Setting up a WAP4400n as a repeater

I am trying to setup a WAP4410n as a wireless repeater in a remote area of my property and having much difficulty getting this accomplished. My wireless router is a WRVS4400N. Any help would be appreciated.

Hello Allen
Sorry to hear that your having an issue with this.
Not knowing exactly at which point your having issues, I am going to a quick run through of how it should be set-up.
1) Set up the first WAP4410N in Access Point mode and check the box that says: Allow wireless signal to be repeated by a repeater.
2) Enter the WIRELESS MAC Address of the second WAP4410N.
3) Make sure you get the wireless MAC from the status pages, not the wired MAC.
4) Set up the second AP in WDS Repeater mode and do a site survey.
5) When it locates the first AP, enter the security, etc. and it should establish a permanent wireless connection.
If this does not help, a little more information would help. What part of the process is not working? Does the WAP's connect and you just cant get an IP?
Please let us know.
Eric Moyers
.:|:.:|:. CISCO | Eric Moyers | Cisco Technical Support |
Wireless and Surveillance Subject Matter Expert
Please rate helpful Posts and Let others know when your Question has been answered
You can click my name beside the picture if you need to email me directly

Similar Messages

How to change calendar setting for one event in a repeating series?

Is there any way to change the calendar setting (color) for a single event in a repeating series without changing the color of all events in that series? It seems one event in a repeating series is linked to all other events in that series even if you change the time and/or date first.
The only workaround I've found is to create a new event Identical to the event in question except with the different calendar, then delete the original event. This would be a lot easier if the OS would ask the user if s/he wants to apply the calendar change to all future events or just this one. Or if there was a way to more easily duplicate a single event, that would also save me a lot of time.
Thanks for any responses.

The assignment of colors to calendars on your iPad is pretty simplistic. You can set a color for each calendar and all events (repeating or single instance) placed in a calendar use the calendar's color; however, you cannot set a color for one instance of a calendar event. The workaround you came up with is similar to the method I use. I have a calendar labeled "Priority Events" (Red) that I use for important instances of standing meetings. Oftentimes I leave the event in question in the calendar and simply place a priority event in the same time slot; it clutters up the calendar a bit but helps me visually.

How do I set Airport Express to work as repeater?

How do I get my Airport Express to work as a repeater for my Apple TV, iPhones and iPad? I use a Mac Pro and a Netgear N300 Wireless N Router. The N300 sees the Airport fine and I can play music to the Airport from iTunes, but none of the other advertised features appear obvious.
All of my other Apple products sync to the N300 Router without issue and apart from some minor setting up to get it working with Apple TV, the N300 presents no compatibilty issues whatsoever.
When I purchased the Airport Express, I truly beleived that the Airport Utility Software, would allow me to choose whether I want to use it for Audio or USB or Repeating / Extending my network, by simply selecting the mode I required, when I required it. After all, isn't that the beauty of Mac computers?
Alas, there is no such drop down menu or button I can press in Airport Utilty to make such a straight forward selection. Instead, from what I can see so far in Airport Utility and various forums, there is a very long and painful process that must be carried out to use the Airport to extend my WIFI network.
I refuse to believe that it can be this hard and assume that that there is some really obvious setting I can change to make this work. It certainly wouldn't surprise me if Apple left this out of the manual, as Apple are legendary for not telling you how connect to 3rd party products, as I found with Apple TV.
As I said, I have read a million threads on this topic and all I have found so far are wanna be geeks, getting lost up there own a**es with lots of technical rubbish that has nothing to do with the problem.
If there is anyone there who actually knows what they are talking about and can explain this without Pythageros Theorem, I would be most grateful.

The AirPort Express can "Join" virtually any wireless network to provide AirTunes and remote printing capability.
But, the "Extend a wireless network" function of the Express appears to be a proprietary feature that will only work with other Apple wireless routers.
As far as we know, this feature is not compatible with routers from any other manufacturers, so there is virtually no chance that it will work with the Netgear N300 router.
I refuse to believe that it can be this hard and assume that that there is some really obvious setting I can change to make this work. It certainly wouldn't surprise me if Apple left this out of the manual,
Well, you can try either the guided setup or the Manual Setup method to configure the Express to "Extend a wireless network", but you are going to get an error message that the "network cannot be extended".
If you have the time and wish to prove this to yourself.....
Open AirPort Utility - Click Manual Setup
Click the Base Station tab below the icons to name the Express, setup a device password and adjust Time Zone settings
Click the Wireless tab and adjust as follows:
Wireless Mode = Extend a wireless network
Wireless Network Name = The name of the Netgear network that you wish to extend
Enter a check mark next to "Allow wireless clients" if not already checked
Wireless Security = Wireless security setting of the Netgear network
Wireless Password = Enter the password of the Netgear network
Confirm Password
Click Update and wait for the error message

Set up a Motion Path to repeat?

Hi,
I have a project where I would like to have a motion path repeat until a specific point in time. Is there a way to specify this rather than copying and pasting until I want it to end? Thank you,
-Zack

Yes, you need to set the "After Last Keyframe" option in the keyframe editor.
-View the parameter(s) you want to repeat in the Keyframe Editor.
-In the Keyframe editor, to the right of the Keyframes is the animation menu, select After Last Keyframe and then set to repeat.
for more details, look here at the section titled "Parts of the Keyframe Editor"
http://help.apple.com/motion/mac/5.0/en/motion/usermanual/#chapter=12%26section= 10

Set up scan, can it be repeated?

During set up, the printer printed a page with the rows and columns of coloured lines. I was then asked to place it on the glass and scan it. After I took it out, I realised I had put it in the wrong way round (still print side face down.) I am concerned that would effect the print quality of the machine. I tried to re-do it but the back button wouldn't let me go back. Is it possible to re-scan that page? Do I need to? and if so, how do I do that?
This question was solved.
View Solution.

Hi @waverider13
Thanks for reaching out to the HP Forums, and welcome! I'd like to help.
If the printer passed the alignment test, there is no need to perform it again. If you are unsure, or if you would feel better performing the alignment a second time you may use the steps below (you will need to print a fresh alignment page);
On the printer control panel, press the Down Arrow () to select Tools, and then press OK.
Press the Down Arrow to select Align Printer, and then press OK. The printer prints a test page, and then prompts you to scan the page.
Lift the scanner lid, and then place the page on the glass according to the instructions on the alignment page.
Close the scanner lid, and then press OK.
- Source
I hope this resolves your inquiry.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Need help setting up WRT54G as wireless bridge/repeater

I currently use a WRT54GS as a wireless router. It is located downstairs and can't be moved. I have a few devices upstairs that can't connect to the router because of a weak signal. I can not run a cable upstairs and have a second WRT54G router that I'd like to use as a wireless access point. Can I configure it to work as a wireless bridge or repeater? If so, will the 4 LAN ports work in addition to the wireless ones?

No. You cannot connect the two routers wirelessly, at least not with Linksys firmware. Perhaps there is third party firmware that will convert the WRT54G to a wireless bridge, but this will void your Linksys warranty.
Another option is to add high gain antennas, such as the Linksys HGA7T, to your WRT54GS. Also, try to align the router and wireless adapter antennas so that they are parallel to each other, but perpendicular to the line between them - this should maximize your signal.

I had set my passcode by pressing 1 repeatedly till it filled the passcode box. I dont know how many times I have pressed 1. Can someone tell me the character length of the text box of the Passcode

Hi,
My son foolishly pressed a single digit till it just filled the text box of the passcode. Now i dont know how many times he has pressed it. If I can know the charcter length, or how many digits can just fill the text box of passcode, I can unlock my ipad2. If anyone reading this has ipad2, he can do the same thing and count how many digits will just fill the text box. I will really appreciate the help.
Thanks

You can put the iPad into Recovery mode and Restore it. See this link and note the sentence commencing, 'If you restore from a different computer.... ' down near the bottom of the page.
http://support.apple.com/kb/HT1808

Setting background image for repeating frame in .pdf report

Is it possible to set a background image for a repeating frame, and more specifically for a repeating frame rendered in .pdf?
I do not see any standard property in the navigator for images of any sort and the documentation touches only on setting background images for graphs, which is not the intent in my case. I -did- add an HTML table property background="myimage.jpg" but the report is ultimately generated in .pdf format and I was not surprised to see that the image was not rendered.
Does anyone know if setting a background image as described is even possible, and if so, how? A second but less optimum solution would be setting the image as the background for all report pages, again in .pdf.
Many thanks.

Hi Raj,
Yes you can have an image in the background. Thats possible if you are using XML forms as an iview or ivew dev in WebDynpro...
Also check this [link|regarding background color change in iview]
Regards,
Piyush
Reward points if this helps!!!

When using iCloud calendar I want to set a "custom" repeat interval.

Trying to set a calendar event with a repeat that doesn't show in the default drop down box on either iPad or iPhone. Can see a "custom" possibility when using my pc. Is there a way of adding the "custom" selection to either of the two devices.

Ganesh,
In query restriction/filtering on keyfigure not possible. Only on characteristic.
So its better to populate a indicator(char) at extraction level and use if for filter.
Hope it Helps
Srini

Does ne1 now the html code to set a background image=non repeat, center for dreamweaver or where to find it?

Im trying to set up an about me page like that of myspace.com
i know that in myspace you can set the background image center non
repeat can this be done as will with dreamweaver?

Hello,
Yes, it can be done using CSS.
You can place this in your code, right before </head>.
Just substitute your image for mypicture.jpg.
<style type="text/css">

</style>
-OR-
You can also do this using DW's dialog boxes (like a wizard).
If you have DW8 or CS3...or MX2004 if memory serves, you can
right click on
your page in design view.
Select CSS Styles > New
A CSS Rule dialog box opens.
Select tag, then in the tag box, type body.
You can select whether you want to add the CSS to this page
(like the code
above) or to a stylesheet linked to this page. If you are
going to use CSS
on multiple pages, it's a good idea to use a stylesheet. Then
you can make
changes in one place that affects all the pages linked to
that stylesheet.
When you click OK, a new box will open where you can define
your CSS.
Select "background" from the sidebar, and the fill in areas
are pretty self
explanatory.
I hope that helps.
Take care,
Tim
"Jimtheman2000" <[email protected]> wrote in
message
news:fo84t1$je9$[email protected]..
> Im trying to set up an about me page like that of
myspace.com i know that
> in myspace you can set the background image center non
repeat can this be
> done as will with dreamweaver?

Window to set repeat value.

Hello Applescripters. I'm looking for a way to have an apple script run as an application, and in doing so when run it will 1st show a small window that asks for a repeat value. Then with this value runs the script x number of times as told. My repeat value I have is as such…
set frontmost to true
end tell
repeat 1 times
keystroke (ASCII character 30) --go up…
1: How can I script a window to display when the applescript application is clicked?
2: How can I script the window to take the number entered and make it the number of times the script is to repeat itself?
Any help is greatly appreciated,
Maximilian

Hello kel,
That was an impressive script thank you. I tested it out as is with the beeps and it seemed to work exactly like I wanted. However when I inserted…
display dialog "Enter a digit:" default answer ""
set t to text returned of result
set i to t as integer
repeat i times
[My script]
end repeat
My script into the script it just gave me beeps as it ran through. But I figured out that my script needed the front most Finder widow to be active. So I threw tell application "Finder"
activate
select Finder window 1
end tell
just before
[My script] and it worked perfectly!
Thanks a lot for that,
Maximilian

A better way to auto set category to bank transactions

I have a table with bank transactions, the third cell have "Memo", some kind of description, I want to classify the transaction based on words found in the "Memo" based in another table with first column with classification and the second column with words (can be more than one word) to find.
Example:
Table Transaction:
Value
Balance
Memo
Category
-100,00
1900,00
Company Phone - electronic bill
Communication
-200,00
1700,00
School payment
Education
1000,00
2700,00
Deposit trough machine
-20,00
2680,00
Bob's Diner
Food
-40,00
2640,00
Star Gas Station
Fuel
Table Category:
Category
Key
Communication
Phone, Cell
Education
School
Fuel
Gas, Ethanol
Food
Diner, Restaurant
So far I found 3 possible solutions but I'm looking for a elegant and easy way to do it, it need be easy to manage and add words as criterions.
Found Solutions:
1 - nested "IF" (Complicated to manager and to add new keys for new categories)
2 - Add columns to the first table, one column for each key to test, then use "Lookup" to get Category in the column header (Not elegant)
3 - Trough AppleScript (very slow).
I make a research to find a way to make some like a "Loop" or a "Repeat until" with only Numbers formulas but I don't found nothing.
Any help will be appreciated.
Thanks.
Ps: this is my AppleScript (my real table is a little different than that in this message, my table have a subcategory too).
on know_category from array to memo
          set found to {"?", "?"}
          repeat with description in array
                    repeat with |key| in item 3 of description
                              if |key| is in memo then
                                        set found to description
                                        exit repeat
                              end if
                    end repeat
                    if not found is {"?", "?"} then
                              exit repeat
                    end if
          end repeat
          return found
end know_category
on categories_as_array from table
          set |result| to {}
          tell application "Numbers"
                    repeat with |row| in rows of |table|
                              set values to value of cells of |row|
                              set AppleScript's text item delimiters to ", "
                              set Category to first item of values
                              set subcategory to second item of values
                              set keys to text items of (third item of values)
                              set AppleScript's text item delimiters to " "
                              set end of |result| to {Category, subcategory, keys}
                    end repeat
          end tell
          return |result|
end categories_as_array
tell application "Numbers"
          set categories to categories_as_array of me from table "Category" of sheet "Config" of first document
          set names to {}
          repeat with |sheet| in sheets of first document
                    set end of names to name of |sheet|
          end repeat
          set |name| to {choose from list names} as text
          repeat with |row| in rows of table "Transactions" of sheet |name| of first document
                    if not (value of item 7 of cells of |row|) is "Category" then
                              set memo to value of item 5 of cells of |row|
                              set found to know_category of me from categories to memo
                              set value of item 7 of cells of |row| to first item of found
                              set value of item 8 of cells of |row| to second item of found
                    end if
          end repeat
end tell

I apologizes but your handler categories_as_array seems to be wrong.
When I run the script it fails because it doesn't find a third item in values
I edited it this way :
on categories_as_array from table
          set |result| to {}
          tell application "Numbers"
                    repeat with |row| in rows of |table|
                              set values to value of cells of |row|
                              set AppleScript's text item delimiters to ", "
                              set Category to first item of values
                              set subcategory to second item of values
                              try
                                        set keys to text items of (third item of values)
                              on error
                                        set keys to ""
                              end try
                              set AppleScript's text item delimiters to " "
                              set end of |result| to {Category, subcategory, keys}
                    end repeat
          end tell
          return |result|
end categories_as_array
but the returned list which is :
{{"Category", "Key", ""}, {"Communication", "Phone, Cell", ""}, {"Education", "School", ""}, {"Fuel", "Gas, Ethanol", ""}, {"Food", "Diner, Restaurant", ""}}
is not the expected one.
My proposal would be :
on categories_as_array from table
          set |result| to {}
          tell application "Numbers"
                    repeat with |row| in rows of |table|
                              set {Category, values} to value of cells of |row|
                              set AppleScript's text item delimiters to ", "
                              set subcategory to first text item of values
                              try
                                        set keys to text items 2 thru -1 of values
                              on error
                                        set keys to {}
                              end try
                              set AppleScript's text item delimiters to " "
                              set end of |result| to {Category, subcategory, keys}
                    end repeat
          end tell
          return |result|
end categories_as_array
which returns :
{{"Category", "Key", {}}, {"Communication", "Phone", {"Cell"}}, {"Education", "School", {}}, {"Fuel", "Gas", {"Ethanol"}}, {"Food", "Diner", {"Restaurant"}}, {"fake", "sub1", {"key1", "key2", "key3"}}}
As you see, for tests I added a row to your table.
It contains :
fake
sub1, key1, key2, key3
Yvan KOENIG (VALLAURIS, France) mercredi 27 avril 2011 11:38:31

Can anyone help me write a script that would click "get info" and then "enter" on each movie in my itunes library? I am asking because my itunes 11 repeatedly loses the artwork to my movies in my itunes library.

Can anyone help me write a script that would click "get info" and then "enter" on each movie in my itunes library? I am asking because my itunes 11 repeatedly loses the artwork to my movies in my itunes library. I can restore the artwork (and make my apple tv see the movie exists as well) by going into the movie library and clicking on each movie by hand, slecting get info, and then selecting enter. Now doing this 10 times in 20 days was fun and all BUT I would really like to automate the process so everytime itunes screws it up I can fix it easier.
I saw this example of an itunes script that restores artwork for music
tell application "iTunes" set theSelection to selection repeat with i from 1 to count of theSelection tell (item i of theSelection) set artworkCount to count of artwork repeat artworkCount times set theArtwork to data of artwork 1 delete artwork 1 set data of artwork artworkCount to theArtwork end repeat end tell end repeat end tell
but I need to tweak this to fit my needs for simply clicking the "get info" button and "enter" in the movie library rather than all the stuff this guy has listed. Any ideas or help on writing this? Thanks.

Try assigning Queen as the Album Artist on the compilations in iTunes on your computer.

How can i wirelessely repeat the signal of a WAP4410n when using multiple SSIDS?

Hey.
I am currently setting up a WIFI-Network for a restaurant using the WAP4410n as Access Point with two SSIDs.
One SSID is for Guests and the other one is secured and for staff.
This second SSID should be repeated to properly supply the offices.
But every time i set the MAC of the allowed repeater the second SSID turns to disabled.

Read about signature separator.
http://kb.mozillazine.org/Signatures_%28Thunderbird%29

I can't build an xsd for a flat file (txt) to handle repeating records

Hi - have looked at many posts around flat file schema and they don't seem to address my question.
I have a flat file that is \n delimited
the pattern of the data is simple:
record1 - 90 characters
record2 - 20 characters
record3 - n 248 characters - each of these records is parsed into children by the positional method
record n+1 10 characters
record n+2 20 characters
so I used the flat file schema generator to generate the schema and built a map mapping the flat file schema to another xml schema. The schema looks ok - record1, record2, record n+1, record n+2 are child elements of the root. the repeating record
section is showing up as a node with the parsed children.
The transform is only mapping the children of the repeating records. When I test the map only the first repeating record gets parsed. No repeating happens (the actual flat file has 400+ repeating records). When I run the map in debug mode, the input
xml shows that record1 is read in correctly, record2 is read in correctly, record3 is read in and parsed and record4 is treated like record n+1 and record5 is treated like record n+2 and the map thinks it's all finished.
the section of the repeat part of the schema is and you can see that I set the minOccurs=1 and maxOccurs=unbounded for the node (INVOICE) and the complexType but this is not an affective syntax. I have looked at how the EDI X12 schema look and how they handle
looping and it is a lot different than what the Flat File schema wizard is doing. Is there a good set of rules published that would guide me though this? otherwise I will basically have to read in the lines from the file and parse them out with functoids -
seems so inelegant. Thanks in advance.
<xs:element minOccurs="1" maxOccurs="unbounded" name="INVOICE">
          <xs:annotation>
            <xs:appinfo>
              <b:recordInfo structure="positional" sequence_number="3" preserve_delimiter_for_empty_data="true" suppress_trailing_delimiters="false"
/>
            </xs:appinfo>
          </xs:annotation>
          <xs:complexType>
            <xs:sequence minOccurs="1" maxOccurs="unbounded">
              <xs:annotation>
                <xs:appinfo>
                  <groupInfo sequence_number="0" xmlns="http://schemas.microsoft.com/BizTalk/2003"
/>
                </xs:appinfo>
              </xs:annotation>
              <xs:element name="SegmentType" type="xs:string">
                <xs:annotation>
                  <xs:appinfo>
                    <b:fieldInfo justification="left" pos_offset="0" pos_length="2" sequence_number="1" />
                  </xs:appinfo>
                </xs:annotation>
              </xs:element>....... more children elements
Harold Rosenkrans

Thanks for responding
I gave up trying to parse the repeating record into fields. Instead I just loop through the repeating record section with an <xs:for-each> block in the xsl and use functoids to grab the fields.
So that works for having the two, shorter header records (structure is positional) before the section of repeating records. Now I just have to figure out how to get the schema to handle the two, shorter trailer (or footer, whatever you prefer) records after
the section of repeating records
the error I get in VS when I test the map is [BTW I changed the element names in the schema which is why you don't see INVOICE in the error]
When I declare the last element as being positional with a character length of 10 I get the error:
Error 18 Native Parsing Error: Unexpected end of stream while looking for:
'\r\n'
The current definition being parsed is SAPARData. The stream offset where the error occured is 1359. The line number where the error occured is 9. The column where the error occured is 0.
so the first record is 77 char in length and the second is 16 char and then the repeating records (5 in the file) are 248 char and the last record is 10 char
so an offset of 1359 puts it beyond the last record by 16 characters - so the stream reader is looking for the next repeating record.
if I try to declare the last element as delimited I get the error:
Error 14 Native Parsing Error: Unexpected data found while looking for:
'\r\n'
The current definition being parsed is SAPARData. The stream offset where the error occured is 597. The line number where the error occured is 5. The column where the error occured is 0.
so the first record is 77 char in length and the second is 16 char and then the repeating records are 248 char.
a stream offset of 597 puts me 8 characters into the third repeating record - at this point I have only declared one trailer record in the schema, 10 characters long.
Why is stream reader stopping at such a weird spot?
The bottom line is I still haven't discovered the correct schema to handle the trailer records. even if I set the maxOccurs="4" (for the repeat record declaration) it still gets the first error. How does it find an unexpected end of stream looking
for \r\n when the maxOccurs for the repeat record declaration should have the stream pointer in the 5th repeat record.
I unfortunately don't have any options concerning the file structure.
I have read a lot of posts concerning the trailer issue. I have seen a couple that looked interesting. I guess I'll just have to give them a try. The other option is to create a custom pipeline that will only take file lines of 248 characters.
That's just disgusting !
Harold Rosenkrans

Setting up a WAP4400n as a repeater

Similar Messages

Maybe you are looking for