Setting Workflow status not working in imported workflow from SPD to Visual Studio

Hi all,
I have created SPD workflow and imported in visual studio. When I deploy imported Workflow using visual studio feature I found that Setting Workflow Status action is not working. Do I need to change Set Workflow status activity in Visual studio to make it
work.
Rohit Pasrija

Hi,
According to your post, my understanding is that Setting Workflow status did not work in imported workflow from SharePoint Designer to Visual Studio.
I try to reproduce the issue and the result is the same as yours.
After I import the workflow, choose the .xoml file, the view is as below:
To troubleshooting the issue, I add a new item to the project and select “Sequential Workflow” in the template.
After I click the Tool, I find that there don’t have the “SetCustomWorkflowStatus1” activity.
To set the status of the state, we need to use the “Set State” Activity in the “SharePoint Workflow” toolbar.
That is the reason why the “SetCustomWorkflowStatus1” activity does no work.
More information:
Apply Custom Values to Visual Studio Workflow Statuses
Thanks,
Linda Li
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Linda Li
TechNet Community Support

Similar Messages

Mouse not working when importing timeline from premiere

This actually happens in a number of Adobe operations. Sometimes I can tab from one selection to the next and get by, but with this particular operation, I can only close the window with the mouse.
I actually get past the first import as timeline window where I can select the premiere project file. I then get to select the sequence and that is when I have no mouse control within the window and
thus can not select the sequence. Using the tab or enter keys also does not work. I can only close the window. Any suggestions?

Hello, I just had a problem similar to this: lines appearing everyehere, somestimes the brushdots didnt appear at all, the first line a drew = nothing, second line drew = first line. It was really wierd.
I tried almost everything, from re-installing PS, Going back to vanilla settings, reistalling mouse drivers. But nothing of that worked.
BUT I FINALLY I FOUND A SOLUTION! and it was so easy and obvius that i behind it.
All I had to do was to update my graphicscard driver! Yeah...
I hope it works for you to.
best of luck.
Update NVIDIA driver: http://www.nvidia.com/Download/Scansg.aspx?lang=en-us
Or
Update ATI driver: http://sites.amd.com/us/game/downloads/Pages/downloads.aspx
(If you have the latest driver allready, just re.istall them).
P.S. sorry if my english was a little bad.

Design view not working after importing project from Flex Builder

After importing a project from Flex Builder to Flash Builder I am no longer able to see anything in the design view. I am using the flex 4.5 sdk.
Any idea how I can get this design view working? I heard it could have something to do with the metadata directory but am slightly lost here?...
Adam

Could you please provide more information as to what exactly are you importing. Also does Design View not lauch at all or does it give errors. Would it be possible for you to share the logs.
Meanwhile you can try cleaning the workspace and importing again to see if that solves the issue.

Workflow is not working

Hi everybody;
I'm teaching in a University and recently was provided to us a server for testing Podcasting lectures. Xserve 2 Ghz PowerPC G5, 1Gb RAM and 232 Gb HD (just 9 GB used), Leopard 10.5.2 OS. Of course we choose the hard way so no assistance for setup was hired.
My problem is that I can subscribe to my Podcast server with iTunes but I get "no new episodes from Podmac(my group)".
(1) I went into Server Admin under Podcast Producer and set the default Properties. (2) xGrid services and Podcast Producer are runnig.(3) open directory and kerberos are running in the same server. My guess workflow is not working; the files stacking up in the podcast recording directory and nothing goes to the podcasts directory. At Podcast producer server Log I get;
+Thu Apr 10 20:58:54 -0500 2008 -- Processing Podcast Producer Job ID: 14+
+Thu Apr 10 20:58:54 -0500 2008 -- Using workflow bundle:+
+/System/Library/PodcastProducer/Workflows/Blog and iTunes with+
intro.pwf
+Thu Apr 10 20:58:54 -0500 2008 -- Assembling Metadata for recording:+
458D24C4-DFD0-48CD-BDE2-0A3E1530502F
+Thu Apr 10 20:58:54 -0500 2008 -- Processing:+
/Podcasts/Recordings/458D24C4-DFD0-48CD-BDE2-0A3E1530502F/user_metadata.plist
+Thu Apr 10 20:58:59 -0500 2008 -- Processing Podcast Producer Job ID: 14+
+Thu Apr 10 20:58:59 -0500 2008 -- Using wor+
Using the xGrid admin I can see the agent available but none job is listed. Can anyone help me pls?

Officially, Podcast Producer only supports Intel-based agents. On a PowerPC based Xserve, the agent ranking will be zero, and podcast producer jobs will not run.
Some people have modified the workflows to ignore the ranking, but there are no guarantees the workflows will run correctly if that's done.

I just upgraded to the New OS on my Mac Book Pro and now my trackpad does not zoom in or out. I looked at system settings on trackpad and it is set, but does not work How do I get it started?

I just upgraded to the New OS on my Mac Book Pro and now my trackpad does not zoom in or out. I looked at system settings on trackpad and it is set, but does not work How do I get it started?

This is really unfortunate. I'm sorry that nothing works. I was going to mention holding down the power button and doing a force shutdown but you already did that. You might need to take it into the Apple store. I don't know if booting into safe mode would help. You would have to turn off the machine again, hit the start button and hold down the shift key after you hear the tone, but normally you would let go of the shift key when you see the apple logo and spining wheel. Maybe by holding down the shift key after you here the tone will cause the screen to come back on? The other option is to start up from the 'install disk' if your machine came with one. You would insert the disk, then shut down the computer, and hold down the C key right after hitting the start button.
Here's the link for the safeboot
http://support.apple.com/kb/HT1564?viewlocale=nl_nl

Home Page setting option is not working. Home Page always reverts back to Modzilla Firefox Start Page.

Home Page setting option is not working after saving a new or different home page on Firefox 19.0. When opening a new page (not tab) it always reverts back to the default "Modzilla Firefox Start Page" no matter what.

That was it! There was a duplicate preference file in the profile folder. Followed the instructions under "Locked Preferences File" to
6. Delete any prefs-n.js files where n is a number (e.g. prefs-2.js).
Once I deleted it I was able to then save my preferred home page.
Thanks!!

TS3406 Everytime is restart or update my iPhone 5s it stops making calls, i tried the air plain mode toggle & to reset thenetwork setting, it's not working !! What should i do ??

Everytime is restart or update my iPhone 5s it stops making calls, i tried the air plain mode toggle & to reset thenetwork setting, it's not working !! What should i do ??

If it has been officially unlocked, it will stay unlocked after an update:
iPhone: About unlocking

CS3 asked serial number suddenly and the box-set serial number not work.

CS3 asked serial number suddenly, and the box-set serial number not work.

Elton Adobe which web browser are you utilizing? Are you signed into http://www.adobe.com/ when you attempt to contact our support team directly at Contact Customer Care.
I would recommend utilizing a different web browser and contacting our support team directly as suggested by KGlad in message #6.

After upgrade to photos not able to import photos from my kodak M883 camera - says not correct format - still jpeg - worked before update - help!

After upgrade to photos am not able to import photos from my Kodak M883 camera. Program says not correct format - camera files are still jpeg - had no trouble importing before upgrade - Help!

Same thing is happening with me. IPhoto will not import .jpg from my Kodak! It used to all the time. Now it gives me an error msg saying .jpg is in the wrong file format. Can someone help?
Steve

Debugging is not working in R/3 from WebDynpro-ABAP developed webpage input

Dear Friends,
We are facing a serious problem for debugging. Expecting valuable input for the same.
Debugging is not working in R/3 from WebDynpro-ABAP developed webpage input in Production Server.
The debugging (for WebDynpro-ABAP application) is working in Dev. Server for
1st ] Within R/3
Ex. debug for bapi within R/3. i.e. value enter as input in R/3 only.
2nd ] From webpage to R/3
Ex. Some input given on the internet web page developed through WebDynpro and external breakpoint set in R/3 it works. It directs to R/3 code through debugging.
In Prod. Server the 1st case above is working but the 2nd case is not working.
In Prod. Server the WebDynpro developed applications are running successfully through internet explorer webpage inputs. So running the application is not a problem in prod. Server but debugging of the same is the problem.
The setting which are done in Prod. server are,
1] RZ10 in parameters are set for port and host name.
2.1] In SMICM check for ICM.
2.2] Host file updated in Windows-System 32.
3] In SICF following services are active,
3.1] default_host/sap/bc/webdynpro
3.2] default_host/sap/public/bc
3.3] default_host/sap/public/bc/webdynpro/viewdesigner
3.4] default_host/sap/bc/wdvd
3.5] default_host/sap/public/icman
3.6] default_host/sap/bc/gui/sap/its/webgui
3.7] default_host/sap/public/ping
3.8] default_host/sap/bc/error
3.9] default_host/sap/bc/echo
4] In SE80
4.1] Internet services-System-are published
4.2] Internet services-WEBGUI-are published
4.3] Utilities-Setting-ABAP Editor-Debugging-Username & New Debugger set.
4.4] Utilities-Setting-ABAP Editor-Editor-Front-End Editor(New) set.
5] In Su01 for user profiles sap_all & sap_new is assigned and role SAP_BC_WEBSERVICE_DEBUGGER is assigned.
6] The support packages are also updated to latest level.
7] Gone through following links but not getting any clues.
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/48/74d50bd1431b5ae10000000a42189c/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/EN/77/3545415ea6f523e10000000a155106/frameset.htm
Thanks in Advance.
Best Regards,
Abhijit.

No cross posting
Read the "Rules of Engagament"
Regards
Juan

Transferred CS4 to new MacBook Pro, now some fonts will not work when PDFing documents from InDesign CS4. Help!

I recently purchased a new MacBook Pro. I transferred my CS4 from my older MacBook Pro to my new computer, and although it seemed to be working fine now some fonts will not work when PDFing documents from InDesign CS4. These fonts are installed on my new computer, can be found in InDesign CS4, and work fine within the program but will not appear in PDFs. The letters turn into rectangles. Does anyone know why, and how to fix that?
Help/input would be much appreciated. Thank you!
Kristen.

you should properly install adobe products, not move, migrate or otherwise transfer them.
Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 12 | 11, 10 | 9, 8, 7
Photoshop Elements: 12 | 11, 10 | 9,8,7
Lightroom: 5.5 (win), 5.5 (mac) | 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

After installing any version of itunes. Told failed to install properly and could not burn or import music from Cd's. Also will not allow eithre one of my 2 ipods to sync with it as well.

After installing any version of itunes. Told failed to install properly and could not burn or import music from Cd's. Also will not allow eithre one of my 2 ipods to sync with it as well.

Could you post your diagnostics for us please?
In iTunes, go "Help > Run Diagnostics". Uncheck the boxes other than DVD/CD tests, as per the following screenshot:
... and click "Next".
When you get through to the final screen:
... click the "Copy to Clipboard" button and paste the diagnostics into a reply here. (Use your Ctrl-V keyboard shortcut to paste.)

Lightroom will not let me import photos from either camera or desktop. I can see them in the preview part of Lightroom but when I click import, just says they can't be read. HELP!

Lightroom will not let me import photos from either my camera or my desktop. They show up in the preview bit of Lightroom and I select the ones i want to import, then add my metadata info etc and file handling, but then when I hit IMPORT just keeps saying they can't be read. SO FRUSTRATING.

F. McLion wrote:
You are copying the photos. Does LR have the permission to delete the files from its source location - as DdeGannes suggested? Maybe this dialog is misleading.
Did you try to just add files copied to the destination before - just for finding the issue?
If nothing helps: Any chance you can upload one of the jpg to some file sharing service so we can have look at it?
I believe DdeGannes suggested permission on the Destination folder (not the source folder). Performing a copy requires only Read&Write permission on the destination folder, not the source folder. You need to go into your operating system and change the permissions to Read&Write on the destination folder. (If you don't know how to do that, go to your favorite search engine and type in Change Permissions Mac)

After i update my mobile sim card its not working i got message from apple to change the sim card and i cant change it please i want fix the problem

after i update my mobile sim card its not working i got message from apple to change the sim card and i cant change it please i want fix the problem

Yes, the message is self-explanatory. You need a carrier who supports Apple's activation policy for an iPhone.
iPhone: Wireless carrier support and features - Support - Apple

Automatic approval workflow does not work anymore

Hi,
Our automatic approval workflows configured via standard business configuration sets (process controlled) do not work anymore. They did work previously.
After changing the BUS objects 'automatic approval' workflow into the 1-step manager approval workflow it does work.
- The 'automatic approval' workflow does not seem to generate a workitem, the bbp_pd 'workflow' part is empty. In addition previously approved documents via 'automatic approval' do not contain workitem details via bbp_pd either anymore.
- We applied a new SP (SP07) not that long ago.
- These documents go into status: 'awaiting approval', the documents 'approval' details tell us the following:
001 Automatic Approval Valid (Can be Started) Open (No Decision Made) SYSTEM system
However the system does not execute the task, how come? What normally ensures the system executes these 'automatic approval' tasks (report?)?
Any input is very much appreciated.
Kind regards,
Tim

Hi Balaji,
In SRM 7.0,
Our automatic approval workflows configured via standard business configuration sets (process controlled) do not work anymore. They did work previously.
- The 'automatic approval' workflow does not seem to generate a workitem, the bbp_pd 'workflow' part is empty. In addition previously approved documents via 'automatic approval' do not contain workitem details via bbp_pd either anymore.
- - These documents go into status: 'awaiting approval', the documents 'approval' details tell us the following:
001 Automatic Approval Valid (Can be Started) Open (No Decision Made) SYSTEM system
However the system does not execute the task, how come? What normally ensures the system executes these 'automatic approval' tasks (report?)?
Any input is very much appreciated.
Regards,
Shears

Setting Workflow status not working in imported workflow from SPD to Visual Studio

Similar Messages

Maybe you are looking for