Setting my picture for other's caller id

I used to know how to set my facebook profile picture as my caller id for when I call other people. I cant remember how to do it because when i call anyone with an iphone my same old facebook profile picture comes up on thier screen automatically, how do i fix this?

This is determined/set on the recipient's cell phone, not by your iPhone.

Similar Messages

Can you set a picture for unknown or blocked calls

Is there a way to set a picture for calls that are unknown numbers...not in address book...or blocked calls?
iPhone 4s

Nope.

N97: Can you set a ringtone for all unknown caller...

I just moved to a Nokia N97 from a Palm Treo Pro. So far so good, but one thing I cannot seem to find any information on is whether or not you can set ringtones for all unknown callers, like you can on a palm? This was one of my favorite features for palm phones.
If you cannot set a specific ringtone for all unknown callers on the handset itself, does anyone know of an application I can download that would enable this?
Thanks for your time!
Message Edited by lisadahl on 31-Aug-2009 09:48 PM

While you're waiting for that application. You can put everyone in a group and set specific tones for each group then the default ring tone will sound when unknown people call you
Show your appreciation. Hit that kudos button real hard

How can I set up printer for "Other" sizes of paper? Example 4.5"x12"

Printer HP Deskjet 3050. I have labels on a template for Corel Draw. I can set the 4.5x12 size in the graphic program but can't find the setup for "Other" sizes in the printer setup. It doesn't even cover labels.

I don't know what operating system or driver version you are using but try this:
Click on the Windows Start button and select Control Panel.
In Control Panel, go to Printers.
Right click on your printer and select Printing Preferences
Click on the Features tab.
Look for a Paper Size drop down box. One of the selections should be Custom and you should be able to specify your dimensions there.
I am an employee of Hewlett Packard.
- - Please mark Accept As Solution if it solves your problem so others can more easily find the answer - -
- - Please click the Kudos star if you would like to say thanks - -

How to set the language for a RFC call ?

Hi,
when calling from BSP (WAS620) to our R3 using RFC the results (units, ...) are always in DE. How do the call to get the results in EN?
Language in RFC Destination/Logon&Security does not have an effect.
thx for your support.

Martin,
I am not sure whether this is a logon problem.
If you run the function module in transaction SE37 then you will get PC because there are some exits associated to it.
When you call it from "outside", then the internal value is returned to the caller.
The same happens when using BAPI from languages like Java or .Net
The material field - in particular - is well-known for this behaviour.
Hope someone else could testify because I haven't crossed the problem myself.
Check this thread for instance:
sap.net connector error
If you have a doubt, then set an external breakpoint in the remote system for the RFC user. Then, check the content of the <i>sy-langu</i> field.
Best regards,
Guillaume
Message was edited by:
Guillaume GARCIA

How can I set a breakpoint for a BAPI call in SE37?

Hi,
I am trying to debug a BAPI call from an external system in R/3 4.6C.
In SCM4.1, the SE37 transaction has an aoption under Utilities->Settings ABAP Editor/Debugging tab to activate external debugging. But in R/3 4.6C no such tab exists.
Is there any other way of doing this in R/3 4.6C?
Thanks,
Chris Brookes.

Hi,
Unfortunately I cannot chage the source code of the FM since it is not a development system so I cannot insert a BREAKPOINT statement.
Also, just setting a breakpoint in SE37, even if logged in as the same user who calls the BAPI does not work.
Btw, the call to the BAPI is done via .NET.
It seems that SE37 in R/3 4.6C just doesn't have the same options as in SCM4.1.
Any other ideas?
Thanks,
Chris Brookes.

How to set a timeout for a ws call??

Hi all. I tried looking inside the forum though I couldn't find anything about this, please, if I'm wrong let me know.
The issue is the following, the company has a mainframe that exposes through CICS-SOAP a webservice which is known to be running properly (lets call it WS1). I am developing a second webservice (lets call it WS2) in a WebSphere App Server v6.0 that consumes WS1, does something after getting a result and then sends back to an external client the result as a response to the WS2 request.
Visually, its something like this:
[WS1 - mainframe] <--> [WS2 - WAS] <--> [Client]
WS2 was developed using Rational Software Architect v7.0 by using a Dynamic Web Project, and using the Web Service Client Wizard which creates a client from a remote WSDL, and on the other hand creates a Java class to implement the Web Service.
My only problem now is the fact that I need to control a timeout between WS1 and WS2. I tried using threads but with no good result. Now I absolutely have no idea how to do it. Basically I use the generated proxy to call the WS1 Method from WS2 and that's it, however I need to control that this process doesn't take longer than XX milliseconds.
Could somebody be of any help? That would really be appreciated.

Why not having this control in your server ?.
It should be similar like how a yahoo page is timed out
Regards,
Mukunt

Set background picture for standby screen on E61

Hi,
is there any way I can change the look of the Standby-screen (different background) without installing a complete new theme?
I tried once with a nice jpg I had found on the internet because I was getting bored with the Nokia-blue-spots-or-something-theme: I loaded it into my gallery and the Options menu displayed a submenu "As Background" which I selected. Whew, there it was, very nice. Was there for two days (equivalent to two restarts as I switch off at night), then it was gone...
Tried once more, was there for another two days, then gone.
Any ideas?
Thanks a lot!
Regards,
Hendikoischnur
IT will paint our future - either green or black
* ecosia, the eco-friendly search engine (powered by Yahoo/Bing/WWF);
* Searching for pics online? Try ecocho.eu or treehoo.com
* For those who don´t want to miss Google: Try znout.de - it´s Google running on green energy
* CO2-free chatting: Try Jabber-server.de (running on 100% waterpower)

Try modifying your Nokia theme (or whichever one is current) so the standby screen is your favourite JPG, then hopefully it won't lose the settings so often...you can do this by going into Tools/Themes, choose the current theme, choose edit, then select wallpaper, point at your pic, save etc etc
good luck.

Has anyone been able to set up email for other services? I would like to link to a GoDaddy account. Have all the information but can't get it to work.

I have entered the information from GoDaddy under manual setup and the mail app tells me it cannot connect to the server. It does connect to a gmail account, but that is not helpful. I was wondering if anyone has tried linking to GoDaddy or other account manually and what additional steps it takes.

Actually, I was able to connect to an IMAP account from (German mail provider) posteo.de without problems. Not so with FastMail.fm, which is a much bigger service provider than posteo.de, and also pretty much IMAP standard compliant.
Are there different IMAP configurations (all folders on the same level vs. all folders as subfolders of INBOX) that can influence this? And what can be done to connect FastMail to Firefox OS?

Set picture for non domain users

Hey,
To start I'm running Exchange 2010, not 2013. But am running Office 2013. (So Outlook 2013)
I was wondering if it was possible to set a picture for email addresses that are external.
Like any person email account (yahoo, Hotmail, live, gmail, etc)...
I tried googling but I came up so dry, literally couldn't find a single post about it...

Hi,
To hide this contact from GAL, please right-click on the contact under Recipient Configuration -> Mail Contact.
Then check the box “Hide From Exchange address lists”
Best Regards.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Lynn-Li
TechNet Community Support

Setting OOF for other users using EWS

Hello everyone,
I try to set the OOF for other users using EWS in an Exchange 2010 SP2 environment.
I use this code:
ExchangeService service = new ExchangeService(ExchangeVersion.Exchange2010_SP2);
service.Credentials = new NetworkCredential("username", "password", "domain");
service.TraceEnabled = true;
service.TraceFlags = TraceFlags.All;
service.AutodiscoverUrl("[email protected]");
OofSettings OOFSettings = new OofSettings();
OOFSettings.ExternalAudience = OofExternalAudience.All;
OOFSettings.ExternalReply = "Test";
OOFSettings.State = OofState.Enabled;
service.SetUserOofSettings("[email protected]", OOFSettings);
The account I use is a Service Account our Exchange Team set up. I can see all service properties, so I would assume that the connection to the ExchangeService works fine.
However when SetUserOofSettings executes, I receive a ServiceResponseException “Connection did not succeed. Try again later”.
What am I missing? Unfortunately, the error message does not provide any helpful informations.
Thank you and best regards
Julian

>The account I use is a Service Account our Exchange Team set up. I can see all service properties, so I would assume that the connection to the ExchangeService works fine.
What rights have they given the account, giving an Account Exchange Admin permissions won't give you any rights to access the Mailbox content. For this to work the account you using would need to be either have been granted Full Access via Add-MailboxPermission
or been given Application Impersonation rights (if its the later you need to make sure you use impersonation in your code).
I would suggestion you try using the EWSEditor
http://ewseditor.codeplex.com/ to test this out eg try connecting to the users folders and then try the OOF operation via the EWSEditor option to see if this works.
Other things to check is if this is a Brand new mailbox that has never been connected to before then the Mailbox folders won't be initialized (you can check this using Get-Mailboxstatistics) and you would get an error trying to perform any of
the EWS operations. If it works on some users and not others the possibly your getting throttled.
Cheers
Glen

Set Profile Pictures

We are currently setting up a Sharepoint 2013 environment within our company. We also want our users to benefit from the MySites. In order to keep the stress on the server on launch day at a minimum and to make it easier for the users, we would like to set
a profile picture of each user on their MySite.
Since we have 2000+ users doing this manually isn't really an option. We've been looking for a script that lets us set a picture for each user but haven't been really successful.
In the ideal setting is that we would have a list of all users (CSV file?) and a picture of each user in a folder on one of our Sharepoint servers so they could be imported. Importing pictures from AD for us isn't an option since we don't store pictures
there.
Is there any script or CMDlet that lets us achieve this goal? The closest we have come is displaying a list of users that have (or don't have) a picture associated with them:
# Dynamic Settings
$mySiteUrl = "https://mysite.domain.com"
$findProperty = "PictureUrl"
# Obtain Context based on site
$mySiteHostSite = Get-SPSite $mySiteUrl
$mySiteHostWeb = $mySiteHostSite.OpenWeb()
$context = Get-SPServiceContext $mySiteHostSite
# Obtain Profiles from the Profile Manager
$profileManager = New-Object Microsoft.Office.Server.UserProfiles.UserProfileManager($context)
$AllProfiles = $profileManager.GetEnumerator()
$outputCollection = @()
# Loop through profiles and retrieve the desired property
foreach ($profile in $AllProfiles)
$output = New-Object System.Object
$output | Add-Member -type NoteProperty -Name AccountName -Value $profile["AccountName"].ToString()
$output | Add-Member -type NoteProperty -Name $findProperty -Value $profile[$findProperty]
$outputCollection += $output
# List all Accounts that do not contain the property
$outputCollection | Where-Object {[bool]$_.($findProperty) -ne $false}
(credits for the script go to to
Steve Mann)
Thanks in advance ... and if anything is unclear (english isn't my first language) just ask :-)
Simon ter Veen

There's loads of scripts around that try to do that. This one is my favourite.
http://get-spscripts.com/2010_12_01_archive.html

How can I set a password for my pictures on iPad Air ?

How can I set a password for my pictures on iPad Air ? if anyone have my iPad access mail or something I don't want anyone access my photos so how can I set it up.

You can't set a password for the Photos nor Mail apps, you can only set a passcode for your iPad as a whole (via Settings > Passcode).
There are third-party photo management apps such as Photo Manager Pro which you can copy your photos into from the Photos app (and then delete them from Photos), that app allows you (via its settings within the app) to set a password to access it.
For email you could access your email via a browser (and not have your password stored in the browser), or see if there are any email apps in your country's app store which have a password option

Photos will not allow me to set the key picture for the album or event

Photos will not allow me to set the key picture for the album or event - it is set to grey !
Anyone else had this and found why ?
new PHOTO app replacing iPhoto bugs/ Problems OTHER PROBLEMS :
- no longer has a five star rating system
- my keywords for selecting albums are gone.
- cannot copy location of one photo to another
- cannot have an album with keywords AND rating > a value
- cannot set key photo of album/event
- multi parameter search feature gone
Anyone got any ideas how to get around this terrible downgrade of the software ?
BTW I have just discovered that iPhoto and its' libraries are still there, so I can go back but be left behind and frozen in time on this version if I do.
Photos now take up 700Gb whereas it was 350Gb #@!$#@!@#!@#
Thanks

That are all good points - but Photos is a completely new application. and it is only version 1.
Continue to use iPhoto, girraween; the next update to Photos will probably add a few more features.
iPhoto 9.6.1 is working very well with MacOS X 10.10.3.
The migration let iPhoto installed and also your iPhoto Library will still work with iPhoto.
If you did not uninstall iPhoto, it will still be there in your Applications folder. And if you had updated to the latest version iPhoto 9.6.1 before you upgraded to MacOS X 10.10.3, you can simply drag iPhoto back to the Dock from your Applications folder and continue to use it. Double click iPhoto and confirm, that you want to open iPhoto and not Photos. It is not compulsory to use Photos, while it it still the first release. When you launch iPhoto, you will see a warning, that the iPhoto Library has been migrated to Photos, but simply click the "Open iPhoto" button.The library will still work with iPhoto. ()see: If Photos won't open a library that you already migrated - Apple Support
If your iPhoto version is not iPhoto 9.6.1, you need to update it.
See this User Tip:
Usually it will work to reinstall instead of updating:
Get iPhoto 9.6.1 if you didn't update before OS... | Apple Support Communities
The main idea is to move the iPhoto app to the Trash, so Spotlight does not see it as installed, reload the AppStore, and then to try to download again from the App Store - from your Purchases tab, not from the main page, since you can neither buy iPhoto nor update it, but you can reinstall, if your AppleID is associated with it.
Meanwhile you may want to send a feature request to Apple using the feedback form. Apple - Photos - Feedback
I hope, Apple will listen and add more features to Photos to make it usable for large Photo Libraries.

How to remove the option "Set as default background..." from the right-click menu on a picture, for all users.

Hi! I would like to know if there is any possibility to remove the option "Set as default background..." from the right-click menu on a picture, for all users. I know that's possible to edit userContent.css or userChrome.css, but this concerns only a profile at a time and being in a domain, I would like to set this for all people using Firefox.
Can it be possible to edit a mozilla.cfg file to get the same result?
Thank you in advance for help and tips.

AFAIK then there is no way to do that system wide. You can only do that via userChrome.css or an extension like the Menu Editor per profile .You can install extensions globally, but the user will have to enable them anyway. That is not required for userChrome.css code.

Setting my picture for other's caller id

Similar Messages

Maybe you are looking for