Setting up SRM-MDM catalog 2.0 in PI 7.0

Hi guys,
Iu2019m configuring the scenario for SRM-MDM catalog 2.0 and in the IR when I open the configuration scenario SRM_MDM_Catalog I get the following error:
u201CSoftware component version with GUID 44345e20-149b-11da-ab19-eb7a0a114c15 does not existu201D
I went to a demo system and I found that this GUID belongs to the SWC SRM SERVER 6.0. So, it means this object SRM_MDM_Catalog  from SWC SRM-MDM catalog is referencing some object in the SWC SAP SRM SERVER 6.0.. However, we are not working with SRM 6.0 but with 5.5 releases.
I also went to service marketplace and I didnu2019t find the package for SWC SAP SRM SERVER 6.0.
Without this SWC I canu2019t skip this error!! Anyone has faced this issue before? How can I get the PI content for SAP SRM SERVER 6.0.?
Thanks in advance,
Ricardo.

I fixed by myself.
It seems the XI content "SAP SRM SERVER 6.00" is not yet available for customers, but a SAP friend sent me the content. Now the problem it's fixed.
Regards,
Ricardo.

Similar Messages

  • SRM-MDM catalog 3.0 - Installation Process

    Hi All,
    I'm in the process of installing SRM-MDM catalog 3.0 but I'm not sure about the correct installation process.
    The SRM-MDM catalog 3.0 installation guide indicates that the following instances are mandatory for SRM-MDM Catalog system:
    1- Java system with the central instance, the central services instance, the database instance
    2- MDM Server, and MDM Import Server
    We have covered the first point by installing an SRM 7.0 JAVA system. Regarding the second requirement, I have some doubts in the way it should be completed. What we did so far was to install the SRM-MDM catalog 3.0 from the MDM 7.1 installation master. So, we now have two MDM server instances: MDS and MDIS.
    I'm stuck now. I'm not sure on how to connect my SR-MDM system to the JAVA DB (created in step 1) to create a new MDM schema within it. This makes me wonder if I've followed the correct process. Could you please clarify and explain which steps should be performed to get my SRM-MDM system up and running? Actually my main concern is..Should I first install a MDM system as it's described in MDM IG, and after that perform the installation of the SRM-MDM catalog as I've already done in step 2?
    Hope being clear enough I'll wait for your suggestions.
    Thanks and regards

    Hi Diego.
    The Installation Note Number for SRM-MDM Catalog 3.0 is : 1177779. The recommended steps would be to follow how the Installation Guide recommends you to do so.
    But still your assumption is correct. MDM landscapes and Java landscapes are both different set of categories to be installed to make the Catalog scenario to be successfull.
    Step 1:  Make sure you have the back end database server(SQL/Oracle/???) is installed.
    Step 2:  Make sure all the MDM components(MDS, MDIS, etc) is installed.
    Step 3:  Make sure Java WebAS is installed correctly.
    Step 4:  Now deploy the Catalog SCA and MDM Connector deployed in the Java WebAS.
    Step 5: You can unarchive and load the repository.
    Step 6:  Try to launch the catalog using the URL provided to check and make sure if the connection is fine.
    Also what Masa has mentioned is the communication path how the whole process is achieved technically and that doesn't mean that it has to be in the same order which he has mentioned. The below sequence is just an path to describe how the communication is achieved technically.
    User -> Browser(Search UI deployed on AS Java) -> (Java API on AS Java) -> MDM Server -> MDM Repository -> DB
    Relating Masa's path with the above steps
    User ->
    Browser(Search UI deployed on AS Java) -> Step 3 and 4
    (Java API on AS Java) -> Step 3 and 4
    MDM Server -> Step 2
    MDM Repository -> Step5
    DB-> Step 1
    Hope this helps.
    Regards
    Bala
    Edited by: chandar_sap on Aug 30, 2010 6:16 PM

  • Multiple SRM Systems One SRM-MDM Catalog?

    Hi
    I'm currently upgrading our SRM 5.0 to SRM 7.01 with SRM-MDM Catalog 7.01.  Is it possible to use one SRM-MDM Catalog in our non-production environment and connect multiple SRM systems to it?
    For example our sandbox, development and QA SRM 7.01 systems would all connect to the same SRM-MDM Catalog 7.01.
    Thanks.
    Neil

    Hi,
    for non-production use and if it is just a catalog without custom coding running I see no problem in using one MDM server for multiple SRM systems (especially sharing one for sandboxes and dev). It is a setup I have seen multiple times and it worked always without problems.
    You should set up different repositories for each SRM system so that you don't interfere with each others data (i.e. suppliers or other lookups tied to SRM).
    You have to keep in mind that you have to upgrade all systems together. But you can always use separate MDM servers during the upgrade process and then consolidate onto one server when the upgrade is done.
    If you are running custom coding with your MDM catalog I would recommend having a separate MDM system for the QA SRM in order to be closer to the production set-up when testing your custom solution.
    Regards,
    Martin

  • SRM MDM Catalog Multiple Imgae (field) display in UI

    Hi MDMers,
    I have configured the SRM-MDM Catalog and I had done Import data, mapping data, OCI, SRM call structure and UI settings. Everything works fine when we call the Catalog in SRM.
    My SRM -MDM Catalog needs certain custom fields which should hold some Button indicator for item classification (Red, Amber, and Green)
    Already we used MDMSRM_IMAGE field to have pictures of Item and mapped in Display view in UI manager.
    I tried one more custom field for the Image to hold this buttons (.gif file) but unfortunately it is not bringing the indictor images, just place holder is exist without indicator image.
    Could you please help me and give some work around solution to bring that Button Indicator in My Catalog view for each item.
    Please light up something on TEXT HTML, TEXT BLOCK, HYPERLINK and mime type
    Is it possible to have the .gif Image by using above functionality? If so please guide mates.
    Regards
    Edwin

    Hi Tam,
    I have tried to set up hyperlink for my images in SRM-MDM catalog.But no luck.
    1. My MIME Type is GIF.
    2. My url is
      http://fssomsdits01.forensic.gov.uk/eMerge/images
    The URL path contains my Images file like GREEN.GIF and RED.GIF
    Where I have to display the 2 images according to the catalog Item.
    As per forum discussion I tried the steps.
    I declared the MIME Type & Hyperlink type (rendered) in Look up table.
    I have mapped the fields in Catalog item table for MIME Type<hyper link> & URL<hyper Link> and Hyper Link.
    The data is just replicating in DATA manager, but not displaying in UI as image.
    Please can you help me to sort it out?
    Just explain me how to enable the Hyperlink field to line item.
    The steps to import thre Mime type/hyperlinku2026look up table and Qualified table.
    Regards
    Edwin

  • How to use the Masks in SRM-MDM catalog?

    Hi Expert,
    We are at SRM-MDM catalog 3.0.
    There have  two types of SRM contracts were transferd to one MDM catalog repository, and we config two different number range for these contract types. We will creat two web services in SRM IMG, only the same number ramge of the contracts could diaplay in one web service.
    As this requirement, may be the MDM function Masks could be a solution I think. But when I try to separate the contracts with two masks in MDM Data Manager, I have no idea that how could I set the key filter with the contract number fields.
    Could every expert tell me how could i set the Masks as this situation?

    Hi
    Have you assigned the masks created in data manager to some role in Console(Console-Roles TableRole1-Table and fields tabMask--add Mask 1 say)
    Once the mask is assigned to the role then only the role can see records pertaining  to that mask else it can see all the records in the repository.
    Regards
    Nisha

  • MDM Server Password Parameter in SRM Web Service for SRM MDM Catalog 2.0

    Hi Experts,
    We have password set on our MDM server. I am little confused about how to define MDM server password parameter in external Web service Call structure in SRM System for SRM MDM Catalog 2.0.
    Will Catalog webservice work, if we don;t define password for MDM server in webservice??if No, then please let me know how to define MDM server password in SRM websevice.
    Any help will be highly appreciated.
    Thanks,
    Shiv

    Hi Shiv,
       The MDM Server password is needed when you are changing Webdynpro UI Configuration.
      For catalogs, all you need is the repository userid/password parameters in the call structutre.
    SG

  • SRM MDM Catalog -Service Item

    Hi guys,
    We got a standard SRM MDM catalog implementation with OCI configuration handling all the item mapping.
    I run into issues when I flag an item as a "Service Item" in MDM by using the default provided flag MDMSRM_SERVICE_ITEM.
    This flag, when set to the true value of X, passes an item to EBP as a Service item as it should.
    However, once this flag is set for an item and the corresponding OCI mapping is done, all other items (i.e. items that have the flag with a false value) in the MDM repository get transferred to EBP as Service items as well.
    So, in other words, once the the MDMSRM_SERVICE_ITEM is mapped in OCI, it flags all MDM items as Service items irrespective of the flag value.
    Any help is deeply appreciated.
    Thanks folks.

    Hi Anshuman,
    We had a same issue. Just you need to set the other value="FALSE".
    Open the MDM Console, select the SRM-MDM repository, Select the main table and navigate to the field Service Item. You will find this field is of type Boolean with True value = "X" and False value = " ". Set the False value = "FALSE" and Default value = FALSE.
    Now check whether the items present in Data Manager has FALSE for service item field by default and then run the scenario it should work fine.
    Kindly update us...
    Regards,
    Jitesh Talreja

  • SRM -MDM Catalog Implementation

    Hi All,
                I am currently working on SRM-MDM catalog implementation and would like to clear a few queries regarding the same:
    1. What are the different possible ways to transfer data from SRM to MDM?
    2. In the configuration guide it is mentioned that if you want to send Contract, InfoRecords, Product Data then we have to use XI. Communication between SRM and XI will be using XI protocol. It means we have to create outbound proxy for triggering data from SRM to XI.
    Is this correct please confirm. If yes do we have a standard proxy report to do the same.
    3.  In the Functional Documentation Guide for SRM-MDM catalog it is mentioned that to send contract data from SRM use transaction <b>SRMMDM_CTR_TRANSFER</b>. but though it shows the contract data, it is not able to send data to XI. Is some setting required for sending data to XI?
    4. In Functional Documentation Guide for SRM-MDM catalog it is mentioned that to upload Supplier Data from SRM system to SRM MDM Catalog repository use Report <b>ROS_SUPPLIER_SEND_TO_CATALOG</b>.  But while executing this report I m getting exception  "Function module "<b>BUPA_MWX_BDOC_BPS_FILL_CENTRAL</b>" not found.".
    How do I solve this?
    Thanks in Advance
    Shiv
    Note: Points will be awarded to helpful answers.

    Hi Shiv,
    you can use the import Manger of MDM to upload XML, CSV XSL data files
    The connection from SRM to SRM-MDM is done via OCI 4.0.
    If you want to replicate data from your backend R/3 system you have to use XI.
    2. Please Refer to the installation guide of SRM-MDM there the connection between Backends and XI is expalained in detail.
    3-4 . Have you depoyed every file of the istallation there is also a part to be deployed in SRM?
    Best regads Alex

  • SRM-MDM Catalog publication in portal

    Hi experts,
    Iu2019m facing some difficulties concerning MDM / portal integration. We are implementing SRM-MDM catalog scenario and Iu2019ve already created a catalog in MDM Data Manager. Iu2019ve also set the parameters for the web service definition in SRM system, and assigned the Catalog ID in ppoma_bbp.
    However, Iu2019m still not able to access my catalog information in portal. When I try to access my catalog it is necessary to introduce again the logon details and an error message u201CLogon failedu201D is displayed, which is not normal right?
    In addition, if I introduce my logon details nothing happens but the error message is changed for a warning message u201CLogon failedu201D. Consequently I cannot access my catalog in portal.
    Can someone help me? What might being wrong with my catalog publication?
    Many Thanks!
    Best regards,
    Andreia Nascimento

    Hi,
    Yes, You can define any user which has "Catalog User" Role defined in MDM in SRM Web Service". and this is not required to have same user in SRM system. You can assign this web service ID as attribute to any SRM user.
    Did you get "Connection Successful Message"?? I couldn't see that in your Trace.. Once you test Connection then you should get message in Green "Connection test was successful".
    Also, Check the following Things and revert with the result:
    1. Is your repository Loaded?
    2. Try to Console through the User which you have defined in Web Service. This will confirm whether User credentials are correct or not.
    Also, let us know which version of SRM you are working with and what is version of your SRM-MDM Catalog.
    Regards,
    Shiv
    Also Check this document (Page no 32 ) and make sure if you have defined other parameters correctly in the web service definition.
    https://websmp103.sap-ag.de/~sapdownload/011000358700000134212010E/srm_mdm_integration.pdf
    Regards,
    Shiv
    Edited by: Shiv Prashant Dixit on Mar 5, 2010 11:32 PM

  • SRM-MDM Catalog - Transfer Product masters

    Hi Guys,
    I am using SRM 5 and SRM-MDM 2.0. I have uploaded using MDMGX all the product groups, currencies, and UOMs successfully.
    Now I have set up XI and SRM for transferring Product masters, suppliers and contracts. When I run BBP_CCM_TRANSFER, I am getting confirmation with green light. However, I am not seeing any messages in SXMB_MONI. But when I send the suppliers, I could see messages in SXMB_MONI in SRM and Xi and both are with checkered flag (successful). But in MDM, I do not see any supplier entry. Where do I see?
    Also, why I can not see SXMB_MONI message for product master transfer.
    Any help is highly appreciated with loads of points.
    thanks,
    Surya

    Hi Masa,
    Thanks for your reply. I have configured Xi communication channel. I have put the FTP server entries and path to the ready folder in communucation channel as per the ftp server set up. But the file is not in Ready folder when I checked the ftp directory path. It didn't even show any entry in SXMB_MONI in SRM. Do I have to make an entry in "Define Backend Systems" in SRM for SRM-MDM catalog?
    Also, when I transferred the suppliers it is showing up in SRM and XI under SXMB_MONI as successful but was not there in MDM data manager. Do you know where I can find the supplier that I loaded through XI?
    Also, I would like to confirm that my FTP path in communication channel I have changed based on what we configured for our FTP server to the Ready folder and so is it OK or we have to leave it as it is. Is it possible to send me your commincation channel screen shot? I would really appreciate your help.
    I will give so many points.
    thanks,
    Venkata Nibhanupudi

  • Service hierarchy for SRM-MDM catalogi scenario

    Hello,
    We tried setting up the 'new' SRM-MDM service hierarchy catalogi. I've looked over some sdn threads already and read the SAP help http://help.sap.com/saphelp_srm70/helpdata/en/6b/7fb967f6cd4df0a5a9d5dec7e4aa72/frameset.htm. Both told me the service hierarchy should work in the SRM 'bidding/RFx' scenario. Since service hierarchy should work for RFx we continued trying setting it up but ran into the following problem:
    Up on opening our service hierarchy catalogi it returns the following message 'Table is empty' and does not show us any items(mss hierarchy is enabled in the SRM-MDM UI configuration for this catalogi). If we change thé UI setting to 'products' the items do show-up in a 'flat' manner (without hierarchy).
    - We've set up grouping in the SRM-MDM catalogi for these items
    - We've set up an entry in the MSS hierarchy lookup table and assigned this entry some of the catalogi items
    - We've not setup any MSS Hierarchy price
    - We've setup the item types, the outline item is of type 'MSS header' the subtypes are of type 'Free Text' and the MSS hierarchy entry is of type 'MSS header' aswell.
    - we've setup the hierarchy manually with testdata via the important manager (no pi/ix).
    Could anybody confirm service hierarchy works in the RFx scenario (mss hierarchy enabled)? Is there something we've missed or are forgetting? Any other pointters are greatly appreciated.
    Kind regards,
    Tim

    Hello Masa,
    We have not loaded our service hierarchy catalogi items from ECC nor SRM. We've manually set-up test-date via the import manager and data manager tools. This, as long as you set it up correctly, should still work in my oppinion?
    For the UI configuration the service (mss) is enabled causing the 'empty table' line to show up. If we would change it to 'product' the items would show but in a flat manner.
    Do you have any other pointers . F.e. what the item types should be (subitems: free-text and header: mss-header) and what the role of the mss-hierachy and mss-pricing table are and what we should do with those?  We've configured grouping (main item, component item, substitute item ..) to enable hierarchy is this correct?
    Ps. What does 'MSS' stand for, what does it mean?
    Kind regards,
    Tim

  • Doubts on SRM MDM Catalog

    Hi xprerts,
    Few doubts on SRM MDM Catalog...
    1. I am running SRM MDM Catalog 1.0 and when i launch the http://localhost:50100/webdynpro/dispatcher/sap.com/tc~mdmsrmui/MDM_SRM_UI_App (Webdynpro UI) am not getting the password field only server with no password is working here.
    What should be done to have this password field?
    2. I have deployed SRM MDM Catalog 1.0 webdynpro content and SRM MDM Java API on WAS 7.0 and i am using MDM Server as sp5 with SRM MDM Catalog repository .Will it work or not?
    Awaiting ur response
    Regards,
    Vijay

    Hi Vijay,
    Are you sure you have the latest patch for SRM-MDM? I am at SRM-MDM Catalog 1.0 SP01 Patch00 Hotfix02, and I now have the server password field displayed in Config UI (wasn't there in early versions).
    As for your second question, I guess you will have to be more specific. Or better wait until you set everything up, and run a test from Shopping Cart. Then revert with problems, if any.
    Cheers,
    Serguei

  • ECC TO SRM-MDM CATALOG THROUGH SAP PI

    We have a scenario where we are sending data from ECC to SRM-MDM Catalog through SAP PI and data is coming from ECC through proxy and sending to SRM u2013MDM catlog through file adapter. In ESR part we have used SAP defined standard service interfaces (CatalogueUpdateNotification as sender interface and MDMInfoRecordDataTransmission as a receiver interface). The mapping used is also standard one.
    Now we have got requirement to send the data for vendor mat no, manufacturer field of info records from ECC to SRM-MDM catlog.  But we are unable to find out these two fields in standard interfaces/messages. Can anybody guide us how to add these fields in the current data types or is there any other standard interfaces we can use.
    Thanks in advance.

    Hi Shiv,
    Many thanks for your reply.
    Since we're not using XI / PI scenario and this is an upgrade from SRM 5.5 to SRM 7, Iu2019m using the same approach that was already used in SRM 5.5 with CCM 2.0.
    The idea is that the catalogue and all the records maintained need to be associated to a contract. So, I add the contract ID and the correspondent contract item in the import file, in addition to the supplier name, product ID, price information and so on. I mapped the contract ID with the field contract price.
    In relation to the price information fields, as I want it to be visible for any user that accesses the product catalogue, I tried different approaches:
    1.Using OCI Price information u2013 amount, currency, price base quantity and price base quantity UoM;
    2.Using OCI Price contract u2013 amount, currency, price base quantity and price base quantity UoM;
    The first approach didnu2019t work very well, as I was not able to see price information when accessing the catalogue. I could only see it once I transfer the items to the SC. In addition, this approach had one problem. The products were displayed but it was not possible to select the items one by one. To do that I needed to select all the items of the catalogue and after that the detail of the contract ID was displayed in every item, allowing me to choose the items that I want to select to my SC.
    The second approach was better as the information was visible when accessing the SC and I was able to select all the items, one by one, as it should be. The main problem of this approach was that Iu2019m getting errors in the SC when the materials have stock u2013 u201CInterface data contains errorsu201D. Or alternatively, if the items didnu2019t have stock, the SC was possible, but when I tried to create a PO from that SC, It simply does not work.
    So, can someone help me? Any ideas?
    Thanks in advance.
    Best regards,
    Andreia

  • SRM-MDM Catalog Installation/Landscape

    Hi,
    We are currently having the following landscape in place with regards to the SRM, MDM and SRM-MDM Catalog :
    Server 1 :  SRM 5.0 Running   (HP-UX)
    Server 2:   Enterprise Portal running with MDM Content and SRM-MDM Catalog JAVA components  (HP-UX)
    Server 3:   Standard MDM Server installation  (Windows 2K)
    We have configured everything according to the notes and guides (including the guide from Sudhendu Pandey), but when we try to configure the Search UI in Webdynrpo, the java components cannot connect to the MDM host and we are getting just the connection failed error.
    My questions are :
    1)   Can we run with the above landscape or is it necessary to have the SRM-MDM Catalog Java components installed on the same server as MDM.
    2)   Do we have problems with versioning of the MDM server and the SRM-MDM java components ? We already replaced the MDM_JAVA_API with the correct one, but I do not have a newer version of the other api.
    3)   Do I need to configure anything on the MDM server to get this running ?
    Thanks in advance for your help
    Regards
    Raymond

    Hi Foh,
    Apologies for my late reply, but I was travelling.  Thanks for this tip. We were using the latest versions for the MDM Portal Content, but the API for the SRM-MDM catalog was different.
    I have updated this API with the latest version (Patch 3 HF 1) and now I can logon to the MDM server and I see the MDM Repositories. However if I now try to logon to one of the repositories he gives me the same error that the Login has Failed. The user that I am using is the default one coming with the SRM-MDM repository (Admin).
    Regards
    Raymond

  • Installation & configuration SRM MDM Catalog 3.0

    Hello Everybody
    I have SRM 7.0 ABAP & SRM 7.0 Java installed with different SID's.
    Can anybody please tell me step by step installation & configuration SRM MDM Catalog 3.0 ?
    I have referred note 1177779  & 1177780 .
    Thanks,
    PR

    You can get it here:
    https://sapmats-de.sap-ag.de/download/download.cgi?id=TX7G1TDRAETSXTLIICWNYGBHG9751YVJKY3NPP9WL9PEEZIXG5
    The password for the file is:
    TryMe1st

Maybe you are looking for

  • Error in calculating aggregate time in sqlserver 2008

    Hi, iam working in an employee management application in which i want to find out intime, outtime, overtime of each employee in a day. following is working code create table #temp(empid numeric(18,0),empname nvarchar(50),intime datetime,outtime datet

  • Random songs keep getting erased by itunes

    i have the ipod 30 gb video. i have noticed that some of music radomally gets erased. for example, i purchased a cd named "trick trick the people versus" from itunes, well after a while my ipod still lists the songs but they dont play. what could be

  • Why are my songs not numbered?

    why are my songs not numbered?

  • FI Functional - opinions required.

    Hello ,     I am working in ABAP for 2 years in a reputed Indian IT firm.     I am thinking of moving towards the functional side, as it suits my strengths better than Technical side.     I am interested in SAP FI. Planing to go for a SAP FI Certific

  • Safari 3.1 setAttribute very very slow!!

    Hi I'm developing an application using SVG and CSS and, after upgrading to 3.1, I discovered that the rendering of an SVG component after changing its class attribute is absolutely slow: it takes forever (literally). It is a simple element.setAttribu