Setting up a mail server and the client

Hi! I'm setting up a mail server on a virtual server (VMware Fusion 2.0.5) and I've a lot of problems. how to set up a mail account with the workgroup manager?? I create accounts but it doesn't appears on Server Admin in the mail service. And how to configure the email for an account ?
the short name is "it" and in the mail tab the mail server is "my.resolveme.com"
The mail address for this example is: [email protected]
please help me!!!

Hi,
Do you speak french ?
This is my records for the dns :
A mail.sebas.resolveme.com 153.109.XX.XX
MX sebas.resolveme.com mail.sebas.resolveme.com
What is the name for the server : mail or other ?
Second problem : I tried to send a mail by telnet. It's ok, the mail is queud. But if I go with outlook to see my mail box I can't see nothing
We are ok for the mail of the client : it's shortname @ the name in WGM (like sebas.resolveme.com)
Thanks for the answer !

Similar Messages

How do I set up a mail server and SMTP server to send messages to other mail servers at mavericks

How do I set up a mail server and SMTP server to send messages to other mail servers at mavericks

You need to get the settings for your email from your email provider and enter them in Internet Accounts (System Preferences). Many of the common systems are already available, all you need is a password and an email address to set them up.

HT201320 What am i supposed to put as the incoming mail server and the outgoing mail server when setting up my email?

I'm tryingt to set up my email through my school account and i'm not sure what it means when i'm asked to enter a incoming mail server and an outgoing mail server. Help would be appreciated thanks

Since no one here has any idea about what type of mail your school offers...you don't mention what school...your question, as asked, can't be answered. What don't you contact your school's IT dept., or look online. Most schools have instructions on how to do so online.

Setting up yahoo mail server as the outgoing mail server

pls how do i set up the yahoo mail server as the outgoing(smtp) mail server for in the enterprise manager for email notfications?
i entered the following values
Outgoing(SMTP)mail server : smtp.mail.yahoo.com
Identify Sender as: Sysman
Sender's email address: [email protected]
After clicking the Test mailserver button, the test failed.
i got the following error message below
smtp.mail.yahoo.com: Test failed with message: "Sending failed; nested exception is: javax.mail.MessagingException: 530 authentication required - for help go to http://help.yahoo.com/help/us/mail/pop/pop-11.html
i have visited the link but i dont seem to get any meaningful help.
pls can anyone help me?

user536860 wrote:
it should works, if you use the following parameters:
Smtp server: smtp.mail.yahoo.com:465
User Secure connection: SSL
I'll bet you it will NOT work & even give you 10 to 1 odds that it will fail.
Yahoo won't relay your spam; which is why your messages will be rejected.
What is the difference between your message & a message from a spammer?

Strange problem with AIX server and windows clients

I am having a real bizzare problem with WLS 7.0.1 running on AIX 5.1 and
clients on windows. We have J2SE Swing application as a client.
If the client is w2k or XP, the first client gets good response. If I start
another client the second client is horribly slow (2 sec vs 16 sec). Even if
I kill the first client the second client continues to be slow. If I have 2
clients open together, the first one continues giving 2 sec response while
the second one continues with 16 sec. For that matter if I start another
client after shutting down first one I get slow (16 sec) response.
If the client is NT client I always get good and consistent response from
the server. Irrespective of how many client I have on the NT machine, I keep
getting good response. NT and W2K laptops are seating right next to each
other on the same n/w and infact the NT is a much slower and lessor memory
machine than W2K.
We did similar tests keeping server on Solaris or NT server or W2K server,
and the clients "behave" normally i.e I get consistent repsponse time (it
may be slow or fast, but it is consistent and is consistent b/w NT and W2K).
We even tried putting my laptop on the same network as the AIX server, but
it did not help. Unfortunately some of our clients will be using AIX and
W2K.
HELP!!!!

"Cameron Purdy" <[email protected]> wrote in message
news:[email protected]..
Sounds like a reverse DNS lookup or similar network timeout.Thanks for the suggestion, but then why would the first client on w2k or XP
get a better performance and the subsequent clients get worse performance?
>
Peace,
Cameron Purdy
Tangosol, Inc.
http://www.tangosol.com/coherence.jsp
Tangosol Coherence: Clustered Replicated Cache for Weblogic
"vinay moharil" <[email protected]> wrote in message
news:[email protected]..
I am having a real bizzare problem with WLS 7.0.1 running on AIX 5.1 and
clients on windows. We have J2SE Swing application as a client.
If the client is w2k or XP, the first client gets good response. If Istart
another client the second client is horribly slow (2 sec vs 16 sec).
Even
if
I kill the first client the second client continues to be slow. If I
have
2
clients open together, the first one continues giving 2 sec response
while
the second one continues with 16 sec. For that matter if I start another
client after shutting down first one I get slow (16 sec) response.
If the client is NT client I always get good and consistent responsefrom
the server. Irrespective of how many client I have on the NT machine, Ikeep
getting good response. NT and W2K laptops are seating right next to each
other on the same n/w and infact the NT is a much slower and lessor
memory
machine than W2K.
We did similar tests keeping server on Solaris or NT server or W2Kserver,
and the clients "behave" normally i.e I get consistent repsponse time(it
may be slow or fast, but it is consistent and is consistent b/w NT andW2K).
We even tried putting my laptop on the same network as the AIX server,
but
it did not help. Unfortunately some of our clients will be using AIX and
W2K.
HELP!!!!

How to set up a mail server with a private DNS and relay over a public mail

How to set up the mail server that we can send and pick up emails inside and outside?
Our private network has the DNS name dnsname1.private.
We have our privat DNS Server and he can forward requests to outside over our router.
Our public emails are hosted by an internet provider. This dns name is dnsname2.com and dnsname2.org.
How we have to set up our mail server that we can pick up our emails from our public dnsname2.com?
And when we write an email how we have to set up it that the dnsname is dansname2.com and not dnsname1.private?

If you want to move your mailservice to your own (internal) server, start by making sure you can recieve traffic on port TCP 25 (SMTP). Some ISPs blocks this port, especially on "non business" connections.
Can you send mail from your LAN directly to where your mail is hosted using port 25 TCP or do you have to relay via your ISP?
You have a static public IP?

I set iCloud up last week and the next day when out in the field I could not get Outlook to open up. I want to change my settings so I can get mail at home or in the field

I set iCloud up last week and the next day when out in the field I could not get Outlook to open up. I want to change my settings so I can get mail at home or in the field, not just when i'm at home. I have a PC and fios internet with Verizon at home. I have a Sprint air card in the field or access an available wifi. I want to change my settings to allow for receiving email in the field. What's the point of an air card and icloud for backup fi it doesn't work in the field for some odd reason?

Apple - Support - Mail Setup Assistant

I have AOL as my mail-server and any photo I am trying to attach and send will not open no matter what I try.It say that the format the attachment is not recognised.d.

I have AOL as my mail-server and any photo that I am trying to attach will not open.The photos are in iPhoto and the message say that the format is not being recognized.AOL delivers the photos but they cant be open.

Where exactly did you buy the "new iPhone "
A country might help as well .This is a WW forum
Are Direct Mobiles an Approved Apple iPhone reseller if not it may well be a fake

[SOLVED] setting up a Mail server - advice and or warnings

I am about to set up a mail server for family (about 10 accounts) and could do with some advice on what to use, how to set it up and how to protect it from becoming a zombie spam server.
I have courier functional now.
Last edited by Cheifchimp (2010-06-20 06:27:20)

I use postfix. Plenty of howto's and documentation at http://www.postfix.org/documentation.html.
You can check you are not an open relay at http://www.mxtoolbox.com/diagnostic.aspx

Mail error "Verify that you have addressed this message correctly. Check your SMTP server settings in Mail preferences and verify any advanced settings with your system administrator.Select a different outgoing mail server from the list"

The Mail application has suddenly started giving error:
"Verify that you have addressed this message correctly. Check your SMTP server settings in Mail preferences and verify any advanced settings with your system administrator.Select a different outgoing mail server from the list"
It was working fine till yesterday, suddenly it stopped. I have 3 email accounts configured here, 2 are on exchange servers and one yahoo. Connection verification works and shows all servers as green.
Any inputs?

I had 3 accounts, 2 ms exchange accounts and 1 yahoo. After removal of yahoo, everything is back to normal.
Regards
Rohit

If I move a mailbox from my imap account to "on my mac" can I safely delete the folder from the mail server and still be able to read the messages?

If I move a mailbox from my imap account to "on my mac" can I safely delete the folder from the mail server and still be able to read the messages?

You certainly can.
Be aware that the emails you move to local storage ("on my Mac") will be the only copies that remain.

The MS15-10 Security Update for Windows Server 2012/R2 Essentials and the Client Restore Functionality

The MS15-10 Security Update for Windows Server 2012/R2 Essentials and the Client Restore Functionality - The Windows Server Essentials and Small Business Server Blog - Site Home - TechNet Blogs:
http://blogs.technet.com/b/sbs/archive/2015/03/13/the-ms15-10-security-update-for-windows-server-2012-r2-essentials-and-the-client-restore-functionality.aspx
FYI

Hi Susan. I hope there's a better 'fix' coming to replace this "uninstall the updates, restore, then reinstall the updates after the restore". This kind of workaround requires that all of us remember that there's a problem
with KB3023562 and KB3004375 from now until the end of WS2012E. Not sure I'll remember this 6 months from now when the problem crops up during a restore. -:(
Merv Porter
=========================

How to set up my mail server

I have a Mac Mini with Mac OS X Lion Server 10.7.2 at home. I'm trying to move away from a Windows SBS 2003 with MS Mail Exchange 2003. Because I learned this stuff by setting up the Windows Server, I am trying to follow a similar approach with the Mac Server. (I understand I may have to re-train may brain.) I set up the Mac Mini with a local domain. My setup is primarily for family use, so I did not see a need for registering a public domain. (I've had the Windows setup running since 2003 and all has been fine with that setup.) We have several desktops, and laptops around the house, so I want for everyone to be able to log in to any desktop/laptop they find and still be able to read/send e-mails under their own mail account and keep the mail folder structure they have created. I'm trying for Mac Mail Server to receive all e-mail for all users (mail is provided by our ISP - Verizon.net; some users have more than one e-mail address), for clients to pull mail from the Mac Mail Server (via Mac Mail, or MS Outlook), the clients would send mail ) via the configured SMTP locally, and all the mail forlders to synchronize back to the Mac Mail Server for when the user logs in from another machine. Is that possible? If so, how? I recall that in Windows SBS 2003 I configured a POP Connector that receives all the mail for all the users and I designated a domain user to send the mail to. MS Exchange would take care of sychronizing the mail folders between the client connection and the mail server. I bought the Mac Mini, a Time Capsule and an iMac to start my transition, but I'm not sure I'll be able to duplicate what I had with MS Exchange.

Sorry, I know it is more a microsoft problem, but it happened when I tried to set up my icloud mail on my pc.

Web host, mail server and FTP.

Dear all:
I have some questions and will try to make my post a short one (although the questions aren't exactly simple). I have the need to set up my own web server, e-mail server and FTP server. It is my understanding (and I remember setting another computer I had 2 or 3 years ago this way) that OS X can be used for this without the need to have OS X server installed. I don't need (at least not for the for the immediate future) to have a server for my own local network. Basically all I need is a single computer where (1) I can host multiple web sites, (2) I can host my own e-mail that will correspond in number to the number of web sites (domain names) being hosted and (3) I can set-up as a FTP server so that my clients can log on and download files.
I have used VirtualHostX for virtual hosting as well as PureFTD Manager with good results in the past. I've also found both to be easy to use, with a good and intuitive GUI which is essential for someone with as little knowledge as I have of networking. My question now as to do with e-mail and how to set-up Mac OS X to work as an e-mail server.
Are there any applications you would suggest that would be simple to use, have a simple and intuitive user interface and also provide mailing list services along with e-mail services that you would recommend ? I've looked at a few but most of the ones I have found seem to require command line input and this is something I am not comfortable with. I need an application with a simple interface and allows things to be set-up in a straight forward manner (and preferably free instead of paid).
What would be your recommendations for this project ? Any recommendations, advice and suggestions you can offer will be very appreciated.
Thank you in advance,
Joseph

Perhaps you should give people more time to answer.
1. You do not need a DNS on your server, ask the ISP to set up the MX record as they set up the A record.
2. Not really enough information in your setup to say either way, but as it takes seconds to do and you have everything else needed - set it up anyway.
3. Domain name: mydomain.com, Host name depends what you call it. If you don't have a name why not mail.mydomain.com and make you mx record point to that name. Perhaps that is what your A record is already.

How to setup iCal on a Lion server and its client machines?

I recently bought a new mini server (running Lion) in order to share our iCal calenders (like in the Apple presentations). I thought this would be an easy process but apparently it isn't. So what was I already able to achieve:
1) Set up 5 different clients (on the Lion server), with corresponding e-mailadresses and passwords.
2) Activated iCal on the server preference window (ical: on)
3) Tried to add the user a account on one of the five client machines => HERE it goes wrong.
My main issue is that I'm not able to add a user account on a client machine and have it connected to the server.
It would be really nice if someone could assist me with it.
Warm Regards

I posted additional information online using the newly created Launchpad login Service account.
I hope that explains my situation, if not I will add more detail here.
There is no problem, when ither of the two OS are used to enable printing with the HP Deskjet 2050 J510 series printer.
The problem begins when I try to print from the other OS , when connected to one of the Operating System.
I have tried without success to print from Windows 7 Ultimate 64-bit OS from an HP Deskjet 2050 J510 series connected to a Ubuntu 12.04 LTS server with Amahi (HDA), installed.
The same thing occurred when I tried to print from the Ubuntu server and the printer was connected to the Windows 7 Ultimate 64-bit running P.C.

Setting up a mail server and the client

Similar Messages

Maybe you are looking for