Setting sms in SAP B1 2007 B PL 13
Hi! Friends,
Can any one please give me some idea for setting sms in SAP B1 2007 B PL 13.
Hi Subhas,
SMS functionality is supported only for Israel localization. You could refer to SAP note : 658689 for details.
Regards,
Vijay Kumar
SAP Business One Forums Team
Similar Messages
-
Hi,
I´m very confused with the several threads, and notes about the setting SMS from SAP to Cellulars.
If I want to configure the sending of sms from SAP, I´ve to declare the NODE with HTTP? Or can to setup as SMTP?
If I setting the node with HTTP, I´ve to use my smsprovider, that is not mandatory what my own company mobile,not?Hello Ruben,
Well its very much possible to sent out sms from SAP System and you need to configure the system according to SAP Setting provided in below 02 SAPnotes.
How it SAP handles outgoing SMS/Paging
Note 455129 - Paging/SMS in different SAP releases
How you need to configure your SAP system.
Note 455140 - Configuration of e-mail, fax, paging or SMS using SMTP
I hope you will get all the information in above 02 SAPnotes.
PS:As of Release 6.20, you can also send and receive fax and SMS or paging messages using SMTP
All the best !! -
Bounce Management in SAP CRM 2007
Hi Experts,
we have SAP CRM 2007 and I have a few questions about Bounce Management.
It is a very simple scenario, so it´s fine if only hard bounces for incoming EMails are handled.
1) Do you need ERMS for that simple form of Bounce Mgt?
2) Is the Usage of Inetraction Center required? (We do not want to)
3) Is it possible/recommended to create Activities out of incoming bounces?
4) Can you segment on Bounces, not only within the Campaign Automation?
5) What ist the effort/set up to use Bounce Mgt in that simple scenario about?
Thanks a lot
FlorianYes, I was mentioning SAP Note 897730. The major pre-requisite mentioned there is Event linkage settings through SWETYPV transaction and in your case you just need to do the Rule Modeler settings. If you are using DEFAULT policy you do not need to do anything in Service Manager Profile.
The note pre-requisites mentioned are
The required services and service manager profiles for using the E-Mail Response Management System (ERMS) are defined: All entries necessary for bounce management are delivered in the default Customizing. As I mentioned before Service Manager Profile: Bounce is already defined and you are going to use that profile. The required service in your case would be "Bounce Data Update" or one of the 5 standard service mentioned in this note. These are already defined and taken care of in standard configurations. Therefore, you do not need to do anything over there.
Please do the above two settings and if you have any issues please come back to me. I am sure you won't have any issues with the requirements that you mentioned. I just took one hour to set up hard bounce scenario. Only if you are planning to use services that are not standard it becomes slightly tricky. In our case major issue was that there was an error in the standard workflow. I did not know much about Workflow bindings etc. before, but then I had to dig deep into this and it gave me an opportunity to learn workflows. This was the good thing that came out of all this.
Regards,
Deepak
Please note you will have to do the Event Linkage settings in SWETYPV transaction.
Edited by: Deepak Ahuja on Jun 5, 2008 9:15 AM -
Error while installing SAP NetWeaver 2007
Dear All,
I got an exception while installing SAP NetWeaver 2007
on Windows 2003 Enterprise Edition (service pack 1). This exception occured when installer tried to install MaxDB database. When I saw installation log file, I found following msgs. Pls suggest me appropriate solution so that I could install SAP NetWeaver 2007 on my m/c.
I am giving log details bellow.
Thanks,
Regards,
Rajendra Pote.
Log file details:
(Aug 3, 2006 1:54:11 PM), Install, com.sap.installshield.maxdb.maxdb_call_sdbinst, err, An error occurred and product installation failed. Look at the log file C:\sapdb\JP1\log.txt for details.
(Aug 3, 2006 1:54:12 PM), Install, com.sap.installshield.maxdb.maxdb_call_sdbinst, err, ProductException: (error code = 601; message="Thu Aug 03 13:54:11 GMT+05:30 2006 An Error happened during the Change of the MaxDB Database passwords. Check end of Logfile C:/DOCUME1/ADMINI1.SER/LOCALS~1/Temp/MaxDBSAPNWPREV.log")
STACK_TRACE: 22
ProductException: (error code = 601; message="Thu Aug 03 13:54:11 GMT+05:30 2006 An Error happened during the Change of the MaxDB Database passwords. Check end of Logfile C:/DOCUME1/ADMINI1.SER/LOCALS~1/Temp/MaxDBSAPNWPREV.log")
at com.sap.installshield.maxdb.maxdb_call_sdbinst.install(maxdb_call_sdbinst.java:260)
at com.installshield.product.service.product.PureJavaProductServiceImpl.installProductAction(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.getResultForProductAction(Unknown Source)
at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(Unknown Source)
at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(Unknown Source)
at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl.installProduct(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at com.installshield.wizard.service.LocalImplementorProxy.invoke(Unknown Source)
at com.installshield.wizard.service.AbstractService.invokeImpl(Unknown Source)
at com.installshield.product.service.product.GenericProductService.installProduct(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl.installAssembly(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl.access$900(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(Unknown Source)
at com.installshield.wizard.service.AsynchronousOperation.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
MaxDBSAPNWPREV.log file details
Thu Aug 03 13:54:14 GMT+05:30 2006 MaxDB: Checking x_server
Thu Aug 03 13:54:14 GMT+05:30 2006 MaxDB program: c:/sapdb/programs/bin/x_server.exe
Thu Aug 03 13:54:14 GMT+05:30 2006 MaxDB: Found c:/sapdb/programs/bin/x_server.exe
Thu Aug 03 13:54:14 GMT+05:30 2006 MaxDB: Calling: "c:/sapdb/programs/bin/x_server.exe" start
MaxDB: 18641 ERROR: XSERVER is already running!
Thu Aug 03 13:54:14 GMT+05:30 2006 MaxDB: rc of x_server call = 32
Thu Aug 03 13:54:14 GMT+05:30 2006 MaxDB: dropping database instance: JP1
Thu Aug 03 13:54:14 GMT+05:30 2006 MaxDB: Try to establish connection to JP1
Thu Aug 03 13:54:14 GMT+05:30 2006 MaxDB: command failed: <DBMException -24950 ERR_USRFAIL User authorization failed>
Thu Aug 03 13:54:14 GMT+05:30 2006 MaxDB: rc of Method: 0
Thu Aug 03 13:54:14 GMT+05:30 2006 MaxDB: sdbuninst
Thu Aug 03 13:54:14 GMT+05:30 2006 MaxDB program: c:/sapdb/programs/bin/sdbuninst.exe
Thu Aug 03 13:54:14 GMT+05:30 2006 MaxDB: Calling: "c:/sapdb/programs/bin/sdbuninst.exe" -all
MaxDB sdbuninst:
MaxDB sdbuninst: uninstall following package(s):
MaxDB sdbuninst:
MaxDB sdbuninst: Database Kernel c:/sapdb/jp1/db 7.6.00.23 32 bit
MaxDB sdbuninst: Server Utilities c:/sapdb/programs 7.6.00.23 32 bit
MaxDB sdbuninst: Webtools c:/sapdb/programs/web 7.6.00.23 32 bit
MaxDB sdbuninst: ODBC c:/sapdb/programs 7.6.00.23 32 bit
MaxDB sdbuninst: JDBC c:/sapdb/programs 7.6.00.24
MaxDB sdbuninst: Messages c:/sapdb/programs MSG 0.3215
MaxDB sdbuninst: Base c:/sapdb/programs 7.6.00.23 32 bit
MaxDB sdbuninst:
MaxDB sdbuninst:
MaxDB sdbuninst: found instance JP1
MaxDB sdbuninst: cannot remove package "Database Kernel": first you have to remove all instances
MaxDB sdbuninst: fatal error at Th, Aug 03, 2006 at 13:54:27
Thu Aug 03 13:54:28 GMT+05:30 2006 MaxDB Error during call to sdbuninst, rc= 1
Thu Aug 03 13:54:28 GMT+05:30 2006 MaxDB: Done with call_sdbuninst
Thu Aug 03 13:54:28 GMT+05:30 2006 MaxDB: rc of Method: 1
Thu Aug 03 13:54:28 GMT+05:30 2006 MaxDB: End of CallSdbuninst
Thu Aug 03 13:54:28 GMT+05:30 2006 MaxDB: End of uninstallation
MaxDb_SAPNW.log
Thu Aug 03 13:44:40 GMT+05:30 2006 MaxDB: Start SoftwareCheck
Thu Aug 03 13:44:40 GMT+05:30 2006 MaxDB: IndepProgPath:
Thu Aug 03 13:44:40 GMT+05:30 2006 MaxDB: IndepDataPath:
Thu Aug 03 13:44:40 GMT+05:30 2006 MaxDB: Software doesn't exist, Variable MAXDB_SOFTW_EXISTS set to NO
Thu Aug 03 13:44:40 GMT+05:30 2006 MaxDB: end of Check Section!Hi,
the following parts of the log should give you some hints about what might be wrong:
"dropping database instance: JP1"
"found instance JP1 "
"cannot remove package "Database Kernel": first you have to remove all instances"
It seems you still have a MaxDB instance named JP1 on your system. This instance could not be dropped, because it was not possible for the uninstaller to connect to the db instance:
"dropping database instance: JP1"
"Try to establish connection to JP1"
"command failed: <DBMException -24950 ERR_USRFAIL User authorization failed>"
So, if enough parts of the software are still available and you know how to connect to the JP1 instance (using either the Database Manager GUI or DBMCLI), you can drop the instance and proceed with the installation.
Regards,
Roland -
SAP CRM 2007 - How to Access a Table from one view to another via ABAP BSP
Hi experts, I need your help.
I am working in SAP CRM 2007 developing code modifiying views using transaction "BSP_WD_CMPWB" and my problem is the following:
After the "Account Identification" process I go to "Create Case" and click in "Complaints" option in the navigation bar.
Here there are several views involved, like "General data" and "Parties involved"
"General data" belongs to the component "BT126H_CALL" and the name of the view is "SCDetails.htm"
"Parties involved" belongs to the component "BTPARTNER" and the name of the view is "Partner.htm"
The "Partner.htm" view has a table that is displayed using a "<chtmlb:configTable . . . table = "//BTPartner/Table" instruction.
I need to acces the table "//BTPartner/Table" that belongs to "Partner.htm" in the view "SCDetails.htm" and add data into it.
How can I do that ?
Add the data in the view "Partner.htm" itself is very simple, I am using the "EH_ONINSERT" method but I have not idea how to do that from "SCDetails.htm".
Thanks in advance for your help.
Best Regards.
Exequiel.Hi,
as I understand from your question you would like to add a partner to the complaint document.
The complaint document is a 1Order document and has the root genil node named BTOrder. Using the genil relationships you have to get the BTPartnerSet and then the right Partner Relationship.
You will find a lot of information in the newsgroup on how to do this by doing a search.
But a quick help would be to use the sapgui transaction genil_model_browser, component set ONEORDER and using the tree structure navigate from the BTOrder root node to the Partner set.
Best regards,
Erika -
Problem while import u201CSAPKU60003 & SAPKNA7013u201D into SAP CRM 2007
Gentlemen,
I have a problem while import u201CSAPKU60003 & SAPKNA7013u201D into SAP CRM 2007,
My current Support Package Level is:
SAP_ABA 700 0015
SAP_BASIS 700 0015
PI_BASIS 2006_1_700 0006
ST-PI 2005_1_700 0006
CRMUIF 600 0003
SAP_BW 700 0017
SAP_AP 700 0012
BBPCRM 600 0002
First I had the following error:
Syslog: k CQ3 : UMGSETTING& rscpexcc 12
GetDBMigrateCodePagesLangs uses TCP0D, TCPDB, TCP0C.
0 entries from FUNCT (%/SAPCND/CNF_GET_RECORD_FROM_DB%) deleted.
0 d / 0 i / 0 u / 6 = 100% ucf FUPARAREF
6 entries for FUPARAREF imported (/SAPCND/CNF_GET_RECORD_FROM_DBA*).
0 entries from RODIR (FUNC/SAPCND/CNF_GET_RECORD_FROM_DB) deleted.
0 entries from RODIR (FUNC/SAPCND/CNF_GET_RECORD_FROM_DB) deleted.
0 d / 0 i / 0 u / 1 = 100% ucf TFTIT
1 entry for TFTIT imported (D/SAPCND/CNF_GET_RECORD_FROM_DB*).
successfully set a temporary lock on table REPOSRC
REPOS /SAPCND/LDETERMINATION$14 A replaced.
REPOS /SAPCND/LDETERMINATIONU14 A replaced.
[dev trc ,00000] Wed Nov 26 16:33:14 2008 1315447 8.171484
[dbdsoci. ,00000] *** ERROR => invalid offset 0 for placeholder 16
71 8.171555
unsuccessful statement: EXEC SQL: SELECT ID,OBJECT,LANGU,TYP,VERSION FROM DOKIL WHERE (LANGU IN (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,
dsql_open returned with unexpected error code 2
Please contact the SAP support.
End of Transport (0016).
date&time: 26.11.2008 - 16:33:14
5 warnings occured.
3 errors occured.
Main import
End date and time : 20081126163314
Ended with return code: ===> 16 <===
After I got this error I upgraded the Kernel from patch level 159 to 179,
After that I restarted the update again but the system is still running on u201CIMPORT_PROPERu201D and dose not given any update,
From Import logs of the queue I can see the following,
Summary:
24 DOCUT imported.
16 DYNPS imported.
30 DYNPT imported.
387 REPOS imported.
43 REPOT imported.
Totally 505 Objects imported.
Totally 3636 tabentries deleted.
Totally 14 objects activated.
Totally 12229 tabentries imported.
62066888 bytes modified in database.
[dev trc ,00000] Wed Nov 26 18:14:19 2008 20996974 40.917838
[dev trc ,00000] Disconnecting from ALL connections: 30 40.917868
[dev trc ,00000] Disconnecting from connection 0 ... 287 40.918155
[dev trc ,00000] Closing user session (con_hdl=0,svchp=00000000003005B8,usrhp=00000000002FB748)
5759 40.923914
[dev trc ,00000] Detaching from DB Server (con_hdl=0,svchp=00000000003005B8,srvhp=00000000061530E8)
921 40.924835
[dev trc ,00000] Now I'm disconnected from ORACLE 8230 40.933065
[dev trc ,00000] Disconnected from connection 0 90 40.933155
[dev trc ,00000] statistics db_con_commit (com_total=527, com_tx=307)
59 40.933214
[dev trc ,00000] statistics db_con_rollback (roll_total=0, roll_tx=0)
52 40.933266
Disconnected from database.
End of Transport (0004).
date&time: 26.11.2008 - 18:14:19
2 warnings occured.
Main import
End date and time : 20081126181419
Ended with return code: ===> 4 <===
Please advice me.
Regards,
AhmedI have similar problem while updating support packages in SAP R/3 4.6C environment.
000 unsuccessful statement: EXEC SQL: SELECT ID,OBJECT,LANGU,TYP,VERSION FROM DOKIL WHERE (LANGU IN (?,?,?,?,?,?,?,?,?,?,?,?,?,?,
000 dsql_open returned with unexpected error code 1
000 unsuccessful statement: EXEC SQL: SELECT ID,OBJECT,LANGU,TYP,VERSION FROM DOKIL WHERE (LANGU IN (?,?,?,?,?,?,?,?,?,?,?,?,?,?,
000 dsql_open returned with unexpected error code 1
Here is an outline of series of events that happened:-
We are applying in support packages in SAP R/3 4.6C HR Development
(TFI) environment. We planned with installing all the SP stacks
starting from 1 to 9.
-Updated kernel, tp , r3trans and SPAM level to latest level.
We received the following error in Import_Proper step of Support
package upgrade. Though the step has been repeated after making sure
that we have all the required files at OS level, we go this error
repeatedly.
Main import
Transport request___: SAPKB46C52
System______________: TFI
tp path : tp
Version and Release: 305.13.25 46D
check-sum error in datafile after 9374854 bytes.
Main import
End date and time : 20081205192603
Ended with return code: ===> 16 <===
When we renamed Co-File & data_file at OS level to see if the files are
created again and reran we got the following error.
Main import
Transport request___: SAPKB46C52
System______________: TFI
tp path : tp
Version and Release: 305.13.24 46D
Main import
End date and time : 20081205185117
Ended with return code: ===> 12 <===
We tried importing the individual support package SAPKB46C52 from STMS
and the transport cancelled at an earlier step with the same error.
Dictionary import
Transport request___: SAPKB46C52
System______________: TFI
tp path : tp
Version and Release: 305.13.25 46D
check-sum error in datafile after 9374854 bytes.
Dictionary import
End date and time : 20081205195929
Ended with return code: ===> 16 <===
While playing around I have deleted the transport from the tp buffer
and added manually, before doing so I made a backup of tp buffer at OS
level and I got following error though I reverted back to backed-up
copy.
- Error in phase: IMPORT_PROPER
- Reason for error: TP_BUFFER_INCONSISTENCY
- Return code: 0008
- Error message: Wrong sequence of Packages in the tp buffer (e.g.
SAPKB46C52 )
I then tried to disassemble the package separately and reran the
import queue. Now I have RC 8 on that support package.
When I did R3trans -l on the datafile it completed successfully.
D:\>R3trans -l \usr\sap\trans\data\RB46C52.SAP
This is R3trans version 6.05 (release 46D - 27.10.08 - 16:32:00).
R3trans finished (0000).
I verified the size of file "CSR0120031469_0023301.PAT" and it is the
same as mentioned in SSP.
Let us know is there is a workaround. -
Hi,
Im currently doing a internship were im researching the possibilities to introduce SAP SM to a particular industry . One of my sub tasks for my dissertation is to set-up a SAP SM demo. I hope I can consult your memories as im using the nostalgic version 2007. Through delay in the completion of the new training server within my company I was forced to install an older version of SAP SM my selves.
I managed to install SAP SM and set-up the rational database but im facing problems with the multi-dimensional database. (scorecard)
I created dimensions, variables and I loaded data into the variables using a dBase file. However in e.g. the dimension "Channel" I made distinction between Export in Import. Now I can see the values of these inputs separately, but I do not get the result of them both calculated in TOTAL_CHANNEL. I can see the results of the inputs separately both in Pilot administrator and Excel but not in the dashboard(scorecard) but I guess that is because the KPI is based on TOTAL_CHANNEL.
Code channel dimension:
INPUT
EXPORT
,IMPORT
RESULT
TOTAL_CHANNEL 'TOTAL CHANNEL'
LEVEL
CHANNEL
TOTAL_CHANNEL = INPUTS
data DBase file im using as input for the measure
CHANNEL TIME VALUE
Export 1-9-2009 102004
Export 1-10-2009 120440
Export 1-11-2009 120430
Export 1-12-2009 150034
Export 1-1-2010 80004
Import 1-9-2009 40900
Import 1-10-2009 12400
Import 1-11-2009 45003
Import 1-12-2009 34005
Import 1-1-2010 65434
I hope someone can help me out, I know its a long time ago but so few information about the 2007 version is still left.
Regards,
DavyDavy,
You have to make sure that you have built out all the appropriate areas in the Administrator interface.
First, check to make sure that your Model Connection works. If not, check your LinkID in PAS to make sure it is configured correctly.
If your model connection works, check that you have designated that model to be used for the Context/scorecard in question.
Also check Set KPIs to make sure you have CREATED the KPIs in SSM and associated those with measures from the selected model.
Regards,
Bob -
SAP B1 2007 A unable to install
HI
I tried installing SAP B1 2007 A PL-00 (Base version )on Windows 2008 R2 platform , But after installing Server tools cannot able to install Server, cannot find the connectivity with SQL .
Although , its is compatability issue ,I faced the same issue , which is resolved by installing higher base patch level PL 10 .
Can anyone give me the link to download SAP Business One 2007 A higher version of patch level , might be i am bale to resolve the issue using this.
Also i am not able to find the same on sbo-swcenter, i need PL 30 upgrade.
Thanks in advance
RPI am unable to install the SAP Business one 2007 B PL00 on Windows server 2008 R2.
Environment is set as following :
1. SQL SERVER 2008 Installed on Server A
2. SAP B1 to be installed on Server B
3 Both servers are in domain
4.Firewall is off
5. ODBC Connection is tested Successfully
6 Port is also seem to be ok.
But after Installing server tool, when trying to install the Server , in server type nothing is displayed.
I also checked the connecting SQL server from the instance .
Please help is this is related to compatibility of Windows server 2008 R2 with 2007 B or so .
Although i have also download the PL30 tried with the package . cannot able to connect. -
Type Of Connection For Crystal Report in SAP B1 2007 A
Dear All,
I want to make Crystal Report for a module?What connection must be used? I made User DSN and File DSN both but when I called that particular .rpt file from SAP B1 2007 A it shows the error "
Crystal Report Windows Forms Viewer
Failed to open the connection.
Failed to open the connection.
TestFileDSN_OITM {A3103093-3D56-4F37-95B4-AD9739E212A2}.rpt
If possible please tell me the details how to used appropriat connection on both client and server (if possible step by step).
Thanks in advance
Ghazanfaris your report running inside SAP b1 or directly from crystal report in system where you developed it
In Client you need to install .net framework 3.5 and Crystal Run time to run reports.
in the client make sure the shared directory is accessible from run without any password
and in the add on go to report properties and set the path to the shared folder .rpt files and apply changes
use OLE DB connection
CRYSTAL REPORTS 2008 V1 FOR B1
(click on Installation)
https://websmp208.sap-ag.de/~form/handler?_APP=00200682500000001943&_EVENT=DISPHIER&HEADER=N&FUNCTIONBAR=N&EVENT=TREE&TMPL=01200314690900002156&V=INST
Crystal Reports Integration for SAP Business One
http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/webcontent/uuid/707f51b3-0b20-2b10-8daa-d8ee72ace309 [original link is broken]
in case you have any problem installation go through the demo and make sure you have installed correctly
https://websmp201.sap-ag.de/~sapidp/011000358700000727712008E.htm
Thanks
Krish -
PME Configuration SAP CRM 2007
Hi Gurus
Need your help,
Currently we are using SAP CRM 2007.We need to configure the variant configurable products,I think in CRM we need to use the PME to configure the variant products,Is the PCM is inbuilt in CRM? or we need to install any software,yes please give me downloadable path.
After configuring the Variant products we need to display in b2b e-commerce portal,
Is any body having any idea please send the response ASAP.
Awaiting for ur response
Regards
SatishHi,
for the majority of manufacturing customers doing make-to-order a re-use of their VC models defined in ERP is the better option. The AP Configurator (new name for the SCE part of the IPC) supports 95% of all of the product model as defined in VC. This re-use allows to conitnue to use the same product master data for high-volume make-to-order orders via CRM and at the same time for engineer-to-orders that are changed solely in ERP.
The typical process looks like this:
- Adjust VC product model to fit AP configurator if necessary (delta-list is described at help.sap.com > ERP > SAP ERP Central Component > Logistics > Variant Configuration > Product Configuration with the Configuration Engine > ERP Master Data and Configuration Engine)
- Adjust VC product model to fit the needs of the extended user base in CRM if necessary (very often the product model in VC is technical and requires specification of many technical characteristics. To overcome this additional sales- or application-oriented characteristics might need to be added that pre-fill in values for the technical characteristics using constraints or other rules)
- Create a Knowledgebase and extract the product model into it
- Set-up CRM Scenario including Middleware replication of product and knowledgebase
- Set-up JSP UI of the AP Configurator within CRM
- Create equivalents of user defined functions in Java and make them available to AP Configurator in CRM
For a subset of customers that does not do manufacturing in ERP setting up a product model in CRM is the other possible option available since CRM 4.0. In CRM 2007 this was improved to allow for multi-level configurable products and also provides a maintenance enviroment for product models that integrates well with the rest of master data maintenance in CRM (pricing, catalog, cross-/upsells, bundles). This maintenance environment (some still call it PME) is available in the overview page of a configurable product within the assignement block called "Product Models".
Regards, Marcus -
Can anyone help me in setting the configuration for sending SMS from SAP? Please tell how can it be done with "SCOT".
As of my knowledge, there is no special settings for SMS. Normal configuration of sending external mail would suffice the requirement.
whenever we send an SMS we used to use external(internet address) like [email protected]
If your system is configured for sending external mail then you can send an SMS to any mobile (Subject your phone based on service provider's settings)
If SCOT is not congigured then your basis guy should help you in configuration.
Regds
Manohar -
Dunning Letter on Receivables Aging SAP B1 2007
You run the customer receivables aging report and double click a row on receivables aging report window. You highlight one row, there is no letter checkbox compare to SAP 2005 A. There is no Dunning Letter PLD as well. Therefore dunning letter report cannot be previewed.
Does this letter checkbox and dunning letter PLD is not available in SAP 2007 A?
Thanks,
Kay ChongHi,
the document [Changed Features as of Release 2007 |https://websmp101.sap-ag.de/~sapidb/011000358700000281062007E.pdf]says the following:
Dunning in Aging Report
Application Path: Financials u2192 Financial Reports u2192 Accounting u2192 Aging u2192 Customer Receivables Aging u2192 Customer Receivables Aging u2013 Details window
Availability: All countries
Used for: indicating the dunning level linked to the document/transaction and creating a dunning letter if required.
Availability in
SAP B1 2007 A or B Functionality changed?
New installations N/A No
Upgrading customers All countries No
So this functionality is only available for databases upgraded from an older release.
Regards,
Marcus -
Sap CRM 2007 Security related issue
Hi All,
I am working on SAP CRM 2007 security.
I have scenario, which we are trying to fix.
There are two users A and B.
A is assigned to role X
B is assigned to role y
Business Partner 123 is created for user A
Business Partner 456 is created for user B
These Business Partners are assigned to Authorization Groups.
See below:
1)Authorization Group (LK01) is assigned to Business Partner --123.
2) Authorization Group (LK02) is assigned to Business Partner --456
3) Authorization groups LK01 is assigin to user A in PFCG role X
4) Authorization groups LK02 is assigin to user B in PFCG role Y
a) User A assigned with PFCG role X>Authorization Group (LK01)>BP 123.
b) User B assigned with PFCG role Y>Authorization Group (LK02)>BP 456.
Note:
1) Authorization Groups are assigned to BPs under the Control tab.
2) These Auth Groups are assigned in Authorization Object in PFCG role.
Now, USER 'A' should not be able to work under the BP 456 as this BP is assigned to authorization group LK02.
The issue is when we open the WEB UI and login with user A role X, He can search for the BP 456 assigned to Auth Group LK02.
User A can open the Interaction History and edit the Service Order created using the BP 456.
He can Edit the following in Service Order details:
1) General Data Status (from created to complete), Contact person, Sale Rep name.
2) Organization Data like Sales Office, Sales Org Unit, Distribution Channel
3) Business Partner.
However, one good thing is he cannot edit the Account details like Account ID, House No, Employee Resposible, the message he get is "No authorization to change partner with authorization group" which is a
good thing.
I have tried to be precise, please let me know if you require more information.
Regards,
Dave.I suggest the following:
Please, check whether the system works if you activate the implementation BUPA_F4_AUGRP.
In addition check the notes 559662, 674869 and 782927. Maybe the notes are already implemented but you can try then the implementation of the BADI (SE19). It should resolve your issue.
I have implemented this Badi solution before, and after activation; the search help ; nor search result list did NOT show any Business partners anymore that had an authorization group I was not allowed to see.
kind regards
Davy Pelssers
SAP CRM/Security consultant -
How to write a SQL query in SAP B1 2007 B with input parameters?
How to write a SQL query in SAP B1 2007 B with input parameters, on execution of which will ask for some input value from the user and the values will be selected from a list such as item list?
The syntax like
SELECT * FROM OITM T0 WHERE T0.ItemCode = '[%0\]'
Thanks,
Gordon -
Problem while changing decimal places in SAP B1 2007
Hi Experts,
I want change the decimal places of Quantity type fields from 2 decimal places to 4 decimal places. But while changing it in Genral settings form ,it shows the error message "Cannot update while another user is connected to the company". it is working in SAP B1 2005B but not in SAP B1 2007
Please help me if you have any solution on this issue..
Thanking you in advancePaul,
Please see SAP Note 1247060 as is discusses the fact that this did work in 2005, but the behavior was changed in version 2007 ...
https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/smb_searchnotes/display.htm?note_langu=E&;note_numm=0001247060
Eddy
Maybe you are looking for
-
if my phone says it needs to be restored will it delete all of the stuff i have on it? Such as music i have on an app? The music has not been synced to itunes. Will all my pictures get deleted aswell? My phone is not working for some reason, when i w
-
Old iMac, due for replacement. Working as expected until other day. Now won't boot past initial apple splash screen, then dies after 10 seconds.
-
Specifying the current database in MSSQL
How do you change the "Current" database using the JDBC:ODBC driver ? I know you could refer to a table in MSSQL by using database.owner.table but I was wondering if you could specify the current database in some manner ? Can you do it through the co
-
ON NEW TAB MY THUMBNAILS HAVE DISAPPEARED AND ONLY AOL APPEARS, HOW TO CORRECT
on all new tabs my ao news appears and not my thumbnails , need to get my thumbnails back , and my firefox is the latest version
-
HT204053 I don't have an iCloud icon in my System preferences, can't find it in my MacBook Pro?
I would like to use iCloud on my MacBook pro and iPad and iPhone. I am new to the apple systems, my computer is used and I can not find the iCloud icon under the System Preferences. What do I do?