Setting time and date on Apple tv

After I restored my Apple TV I can't access it, because it stuck on " setting date and time". I tried to set the time and date
manually but it wont work. When I type my Apple ID to test the network or for home sharing it says wrong I'd or password. I have restarted my Apple TV but
no luck

Setting date and time

Similar Messages

  • Constantly being asked to set time and date (Apple TV 2nd Gen)

    I am constantly being asked to set time and date on my Apple TV 2nd Gen. Has anyone had this problem? I get the screen with this message about 10-15mins after I connect to my home network. I connect, everything works fine, but then streamin, browsing stop and this screen appears. Any help would be appreciated.
    Thanks!!

    what if you try something simple as to restart your phone and check again. 
    "I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

  • HT1600 I have an apple tv  about two years old. Bought for a present and they never took it. I tried to hook it up cut it get stuck on setting time and date. Any help?

    I have an apple tv  about two years old. Bought for a present and they never took it. I tried to hook it up cut it get stuck on setting time and date. Any help?

    If you can view the main home screen, try selecting "settings" on the far right, then choose recent at the bottom. If not, try just unplugging power for a few minutes, then plug in and try again. Keep in mind you'll need a wireless connection and there may be several updates. Hope this helps-

  • I'm in the activation process for setting time and date but been stuck in that screen for a while please help

    just installed my Apple TV and it's been in the activation screen to set time and date for a while .
    not sure what the issue is

    It's not properly connected to the network
    Make sure location is set correctly
    DNS should be on auto (settings - general - network)
    If on wifi try Ethernet
    Check that router has port 123 open (refer to manual if unsure)

  • Unable to set time and date

    im trying to set up my apple tv just after ive updated to the latest version, but it wont pass the setting time and date screen
    what can i do?
    HELP!

    Hello john.george,
    You may need to verify that TCP port 123 is open and available for use on your router.
    TCP port 123 is used to communicate with a network time server.
    Apple TV: TCP and UDP ports and protocols used
    http://support.apple.com/kb/HT2463
    Cheers,
    Allen

  • How long should setting time and dates take?

    I have hooked up my apple tv, and it is still "setting time and date" after 2 hours.
    How long should it take?

    You have a network problme.  ATV is not able to connect to the internet, so it is not able to set it's date and time.

  • KDE: Setting time and date automatically

    I've never been able to set the time and date automatically in KDE time settings. When I check the "Set time and date automatically" and authenticate myself, I always get the error message "Unable to contact time server: .". I'm wondering whether it's an upstream bug or I'm missing some required package? Does it work for you?

    matt101 wrote:I don't get it i have installed ntpd using pacman -S ntp . And then after it installed I restarted my computer and i still can't change the time to London and am still getting the "Unable to contact time server" error. Am i misinterpreting this or what? Could somone please explain to me in simple terms how to make the KDE clock show London time?
    Have you set ntp correctly?
    Also go to http://www.pool.ntp.org/en/use.html you'll have all the answers there.
    in short try this:
    ntpq -p
    If nothing happens you did something wrong, if it does, then it already works just remove ntpd or openntpd from daemon array.

  • Apple stays on setting time and date after restore

    apple tv stays on loading setting time and date

    It is having trouble connecting to the network. Make sure location is set correctly. DNS should be on automatic (settings - general - network). If on wifi try ethernet.

  • Why my atv can't set time and date after restoring it using itunes ?

    when my atv restarting after  I restored it using iTunes, it can't set the time and date.
    the atv is connected to the net by wi - fi.
    when I try to sign in using my apple id, I get a massage that the password is incorrect.
    I have apple tv with ios 7.

    The network and signal test on device won't give the full picture, for that you need a network report. Go to istumbler, netstumbler or similar, that will show true signal strength as well as any nose detected. You can also try Ethernet to help rule out WiFi issues.

  • Set time and date not working

    Set up time and date is not working, since I changed settings from Saudi Arabia to USA...want time and date from USA?!

    You need to set your location to where you are, not where you might like to be.

  • Can not set time and date fax setting on officejet 4620

    Can not set the time and date on Officejet 4620 when faxing.  There are no setup options available.  The log always shows "Jan 00  00:00 AM".

    The time and date setting should be under the setup tools or fax setting in the printer control panel.1. Click the wrench icon on the control panel of the printer.
    2. Scroll to Tools.
    3. Scroll to Time and date.

  • HT202157 setting time and date?

    I am having a problem getting online and the Network time is not set?

    Welcome to the Apple Community.
    Assuming this is not the first time you have used your Apple TV
    You might try restarting the Apple TV by removing ALL the cables for 30 seconds.
    Also try restarting the router. (Also try removing it’s power cord for at least 30 seconds)
    If the problem persists, try a restore, you may want to try the previous procedures several times before doing this.
    If restoring from the Apple TV doesn't help, try restoring from iTunes using a USB cable.
    If this is a new Apple TV, in addition to trying the above, it may also be that your network router is not allowing access to the timeserver, check that your router allows access over port 123.

  • Apple Tv (3rd. Gen) connect to network but didn't set time and date so...

    Hi.
    Fist of all,  the device previously working fine. It works really nice since December 2011 until september 2012.
    We were on vacation so, I disconnect some devices in my house, including the Apple tv.
    I reconnect it after several weeks. Works fine, but one week later, after another re-connection, it restarted, show the apple logo, but stays permanently in Setting date and time.
    After three more reconnection, I check for the network. It is connected to the network via wifi, plays via Airplay everything from the Iphones anf the Ipads, but it is unable to set Date and Time. We check the modem and the router. Everything is working fine, but the Apple Tv refuses to set Date and Time, so, we can't see the others computer's libraries, no iTunes, no Radio, no nothing from the Internet.
    The computers (three MacBook Pros, one Sony Vaio PC, and two iPads, one first and one third generation) are with the last Operative Systems. Also the Apple TV have the last update, because I restore it. We also checked the Home Share account, and all the computers have it working fine.
    So, what happens?
    It is general, or is this a single case?
    If somebody know about a similar case, and have the solution, I'll appreciate the advise.
    Thanks.
    Giovanni Pizuorno C.

    Hi.
    Fist of all,  the device previously working fine. It works really nice since December 2011 until september 2012.
    We were on vacation so, I disconnect some devices in my house, including the Apple tv.
    I reconnect it after several weeks. Works fine, but one week later, after another re-connection, it restarted, show the apple logo, but stays permanently in Setting date and time.
    After three more reconnection, I check for the network. It is connected to the network via wifi, plays via Airplay everything from the Iphones anf the Ipads, but it is unable to set Date and Time. We check the modem and the router. Everything is working fine, but the Apple Tv refuses to set Date and Time, so, we can't see the others computer's libraries, no iTunes, no Radio, no nothing from the Internet.
    The computers (three MacBook Pros, one Sony Vaio PC, and two iPads, one first and one third generation) are with the last Operative Systems. Also the Apple TV have the last update, because I restore it. We also checked the Home Share account, and all the computers have it working fine.
    So, what happens?
    It is general, or is this a single case?
    If somebody know about a similar case, and have the solution, I'll appreciate the advise.
    Thanks.
    Giovanni Pizuorno C.

  • HT202157 How can I set time and date in the Apple TV???  This step doesn't let me go on with installing itunes!

    The area is set for San Juan, PR, but it doesn't recognize the date and time.

    This indicates a network issue.  Ensure DNS settings are set to Automatic and the regional settings are correct.

  • New Apple TV cannot set time and date. Have unplugged both router and Apple TV, have gone to settings could not restore  , but could reset again stuck on date and time . Suggestions

    Date time Apple TV

    Welcome to the Apple Community.
    If this is a new Apple TV, in addition to trying the steps already taken, it may also be that your network router is not allowing access to the timeserver, check that your router allows access over port 123.

Maybe you are looking for

  • How to change a value with reference if inside of a tabControl?

    Hello, i have a Vi with a tabcontrol and two pages. On each page is a string-control (string1 and string2). Now i have second vi that gets the file-reference of the first vi and is called inside of the first vi. This reference do i want to use to cha

  • Flash player worked for months but now I have audio but no video / Windows 8 / Help

    Flash player worked for months.  But today suddenly the video part stopped working.  So I have audio and a blank screen.  This is across all applications: youtube, live streaming, etc.

  • Can Standalone OC4j 11g TP4 be runned on RedHat Linux  ?

    Hi , i have a web application(ADF/ADF Faces) developed with JDev 11g TP4. Iwant to install and run it on Standalone OC4J 11g, under Linux RedHat OS. In the OC4j release note it's written "Requires SUN JDK 5.0.11". However i want to ensure that the on

  • How to open Word Document using java?

    Respected Sir/ Madam, I am doing my project in Network Security using java. I have to transfer the files from server to the client. Each transferred file should have some of the access privileges such as read, write and exeucte. If the transferred fi

  • FI Validation Rules on Travel Documents

    FI Validation Rules on Travel   Posted: Jan 3, 2008 11:51 PM     Edit      E-mail this message      Reply  Hi experts. I am working in a project where Travel and Fi are in different systems. I am using IDocs ACC_EMPLOYEE_PAY02, ACC_EMPLOYEE_EXP02 and