E1DATEM                     004
Result Material characteristic value: 00.00.0000
TEST 2 (MSGFN 003)
E1OCLFM                     004MARA      00000XXXXXXXXXXXXX                           001OMARA
    E1KSSKM                     004ZCLAS                                 1
    E1AUSPM                     003Z_CHARACTERISTIC                        01.01.2011
    E1DATEM                     004
OR
E1OCLFM                     004MARA      00000XXXXXXXXXXXXX                           001OMARA
    E1KSSKM                     004ZCLAS                                 1
    E1AUSPM                     003Z_CHARACTERISTIC
    E1DATEM                     004
OR
E1OCLFM                     003MARA      00000XXXXXXXXXXXXX                           001OMARA
    E1KSSKM                     003ZCLAS                                 1
    E1AUSPM                     003Z_CHARACTERISTIC                         01.01.2011
    E1DATEM                     003
OR others...
The problem is that characteristic must be defined to DATE format and when I set blank value, inside code is converting to 00.00.0000

Set initial value using SQL

Hi,
How do I set the 'initial value' property of a default value using an SQL statement?
Any help appreciated,
Rob

Hi Kevin,
you are right. It is sometimes confusing for the users, but it is - as you said - like setting the initial value, of course you can do some more complexity there.
One big problem is. If you want to set the initial values in a detail record of a master-detail relatioship depending on the master-record, you CAN'T use it. If you change the master record to a record which doesn't have a detail, the WHEN-CREATE-RECORD trigger fires before the master-record really changes. That means, the detail will be initialized with data from the old master-record (the one you were in, before changing the master record). Stupid thing.
I never tried the WHEN-DATABASE-RECORD trigger, I even don't know how it works. I think I have to check what it is doing.
Regards,
Torsten

Set initial value in a DD table

Hi,
I want set initial/default value in a column when create a table by Tcode se11.
please help me.
thanks.

Hi,
You can do this using the Events in table maintenance generator,
When you save an entry in table using SM30 or any other transaction, the default values get saved in the table along with the other entries...for instance you can disable the fields for input on SM30 for the fields where you want to default values...so that user cant enter values in table entries creation.
To access events: SE11->Table maintenance generator->
On the table maintenance screen->Menu->Details->Modifications->Events.
Events: 01- Before save(Do F4 help for more events available)
Routine: <give form name where you add code to default value on screen field>
For more information on events you can search SDN
Hope this helps you
Regards
Shiva

Set initial value for numerical control

Hello LV users,
I have a VI that is used to initialize some experimental equiptment. It passes on a cluster of ten or so numerical control DBL integers as parameters. Everytime I open the programe the values are reset back to zero and I have to enter the values back in. Is there any way to set default values for the controls so I do not have to change them everytime I open the program.
Thanks
Solved!
Go to Solution.

Wowden,
If you want to set default values for multiple numeric control's in your cluster in one go,
-Type in the desired default values
- Right click on your cluster, browse to 'data operations'
- Choose 'Make current values default.
Similarly, if you need to set defaults for multiple clusters or multiple controls on your front panel,
- Choose 'Edit' in the menu
- Choose "make current values default' (This sets defaults for all controls/constants etc. in one go)
RaVI

To set Initial value at run time

Hi all,
i am working in forms.There is a poplist with 3 elements.Forms will be open for two different user. 1st user able to see only one element from the list, So I used Delete_list_element. Now I want to set this value as a default value without select that value because there is a only one element. Is it possible if yes please help me.
Thanx in advance
Sanjit

I think, setting property required=Yes will do the job ...
It is also possible to directly initialize a list item with a value (which should be then content of the actual list).
:BLOCK.LIST_ITEM := VALUE;
or you try something like (after your delete_list, to keep it dynamic) :
:BLOCK.LIST_ITEM := GET_LIST_ELEMENT_VALUE('BLOCK.LIST_ITEM',1);
Message was edited by:
user434854

How to set initial value for a dropdown box?

Hi,
Within Netweaver 2004S (BI 7.0) we use integrated planning. In one of our applications we want to use a dropdown box (created with the WAD) to make a selection possible for a characteristic.
We set up a pre-query to fill the dropdown box (via data binding CHARACTERISTIC_SELECTION) with the proper values. This works fine.
We pass on the choosen entry (via command SET_VARIABLES_STATE) to a second variable that is used in another query. This command is triggered after the user makes a selection in the dropdown box. Also this works fine. After selection of one entry, the output of the second query is limited.
We have the following problem: the first time a blank selection entry is added to the dropdownbox and that no values are passed on to the second query. Because it seems that the user first must choose an entry.
What we would like to do is that one of the found values of the pre-query is automatically selected in the dropdown box and passed on to the second variable (to limit the second query).
I give you an example:
The first query delivers value A, B, and C for the characteristic of the dropdown box.
The first time the dropdown box showns an empty entry, and three additional entries A, B and C. The second query shows all results, because the second variable doesn't receive any value via the command SET_VARIABLES_STATE. The command is not yet triggered.
When you select A, B or C, the command is triggered and the second query shows only results for the choosen entry (this is correct). Now the empty entry has disappeared from the dropdown box. Only the entries A, B and C are left.
Is it possible to set up the dropdown box on such a way (or add some script coding around it) that in the initial show for the dropdown box one of the entries is choosen automatically, so that the empty line is not part of the value set of the dropdown box and that the command connected to the dropdown box (in our case the SET_VARIABLES_STATE) is carried out automatically?
Please, who can help us with this?
Kind regards and thanks in advance,
Marcel.

Hi,
In BW 3.5,say you want to set default for calmonth.
In order to avoid the ALL option from appearing in the dropdown box,
filter infobject 0CALMONTH for DP1 by any valid value.
In the object Data_provider include the lines in Bold:
<object>
<param name="OWNER" value="SAP_BW"/>
<param name="CMD" value="SET_DATA_PROVIDER"/>
<param name="NAME" value="DP1"/>
<param name="QUERY" value="WORKSHOP_CALMONTH_DROPDOWN"/>
<param name="INFOCUBE" value="0D_SD_C03"/>
<<b>param name="FILTER_IOBJNM" value="0CALMONTH"/>
<param name="FILTER_VALUE" value="200401"/></b>
DATA_PROVIDER: DP1
</object>
Hope this helps.
Anu.

No BAPI results when setting initial values

Hi folks,
I have an WD which calls a BAPI and works very well when I set the input parameters via input fields manually.
BUT when I try to set them hard-coded in the wdDoInit method or anywhere else, the BAPI returns nothing, no exception, no items, nothing!
When I uncomment the hard-coded settings, everything works well again.
Any ideas?
Thanks in advance,
Nicolai

Hi Nicolai,
I got through your posting recently .Actually i am new to webdynpro and want some help from you .
In my project i have one custom controller named MgrCust and one view named MgrView .Inside the custom controller there is a method named displayData() from where i have to pass one hard-coded Manager Number (9956) so that data will be displayed in MgrView .There is a value attribute for Manager number i.e ctx_mgrNo
in custom controller as well as in the view and mapping has been done .
I have also done the data binding correctly .
The code which i have written for hard coding is like this .
wdThis.wdGetMgrCust.setctx_mgrNo("9956");
But it's not working . Even i have appended with the initial zeroes but still of no result .
I think the problem lies in my code only .Can you please suggest whether my code is correct or not .If you can give me the exact code then it will be very much useful for me .
Thanks.

How to set the initial value of of a poplist dynamical

Hi,
I've got a poplist that is populated by a recordgroup. This is done by the following pre-form trigger:
DECLARE
     l_query_ok NUMBER;
     l_group_id RecordGroup;
     l_it_id     item;
     l_int_value VARCHAR2(2);
BEGIN
     l_it_id := Find_item('MERGED_ISSUER.product_code');
     l_group_id := FIND_GROUP('RG_PRODUCT_CODE');
     l_query_ok := POPULATE_GROUP(l_group_id);
     -- Populate list 'Product Code'
     CLEAR_LIST (l_it_id);
     POPULATE_LIST(l_it_id,l_group_id);
END;
I've tried to set the initial value by adding following lines to the trigger above but I receive the frm-41084 error. This code assigns the first value of the recordgroup to a hidden text item. In the properties of the poplist the value of the hidden text field is set as initial value.
-- Set initial value
l_int_value := Get_Group_Char_Cell('RG_PRODUCT_CODE', 1);
:MERGED_ISSUER.int_value := l_int_value;
Any help?
thx

Hello Ken,
you can set an initial value for a poplist with the copy command.
You could use a procedure like this:
PROCEDURE P_FILL_LBX
     lbx_ITEM_IN                 VARCHAR2,
     grp_DATA_GROUP_IN VARCHAR2,
     flg_DEL_NULL              BOOLEAN,
     str_WERT_IN               VARCHAR2
) IS
ERROR_ID NUMBER;
BEGIN
CLEAR_LIST(lbx_ITEM_IN);
ERROR_ID := populate_group(grp_DATA_GROUP_IN);
populate_list(lbx_ITEM_IN,grp_DATA_GROUP_IN);
IF flg_DEL_NULL = TRUE THEN
    DELETE_LIST_ELEMENT(lbx_ITEM_IN,GET_LIST_ELEMENT_COUNT(lbx_ITEM_IN));
END IF;
IF str_WERT_IN IS NOT NULL THEN
    COPY(str_WERT_IN,''||lbx_ITEM_IN||'');
END IF;
END;Bernd

Formsbuilder initial-values

can i set initial-values like colors etc in formsbuilder that each form i create has this value?
a.e. if i had a project where all the forms should have a red background-color. i wouldn't have to set it for each form i create.
same thing is for grid-values, fonts etc.
thanks a lot!

I have a skeleton form that I use. It contains all the standard triggers and procedures, along with property classes and visual attributes that are used by all forms in our system.
The property classes use the visual attributes, which are inherited from a reference form. Whenever I create a new field in the form, I set its primary attributes like datatype, size and position on the canvas, then I set its property class. There is no messing with colors and fonts that way.

Setting Initial Values in Sharpening Panel

Similar Messages

Maybe you are looking for