Setting the tuning in MainStage to 442 Hz

Hi, I use mainstage together with a MOTU Traveller interface to create my guitar sounds on stage. Since the grandpiano at our last venue was tuned to 442 Hz I wanted to calibrate the tuner in mainstage to 442. But after opening the preferences and moving the slider to 442 Hz I opened the tuner and it jumped back to 440.
When I open the preferences, change the value and close the preferences and then open the preferences again the new value is still showing, only when I open the tuner it goes back to 440 Hz.
Since I often need to tune to other instruments that are not in 440 Hz I really need help here.
Thank you!
Jürgen

Here's a workaround:
Open a tuner plug-in in the channel strip, set the reference pitch to 442  and save this as your default setting. ("Save as default" in the setting pop-up menu).
Setting the tuner's reference sets the global tuning, maybe something wrong with it.
Hope this helps,
DaCaptain

Similar Messages

  • Is there a way to pre-set the alarm volume on iPhone?

    Is there a way to pre-set the alarm volume on iPhone? Every evening I have to remember to adjust the volume to 3 bars, versus full volume during the day.

    I cannot believe this problem hasn't been rectified yet!
    If I use the pre installed ringtone as an alarm and set it low so I don't jump out of my skin, then my call volume is too low the next day, so have to change it.
    If I use a song as an alarm, I have the same problem, but its when I watch a video. I set it quiet, then jump out of my skin the next morning if I've left it tuned up after watching YouTube. Also works the other way if I've watched a video with the sound down, and forget to turn it back up, then I don't hear my alarm, which makes me late!
    It could also do with an ascending volume option, so it starts nice and quiet to wake you gradually. My old phones from pre iPhone days had these features and they worked great.
    Surely this isn't that much of an issue to sort out. Yet I've seen posts back as far as 2006 complaining about it.
    Come on apple pull your finger out!

  • Why must I set the AD as "default user store " when use Kerberos scheme ???

    Hi ,
    I am using kerberos scheme to authenticate user by OAM after user logged into the AD domain . It works well when there is only 1 AD domain ,for I can set that AD as the default identity store so that OAM can find user from the store and set the header .
    But when there are two totally different AD domains with different users , there will be a question. That is , I can only set one AD domain as the default identity store. So when I use the other AD domain to visit webgate protected resource, OAM notice me the the user/password error. But if the AD user exist in both AD domains, it will be OK, because the user mapping is finished correctly.
    logs here:
    [2011-07-26T22:19:18.599+08:00] [oam_server1] [ERROR] [OAMSSA-20040] [oracle.oam.user.identity.provider] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: cbefca7cded5e992:3fca7bfd:131657b3817:-8000-0000000000000c19,0] [APP: oam_server] Could not modify user attribute for user : sAMAccountName, attribute : smicer, value : {2} .
    [2011-07-26T22:19:18.600+08:00] [oam_server1] [ERROR] [] [oracle.oam.engine.authn] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: cbefca7cded5e992:3fca7bfd:131657b3817:-8000-0000000000000c19,0] [APP: oam_server] Failure getting users by attribute : sAMAccountName, value : smicer.[[
    oracle.security.am.engines.common.identity.provider.exceptions.IdentityProviderException: OAMSSA-20016: Failure getting users by attribute : sAMAccountName, value : smicer.
         at oracle.security.am.engines.common.identity.provider.impl.UserProviderImpl.getUsersByAttribute(UserProviderImpl.java:342)
         at oracle.security.am.engines.common.identity.provider.impl.IdentityProviderImpl.getUsersByAttribute(IdentityProviderImpl.java:656)
         at oracle.security.am.engines.common.identity.provider.impl.OracleUserIdentityProvider.getUsersByAttribute(OracleUserIdentityProvider.java:288)
         at oracle.security.am.engine.authn.internal.executor.KerberosModuleExecutor.execute(KerberosModuleExecutor.java:254)
         at oracle.security.am.engine.authn.internal.executor.AuthenticationSchemeExecutor.execute(AuthenticationSchemeExecutor.java:94)
         at oracle.security.am.engine.authn.internal.controller.AuthenticationEngineControllerImpl.validateUser(AuthenticationEngineControllerImpl.java:261)
         at oracle.security.am.engines.enginecontroller.AuthnEngineController.authenticateUser(AuthnEngineController.java:669)
         at oracle.security.am.engines.enginecontroller.AuthnEngineController.processEvent(AuthnEngineController.java:294)
         at oracle.security.am.controller.MasterController.processEvent(MasterController.java:354)
         at oracle.security.am.controller.MasterController.processRequest(MasterController.java:517)
         at oracle.security.am.controller.MasterController.process(MasterController.java:457)
         at oracle.security.am.pbl.PBLFlowManager.delegateToMasterController(PBLFlowManager.java:209)
         at oracle.security.am.pbl.PBLFlowManager.handleBaseEvent(PBLFlowManager.java:147)
         at oracle.security.am.pbl.PBLFlowManager.processRequest(PBLFlowManager.java:107)
         at oracle.security.am.pbl.transport.http.AMServlet.handleRequest(AMServlet.java:168)
         at oracle.security.am.pbl.transport.http.AMServlet.doPost(AMServlet.java:133)
         at oracle.security.am.pbl.transport.http.AMServlet.doGet(AMServlet.java:673)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:707)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
         at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
         at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
         at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
         at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:183)
         at weblogic.servlet.internal.RequestDispatcherImpl.invokeServlet(RequestDispatcherImpl.java:523)
         at weblogic.servlet.internal.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:253)
         at oracle.security.am.pbl.transport.http.CredCollectServlet.getCredentials(CredCollectServlet.java:148)
         at oracle.security.am.pbl.transport.http.CredCollectServlet.doPost(CredCollectServlet.java:84)
         at oracle.security.am.pbl.transport.http.CredCollectServlet.doGet(CredCollectServlet.java:71)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:707)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
         at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
         at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
         at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
         at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at oracle.security.am.agent.wls.filters.OAMServletAuthenticationFilter.doFilter(OAMServletAuthenticationFilter.java:265)
         at oracle.security.am.agent.wls.filters.OAMValidationSystemFilter.doFilter(OAMValidationSystemFilter.java:133)
         at oracle.security.wls.oamagent.OAMAgentWrapperFilter.doFilter(OAMAgentWrapperFilter.java:120)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:111)
         at java.security.AccessController.doPrivileged(Native Method)
         at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
         at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:413)
         at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:94)
         at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:161)
         at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:136)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3715)
         at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3681)
         at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
         at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
         at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277)
         at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)
         at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
    Caused by: oracle.security.idm.ObjectNotFoundException: No User found matching the criteria
         at oracle.security.idm.providers.stdldap.util.DirectSearchResponse.initSearch(DirectSearchResponse.java:174)
         at oracle.security.idm.providers.stdldap.util.NonPagedSearchResponse.<init>(NonPagedSearchResponse.java:52)
         at oracle.security.idm.providers.stdldap.util.NonPagedSearchResponse.<init>(NonPagedSearchResponse.java:43)
         at oracle.security.idm.providers.stdldap.util.LDAPRealm.searchUsers(LDAPRealm.java:489)
         at oracle.security.idm.providers.stdldap.LDIdentityStore.search(LDIdentityStore.java:274)
         at oracle.security.idm.providers.stdldap.LDIdentityStore.searchUsers(LDIdentityStore.java:367)
         at oracle.security.am.engines.common.identity.provider.impl.UserProviderImpl.getUsersByAttribute(UserProviderImpl.java:314)
         ... 57 more
    It seems OAM must set the AD as "default user store " , and only if so , AD domain users can login to webgate protected resources by kerberos .
    So, how can I make 2 AD available together ? Can you kindly give some advice? It will be very appreciated.
    Thanks !!

    1) Should my setup be defaulting to 32-bit compilersYes. On Solaris compilers generate 32-bit code by default
    2) I have read that adding -m64 to the compile command will make it 64-bit, is this accurate?It will make compiler produce 64-bit binaries.
    Compiler itself will stay 32-bit ;-)
    3) Is there a way to set the compilers to default to 64-bit so that the user doesn't have to specify -m64?No. At least no compiler-specific way. Only UNIX general tricks (shell alias, shell script etc)
    4) Does everyone just use -m64 and forget about it?Yep. They have no choice

  • Setting the update batch of entity at runtime....

    Hi ,
    Is it possible to set the update batching of entity records at runtime when the number of entity instances exceeds a specified number....????
    In other words , to simulate the check the checkbox "Update Batching" of the "Tuning" window of the property sheet of an entity.....in JDev 10.1.3.....
    Many thanks ,
    Simon

    Isn't it possible...????
    Greetings,
    Simon

  • What's the advantage of MainStage 2 over Logic 9?

    What's the advantage of MainStage 2 over Logic 9? Is MS 2 lower latency or quicker to switch 'presets'. I'm wondering what the absolute lowest latency is with a fast new mac running only Amp Designer & a few other Logic plugins, and the quickest switching time/dropout between 'presets' would be?
    If you have any idea, pray tell! :o)
    Thanks

    I don't think there's any particular computer processing advantage of one over the other; the main goal of Mainstage is to provide an interface for Logic's functionality that's useful for live performance (easier to see, easier to manipulate real-time control, easier to set up for an onstage performance with hardware instruments, easier to switch in a live context between instruments or patches, etc.).
    If you've used Ableton Live at all, or read about it, in some ways Mainstage is more comparable to Ableton; however, they're still very different. Ableton is much more heavily loop-based, and as someone knowledgeable has said, is almost a kind of instrument unto itself. Mainstage, in my opinion, is more of an interface reorganization of what Logic offers -- an excellent one at that, but with different goals from Ableton.

  • How to set the Maximum Number of the retry interval in sender cc?

    Hi,gurus:
    You know about how to set the Maximum Number of the retry interval of receiver communication channel in RWB.
    But how to set the one of the sender communication channel?
    Can we set that in integration directory?
    Any help will be appreciated.

    Hi,
    Check this blog, For the settings to be done at SXMB_ADMIN Tuning(IS_Retry_Limit )and the VA
    XI :  How to Re-Process failed XI Messages Automatically
    Also in VA change both inbound and outbound retries. For max no. of retry interval change the default value 300000(5 mins) to 600000(10 mins) or whatever you want.
    Thanks!
    Edited by: Sudhir Tiwari on Dec 16, 2008 7:33 AM

  • How do I replace someone else's Mac ID with my own? Bought iPhone second hand. Previous owner re-set the phone but his ICloud account stayed on now my phone. He uses his macID on his new iPhone now?? Any ideas, as this issue is blocking my access to iTune

    How do I replace someone else's Mac ID with my own?
    Bought iPhone second hand on TradeMe.
    Previous owner re-set the phone but his ICloud account stayed on now my phone. He uses his AppleID on his new iPhone now and, understandably, does not want to give me his password. Any ideas?? Please.
    This issue is blocking my access to iTunes and any other file from my home computer. It keeps on telling me that I have to autorise my computer to pass on files, yet, it seems, for all this to happen, I need to get logged in through the phone's Apple ID. This of course is different to my one on my computer - and I have no password for it.
    This phone is not stolen!! I payed still a fair bit for it. Am still in contact with the previous owner. He doesn't know how to fix the problem either.
    Would appreciate any suggestion ????
    Thanks
    SamSings

    Settings>general>resets>erase all content and settings.
    That will put it back to its out of the box state. Set it up with your own apple Id.

  • Set the cursor busy steered by supanel vi

    I let run a vi and there is a subpanel. Is there a way that I can set the cursor busy steered by the subpanel vi. I pass the reference of the mainvi over a global variable into subvi. Without success there is no error message but the busy cursor does not appear. Just setting the cursor in subvi creates a null window error. Is there a easy way to implement it. Or do I have to use user events in main vi called by suvi an then se it busy. Would be not so nice to understand it later.
    kind regards reto

    I attach my test VI (LV 8.0). You can try it.
    Attachments:
    test sub.vi ‏17 KB
    test.vi ‏22 KB
    test global.vi ‏4 KB

  • In an Excel template file, can I set the Folder Path in the SaveAs Dialog box?

    I have an Excel template file (xltm) and, with help from the forum, I now have a Workbook_BeforeSave subroutine to save the template as a macro enabled file (xlsm).  I’m so thankful for that help from Edward in the forum.
    I also want to set the default folder location to save the file. I really only need it when the template is saved as a new xlsm file, because if they open the xlsm file, it’s usually opened from the default folder path so any save would normally go back
    to where the file was opened.  However, with a template (even if the template is in the default folder) the Saved template reverts back to the user’s documents folder.
    Is there a good way to do this?
    I tried to modify the Workbook_BeforeSave code like this:
    Private Sub Workbook_BeforeSave(ByVal SaveAsUI As Boolean, Cancel As Boolean)
    Dim FolderDir As String
    Dim FileNameVal As String
    FolderDir = "Z:\save\data\place\"
    If SaveAsUI Then
    If Dir(WorkBookFolder, vbDirectory) <> "" Then
    Application.DefaultFilePath = WorkBookFolder
    End If
    FileNameVal = Application.GetSaveAsFilename(, "Excel Macro-Enabled Workbook (*.xlsm), *.xlsm")
    Cancel = True
    If FileNameVal = "False" Then 'User pressed cancel
    Exit Sub
    End If
    ThisWorkbook.SaveAs Filename:=FileNameVal & ".xlsm", FileFormat:=xlOpenXMLWorkbookMacroEnabled
    Application.EnableEvents = True
    End If
    End Sub
    But there are a lot of checks that would need to be done.
    I'm not sure how to only default the folder saved only when they open the template, but not change it when they just open an already saved Excel file created by the template (with all the active content, macros, etc.).
    Alan Edwards

    Hi Alan,
    store the path\filename in the 1st argument:
    FileNameVal = Application.GetSaveAsFilename("C:\*.xlsm", "Excel Macro-Enabled Workbook (*.xlsm), *.xlsm")
    Andreas.

  • Setting the JMS Header from Payload

    Hi Experts,
    My requirement is to send the payment data coming from ECC to non sap system.Sender adapter is proxy and receiver is JMS.ECC will be sending the filename in one field and payload content as a string in another field.PI has to set the filename coming from ECC in JMS header property.What configuration changes should i need to make in JMS adapter to achieve it?
    Converting the XML to string is possible in PI.But my question is converting the string XML data into XML fields is possible in SAP PI?If so how to do that?
    Please provide your suggestion.
    Regards,
    Karthiga

    Hi Karthiga,
    The UDF is there in blog
    DynamicConfiguration dynamicconfiguration = (DynamicConfiguration)param.get("DynamicConfiguration");
                DynamicConfigurationKey dynamicconfigurationkey = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/JMS", "DCJMSMessageProperty0");
                String s = dynamicconfiguration.get(dynamicconfigurationkey);
                CorrID.append(s);
    Please let me know if you have any issue.
    regards,
    Harish

  • Unable to set the Cursor focus on a particular field in OA Page

    Hi,
    I have a custom page with 3 controllers . Now when i delete a row from the Advance table, the focus of the cursor goes to the top of the page. My requirement is that, the focus should remain in the Advance table region itself.
    I tried to set the focus using the below code. It dosent work. Could there be an issue since iam using more than one controller for the page?
    OABodyBean bodyBean = (OABodyBean)pageContext.getRootWebBean();
    bodyBean.setInitialFocusId("item164"); // item164 is the messageTextInput field in the Advance table region.
    I tried to get the Initialfocus value after its set. The value shows as 'item164'. However , it doesnt focus on that item.
    Please help me out in fixing this issue.
    Thanks
    AG

    Hi,
    Thanks for the Info. Can you help me with this java script or if you can provide me any reference it would be hepful.
    Basically the focus has to stay in that particular AdvanceTable region where the row is deleted. Not required that the focus has to point to the next row after the delete.
    Thanks
    AG
    Edited by: 928445 on Apr 26, 2012 12:06 AM

  • Unable to 'set the default source system' to Install Business Content

    Hi,
    Maars here. This is my first post hoping that in future ones I'll also be lending a helping hand.
    I am trying to 'Install Business Content' under the BUSINESS CONTENT section in txn RSA1. I am doing this after 'Transfer Data Sources' in R/3 and I can now see all the data sources (under the application component hierarchy) for the source system. But I am not able to see the Info Objects in the Business Content.
    When I try to set R/3 as the default source system (got this screen after clicking a icon in the standard tool bar), BW is not saving the settings ie., I set the R/3 as the default and then click on OK. If I go back to the same screen again, I find that my settings were NOT saved.
    Could you please help me out?
    Thank you.

    Hi,
    It seems to be a bug in version 3.5.
    Do like this:
    After you open the screen to <i>choose the dafault source system</i>
    Clcik on 3rd button(F6) available in the bottom of the scrreen.
    And then select teh tick mark for required system.
    And then click on Continue button
    You have do this step before you drop the cube to right side of the cube.
    Ok, even after all these steps , if you reopen the screen you would not see Tick mark u have done just before. DONOT WORRY ABT it.
    Drag and drop required cube with dat flow before.
    Now you can see the Transfer rules with selected Source system only in the collected Objects.
    With rgds,
    Anil Kumar Sharma .P

  • How to set the table input in Query template?

    Hi all.
    I need to call a Bapi_objcl_change, with import parameter and a table as an input. I have done this, in BLS. I have set the table input in the
    form of xml. In BLS, I get the output(the value gets change in SAP R3, what i have given in BLS).  But if i set the same xml structure  in
    query template, I didn't get the output. Table input parameter does not take that xml source.  How to set the table input in Query template?
    can anyone help me?
    Regards,
    Hemalatha

    Hema,
    You probably need to XML encode the data so that it will pass properly and then xmldecode() it to set the BAPI input value.
    Sam

  • How to set  the  table I_ORG in 'BBP_EXTREQ_INBOUND'?

    dear all,
      Now I am using BAPI 'BBP_EXTREQ_INBOUND' to create a shopping card and have successed.
      but  in the table I_ORG,   whatever I set the value of  organization ID and group ID, it will not be changed in the SRM.
    how can I set them?
       t hank you!

    hi ,
    you can use BADI --> BBP_PGRP_ASSIGN_BADI in your SRM system and make changes according to your own requirements.
    if you make changes using the above BADI --> then changes should be updated in the newly created shopping cart.
    this is because , the above BADI is called ---> in the
    BAPI 'BBP_EXTREQ_INBOUND' .
    check out the following sequence --->
    BBP_EXTREQ_INBOUND ---> calls
    FM BAPI_SCEC_CREATE ---> calls
    {BAdI - BBP_PGRP_ASSIGN_BADI -
      PERFORM sc_pgrp_assign_badi TABLES lt_i_items             "XMZSP02AO
                                         lt_i_account           "XMZSP02AO
                                         lt_i_partner           "XMZSP02AO
                                   USING ls_i_header            "XMZSP02AO
                                CHANGING lt_i_orgdata[]         "XMZSP02AO
                                         return[].              "XMZSP02AO

  • Unable to set the selected value for a ADF LOV

    Hi,
    I am developing an application using jdeveloper 10.1.3 and Struts.
    I have created a ADF LOV on my JSP Page as given below:
    <html:select property="lob" onchange="javascript:selectLOB(this.form)">
    <html:optionsCollection label="prompt" value="index" property="lob.displayData"/>
    </html:select>
    When i submit the form, i am able to get the value of the selected Value in the List.
    JUCtrlListBinding listBinding = (JUCtrlListBinding) formBean.get("Lob");
    Row r = (Row) listBinding.getSelectedValue();
    String SoLob = (String) r.getAttribute("LobLob");
    But i am unable to set the selected value back in the list when i return to the form again.
    I tried the following:
    int x = listBinding.getSelectedIndex();
    listBinding.setSelectedIndex(x);
    It would be really helpful if some one could let me know what needs to be done.
    Thanks,
    Subashini

    Gyan,
    I tried with the code you suggest , its trying to set the value of a field, but my requirement is to change the property for
    "Rendered" on the field so that based on search parameters we can hide result table column.
    After searching online, I modified the controller code as follows
    1.Created a new transient attribute (Testrender) with type "Boolean" and always updateable.
    2.changed the "Rendered" property value on the field I want to hide as ${oa.PoSearchVO1.Testrender}.
    3. Modified the controller code as follows :
            OAApplicationModule am = pageContext.getApplicationModule(webBean);
            OAViewObject testvo = (OAViewObject)am.findViewObject("PoSearchVO1");
            OADBTransaction txn = am.getOADBTransaction();
            if (testvo != null)
              OARow row = (OARow)testvo.first();
                if (a.equalsIgnoreCase("Approved"))
                     row.setAttribute("Testrender", Boolean.FALSE);
                else
                     row.setAttribute("Testrender", Boolean.TRUE);
            } But now when i run the page and populate the search field and click "Go" its hiding the field but throwing the following error and the search results are also bad.
    Its using only the value of one search parameter but not the second one .
    The search cannot be executed because the table has pending changes that would be lost. I think the vo is getting dirty when I update the transient attribute value. So I used txn.rollback ,then search is working fine but its not hiding the field.
    So can you please let me know how to proceed from here ?

Maybe you are looking for