Setting up inspection point in a scenario require more than one inspection

Hi all,
Maybe I am still not very clear on the PP-QM conceptu2026 hope you can see my problem on the following questionu2026..
According to SAP in the QM-production environment, we key in ONE inspection point in the task list header level (i.e. either the master recipe, routing, or rate of routing).
Based on the following business scenario which is going to use inspection point for the inspection:
u2022     Time-based intervals (for example, an inspection point every hour or for each work shift)
u2022     Quantity-based intervals (for example, an inspection point for each container)
u2022     Freely-defined intervals (for example, an inspection point each time a tool change occurs)
Since each of the above scenarios require more than one inspection points to be created and to be assigned to the task list header.
Thus, how to accomplish multiple inspection point assignment when the task-list header only allow me to assign one inspection point at a time?
Thanks
YY

Hi guys,
Thanks. However, in the SAP help portal it does said the system allows several inspection points to be assigned to an inspection operation whether it is in routing or recipe.
Therefore, does it means I can assign more than one inspection points in the operation detail level for either recipe or routing if I will to click the u201CNo relationu201D radio button in the u201CQuality Management: Inspection Pointu201D section. (i.e. is this is the right place to allows this assignment)?
For example, on the change master recipe screen at the Operation tab, I highlight one line item (i.e. one operation line item and zoom into this operation line item, I donu2019t see any field box that allow me to assign several inspection points to an operation? Instead, on the u201CQuality Management: Inspection Pointu201D section, there are the following fields appear:
- Insp.pointCompletion dropdown box
- 4 radio buttons on the inspection interval (ie. Time-related, Qty-related, No-relation) and its subseq time and quantity value input box.
- Quan.pt. lot checkbox
- Last Part Lot Assgmt checkbox
Thus, where is the section in the operation overview screen at Master Recipe or Routing level that I can assign several inspection points?
Thanks
YY

Similar Messages

T code for materials have more than one inspection plan!!

Dear Expert,
what T-Code can I use to identify which materials have more than one inspection plan applied?
Thanks in advance for your help!!!
Have a nice day!!!

Hi Sharan,
As Ashok has guided you is perfect way to get the list.
You further can do is in QP03 press the F4 help for the field "Group" and then set the search option as "Search Using Material".
The same list you will get from MAPL.
It will give you the material assignment to the task list group counter combination whether it will be single assignment or multiple it will give you the list. Then you should use the short/filter commands eithere on SAP screen or after downloading it in excel.
Unfortunately there is no such STD list available that can give you only those who are having multiple assignment.
Regards,
Shyamal

Can I set up a Contribute administrator control panel on more than one computer?

I am ust getting started with Contribute. I generally create/edit websites & content on my company's shared drive at work, and then upload to our websever. I successfully set up the administrator role on my computer at home. How can I set up the same control panel on my laptop at home without un-doing all that I have created at work?

Thanks! I thought this would probably be the case, but since iTunes allows me to authorise more than one machine, I thought that it was just possible that QuickTime might do the same. Back to the drawing board ...
Cheers,
Andrew.

Set parameter id for select-options to fill more than one value

FROM MY CUSTOM PROGRAM I AM CALLING A TRANSACTION CODE. IN MY REPORT I WANT TO SELECT MORE THAN ONE RECORD AND TO CALL THE TRANSACTION BY PASSING THE SELECTED VALUES TO THE SELECT-OPTIONS OF THE TRANSACTION.
IF IT IS A PARAMETER I CAN WRITE SET PARAMETER STATEMENT FOR ONE VALUE AND EASILY CALL THE TRANSACTION. BUT I WANT TO FILL THE SELECT-OPTIONS OF THE TCODE.
CAN ANYBODY PLEASE PROVIDE ME THE LOGIC HOW TO FILL THE SELECT-OPTIONS FROM MY REPORT FOR CALLING THE TRANSACTION.
REGARDS,
VASU.

Hi..
Instead of calling the Transaction
Call the Report directly using:
(First declare the Ranges)
ranges : R_matnr for mara-matnr.
(Fill the values into Ranges Table and call the report )
SUBMIT <REPORT>
With s_matnr in R_matnr.
<b>Reward if helpful.</b>

Can you point remote telemetry data to more than one computer running Scout?

If more that one person on a team wants to profile something, it seems there are 3 choices,
run Scout on the same test machine (this is not always possible or desirable)
remote profile using a single, designated computer running Scout
manually edit "TelemetryAddress" to point to the person's computer wanting to do a test
Is it possible to point the telelemtry to more than one remote machine?
For example can the flag entry in teleletry.cfg have multipe remote IP's? Something like
TelemetryAddress=192.168.1.20:7934, 192.168.1.55:7934
It appears not. What's your say?
My current setup:
I have a low end test computer on which I run the Flash content (i.e. Scout is not installed/doesn't run on this computer). Following the instructions given under "Remote profiling for desktop content", the ".telemetry.cfg" file points all telemetry data to a remote computer running Scout.

I realize this is an old thread, but I couldn't help but consider this interesting question.
You could, on a linux or OS X box -- as along as they have the netcat and tee utilities -- listen on the telemetry port and forward to multiple recipients. The command to listen to port 7934 and relay to both two other machines, 10.0.1.100:7934 and 10.0.1.101:7934, is:
nc -l 0.0.0.0 7934 | tee >(nc 10.0.1.100 7934) >(nc 10.0.1.101 7934) > /dev/null
You can add as many recipients as you like with more >(nc ipaddress 7934) clauses in the middle.
In this case, point your .telemetry.cfg at the machine running this script, and it will forward the telemetry data to the IP addresses you specify. If they're all running Scout, they should all see the data.
For kicks, here's a couple other useful commands:
Capture telemetry data to a file: nc -l 0.0.0.0 7934 > data.flm
Push saved data.flm file to Scout on localhost port 7934: nc localhost 7934 < data.flm
Just one more reason Linux rules. Hope this helps someone!
Best,
-Jeff

Adobe Edge Inspect is not letting me connect more than one device

It saying that I need to Login or Upgrade to use the Full Version when my adobe suit is not the free trial and my account is pay through September of this year. And when I try to connect anyways, the pop up window is saying "Use of multiple devices is an Edge Inspect full version feature. Upgrade now to connect multiple devices concurrently". Let me know why this might be happening. My Chrome Version is 35.0.1916.153
Thanks!
Jen.

Edge Inspect
If you will start at the Forums Index https://forums.adobe.com/welcome
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

How to set the Certifcate to use for SSL when more than one available?

I apologise for bad wording of question.
We have a 11g Directory Server and when we created the directory instance it generated a self-signed certificate. very nice.
We have recently requested and installed a CA signed certifcate, so we now have TWO certificates in the directory certificate store. Default Certificate and the new Server-Cert (the CA signed one)
LDAP clients STILL seem to be presented with the self-sgned certificate though.
Simple question... how do I make my Server-Cert the 'default' certificate presented to LDAP clients ???
I would rather not delete the self-signed cert if possible.
I cant find any documented method to achieve this.

# Listing Certificate
$ /certutil -L -d <path>/slapd-abc/alias -P slapd-
# Add Trust by adding CT
$ certutil -M -n "GeoTrust DV SSL CA" -t CT,, -d <path>/slapd-abc/alias -P slapd-
# Verify the setup.
$ certutil -L -d <path>/slapd-abc/alias -P slapd-
( You should see the CT beside the relevant cerficate, making it default for SSL communication )
GeoTrust DV SSL CA CT,,
Link : http://docs.oracle.com/cd/E19656-01/821-1504/6nmg10b6g/index.html ( Look around for different steps for configuring SSL )
JPrince

Says disc requires more than one cd to complete?

I'm burning a cd from itunes, and it says it will need two discs, but I'm burning 110 mb, and the disc can hold 700mb? I want it on one cd, so what should I do?

Can you go to the the iTunes Edit menu > Preferences > Advanced tab > Burning sub-tab and check the Disc Format selection.
If it's an Audio CD, it's the length of time - not the size of the files - that determines how much music can be burned to a disc: approximately 70 minutes.

Is there a way of setting up one more than one export preset to a funcion key?

Hi
is there a way of setting up Lightroom to export images in using more than one export preset at one time? When I have edited my photos I very often want to create a full res JPEG to upload to Zenfolio with no watermark, a medium res JPEG to go to Flickr and a 1500px image with a watermark for Facebook (I normally upload these last). I'm hoping Lightroom would also have a an option to set Function keys to trigger export presets for example.
I'd like to be able to stack export presets to help with my workflow.
Thanks
Jon

robcole.com - ExportManager
does what you want, as long as you don't need post-process actions in your export preset(s).
plugin | free | I wrote it..

Auto creation of time based inspection points against in process required

Hi
We want system to create/generate inspection points automatically when process order is released and inspection lot is created. Currently we have to create inspection point manually using either QE71 or QE11. Previously when scheduling was active in PP, inspection points had been creating automatically for the duration of process order. But now PP scheduling is not required and as a results inspection points are not being created automatically.
Please assist.
regards
Chris

SAP provides a FM, (QAPP_CUST_IP_CREATE), to be used as a template to create your own FM for automatically creating inspection points. There is documentation in the FM to explain it. You then assign this FM in configuration where you define the inspeciton point identifiers.
FF

Can we set "IN PROCESS" Status to more than one User

Hi,
As per my client current scenario every work item will be sent to 3 useru2019s (One is the supervisor of the other two users). If any one of the user executes the work item it will automatically call a Ztransaction and displays the screen. When any one of the user executes the workitem, then the workitems will dissappears from rest of the users inboxes; Setting "IN PROCESS" status for the person who executed the workitem. The workitem will be in "IN PROCESS" Status untill the User Press "SAVE" button in the transaction.
If the person whose executed the workitem (IN PROCESS) status, has gone on unplanned leave; then the supervisor wants to forward the workitem of the current user to other user. How can he forward?
Is there any option to set "In Process" status to more than one User? [Supervisor and Person who executed the workitem]
Please provide me any advice to the above requirement.
Thanks in advance,
Ajay Kumar

Can you ask your workflow administrator to forward the workitem to the user you want to be sent it to.
I tried a small case wherein I had forwarded a workitem to myself and another user.
As I executed it , it went into status IN process and at the same time it got removed from other users inbox .
Now I went to T Code SWI1 and forwarded iut to another user say USABC.
As a result the workitem again went into status "Ready" and into the inbox of the user ABC.
So , you can try this in your case with the help of your workflow administrator.
Another way is to create the other user as a substitue of the user who is currently executing the workitem.

Setting color codes for more than one photo at a time

Is there any way to set color codes for more than one photo at a time?

Hi John,
I will look at keywords. My issue is speed. Right now I am culling and editing an event shoot that spanned a week with 35 separate events and more than 5000 images. So I use the fastest most convenient method I can and it still takes a long time to have a completed and final shoot. On this shoot I will end up with a final set of around 1500 images. Right now I am finishing processing a show that will hang in the Deutsches Amerikanish Zentrum in Stuttgart.
As I am sure you are aware by now, having seen enough of my inane questions that over the last two years or since Lightroom version 1.xx if I could not figure out how to do something I skipped it. So many things in Lightroom are buried and unless you have a mind like a steel trap (and think that some of you guys in the forum do) locating how to do something is not obvious.
For example, I only learned (in the last hour) that I could assign colors as a group of selections by using Shift + number. I found this in a side head in Martin Evenings Lightroom book. I still do not know how to find a way to display the color filter "selection" set in Library mode. Is there a way?
To top it off, Stuttgart Media University asked me if I would add a Lightroom module to my schedule this year. Now I have a compelling reason to learn all those missing pieces that I have created workarounds for. Hence the number of posts you have been seeing from me over the past few of weeks.
I tell my class that there are no such things as stupid questions, only questions. Now I am practicing what I have been preaching for the last gazillion years. Guys like you have been great.
My workflow is
1. I first separate all images by event. I do that at the time of import.
2. I do a fast pass rejecting all the obviously bad images
3. I do a second pass grouping the images by sub-group (speeches, people talking, performances, etc.) This is where I run out of selection methods and your key-wording could work but it would probably take too much time to establish a keyword set for a single event. Where I have more than five subgroups I set up different collection sets with one collection for each sub group. However I would like to keep a single event in one collection.
4. I then select the images to be used by color code.
5. Next I process the final images (crop develop etc) by collection.
6. Last I output the set according to client requirement.
If you have a better workflow, I am all ears.
By the way, what is your photo specialty and where are you located?
Jim

More than one outbound interface for the webservice scenario

Hi Experts,
Is it possible to have more than one outbound interface for the Webservice synchronous scenario? I have tried it , but I couldn't implement it.
I would like to have your suggestions.
Regards
Sara

Hey,
Creation of a wsdl file
/people/riyaz.sayyad/blog/2006/05/07/consuming-xi-web-services-using-web-dynpro-150-part-i
N:1 seemz he was refering to multimapping scenario.
<b>Cheers,
*RAJ*
*REWARD POINTS IF FOUND USEFULL*</b>

More than one step BC sets approval for PO's

Good day All.
I would like to know the bc set for more than one step of approvals for the Purchased Order. We know the without tha approval and one step approval for PO.
/SAPSRM/C_PO_600_000_SP04 Purchase Order Without Approval
/SAPSRM/C_PO_600_001_SP04 Purchase Order with One-Level Manager Approval
You speedy response would be appreciated.
Regards
Makoro Manyathela

Hi,
You can configure many approval steps based on your business requirements.
The BCSets /SAPSRM/C_PO_600_001_SP04 is just a sample configuration.
Please go to IMG.
SRM -> SRM Server -> Cross-Application basic Settings -> Business Workflow -> Process-Controlled Workflow -> Business Process Configuration -> Define Process Levels.
Regards,
Masa

In Share point 2013 how to add more than 2 group by in list

In Share point 2013 how to add more than 2 group by in list .

Hi,
According to your post, my understanding is that you wanted to group by on more than 2 columns in a List View in SharePoint 2013.
There is no out of the box way to achieve your scenario directly.
As a workaround, we can use the following method to achieve it.
First, we can insert Data View Web Parts in SharePoint Designer 2013.
It’s because the SharePoint Designer 2013 can’t support Design view, then the Data View Web Parts XSL cannot be visually manipulated.
You can refer to the following article to insert a Data View Web Part.
http://www.synergyonline.com/Blog/Lists/Posts/Post.aspx?ID=259
And then, you can use the following solution that can be used to
group by on more than 2 columns in a view
to implement it in SharePoint Designer 2013.
http://techtrainingnotes.blogspot.com/2011/01/sharepoint-group-by-on-more-than-2.html
http://chanakyajayabalan.wordpress.com/2010/03/15/group-by-for-more-than-two-columns-in-sharepoint-list/
Best Regards,
Linda Li
Linda Li
TechNet Community Support

Setting up inspection point in a scenario require more than one inspection

Similar Messages

Maybe you are looking for