Setting only the TO field on the Created on Field in Selection screen to Current date
Hello,
We have a requirement to Set only the To date in the Created on Field in Selection screen to the Current date, I have tried through Dynamic variable option to set the Date calculation but I am able to see Options to set the Current date to From or From and To Created on Date fields instead of setting the Current date only to To created on Field.
We are in 4.7 and are not supported with user defined variables, Appreciate your inputs on this.
Thanks and Regards
Mohammed Roshan
>
sunitha j wrote:
> Hi ,
>
> It would br gr8..if u could give some more info about the usage of this class..i mean if i hav to implement it in my program....wat is the necessary data that needs to b copied...
>
> Thanx,
> Sunitha
what Text field you want to change.
Since you are working with Dynpros , you have to split the screen in two parts, and one for the Showing differenet fonts and other your normal Dynpro information.
you need to use the Method ADD_TEXT Did you check the program DD_STYLE_TABLE.
Similar Messages
-
Set cursor on error field in selection screen
Hi ALL,
How to place the cursor on a particular selection screen field?I am doing validation if validation fails for a particular field the program should give error mesg and the cursor should place on the error field only but it's going to the Ist field on the selection can somebody tell me how do this? I tried with set cursor field <fieldname) but not working I am doing validations on at-selection screen.
Thanks&Regard
maheshHi chandrasekhar find my code below
this code i am writing under at selection-screen.
*& Form Z_VALIDATE_TVKOV
FORM z_validate_tvkov .
DATA: i_vtweg LIKE vbak-vtweg.
IF NOT s_vtweg-low IS INITIAL.
SELECT SINGLE vtweg FROM tvkov INTO i_vtweg
WHERE vtweg = s_vtweg-low.
IF sy-subrc <> 0.
set cursor FIELD 'S_VTWEG-LOW'.
MESSAGE e000(z_sd) WITH text-052.
ENDIF.
ENDIF.
IF NOT s_vtweg-high IS INITIAL.
SELECT SINGLE vtweg FROM tvkov INTO i_vtweg
WHERE vtweg = s_vtweg-high.
IF sy-subrc <> 0.
MESSAGE e000(z_sd) WITH text-052.
ENDIF.
ENDIF.
ENDFORM. " Z_VALIDATE_TVKOV -
Hi,
I want to add a field in the seletion screen and when the user enters data , it should store in the data base table, the data base table is MKPF-BKTXT, please can any one let me know how to do this... very urgent...Hi
Try to use EXIT_SAPMM07M_001, it's to update the item (not header) text, but you can try to use it:
FIELD-SYMBOLS: <BKTXT> TYPE MKPF-BKTXT.
ASSIGN ('(SAPMM07M)MKPF-BKTXT') TO <BKTXT>.
IF SY-SUBRC = 0.
<BKTXT> = <.....>.
ENDIF.
Max -
How to make the obligate field in selection screen
Hi ,
In my report two radio buttons and two bloc selection screens are there.When we select the first radio button first screen will be editable second screen will be non-editable vice-versa.
but the problem is in each selection screen one mandatory field is required suppose if i give the one field obligatory in first block screen it is not allowing the second readout please help me regarding this how i will make the mandatory field in both screens.
Thanks,
HarinathHi...
Dont Declare your field as OBLIGATORY.
Instead perform the validation in AT SELECTION-SCREEN event. But validation should be only when Particular Radiobutton is selected.
And Generate only Error Message (Type E).
Try this code:
AT SELECTION-SCREEN on <yOUR mandatory field>.
IF PA_UPD = 'X'.
IF <YOUR MANDATORY FIELD> IS INITIAL.
Message 'Entry is must in this field' type 'E'.
ENDIF.
ENDIF.
AT SELECTION-SCREEN OUTPUT.
IF pa_udp = 'X'.
LOOP AT SCREEN.
IF screen-group1 = 'ABC'. "#CCE
screen-active = 1.
ELSEIF screen-group1 = 'DEF'.
screen-input = 0.
ENDIF.
MODIFY SCREEN.
ENDLOOP.
ELSEIF pa_rep = 'X'.
LOOP AT SCREEN.
IF screen-group1 = 'ABC'. "#CCE
screen-input = 0.
ELSEIF screen-group1 = 'DEF'.
screen-active = 1.
ENDIF.
MODIFY SCREEN.
ENDLOOP.
ENDIF.
<b>Reward if Helpful</b> -
Adding the field in selection screen
Hi Guru's,
how can i add the field in selection screen of t code qa33.
can any one help me pls.
Thanks & Best Regards,
Rakhi.You can enhance the standard program RQEEAL10 using implicit enhancement points.
Click the spiral (Enhance) button (Shift + F4)
Go to Edit -> Enhancement operations -> Show Implicit Enhancement Poitns
Create an Enhancement Implementation and include your code there.
See the following link -> Source Code Enhancements - Part 5 of the Series on the New Enhancement Framework
Hope it helps
Neeraj -
Is it possible to rearrange the order of SAP STD Selection Screen?
Hi.
Is it possible to rearrange the order of SAP STD Selection Screen?
Example:
IW69 has Location data selection at bottom of screen.
Is it possible to move that to top of the selection screen?
We are on ECC6.0.
Thank you,
Brett.Hello Brett
You may try to use GuiXT:
[Adjusting Transactions Using GuiXT|http://help.sap.com/saphelp_sm32/helpdata/en/89/91b9db194f11d5b3a30050dae02d7c/content.htm]
Regards
Uwe -
How can I add a new field in selection screen for this report
*& Report ZGS_BARKODLA_HIZLI_GIRIS
report zgs_barkodla_hizli_giris.
tables: mara,
mseg,
mch1,
*mch1,
mkpf,
mchb ,
makt.
type-pools: esp1.
data: i_message_tab type esp1_message_tab_type,
wa_message_tab type esp1_message_wa_type ,
sc_count type i.
ALV
type-pools: slis, kkblo.
data: gs_layout type slis_layout_alv ,
gt_fldcat type slis_t_fieldcat_alv with header line,
gt_header type slis_t_listheader with header line,
gt_sortin type slis_t_sortinfo_alv with header line,
g_repid like sy-repid .
define add-fieldcat.
gt_fldcat-fieldname = &1.
gt_fldcat-ref_tabname = &2.
gt_fldcat-seltext_s = &3.
gt_fldcat-seltext_m = &3.
gt_fldcat-seltext_l = &3.
gt_fldcat-reptext_ddic = &3.
gt_fldcat-ddictxt = 'M'.
append gt_fldcat.
clear gt_fldcat.
end-of-definition.
types: begin of titab,
sel type xfeld,
matnr type matnr,
maktx type maktx,
charg type charg_d,
menge type menge_d,
erfmg type erfmg,
end of titab.
data : witab type titab.
data : itab type table of titab.
data : ok_code type sy-ucomm.
controls: tc_itab type tableview using screen 0100.
data: gv_header like bapi2017_gm_head_01,
gv_code like bapi2017_gm_code.
BAPI export parameters
data: gv_headret type bapi2017_gm_head_ret,
gv_matdoc type bapi2017_gm_head_ret-mat_doc,
gv_matyear type bapi2017_gm_head_ret-doc_year.
data : lv_objek like inob-objek .
data : ls_inob like inob .
data : imseg type ty_t_mseg.
data : wmseg type mseg.
data : answer.
data : count type i.
data : v_atinn type atinn.
BAPI movement details
data: i_goodsmvt_items type bapi2017_gm_item_create occurs 0
with header line.
data: i_return type bapiret2 occurs 0 with header line.
start-of-selection.
call function 'CONVERSION_EXIT_ATINN_INPUT'
exporting
input = 'Z_ORAN'
importing
output = v_atinn.
call screen 100.
*& Module status_0100 OUTPUT
module status_0100 output.
set pf-status '100'.
set titlebar '100'.
mseg-werks = 1000.
mseg-umwrk = 1000.
**added
sc_count = sc_count + 1.
if sc_count eq 1.
mseg-bwart = 313.
endif.
mkpf-budat = sy-datum.
**added
describe table itab lines tc_itab-lines.
endmodule. " status_0100 OUTPUT
*& Module user_command_0100 INPUT
module user_command_0100 input.
data field(20).
data: line_t like sy-index.
data: lines like sy-index.
data line_count like sy-loopc.
data: begin of cols,
screen like screen,
index type i,
selected(1) type c,
vislength like icon-oleng,
invisible(1) type c,
end of cols.
case ok_code.
when 'DELE'.
delete itab where sel eq 'X'.
when 'ENTE'.
check *mch1-charg is not initial.
read table itab into witab with key charg = *mch1-charg.
if not sy-subrc is initial.
witab-charg = *mch1-charg.
select single matnr from mch1 into witab-matnr
where charg eq witab-charg.
if not syst-subrc is initial.
set cursor field '*MCH1-CHARG'.
message e115(12) with *mch1-charg.
endif.
select single maktx from makt into witab-maktx
where matnr eq witab-matnr
and spras eq syst-langu.
witab-erfmg = 1.
concatenate witab-matnr witab-charg into lv_objek .
clear ls_inob .
select single * into ls_inob
from inob
where objek = lv_objek and
klart = '023' and
obtab = 'MCH1' .
select single atflv from ausp into witab-menge
where objek = ls_inob-cuobj and
klart = '023' .
append witab to itab.
**added
clear *mch1-charg.
**added
endif.
when 'SAVE'.
if mkpf-budat is initial.
set cursor field 'MKPF-BUDAT'.
message e055(00).
endif.
if mseg-lgort is initial.
set cursor field 'MSEG-LGORT'.
message e055(00).
endif.
if mseg-umlgo is initial.
set cursor field 'MSEG-UMLGO'.
message e055(00).
endif.
if mseg-bwart is initial.
set cursor field 'MSEG-BWART'.
message e055(00).
endif.
refresh imseg.
loop at itab into witab.
move-corresponding witab to wmseg.
append wmseg to imseg.
endloop.
call function 'ZMM_POPUP_WITH_DATA'
exporting
imseg = imseg
importing
answer = answer.
if answer eq 'Y'.
perform create_goods_movement.
endif.
when 'P--'.
clear ok_code.
perform paging using 'P--'.
set cursor field 'MARA-MATNR' line 1.
when 'P-'.
clear ok_code.
perform paging using 'P-'.
set cursor field 'MARA-MATNR' line 1.
when 'P+'.
clear ok_code.
clear lines.
perform paging using 'P+'.
set cursor field 'MARA-MATNR' line 1.
when 'P++'.
clear ok_code.
perform paging using 'P++'.
set cursor field 'MARA-MATNR' line 1.
when 'SORA'.
read table tc_itab-cols into cols with key selected = 'X'.
if sy-subrc is initial.
field = cols-screen.
field = field+5(10).
sort itab ascending by (field).
endif.
when 'SORZ'.
read table tc_itab-cols into cols with key selected = 'X'.
if sy-subrc is initial.
field = cols-screen.
field = field+5(10).
sort itab descending by (field).
endif.
when 'PRNT'.
perform write_alv.
endcase.
endmodule. " user_command_0100 INPUT
*& Module read_table OUTPUT
module read_table output.
mara-matnr = witab-matnr.
makt-maktx = witab-maktx.
mch1-charg = witab-charg.
mseg-menge = witab-menge.
mseg-erfmg = witab-erfmg.
line_count = sy-loopc.
endmodule. " read_table OUTPUT
*& Module write_table INPUT
module write_table input.
witab-matnr = mara-matnr.
witab-maktx = makt-maktx.
witab-charg = mch1-charg.
witab-menge = mseg-menge.
witab-erfmg = mseg-erfmg.
modify itab from witab index tc_itab-current_line.
endmodule. " write_table INPUT
*& Module exit INPUT
module exit input.
leave to screen 0 .
endmodule. " exit INPUT
*& Form create_goods_movement
form create_goods_movement .
clear : gv_header, i_return[], i_goodsmvt_items[].
gv_header-doc_date = gv_header-pstng_date = mkpf-budat.
gv_header-pr_uname = sy-uname.
GM with reference to reservation
loop at itab into witab.
i_goodsmvt_items-material = witab-matnr.
i_goodsmvt_items-entry_qnt = witab-erfmg.
i_goodsmvt_items-entry_uom = 'ST'.
i_goodsmvt_items-move_type = mseg-bwart.
i_goodsmvt_items-plant = mseg-werks.
i_goodsmvt_items-stge_loc = mseg-lgort.
i_goodsmvt_items-move_plant = mseg-umwrk.
i_goodsmvt_items-move_stloc = mseg-umlgo.
i_goodsmvt_items-batch = witab-charg.
append i_goodsmvt_items.
endloop.
find BAPI processing transaction
if gv_code is initial.
perform determine_bapi_code using mseg-bwart
changing gv_code.
endif.
call function 'BAPI_GOODSMVT_CREATE'
exporting
goodsmvt_header = gv_header
goodsmvt_code = gv_code
importing
goodsmvt_headret = gv_headret
materialdocument = gv_matdoc
matdocumentyear = gv_matyear
tables
goodsmvt_item = i_goodsmvt_items
return = i_return[].
cancel blocking process
loop at i_return where type eq 'E' or type eq 'A' or type eq 'X'.
exit.
endloop.
if sy-subrc ne 0.
refresh i_message_tab.
call function 'BAPI_TRANSACTION_COMMIT'
exporting
wait = 'X'.
wa_message_tab-msgid = 'M7'..
wa_message_tab-msgty = 'S'.
wa_message_tab-msgno = '060'.
wa_message_tab-msgv1 = gv_matdoc.
wa_message_tab-msgv2 = ''.
wa_message_tab-msgv3 = ''.
wa_message_tab-msgv4 = ''.
append wa_message_tab to i_message_tab.
else.
refresh i_message_tab.
call function 'BAPI_TRANSACTION_ROLLBACK'.
write a message as there is an unexpected error.
loop at i_return.
wa_message_tab-msgid = i_return-id.
wa_message_tab-msgty = i_return-type.
wa_message_tab-msgno = i_return-number.
wa_message_tab-msgv1 = i_return-message_v1.
wa_message_tab-msgv2 = i_return-message_v2.
wa_message_tab-msgv3 = i_return-message_v3.
wa_message_tab-msgv4 = i_return-message_v4.
append wa_message_tab to i_message_tab.
endloop.
endif.
call function 'C14Z_MESSAGES_SHOW_AS_POPUP'
tables
i_message_tab = i_message_tab.
endform. " create_goods_movement
*& Form determine_bapi_code
form determine_bapi_code using p_bwart type bwart
changing p_code type bapi2017_gm_code.
data: lt_t158b type table of t158b with header line.
clear p_code.
select tcode from t158b into corresponding fields of table lt_t158b
where bwart eq p_bwart.
loop at lt_t158b.
select single gmcode from t158g into p_code
where tcode eq lt_t158b-tcode.
if sy-subrc is initial.
exit.
endif.
endloop.
endform. " determine_bapi_code
*& Form paging
form paging using code.
data: i type i,
j type i.
case code.
when 'P--'. tc_itab-top_line = 1.
when 'P-'.
tc_itab-top_line = tc_itab-top_line - line_count.
if tc_itab-top_line le 0.
tc_itab-top_line = 1.
endif.
when 'P+'.
i = tc_itab-top_line + line_count.
j = tc_itab-lines - line_count + 1.
if j le 0.
j = 1.
endif.
if i le j.
tc_itab-top_line = i.
else.
tc_itab-top_line = j.
endif.
when 'P++'.
tc_itab-top_line = tc_itab-lines - line_count + 1.
if tc_itab-top_line le 0.
tc_itab-top_line = 1.
endif.
endcase.
endform. " paging
*& Form write_alv
form write_alv .
perform find_list_header.
perform fill_field_cat.
perform fill_sortinfo.
g_repid = sy-repid.
gs_layout-colwidth_optimize = 'X'.
gs_layout-zebra = 'X'.
answer = 'Y'.
call function 'REUSE_ALV_GRID_DISPLAY'
exporting
i_buffer_active = ''
i_callback_program = g_repid
i_save = 'A'
i_callback_top_of_page = 'TOP_OF_PAGE'
is_layout = gs_layout
it_fieldcat = gt_fldcat[]
it_sort = gt_sortin[]
tables
t_outtab = itab[].
endform. " write_alv
Form find_list_header
form find_list_header.
data : v_datum(10),
v_datlo(10),
v_dathi(10),
v_uzeit(8).
clear: gt_header, gt_header[].
gt_header-typ = 'H'.
gt_header-info = sy-title.
append gt_header.
clear gt_header.
gt_header-typ = 'S'.
gt_header-key = 'Çalıştırma Zamanı : '.
write syst-datum to v_datum.
write syst-uzeit to v_uzeit.
concatenate v_datum '/' v_uzeit into gt_header-info.
append gt_header.
endform. " find_list_header
Form fill_field_cat
form fill_field_cat.
refresh gt_fldcat.
clear gt_fldcat.
gt_fldcat-key = 'X'.
add-fieldcat 'MATNR' 'MARA' ''.
add-fieldcat 'MAKTX' 'MAKT' ''.
add-fieldcat 'CHARG' 'MSEG' ''.
gt_fldcat-do_sum = 'X'.
add-fieldcat 'MEINS' 'MARA' 'Olcu Birimi '.
gt_fldcat-do_sum = 'X'.
add-fieldcat 'ERFMG' 'MSEG' 'Adet'.
endform. " fill_field_cat
Form fill_sortinfo
form fill_sortinfo.
gt_sortin-up = 'X'.
gt_sortin-fieldname = 'MATNR'. append gt_sortin.
endform. " fill_sortinfo
Form top_of_page *
form top_of_page.
call function 'REUSE_ALV_COMMENTARY_WRITE'
exporting
i_logo = 'ZKUTAS'
it_list_commentary = gt_header[].
endform. " top_of_pageHI,
if it is a normal report program then you can directly create a Selection screen field.
After the Type-pool you can use Parameters or Select-options to create the selection screen field..
If it is a Modulpool program then you can create a selection scren field like
SELECTION-SCREEN BEGIN OF SCREEN 1100 AS SUBSCREEN.
PARAMETERS: p1(10) TYPE c.
SELECTION-SCREEN END OF SCREEN 1100.
defines a selection screens 1100 as subscreens.
The next screen number of screen 100 is 100 (statically-defined).
PROCESS BEFORE OUTPUT.
MODULE status_0100.
CALL SUBSCREEN area INCLUDING sy-repid number.
PROCESS AFTER INPUT.
MODULE cancel AT EXIT-COMMAND.
CALL SUBSCREEN area.
MODULE user_command_0100.
look at the below link
http://help.sap.com/saphelp_nw2004s/helpdata/en/e7/deb237b9a9a968e10000009b38f8cf/content.htm
Regards
Sudheer -
How to hide input fields on selection screen using variant attribute
Hello all,
I want to know how to hide input fields on selection screen using variant attribute conpletely.
As you know, when setting the attribute of variant "Hide field" checked, the field is temporarily hidden, but when clicking "All Selections(F7)" button on the selection screen, the fileds become appeared.
I want to hide the field completely. Di you know how to do ?
Thank you for your support.
Regards,
Hideki KozaiUse this attribute hide field and save the variant. Then create transaction for this program setting default variant for parameter Start with variant . The user who runs it will have it by defualt set.
Otherwise
in PBO simply use LOOP at screen and output = 0 for this field. This will ensure that field is invisible in any case.
Regards
Marcin -
Validate a field on selection screen based on value entered on anothr field
HI,
There is a program with some fields in selection screen in EWM. The first field is Warehouse. I need to add another field 'Entity to Dispose' in such that what ever value I enter in Warehouse field, its corresponding values should only be displayed as F4 help for 'Entity to Dispose' field.
For eg: If I select the warehouse as 0799(lets say), then the F4 help for Entity to Dispose field should display only the values which are related to warehouse 0799 (and any other values pertaining to other warehouse should not appear).
Could anyone suggest, how this can be achieved?
Thanks in advance.
Regards,
PavanHi,
You can use FM
DYNP_VALUES_READ
DYNP_VALUES_UPDATE
to read the another field value and Using that field build your internal table for f4 values.
and use FM F4IF_INT_TABLE_VALUE_REQUEST for F4 values..
do this on AT SELECTION-SCREEN ON VALUE REQUEST FOR <YOUR_F4_FIELDNAME>. -
Default Current year in select option field on selection Screen
Dear Experts,
I want to set current year as default value in fiscal year select-options field on selection screen.
for this, i hv written following code
DATA:VAR_DATE TYPE SY-DATUM.
DATA VAR(4) TYPE C.
VAR_DATE = SY-DATUM.
VAR = VAR_DATE+0(4).
this retrieves current year .
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-000.
SELECT-OPTIONS I11 FOR ANLC-GJAHR DEFAULT VAR TO VAR.. "Fiscal Year
SELECTION-SCREEN END OF BLOCK B1.
Now when i am executing program pop-up is raised describing "Specify the range Limits". Please help.
Regards,
Apoorv Sharma>
Ganga Bhavani R wrote:
> Use below lines.
>
> SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-000.
> SELECT-OPTIONS I11 FOR ANLC-GJAHR DEFAULT SY-DATUM+0(4). "Fiscal Year
> SELECTION-SCREEN END OF BLOCK B1.
Hi, Ganga,
I think it will not working properly that way, Please test the bellow Sample Code.
TABLES: anlc.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-000.
SELECT-OPTIONS i11 FOR anlc-gjahr .
SELECTION-SCREEN END OF BLOCK b1.
INITIALIZATION.
IF i11[] IS INITIAL.
i11-low = sy-datum+0(4).
APPEND i11.
ENDIF.
Thanks and Regards,
Faisal -
Transaction DP97: Need to add 2 fields on selection screen...
Hi,
I am using ECC6.0. I need to add 2 extra fields on selection screen of transaction DP97. Program name is RVPKMASS97. i did not find any screen-exit for this. Please can anybody suggest any other way to add fields on selection screen... I think i can use enhancement points. please help if anybody has previously worked on this. I need to know following things:
1) how to add 2 fields on selection screen ( 2 fields are : MATNR-Service product and FFPRF-DIP profile)
2) where to add programming logic for this
Thanks in advance,
MinalHi,
Go to program RVPKMASS97.
Go inside INCLUDE rvpkmasspar.
(When you double click on the include a pop up screen will come up and in that select the RVPKMASS97)
Click on spiral icon there on the tool bar.
right click on the '
ENHANCEMENT-POINT RVPKMASSPAR_01 SPOTS ES_RVPKMASSPAR STATIC INCLUDE BOUND .' line and select enhancement-> create. and give some implementation name and text.
now you can declare ur fields in this implementation.
After declaring save it and activate it.
Now go back to ur txn and run. you are able to see the custom fields on the screen.
Reward me points if it is helpful.
I think it will help you out.
Thanks,
Prasanna -
Validating field on selection screen
wht is the meaning of validation
how to validate a particular field on selection screen
suppose parameters:p_vkorg like vbak-vkorg.
how to validate p_vkorg.
pz give me codingHello pavan,
Validation means "checking whether the input which u are gining to the selection secreen is valid or not". means...
Lets take your example only...
parameters:p_vkorg like vbak-vkorg.
in selection screen you will give inout in that parameter....
users can give any input... lets suppose I'll give input as ABC... which is not in the table VBAK. No need to excute the code once we came to know that the input is not there in the table. So we will do validation like...
at selection-screen on p_vkorg.
select * from vbak where vkorg = p+vkorg. " This is the case with Parameter.
at selection-screen on p_vkorg.
Select * from vbak where vkorg = p+vkorg. " This is the case with Selct-option.
if the input that u r giving is present in the table... the above stmt will execute successfully, otherwise not.
You can make use of System variable SY-SUBRC and you can go ahead with ur coding...
Reward If Helpful
Regards
Sasidhar Reddy Matli.
Message was edited by:
Sasidhar Reddy Matli -
ABAP Query : Obligatory fields on selection screen!
Hi Experts,
I would like to know the differrent ways through which we can define mandatory fields on selection screen.Options availabel in Infosets (SQ02) as well as Query(SQ01).
Selection Screen:
Document Date in Document: (Mandatory Select-Option)
Plant : (Mandatory Select-Option)
Thanks,
YogeshHi, Everyone .
We can do that .
At selection-screen output (code section 13), set "1" to the field REQUIED by using MODIFY SCREEN code .
(You can get Dynpro number by F1 key or T-cd SE51 )
Masao .
Edited by: MASAO NONAKA on Oct 20, 2008 9:11 AM -
How to disable a field in selection screen based on condition.
Hi,
I have 2 radio buttons- p_normd, p_recov and 2 other controls - like text boxes, say tb1 and tb2. and some mandatory fields below.
If i choose p_normd, i want one control(tb2) to be disabled and if i choose p_recov, i want the other control(tb1) to be disabled(tb2 should be enabled then.)
Currently i am using the following code. The 1'st radiobutton is intially checked. But the problem is when i click on the 2'nd radio button, the other control(tb1) is not getting disabled. When i double click, i get an error telling mandatory field to be filled. Only after the other mandatory fields below are filled, and after i double click on the unchecked radiobutton, the other control gets disabled.
Please suggest what to do..
The current code below:
AT SELECTION-SCREEN OUTPUT. "ON RADIOBUTTON GROUP rg01.
LOOP AT SCREEN.
IF p_normd EQ c_x AND screen-group1 = 'SC2'.
MOVE 0 TO screen-input.
MODIFY SCREEN.
ENDIF.
IF p_recov EQ c_x AND screen-group1 = 'SC1'. "IF screen-name = 'ERDAT-LOW' OR screen-name = 'ERDAT-HIGH'.
MOVE 0 TO screen-input.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
Thanks,
AmmuHi
declare your parameter as below:
parameters: p_x type c radio button group g1 user-command r.
in at selection screen output event .
check for the radio button.
loop at screen.
if screen group is <desired value>
then screen-active = 0 or 1. <do whatever you want to do.>
modify screen.
endloop.
see below the sample code.
<<<<<AT SELECTION SCREEN EVENT>>>>>
AT SELECTION-SCREEN ON BLOCK B1.
IF P_LCOST = C_X.
PERFORM CLEAR_FIELDS. " Clearing fields before loading the screen
CALL SELECTION-SCREEN 100 STARTING AT 20 5.
ELSEIF P_MCOST = C_X.
PERFORM CLEAR_FIELDS1. " Clearing fields before loading the screen
CALL SELECTION-SCREEN 101 STARTING AT 20 5.
ENDIF.
IF SY-SUBRC = 0.
PERFORM VALIDATION. " Validating selection screen input
ELSE.
LEAVE TO TRANSACTION C_TRAN.
ENDIF.
<<<<<<DECLARATION PART>>>>>>
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
PARAMETERS: P_LCOST RADIOBUTTON GROUP GI DEFAULT 'X',
P_MCOST RADIOBUTTON GROUP GI.
SELECTION-SCREEN END OF BLOCK B1.
SELECTION-SCREEN BEGIN OF SCREEN 100 AS WINDOW TITLE TEXT-002.
SELECTION-SCREEN BEGIN OF BLOCK B2.
PARAMETERS: P_COAREA TYPE CSKS-KOKRS OBLIGATORY, " controlling area
P_FYR TYPE COEP-GJAHR OBLIGATORY, " fiscal year
P_PERIOD TYPE COEP-PERIO OBLIGATORY. " fiscal period
SELECT-OPTIONS: S_CCNTR FOR V_KOSTL OBLIGATORY, " Cost Center
S_COELM FOR V_KSTAR MODIF ID M1, " Cost element
S_PDATE FOR V_BUDAT OBLIGATORY. " posting date.
SELECTION-SCREEN END OF BLOCK B2.
SELECTION-SCREEN END OF SCREEN 100.
SELECTION-SCREEN BEGIN OF SCREEN 101 AS WINDOW TITLE TEXT-003.
SELECTION-SCREEN BEGIN OF BLOCK B3.
PARAMETERS: P_CCODE TYPE T001-BUKRS OBLIGATORY, " Company Code
P_FYEAR TYPE COEP-GJAHR OBLIGATORY. " fiscal year
SELECT-OPTIONS: S_GLACC FOR V_HKONT OBLIGATORY, " G/L Account
S_PCNTR FOR V_PRCTR MODIF ID M2, " Profit Center
S_PODATE FOR V_BUDAT OBLIGATORY. " posting date.
SELECTION-SCREEN END OF BLOCK B3.
SELECTION-SCREEN END OF SCREEN 101.
thanks
LG
Edited by: LalitG on Apr 13, 2011 1:38 PM -
How can i declare a single radio button field in selection-screen ?
How can i declare a single radio button field in selection-screen ?
>
Rob Burbank wrote:
> And how will you turn it off once it is turned on??
>
> Rob
Thats correct ;)...See ravi if users will ask so many things its our Job to convay the correct solution ....
Just post your org requirement..SOo some body guide you better//
Sas
Maybe you are looking for
-
Reg: stat command in solaris 10
Hi Gurus, Where i can find the stat command in solaris 10. Any one help is appreciated.
-
hi all, There is an error when I use SAP Connectivity from NW studio. 1.I can see all the function listed. 2.I choose one function (such as "BAPI_SALESORDER_GETLIST")and then clicked "finish" button. 3.the error box jumped out "<objek
-
Spotlight ability to "browse" folders?
Hello, I want to ask, if there is a possibility to browse folders in Spotlight, instead of opening them in the finder. For example: I search for a music band name and get the band folder in the iTunes library as a result. Now I would like to browse i
-
Importing Pantone + series libraries from Pantone Color Manager
Greetings, I'm exporting Pantone + series libraries from Pantonce Color Manager to Illustrator. Specifically Solid Coated & Uncoated. When I open the libraries on Illustrator the values don't match my color guides. That problem doesn't happen when I
-
Unable to connect to Time Capsule wireless AP.
I've got WPA/WPA2 security enabled on the TC and I enter the password into the iPhone (3G w/2.2) and I get the message that it can't connect. I also have a LinkSys 11g AP and it has WPA security on it and the iPhone won't connect to it either. This i