Setting Up the System Landscape for ESS

Hello Experts,
I am implementing ESS in portal.
I am in step of defining systems in portal for ESS/MSS.
Below is link I am following from help.sap.com
[Link|http://help.sap.com/erp2005_ehp_04/helpdata/en/5b/76a6d7fd3a4e91bfb422405bf3e04d/frameset.htm]
In above link it is mentioned that we have to define following systems :
SAP_WebDynpro_XSS
SAP_ECC_HumanResources
SAP_ECC_Travel
SAP_ITS_XSS
SAP_BSP_EREC
Additionaly according to below Article in SDN :
[Link|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/21eb036a-0a01-0010-25a3-b2224432640a?quicklink=index&overridelayout=true]
Following additional systems must be created :
SAP_ITS_EBU Looks similar to SAP_ITS_XSS above
SAP_R3_Financials
Now the basis person in my project has handed over to me following systems :
SAP_BSP_EREC
SAP_ITS_FND Name mismatch as FND is used in place of XSS or EBU
SAP_R3_Financials
SAP_WebDynpro_ESS Name mismatch as ESS is used in place of XSS
Now below two systems are altogether missing as per first link on help.sap.com
SAP_ECC_HumanResources
SAP_ECC_Travel
Please explain if it requires to be corrected or name mismatch and missing ststems would do.
Thanking you in anticipation.

All the above names that you are referring to are not necessarily separate systems.
These are system aliases for a system object created in your portal via System Administration - System landscape.
So, if you have HR and Finance on the same backend server, then you need only one system with the related system aliases.
You will need SAP_BSP_EREC only if you are planning on using E-recruitment.
Similarly, you will need SAP_ITS_XSS only if you are planning on using any ITS applications.
It is pretty straight forward to change/correct the names of your system aliases instead of changing the usage of these aliases every where else.
SAP_ECC_HumanResources is absolutely necessary.
SAP_ECC_Travel is required if you are planning on using travel and expense related applications.
Also, note that SAP_WebDynpro_XSS should be the alias of the system where your webdynpro applications are deployed (typically the same portal server)
- Shanti

Similar Messages

APO - Basic settings for setting up the system landscape

Hi,
I have a, hopefully small, issue regarding setting up the system landscape for our APO - R/3 environment.
In our test system in R/3 I need to specify the APO release, which is not a problem. The issue I have in R/3 is when I try to save the new setting. The system asks for a workbench request even if the test system has been "opened" by the Basis resource.
I would like to avoid creating a workbench request as we are using an external tool ( HP PPM ) for transport management and I believe I will get into trouble since this workbench request should not be transported further into our production environment. As I have understood from our APO experts the settings must be maintained per R/3 system (development - test/quality - production) as it is pointing to corresponding systems in the APO landscape.
The question is, does anyone know how we can maintain these settings without any workbench request being created?
This is perhaps not a APO question, but I'm not sure in what other forum I should post it.
Thanks for any feedback
Br,
Lars

Lars,
I have difficulty envisioning any situation when you would wish to make any transportable change (workbench or otherwise) in a test system. The normal path would be to transport the change from the dev system into the test system. I am unfamiliar with the third party software (HP PPM) about which you speak. However, the standard controls currently used in your transport process (third party or otherwise) should limit which transports do and which transports do not get moved into your prod system.
I can think of several ways to approach this problem. I think you should consult with your supervisor before attempting such changes, to ensure that you are complying with all policies and procedures that exist for your company. In my company, this type of exception would require creation of special change management docs, and appropriate signoffs by management.
You are right this is not an APO question, it is a Basis question. For advice on the technical aspect of your question, try one of the Basis forums. Pick the one that is for the DBM you are using.
http://forums.sdn.sap.com/index.jspa?categoryID=1#34
Best Regards,
DB49

System Landscape for ESS/MSS in EP60 SP2

I have installed EP60 SP2 on J2EE 6.20 and MSSQL. I have imported business packages ESS 50-4 and MSS 60-1-5. I have created the folder Systems in Portal Content and created a system SAP_R3 with aliases SAP_R3_HumanResources, SAP_R3_Cross, SAP_R3_Travel, and SAP_R3_Financials.
My 4.7 R/3 system is app server R3DEV02.domain.com, system id DEV, sysno 01, client 100. My ITS server is http://itsdev01.domain.com:71/scripts/wgate/webgui/! using client 100. My EP path is http://sapport01.domain.com:50000/irj/.
Given this information, can anyone tell me exactly what parameters I must set in the system landscape for system SAP_R3 and what the values should be for ESS and MSS to work properly? If I go to the System Landscape Cockpit, system SAP_R3 fails all tests.
Any and all help is certainly appreciated.

Hello Gary,
WRT SAP_R3 system landscape test failure, I ran into the same issue earlier, for a SAP_R3_Dedicated system. Keep the same setting values, but leave the system id (DEV) Blank, then test.
Your definition of (Application Server Host Address + System Number) should be sufficient for a SAP_R3_Dedicated connection.
I hope this will resolve your system TEST problem.
Regards,
AAAttar

System Landscape for ESS/MSS

Hi Experts,
I am on ERP2004, EP 6.0 SP20. I am trying to create a system landscape for the ESS/MSS Applications. ALways the connection test fails. This is the landscape I am trying to create:
1. One SAP Dedicated Application Server: for SAP_WebDynpro_XSS
 Connector Details:
Application Host: <host>.<company.com>
SAP CLient: 010
SAP System Number: 00
Server Port: 3200 (Using Dedicated Application Server)
WAS Details:
 Host: <hostname>.<company.com>:50000
 Path: /webdynpro/dispatcher/
 System Alias: SAP_WebDynpro_XSS
System Aliases:
SAP_WebDynpro_XSS.
SAP_ITS_XSS
SAP_ITS_EBU
User Management;
Logon Method: SAPLOGONTICKET
User Mapping Type: admin,user.
When I am testing the
Connector Details:
I am getting the following errors:
1. Retrieval of default alias successful
2. Connection failed. Make sure user mapping is set correctly and all connection properties are correct.
WAS Connection Tests:
1. The system ID is valid
2. The system was retrieved.
3. The system object represents an SAP system
4. The following parameters are valid: Web AS Protocol (http) Web AS Host Name (<J2EE Engine Host>.<company.com>:50000)
5. The host name <J2EE Engine Host>.<company.com> was resolved successfully.
6. The server <J2EE Engine Host>.<company.com>:50000 could not be pinged successfully.
SSO is not set up yet. I do not understand why the details of J2EE Engine under WAS details in a system type : SAP Dedicated Application Server? Please help me. I am missing something.
I appreciate your help.
Regards,

Single Sign On set up and every application is working on portal.
But the ping always fails.
I do not understand one more thing from help.sap.com on System Landscape for ESS.
Documentation says:
Set up your system landscape. To do this, set up the following systems:
what kind of system this is: SAP_R3 or SAP_BW/SAP_CRM. In standard portal system template, there is no system like "J2EE engine".

System landscape for ess customization

Hi All
We are having 3 physical systems :
1. WAS + EP system
2.WAS + PI system ( SLD here )
3. WAS + DI system
We need to import the business package for customization purpose. I sthe above landscape fine or we need to have DI system & SLD on the same server ?

I got hold of a useful document at the following link :
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/50a9952d-15cc-2a10-84a9-fd9184f35366.
One more query : should the WAS of EP usage type and the WAS of DI Usage type be on same patch levels ?

How to set up the System Landscape Directory

Hello Forum,
I have installed Netweaver sneek preview - Java version.( on Windows box)
I want to configure SLD on this how to go ahed ???? My other systems are
1. R/3 4.6C on Unix box
2. Netweaver (BW 3.5, EP 6.0) on Unix box
I want to make Netweaver sneek preview as SLD Server.
Thanks a lot
Ravish

Hi Ravish,
Please have a look in https://websmp204.sap-ag.de/sld. Then navigate to
Solution Life-Cycle Management ->
System Landscape Directory ->
Media Library
And choose the document "SLD Getting Started - Check List".
Best regards,
Amit

Detail system landscape for SAP APO

Hi All,
Can u pls tell me the system landscape for APO with pictures. (i.e data flow in between ECC to APO through CIF also between APO submodules)
purpose: need to prepare PPT.
Thanks.

Hi
Find the link WRT system integration
System Infrastructure (SAP Library - Integration of SAP APO and SAP R/3)
pls follow below thread for more info
Integration multiple R/3 systems with APO via CIF
Raja kiran

PRD - System landscape for Enterprise learning solution

HI all,
I want to setup the system landscape for my production server.
I have 4 system. My Plan is
1st System - DB + Ecc6
2nd System - LSOFE
3rd System - EP
4th System - lsocp + KM flat file repository
By default the ECC6 comes with LSOFE.
My question is -- How to install LSOFE in separate host ?
Can i go with add-in java for EP for 3rd System ?
any pdf or link ....Kindly send to me.

My question is -- How to install LSOFE in separate host ?
As far as I know LSOFE is an add-on so you need a SAP system... only way will be to install a system in you other host.
Can i go with add-in java for EP for 3rd System ?
Why not... (I'll look into the future utilization of the portal and If its better off as a standalone Java installation)
Regards
Juan

HT3775 I can not open a video movie clip, the system ask for a codec, how can a set up that automatlicly

I can not open a video movie clip, the system ask for a codec, how can a set up automatlicly?

The problem was resolved a small manipulation - on stage Basic Configuration,
point 3 "Configure CA Introscope"
I forgot to add to the list of CA Introscope Enterprise Managers link to my manager.
Thus it is necessary to take into account that the path should be correct (usually for linux - /usr/sap/ccms/apmintroscope) and the directory should be applied appropriate privileges.
Then in paragraph "Byte Code Adapter Installation" - there are all the necessary data, and it starts to work correctly

Warning: Problems occurred during synchronization of the system landscape

Hello
I have created systems in system landscape, TMS is working fine, all the configuration steps are completed successfully.
am working in Solution Manager 4, in project change -SOLAR_PROJECT_ADMIN - Project Administration - in 'System Landscape' tab  Change request and when I activate change request management I am getting following messages:
1. Warning: Problems occurred during synchronization of the system landscape
2. The project is not released. Hence cycle can not be created.
Its bit urgent as I m in middle of this activity, please assist me on the same
Thanks
Sharmishtha

Hello Jason & Prakhar
Thanks for your quick response. I am basis person, and configuring this change request management for one of the project.
Jason:
Will you please check with your basis person about these settings and let me know the same. I have set the settings as follows
C= Development (source system)
T = Quality
P = Production
Prakhar:
I have checked with all RFC connections are working fine, authorizations are also properly given.
I didnt get your point No correctly defined maintenance project exists, I have already created project in project administration transaction, assigned the system landscape, I have activated project IMG in IMG Project and then going in change request tab to activate the change request management, where its giving me above error.
More over, as you have mentioned I am getting following message in SLG1:
Project CHARM_GBW not found in the project administration table
This is asking me to do following things:
Synchronize the project in Change Manager with the Solution Manager. Call the Solution Manager with the transaction SOLAR_PROJECT_ADMIN, and go to the 'System Landscape' tab, and then the 'Project Cycle' tab. Select the 'Change Request Management' field, and choose 'Refresh'. Project CHARM_GBW should then be available.
Where do I have to make entry for this? I can see the entry in /TMWFLOW/PROJMAP table too. I dont know what more I need to do for this.
Problem is I cant see Project Cycle tab in System Landscape. Prakhar, frankly I am not able to find any step wise document on this part. So will you please help me with some documents on this? I am from technical side thus there is bit difficulty to understand this scenario from functional view.
I will be grateful for your help,
Thanks
Sharmishtha

System configuration for ESS/MSS Implementation

Hi,
I am stuck while configuring the systems for XSS configuration. I have completed following:
1) Installed Portal 7.00 (based on NW2004s) which uses the backend ERP2005 system as a User Master source.
2) Implemented the business packages for ESS 1.0 (SP6), MSS 1.0 (SP6) and SAPPCUI_GP 600 (SP6).
3) Configured the SLD ( we have SLD running on a separate XI system)
4) Configured JCO destinations (tested ok).
5) Configured Systems for Portal and the ERP systems with system aliases.
    For Portal System:   I have only configured the WAS properties (i.e. hostname, path and protocol).and User management (using UDIPW as the logon method)
The system alias is SAP_WebDynpro_XSS
    For ERP System: I have configured connection, user management and W.A.S. properties. The system aliase is SAP_ECC_HumanResources
However, when I perform the connection tests for both systems, they both fail for "Connection Test for connectors" test. It gives the message "Connection failed. Make sure the user mapping is set correctly and all connection properties are correct".
Any help is greatly appreciated.
Regards.

Hi Kristoffer,
I have tried as per your suggestion but it still gives an error.
The connector properties for my ERP system are as below:
Application Host : C1BL1 (also included the domain)
Gateway Host   : C1BL1
Gateway Service : sapgw00
Logical System Name   : ER1CLNT210
Remote Host Type - 3
SAP Client   : 210
SAP System ID (SID) : ER1
SAP System Number : 00
Server Port : 3200
System Type - SAP_R3
System aliases for ERP system are:
SAP_ECC_HumanResources and SAP_R3_Financials.
I have not maintained any W.A.S. properties for this system.
For my Portal system: WAS properties are:
Web AS Description : EP_Portal
Web AS Host Name : C1BL3:50100
Web AS Path   : /webdynpro/dispatcher/
Web AS Protocol - http
I had not maintained the connector properties for this system before, but I have now maintained as following:
Application Host : C1BL1 (also included the domain)
Logical System Name   : ER1CLNT210
Remote Host Type - 3
SAP Client   : 210
SAP System ID (SID) : ER1
SAP System Number : 00
Server Port : 3200
System Type - SAP_R3
The system alias for EP is: SAP_WebDynpro_XSS
In the UME configuration --> User mappings, I am using SAP_ECC_HumanResources system as the reference system.
Please let me know if you need more info.
Regards,
Nilesh

3 System Landscape for NW2004s BI?

Hi All,
Given the scope of BI systems in NW2004s BI, what is the recommendation regarding 2 vs. 3 system landscape for BI?
With BW, it was (relatively) easy to maintain a Dev, QA and Production system. Now with Portal and Java components of BI, the hardware requirements for a third (QA) instance would make it harder to justify?
What experience have people had with 2 vs 3 system landscapes for BI in NW2004s? Has anyone come across an SAP recommendation or best practice for this?
Thanks,
Matt

Hi Matt,
The NW2004s set-up by default installs the EP and other portal components when you select the Java stack. So I guess your question was whether we can have 1 EP system and 3 BW system in the landscape. But from my experience the lanscape has remained the same i..e - 3 BI system and 3 Portals, the reason clearly being that in order to fully utilize the BI7.0 frontend you need a portal. Now using 1 portal would put lots of load on it as in BI 7.0 many components require portal - Integrated planning, web reports, Admin cockpit, etc.
Bye
Dinesh

You do not have permission to view the System Landscape Directory.

Hello there,
When I accessed my SLD from portal, it took me to the page but kept saying:
- You do not have permission to view the System Landscape Directory. Minimum required: UME role with permission com.sap.lcr.LcrUser and J2EE role LcrUser. See the SLD Post-Installation Guide for details
- SLD not configured; configure the SLD in Administration first.
I searched on these forums for the above error. Got some results, but nothing really substantial that has helped/fixed my problem.
I also read a bit on SLD from the pdf file named: System Landscape
Directory of SAP NetWeaver 2004s
I also worked on the security roles and actions to individual
users or user groups like for ex: the above pdf file advised I map the security roles from Visual Administrator, to the created roles in the portal. I've done that too. Like create a user group: 'SAP_SLD_ADMINISTRATOR' and create a user role corresponding to it, which would be: 'LcrAdministrator'
Then, I went to visual administrator, and clicked on 'Assign User Groups to Roles'
Even after this, I tried to access the SLD from portal: It is still giving me the same error I mentioned above in bold italics.
Can somebody please help me how to fix this issue?
Thanks
Dino.

Graham:
Thank you very much for making the effort to reply to my query.
But, it still hasnt solved my problem yet.. for some reason even though I followed your instructions and did what you advised.
I have attached a screenshot of my Visual Administrator screen that you advised me to modify/change.
Here it is: http://img166.imageshack.us/img166/2259/screenshot002co1.jpg
After I made the changes, I restarted the J2EE server and went to my portal SLD page: [http://org-x:50000/sld]
Tried authenticating usernames: LcrAdministrator and Administrator.
Both attempts resulted in the same error show below:
- You do not have permission to view the System Landscape Directory. Minimum required: UME role with permission com.sap.lcr.LcrUser and J2EE role LcrUser. See the SLD Post-Installation Guide for details
- SLD not configured; configure the SLD in Administration first.
I am wondering, if you would have another workaround regarding this issue, can you please let me know?
Thanks
Dino.

When I click the launchpad, (I have icons on 2 pages) how do I return to the 1st set when the system seems to automatically shift to 2nd page?

When I click the launchpad, (I have icons on 2 pages) how do I return to the 1st set after the system seems to automatically shift to 2nd page?.
I'm not aware of anything I might have done, but it's annoying to want to use an icon on the 1st page, only to see all the icons on page 1 shift rapidly to the left
and I can't find a way to shift back to page 1.
Is there a way of getting all my Launchpad icons onto 1 page by adjusting their size?

Thanks for that. I think the 2 little white dots were hidden by the white frame round the desktop picture on my screen
As you can see from the pic, there is a broad white frame around the image.

First RFC call failed, config not loaded. Check the System landscape configuration.

Dear Experts,
We are getting below error on portal while using the BEX query in BI system.
Error:
BEx Web Application
Error: First RFC call failed, config not loaded. Check the System landscape configuration.
Exception occurred while processing the current request; this exception cannot be handled by the application or framework
Failed to process request; contact your system administrator
To facilitate analysis of the problem, keep a copy of this error page
We are sorry for the inconvenience.
As the ITS & WEB AS connection tests go successful on object created for BI system in portal.
Kindly suggest me on this issue..
Thanks,
Bharath.

Hi Bharath,
Please go through the below SAP Note and let me know if this helps.
1903392 - Error: First RFC call failed, config not loaded
BR,
Anurag

Setting Up the System Landscape for ESS

Similar Messages

Maybe you are looking for