Setting up WRT 45G with an in office network. .

Internet modem is in network room a floor below. I want to set up access to wireles for my floor. My computer access to internet is via wall line. How do I set this up so I can have the router on my flor.

The linksys router will not communicate wirelessly with the modem.So you have to connect the Modem to the Router on the Internet Port and connect the computer to the router on ethernet port..Open the setup page of the router by typing 192.168.1.1 in the address bar..Configure the as per the ISP settings..Once it is configured you can disconnect the computer from the router and you have the wireless signal from the router.

Similar Messages

How do I Set up airport extreme with existing fios wireles network

Hello al, l I have an existing wireless network with an arcitonic wireless router provider with my fios tv. Everything is working well. Now I want to add airport extreme to increase my network range and later add apple tv /net flicks I,m not great with this stuff. Some wold be great.

You will need to establish a permanent Ethernet cable connection from one of the LAN <-> ports on the Fios router to the WAN port (circle of dots icon) on the AirPort Extreme and then configure the AriPort Extreme to "Create a wireless network".
You can configure the AirPort Extreme to provide another separate wireless network if you wish, or if you assign the same wireless network name, and use the same security setting and password that the Fios is using, the Extreme will provide more wireless coverage....and you won't have to change wireless networks to connect to the wireless on the Extreme.
Follow the guided setup using AirPort Utility to "create a wireless network". The setup will suggest that you configure the AirPort Extreme in Bridge Mode, which would be the correct setting when used with the Fios router.

Help/Advice needed on setting up home office network please

Hi
I hope someone can help me with some technical difficulties i am having with a home / office network.
Computer equipment i have is:
2 desktop PCs on same floor different rooms.
2 laptop PCs to be used wired in office and/or Wifi if possible any room
2 Apple mac Laptops to be used wired in office and/or Wifi in any room.
1 HP Laser printer with network enabled
1 TB HDD network enabled
1 Linksys WiFi extender unit
Connection equipment:
I have an NTL Cable modem
Linksys WR54G ver 2 router ( with the option of going to aLinksys WRT300N ver 2 router)
A Netgear Dual speed hub DS116
What i would like to do is have one office holding 1 desktop pc, 1 HP Printer and the other office holding the 2nd desktop PC with USB printer attached. I would like to be able to go Wifi around the house for all PC & Mac Laptops with the option of connecting them by wire in the office if required.
Idealy i would like to be able to share files, folders and printers between all units as well as all having internet access through the router's firewall.
I also use Zone Alarm Pro.
At the moment i have in one office the WR54G attached to the cable modem with one Desktop PC wired in to one of the 4 ports. in a 2nd port i have a cable going to the 2nd office into the DS116.
Connected to the DS116 is the 2nd Desktop PC, the HP Laser printer and the 1TB HDD.
The Wifi extender is in another room.
For some reason every now and then the whole system goes wobbly and seems to loose settings at which point internet access is denied and ihave to go back to 1 pc into the cable modem and starting rebuilding the network.
Can anyone give me an idiots guide to settin this kind of system up with specificsettings on each item if possible.
I would say i would also like to use 1 desktop PC for gaming now and then which at the moment sems very hit and miss with speed etc.
Any help warmly welcomed
Best Rgds
Kev

ryclark wrote:
Following on from Steve's advice I would probably not bring the unwanted channels all the way down on the faders, either in a live mix or if mixing subsequently in Audition, as it may change the background acoustic too much. Leaving a bit of the background mics faded up a bit helps to pull the whole recording together and also means you have a better chance of getting all the faders back up in time for when they are needed without missing anything.
I didn't actually touch on this at all - perhaps I should have. There's definitely more than one way to undertake this sort of operation, and it rather depends on exactly what equipment you have available. So far, we know you've got potentially 16 channels available, but have no idea how you were planning to cover the different aspects of it. For instance, I would always consider it worth it to have a pair of ambience mics up all the time - which would get around this particular problem anyway....
The other thing you really have to pay quite a bit of attention to before you start is making damn sure (the previous day) that everything is in good order, and it all works when connected together. And if, for instance, you're going to rely on radio mic feeds from clergy, that you can tap into these without difficulty, etc. Make sure your mic stands are not falling apart, and that you've got all the right mic stand adaptors - amazing how many times people have screwed that one up!
What this generally means is that even if you're familiar with the location, you still need to do a reccé just to make sure that everything in the venue is as you think. And if you can grab a dedicated assistant for the event, go for it. This can make carting stuff about a lot easier, and provide additional security for your equipment. And sometimes other benefits too, like tea...

Advice on how i can set up an office network with 40 computers.

I am planning on setting up an office network with 40 computers. What do you think is the best way i can do this? Thank you in advance.

Your first step should be to call an IT professional who has experience with this type of thing. He will need to survey the entire area and ask you dozens of questions about how you want things to operate. Then, he will present you with a proposal for the network listing all of the things that the system can and and cannot do.
Your second step would be to call another IT professional who has experience with this type of thing and go through the same procedure.
Your third step would be the same as the first and second.
Your fourth step would be to check the references provided in the steps 1-3 and then decide on which professional that you want to use.

Set up a family with Apple Products

What is the best way to set up a family with multiple apple products?
Equipment:
My wife and I each have iPhone v4s
We have an AppleTV version 1 and an AppleTV version 2
iPad 2
NAS in the closet with iTunes server (which we don't utilize)
iTunes installed on the desktop in our office on a computer that we share. We each have our own user account.
Media:
Ripped 1000s of cd's to itunes on my account
Music bought on wife iPhone, sync'd to her library
Music bought on my iPhone, sync'd to my library
Redeemed music on my iPhone, sync'd to my library
Digital copies of movies from DVD packs in my library
Purchased movies and TV shows on AppleTV version 1 sync'd to wife library
Multiple apps that have been purchased, each different on each of the different iOS devices
Detail questions:
My wife wants to have ALL of the ripped music and movies in her account. How do I set this up so I don't have tons of duplicate files and have to manage importing new rips to multiple libraries?
To have the Apple TVs work, we need to be logged in to wife's account and have her iTunes running. If I dock my iPhone on that computer, then it tries to sync to her account. If I turn off her iTunes, then the TVs don't work. How do I set this up so we don't have to worry about who's iTunes is running to watch AppleTV and to sync our iProducts?

It is not possible to use any D-Link product in an Apple WDS, since none of D-Link's products support Apple's implementation of a WDS.
If you are in the market to buy a non Apple wireless router, get a Linksys WRT54G or WRT54GS - these two models do support Apple's WDS. Use that router as your network's "base station", and use the Airport Express to wirelessly extend the range of its network.
If all you want to do is extend the range of an existing Airport Express that you do not want to replace by a non-Apple wireless router, I recommend you spend the money to buy a second Airport Express.

How do i set up and automatic out of the office message while I am away on vacation?

How do I set up an automatic out of the office reply while I'm on vacation?

Firefox doesn't do email, it's a web browser.
If you are using Firefox to access web mail, you need to seek support from your service provider or a forum for that service.
If your problem is with Thunderbird, see this forum for support.
[http://www.mozillamessaging.com/en-US/support/]
or this one
[http://forums.mozillazine.org/viewforum.php?f=39]

UM175 - Not able to connect to office network with VPN

I am having trouble connecting to my office network using this wireless card, UM175, and connecting with a VPN. I have the VPN set up the same as many other computers connecting to our server. Currently when I start VZAccess, I can access the internet and everything works fine. When I start my VPN to connect to my office server, it takes multiple tries with error 691 being returned. After two or three tries it connects. I can ping my computer from the server. I can ping my router and my server from my notebook with the UM175. However, I cannot do anything with the server. I cannot access the internet, access files from the server, or access any software on the server. I contacted IT and our administrators and they tested the system and VPN and state that there is a problem with the modem UM175. Is there some setting that I must set to make this work correctly. This is an urgent matter and must be working, or I will have to purchase another type of modem.

Where are you located? I'm in the Bay Area, CA and I was using the UM175 with my PPTP VPN without any problems. However, I recently upgraded to the new 4G on Wednesday and now the PPTP VPN won't authenticate...errors on verifying user name and password. I did a packet trace and found GRE packets are being dropped. This is a Verizon issue and it appears their 4G upgrades have directly caused this problem.
There is another thread about this issue located here: http://community.vzw.com/t5/Broadband-Netbook-MiFi-Devices/LG-LTE-Modem-VPN-Not-Working/td-p/349846

Anybody with isues running office:mac 2011, I am using Mac OS 10.6.8 It ran for years then recenty started giving me error message that it might not be compatible. I tried reinstaling with no luck.11?

Anybody with isues running office:mac 2011, I am using Mac OS 10.6.8 It ran for 2 years then recenty started giving me error message that it might not be compatible. I tried reinstaling with no luck.11?

I think my problem has been that in Sytem Preferences>Mouse, my "Double-Click Speed" was set to the SLOWEST setting. After some experimentation, I now have the that setting two notches from the "Fast" end of the scale. In case it's important, the "Primary mouse button" in my Preferences is set to "Left".
This not only solves the text selection issues described, but also seems to eliminate the strange "resolving alias to" problem.
[For the curious, I have a Logitech Performance MX wireless mouse which can be configured with "Logitech Control Center". But the LCC software doesn't control double-click speed; this setting can only be made in the Mouse System Preference pane.]

How can I create additional security with my ipad on a shared office network?

How can I create additional security with my ipad on a shared office network?

Haven't heard of any security explotes on the iPad. That should tell you security has been built in.
Great password. Set up remote wipe in case iPad goes missing. Backup iPad regularly.
Robert

With my hp office 5010 all in one printer, i'm not able to scan, and this is one of his duties. why

with my hp office 5010 all in one printer, i'm not able to scan, and this is one of his duties. why isn't it possible?? Bad ssoftware while downloading it from internet because I lost CD rom. No pilot available for scanning with it??? Bad version of soft??? I bauught this printer because of his utility and space occupped: able to print, copy and scan in same machine, gain of room, perfect, but my scanning function is not working!!!! I would like to solve this damned problem which upset me since several weeks.... Waiting for an answer and a solution, best regards

pmonteil31 wrote:
Waiting for an answer and a solution, best regards
Hi,
Sorry you have to wait longer because I can not find your printer model under Google. Must be very old ?
Regards,
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Setting up airport extremes with mobile netbook cart

I work in a school environment, running windows. We have four mobile carts in the high school. We have an airport extreme for each of the carts. In our situation, the airport extremes are mobile. They do not stay in one location all the time. The teachers connect the airports to a wired connection in their classrooms. We have the netbooks set up to automatically connect to an airport when in range. I have each of the airports setup the same way; create a wireless network, each has it's own network name, radio mode is automatic, channel selection is automatic. Internet options are connect using ethernet, connection sharing is off (bridge mode) and tcp/ip is static. There are a couple of issues we seem to be having. One is that the airport with the stronger signal is not always the one the netbook connects to. I could have one classroom of netbooks connecting to an airport that is located two classrooms down the hall when there is airport in the classroom that has a stronger signal. What could be causing this? We push out settings to the netbooks via group policy, such as redirected desktop and network shares. When a user logs in they don't seem to get the whole policy all of the time. If you restart or logoff then login, the netbook gets the policy correctly. Could this be a problem when multiple airports are in range of the netbook trying to access the network? Is having the airports mobile, moving from one room to the next, a bad idea? Thanks for the help.

tried this but it didnt work that well, the distance between the main airport and the extenders is too long. Also, when choosing extending, it came bugging me with incorrect dhcp settings. Couldn't solve that.
So i configured allt he extremes with creating a wireless network, same ssid and same wpa settings. Als bridgedsetting is disabled.
That seems to work. Anyone with an opinion about this configuration?

Hi! This might be a stupid question, but I just bought an IPod G5 60 GB. When you firstconnect your IPod you have to setup your ID. I'm using my brothers computer, who has an IPod too, so now I'm wondering when I set up my ID with his Itunes does his Ip

Hi!
This might be a stupid question, but I just bought an IPod G5 60 GB. When you firstconnect your IPod you have to setup your ID. I'm using my brothers computer, who has an IPod too, so now I'm wondering when I set up my ID with his Itunes does his Ipod still work with it??? Or would his ITunes just see my IPod? Or does his Ipod ID change to my ID?
Or does it work without any problems, to setup two IDs on the same computer??
Thanks!

Hi!
This might be a stupid question, but I just bought an IPod G5 60 GB. When you firstconnect your IPod you have to setup your ID. I'm using my brothers computer, who has an IPod too, so now I'm wondering when I set up my ID with his Itunes does his Ipod still work with it??? Or would his ITunes just see my IPod? Or does his Ipod ID change to my ID?
Or does it work without any problems, to setup two IDs on the same computer??
Thanks!

Why do i get a BOBJ prompt in xcelsius with my live office feed

dear all,
the situation ...
i have an excel document, with a live office feed. the data feed is assigned a specific user from the sap ecc backend system. i have this excel live office saved locally on my c drive. i can open it up, and hit the refresh button without any need to log on.
my question
why is it then, when i add this live office feed to my xcelsius dashboard, do the live office steps in xcelsius, and when i do a preview, it only wants me to authenticate myself, and pops up a prompt.
i would have thought, there would be no need !
anyone ?
cheers
g

hi amr
i realize to refresh a LiveOffice connection, from Excel or Xcelsius,,, you have to enter your user name and password.
and i also understand that, if you're not being asked for an authentication from the excel when you refresh the LiveOffice, that means your Credentials are saved into the excel itself, i mean into the "Application Options"
BUT,
when i use the same LO document inside xcelsius, it prompts me. note, i am not talking about enterprise here. nothing is saved on the BOBJ server side, it is all local to my c drive.
so in summary, when the live office is outside xcelsius, i can open, refresh and because the logon parameters are in the application options, i get the authentication hour glass, but with no prompt, and eventually i get my data.
however, when i add this to an xcelsius dashboard, and do a preview, i get an authentication prompt !! why ??
cheers
g

We have an older IMac (preIcloud) and just purchased a new Macbook Air. Our Iphones are set-up to synch with the IMAC and my calendars on the IMac & the phone look the same. But when I open ICal on the MacBook Air my calendar is missing items? Help..

We have an older IMac (preIcloud) and just purchased a new Macbook Air. Our Iphones are set-up to synch with the IMAC and my calendars on the IMac & the phone look the same. But when I open ICal on the MacBook Air my calendar is missing items? Help.

Are you wanting to import iCal to the MacBook Air. Since iCloud doesn't work with 10.6 OSX you probably don't have any data in iCloud yet?

How to set up Airport Extreme with Charter ARRIS Modem TM902A for the first time for WIRELESS.

How to set up Airport Extreme with Charter ARRIS Modem TM902A for the first time for WIRELESS.
When Charter Tech goes to your site, have them connect the modem up, but do not connect the modem to your iMAC or MacBook Pro. What you want to do is connect the Airport Extreme to the iMac or MacBook Pro first with the Ethernet Cable. You have to do this to configure via Airport Utility to set up the Base Station Name & Base Station Password.
You will then create/configure a Wireless Network, create your Wireless Password that will be entered on each of your Devices, example, Apple Tv, your iPhone, etc., you want to allow access to your Wireless Network you are creating.
Wireless Security will be -> WPA/WPA2 personal or just WPA2
Enter the Wireless Password you want
Verify the Wireless Password (enter it again)
After it is created you will see it on the Airport Utility window with the name you created for it and to the left, will be a Dot (circle that will be yellow).
Next you then want to unplug the power to the Airport Extreme, and then take the end of the Ethernet cable you unplugged from the iMac or Lap top MacBook Pro and connect it to the back of the Modem.
Next unplug the power cord from the modem and wait about 5 minutes, then plug the power back into the Arris Modem and wait until all lights come back on the modem wait
about 5 minutes, then plug the power cord back to the Airport Extreme and you will see it the light blinking yellow. Wait about 5 to 10 minutes, during this time Restart you IMAC or MacBook Pro, and once it is back up click on the Airport Utility and you should see on the Airport Utility screen.
For INTERNET to the left the light should be green and you should see the Airport Extreme also appear and the light to the left on the screen should also be green. If they are, you then should be able to click on the Wireless Symbol on top of bar of the screen and click to select the Wireless Network Name you created.
If you Do Not See the light (Icon) next to INTERNET turn Green, or if you see the Internet Light Green, but the Light (Icon) next to the Airport Extreme is yellow, unplug the power again to the modem and unplug the power again to the Airport extreme and wait about 15 minutes or up to 30 minutes. Then plug the power cord back to the modem wait till all the lights light up then, plug the power cord back into the Airport Extreme and Restart your iMAC or MacBook Pro.
The Airport Extreme light should change from yellow to green. Open up the Airport Utility to see what the indicators are showing they should both be green. Again select Wireless network you created under the Wireless Icon on the top right of the screen. Open Safari and see if you are able to Route to a web page or the apple site should appear.
WHAT TO DO IF YOUR AIRPORT EXTREME WAS PREVIOUSLY SET UP FOR USE WITH ANOTHER CARRIERS ROUTER OR MODEM.
NOTE: If you already had your Airport Extreme connected for example, I previously had ATT Uverse and the Airport Extreme was connected to the Wireless Router Model 3801HGV, I disabled the Uverse Wireless and used the Airport Extreme for the Wireless signal in bridge mode, as the Airport extreme Signal is much stronger than the Uverse router, and I was able to obtain a Wireless signal with the Airport Extreme way much better with no signal loss which was very very frustrating with the Uverse router.
Anyhow if you had it hooked up like this, now that you will be using it with the Charter ARRIS Modem TM902A, you will need to reset the Airport Extreme to clear out the old data it has in memory, with the previous set up otherwise it will not work. Trust me I spent 6 hours trying to make it work reading all Apple Support Community questions and answers relating to this type issue/problem others have been having trying to get their set up working. I tried all the tips, and I finally decided just to see if by chance I would be able to connect with someone with Charter Tech support who might be familiar with Apple to be able to assist me and by luck I did. He told me why it was not working and was all due the previous configuration with the ATT Uverse router was still in memory with the Airport Extreme. Finally it was 10:30 PM when I decided to call Charter Tech Support and I had been working on this since 3:00 pm pacific. I did not call them earlier as all the post I read said they never received any good help from Charter. After calling them I finished up by 11:00 PM and was able to finally connect Apple Tv, iMac, iPhones and Macbook Pro. We love our Apple Product and Happy all is connected with the new
Internet Provider Charter. I must say the speed is way way much better than it ever was with AT&T Uverse.
THIS IS WHAT YOU WILL NEED TO DO:
First you will need to unplug the Airport Extreme, then by taking the tip of a pen or paper clip end you need to push the reset button on the back of the Airport Extreme and hold it
down and at the same time plug the power cord back into the Airport Extreme count to 5 or 10 then release the reset button. Then once he light in front of the Airport Extreme stops blinking you need to plug the Ethernet cable from the Airport Extreme to your iMAC or Macbook Pro, and restart which ever one you have, then open the Airport Utility once it is back up. If you see airport extreme pop up with the old network name or it shows and yellow triangle click on the Airport Extreme ICON it will not let you configure it but will ask if you want to get rid of it or remove and just do it. Then Again restart your iMAC or MacBook Pro, open up Airport Utility again, and on the top left you should see under “Other Airport Base Stations” the MAC ID for the Airport Extreme.
You will then create/configure a Wireless Network, create your Wireless Password that will be entered on each of your Devices, example, Apple TV, your iPhone, etc., you want to allow access to your Wireless Network you are creating.
Wireless Security will be -> WPA/WPA2 personal or just WPA2
Enter the Wireless Password you want
Verify the Wireless Password (enter it again)
After it is created you will see it on the Airport Utility window with the name you created for it and to the left, will be a Dot (circle that will be yellow).
Next you then want to unplug the power to the Airport Extreme, and then take the end of the Ethernet cable you unplugged from the iMac or Lap top MacBook Pro and connect it to the back of the Modem.
Next unplug the power cord from the modem and wait about 5 minutes, then plug the power back into the Arris Modem and wait until all lights come back on the modem wait
about 5 minutes, then plug the power cord back to the Airport Extreme and you will see it the light blinking yellow. Wait about 5 to 10 minutes, during this time Restart you IMAC or MacBook Pro, and once it is back up click on the Airport Utility and you should see on the Airport Utility screen.
For INTERNET to the left the light should be green and you should see the Airport Extreme also appear and the light to the left on the screen should also be green. If they are, you then should be able to click on the Wireless Symbol on top of bar of the screen and click to select the Wireless Network Name you created.
If you Do Not See the light (Icon) next to INTERNET turn Green, or if you see the Internet Light Green, but the Light (Icon) next to the Airport Extreme is yellow, unplug the power again to the modem and unplug the power again to the Airport extreme and wait about 15 minutes or up to 30 minutes. Then plug the power cord back to the modem wait till all the lights light up then, plug the power cord back into the Airport Extreme and Restart your iMAC or MacBook Pro.
The Airport Extreme light should change from yellow to green. Open up the Airport Utility to see what the indicators are showing they should both be green. Again select Wireless network you created under the Wireless Icon on the top right of the screen. Open Safari and see if you are able to Route to a web page or the apple site should appear.

I just got a Charter Modem. Model TM822. While I was moving, my Airport Extreme was still at my old place.
I have a Linksys WRT320N I used for the initial Charter setup.
I can get my Airport to work here, but the Internet light on the Modem flashes Yellow.
Hasn't caused any issues so far but one thing I did notice.
On the Linksys there were 3 DNS servers listed.
The Airport Extreme only lists 2 and i don't see where I could add another, only change whats already there.
I tried everything above, but light on modem still flashes yellow.
I have the technicians cell phone. Told me "that shouldn't be" and gave the same advice listed above.
I'll break down and call Charter one day, see if it's on their end. NSA tracking may need a reset LMAO.

Setting up WRT 45G with an in office network. .

Similar Messages

Maybe you are looking for