Settlemenent to an INternal Order

Hello Gurus
please help me in this issue.
What is the settings that need to be made to settle an internal order to another internal order.
Tcodes please?
Mnay thanks
MSJ

Hi,
If u create u r order as statistical ie.not a real order, then whenever u post a transaction with a cost element, u need assign a real cost object say cost center. U also assign this order, there by actual posting will posted.
Regards
Sudhakar Reddy

Similar Messages

Open Items in GR/IR Account Internal Order wise

Hi,
Is it possible to view Open Items in GR/IR Account Internal Order wise?. We are assigning Internal Order in Goods Receipt and want to view Open items for the particular Order.
Regards,
Amanullah

Thanks for your response.
I already review the accounting and is pretty fine.
The system creates document type WE and RE for the Goods Receipt and Invoice Receipt.
Unfortunately in transaction FBLN the system shows as a Open Item, and honestly I don't know the reason.
I really appreciate any help for this issue.
Regards.

Problem in creation of Internal Order

Dear Experts,
We've configured Asset Accounting in Development server for our newly implemented Company but the problem is when I'm going to create Internal Order (T-code: KO01) our company not showing there. Fyki, we've three CO area like MGH0, MGHI and MGHP but when I'm going to KO01 it is showing only those companies which are under MGHI only.
Would you please advise us, whether I left any configuration or not. Please also let me know how can I solve this issue.
Thanks in advance and your suggestion will be highly appreciated.
Best Regards.
Ripon Paul

Dear Both,
Thank you very much. Yes I found my problem.
Best Regards.
Ripon Kumar Paul

Purchase order to Asset non imposed the Internal Order.

I'm entering a purchase order of an asset tied to an internal order of investment. The order has a budget X. If I enter a purchase order with value greater than the amount budgeted in the internal order, the system allows me to create the request and not imposed the internal order. In the report S_ALR_87013019, the order has no value released.
How can the system do not allow the purchase of assets with values greater than estimated and how to make that encumbers the purchase order and appear in the report S_ALR_87013019?
This only happens in the purchases of assets!
Thanks in advanced!
GLMacedo

My friend, see my answer to witch point.
1. Your Asset APC account should be Category 90 (Statistical) Cost element
The Internal Order is Statistical (I see in KO03). Should I verify in another place?
2. your Internal Order must be of category "Investment" and not "Overhead"
OK
3. Assign this Internal order in your Asset Master in the field "Investment Order"and not "Internal Order"....
OK
if Investment Order is not visible in Asset Master, change your screen layout of the asset and plug it in (IMG > AA > Master Data > Screen layouts)
4. Do settings in T code ACSET - Allow EAUFN for Trn Type = *, Acct Assign Type = APC Postings, and check the Acct Assgn check box
I don´t know how can I do this. How Can I Do?
Allow commitment management in your contr area OKKP and in your Internal order type (KOT2_OPA)
My type Order (investment) in KOT2_OPA is OK (commitment management was allowed). But in OKKP it is not! It is a critical setting. Should I flag this field?
6. Feield Status Group of Asset must allow CO/PP Order in OBC4
OK
Thank you very much!

SAP Report to track cost by Internal Order

Hi Expert,
for audit purpose, I want to track the Cost by Internal Order, please suggest me in sap have any report to track down?
below format is an example.
release code cost center internal order number PR number PO number SES number vendor name desc of item cost of item
Thanks.

Hi Pal,
Many Thanks for your input, as per your recommendation
Mani as you suggested ME2K was working fine, but anyway we need to drill down further to double of each field.
As Nico suggested building a query, to view all at a same time is good & perfect to use.
So please suggest me, what are the tables and fields map to build a query? because Itu2019s very easy for me to assign fast.
Regards,

Including down payment made to vendor in the internal order

Hi all
My requirement is like this.
We use IM and IO(Capex orders) for procuring and capitalising assets. We are able to assign all the costs of procuring assets (both APC and incidental expenses to the internal order). We use purchase orders and assign the internal order while raising purchase order.
Sometimes we do make Down payments(advances) without raising purchase orders. My question is how to include this down payment made in the internal order. We cannot assign any internal order while making the down payment. But, can we include this down payment made to vendor in the internal order(commitment) while making down payment or after that.
FYI:I came to know that there is some functionality in Controlling (Project systems) where we can assign the down payment made to the internal order after making payment.But, i do not know how to do that.
Pls somebody reply me.
Thank you very much in advance.
Regards,
Vishnu
VST-IT.
Pls somebody answer my query.

The functionality is available in Controlling. I dont know about PS.
I need to know how to do it.
Regards
vishnu
Pls anybody suggest me on this issue.

Vendor line item display with internal order

In Vendor line item display is it possibe to see details of the line item of offsetting account .
For example a expense account is debited & vendor account is credited .At the time expense account debit a internal order has been assigned in line item.
User wants to see the vendor line item display ( T code FBL1N) with details of internal order appearing in open line items display etc .
Is this possible .I created a layout with order as a field but order does not show any values in the line display of vendor.
Please revert back if this can be possibe.
Thanks
Manoj

with a combination of notes
112312 - Line item - Display of offsetting ac information
373268 - Line item - new display field
569939 - Line item - Open FI - Absolute amounts
1034354 - FAGLL03 - Display of offsetting account information
you should be able to get it there.

Vendor invoices to internal order

Hi Experts,
Create Asset Under Construction using asset class for AUC .
Create Vendor invoices to Internal Order (not to asset account) F-90
How can i create the vendor invoice to internal order..please send the transacction code and procedure ..with one example.
this is urgent ..
Regards
msr

Dear,
in F-90 only you can post the asset aquisition.
You should do it in F-43.
Before doing invoice for AUC - please check the GL account assign for AUC.where check the field status group internal order field it should be optional/required.......
After that go for F-43 ther you can find a internal order field as
Order
Don,t forget to assign points,if it helps you.
Rgds,
Madhuri

A report for 'Responsible CCtr' and 'Requesting CCtr' in Internal Orders

Hi All,
displaing the master data of an Internal Order, in the tab 'assignment' I can see the fields 'Responsible CCtr'
and 'Requesting CCtr'.
I wonder, is ther a report in which these field are recalled?
Thanks

Hi,
T-code KOK5.
Define a sel. variant, run KOK4 with this variant to create an order group, view this order group in KOK5 and in the layout choose the fields you need.
best regards, Christian

Production Order and Internal Order for each item of the sales order

Hi
   I am developing Make To Order Report where I have to display the MTO Line Items and non MTO Line Items. For non MTO Line Items I have to display Internal order with Planned and Actual Costs and also Production Order with Planned and Actual Costs. Could anybody tell how to get the Internal order no and production order with Planned and Actual costs for each line item for a sales order.
Thanks
Naga

Hi,
You can get the Production orders, Planned orders, Internal orders generated for Sales order item from AFPO table (use fields KDAUF-Sales order number & KDPOS-Sales order item). Then to identify the order type use order category (AUTYP) from table AUFK.
Once you have the Production/internal order, you can ge the cost from COSS and COSP table. Use the object number from AUFK to get the cost entries from COSS & COSP.
You can use the following sample code as reference.
Hope this is helps.. (Don't forget to mark it... )
Form GET_COSTS                                                       *
Get the material cost, labour hours and the labour cost for the      *
sales order material.                                                *
There are no interface parameters to be passed to this subroutine.   *
FORM GET_COSTS.
DATA V_OBJNR LIKE AUFK-OBJNR.
DATA v_menge LIKE vbap-kwmeng.
SELECT SINGLE OBJNR
    INTO V_OBJNR
    FROM AUFK
   WHERE AUFNR EQ AFPO-AUFNR.
SELECT * FROM COSS
   WHERE OBJNR EQ V_OBJNR
     AND WRTTP IN ('01', '04'). " p_wrttp. "Labour Cost ( Plan, Actual)
    PERFORM GET_VALUES_FROM_COSS.
ENDSELECT.
SELECT * FROM COSP
   WHERE OBJNR EQ V_OBJNR
     AND WRTTP IN ('01', '04')         " p_wrttp
     AND KSTAR NE '0000510033'. " EQ p_kstar2.      "Material Cost
    PERFORM GET_VALUE_FROM_COSP.
ENDSELECT.
Get the unit cost of the production order by dividing the production
cost by the order quantity. The result will be multiplied by the
GL posting qunatity (Delivery quantity) to get the production cost
for the quantity being deluivered.
IF NOT AFPO-PSMNG IS INITIAL.
    OUT_REC-LABOUR_HOURS_ACT = OUT_REC-LABOUR_HOURS_ACT / AFPO-PSMNG.
    OUT_REC-ADDNL_LABOUR_HOURS_ACT =
                      OUT_REC-ADDNL_LABOUR_HOURS_ACT / AFPO-PSMNG.
    OUT_REC-LABOUR_HOURS_PLN = OUT_REC-LABOUR_HOURS_PLN / AFPO-PSMNG.
    OUT_REC-ADDNL_LABOUR_HOURS_PLN =
                     OUT_REC-ADDNL_LABOUR_HOURS_PLN / AFPO-PSMNG.
    OUT_REC-LABOUR_COST_ACT = OUT_REC-LABOUR_COST_ACT / AFPO-PSMNG.
    OUT_REC-ADDNL_LABOUR_COST_ACT =
                     OUT_REC-ADDNL_LABOUR_COST_ACT / AFPO-PSMNG.
    OUT_REC-LABOUR_COST_PLN = OUT_REC-LABOUR_COST_PLN / AFPO-PSMNG.
    OUT_REC-ADDNL_LABOUR_COST_PLN =
                     OUT_REC-ADDNL_LABOUR_COST_PLN / AFPO-PSMNG.
    OUT_REC-MATERIAL_COST_ACT = OUT_REC-MATERIAL_COST_ACT / AFPO-PSMNG.
    OUT_REC-ADDNL_MATERIAL_COST_ACT =
                     OUT_REC-ADDNL_MATERIAL_COST_ACT / AFPO-PSMNG.
    OUT_REC-MATERIAL_COST_PLN = OUT_REC-MATERIAL_COST_PLN / AFPO-PSMNG.
    OUT_REC-ADDNL_MATERIAL_COST_PLN =
                     OUT_REC-ADDNL_MATERIAL_COST_PLN / AFPO-PSMNG.
ENDIF.
Multiply the calculated Unit Production costs with the GL quantity to
get the actual production cost of the quantity delivered.
Calculation for Labour Hours
OUT_REC-LABOUR_HOURS_ACT = OUT_REC-LABOUR_HOURS_ACT *
                             OUT_REC-QUANTITY.
OUT_REC-ADDNL_LABOUR_HOURS_ACT = OUT_REC-ADDNL_LABOUR_HOURS_ACT *
                             OUT_REC-QUANTITY.
OUT_REC-LABOUR_HOURS_PLN = OUT_REC-LABOUR_HOURS_PLN *
                             OUT_REC-QUANTITY.
OUT_REC-ADDNL_LABOUR_HOURS_PLN = OUT_REC-ADDNL_LABOUR_HOURS_PLN *
                             OUT_REC-QUANTITY.
Calculation for Material Cost
OUT_REC-MATERIAL_COST_ACT = OUT_REC-MATERIAL_COST_ACT *
                              OUT_REC-QUANTITY.
OUT_REC-ADDNL_MATERIAL_COST_ACT =
      OUT_REC-ADDNL_MATERIAL_COST_ACT * OUT_REC-QUANTITY.
OUT_REC-MATERIAL_COST_PLN = OUT_REC-MATERIAL_COST_PLN *
                              OUT_REC-QUANTITY.
OUT_REC-ADDNL_MATERIAL_COST_PLN =
      OUT_REC-ADDNL_MATERIAL_COST_PLN * OUT_REC-QUANTITY.
Calculation for Labour cost
OUT_REC-LABOUR_COST_ACT   = OUT_REC-LABOUR_COST_ACT *
                               OUT_REC-QUANTITY.
OUT_REC-ADDNL_LABOUR_COST_ACT = OUT_REC-ADDNL_LABOUR_COST_ACT *
                              OUT_REC-QUANTITY.
OUT_REC-LABOUR_COST_PLN   = OUT_REC-LABOUR_COST_PLN *
                              OUT_REC-QUANTITY.
OUT_REC-ADDNL_LABOUR_COST_PLN = OUT_REC-ADDNL_LABOUR_COST_PLN *
                              OUT_REC-QUANTITY.
Get the planned material cost from the total of the planned cost of
the component materials in the production order confirmations.
SELECT BWART MENGE MATNR SHKZG FROM AUFM
    INTO (AUFM-BWART, AUFM-MENGE, AUFM-MATNR, AUFM-SHKZG)
   WHERE AUFNR EQ AFPO-AUFNR.
    CHECK AUFM-BWART NE '101'.
    READ TABLE I_MBEW WITH KEY MATNR = AUFM-MATNR
                               BWKEY = AFPO-DWERK.
    IF SY-SUBRC NE 0.
      SELECT MATNR BWKEY ZPLPR LPLPR PEINH
        FROM MBEW
        INTO I_MBEW
       WHERE MATNR EQ AUFM-MATNR
         AND BWKEY EQ AFPO-DWERK.
        APPEND I_MBEW.
      ENDSELECT.
    ENDIF.
    IF SY-SUBRC EQ 0.
      IF I_MBEW-ZPLPR NE 0.
        IF AUFM-SHKZG EQ 'H'.
          OUT_REC-PLANNED_MATERIAL_COST =
          OUT_REC-PLANNED_MATERIAL_COST +
                       ( I_MBEW-ZPLPR * AUFM-MENGE / I_MBEW-PEINH ).
        ELSE.
          OUT_REC-PLANNED_MATERIAL_COST =
          OUT_REC-PLANNED_MATERIAL_COST -
                       ( I_MBEW-ZPLPR * AUFM-MENGE / I_MBEW-PEINH ).
        ENDIF.
      ELSEIF I_MBEW-LPLPR NE 0.
        IF AUFM-SHKZG EQ 'H'.
          OUT_REC-CURRENT_MATERIAL_COST =
          OUT_REC-CURRENT_MATERIAL_COST +
                       ( I_MBEW-LPLPR * AUFM-MENGE / I_MBEW-PEINH ).
        ELSE.
          OUT_REC-CURRENT_MATERIAL_COST =
          OUT_REC-CURRENT_MATERIAL_COST -
                       ( I_MBEW-LPLPR * AUFM-MENGE / I_MBEW-PEINH ).
        ENDIF.
      ENDIF.
    ENDIF.
ENDSELECT.
Get the Future material cost per Unit by deviding the calculated
Future material cost above with the goods reciept quantity to, then
multiply the unit cost with the GL quantity to get the Future material
Cost for the Quantity delivered. (Quantity in the entery from GLPCA
Table).
IF NOT AFPO-WEMNG IS INITIAL.
    OUT_REC-PLANNED_MATERIAL_COST =
       OUT_REC-PLANNED_MATERIAL_COST / AFPO-WEMNG * OUT_REC-QUANTITY.
    OUT_REC-CURRENT_MATERIAL_COST =
       OUT_REC-CURRENT_MATERIAL_COST / AFPO-WEMNG * OUT_REC-QUANTITY.
ENDIF.
ENDFORM.                               " GET_COSTS
Form GET_VALUE_FROM_COSP                                             *
Get the Material cost from COSP table.                               *
There are no interface parameters to be passed to this subroutine.   *
FORM GET_VALUE_FROM_COSP.
FIELD-SYMBOLS: <FS> TYPE ANY.
DATA: V_COMPONENT TYPE I.
Cummulate the posting values of all the 16 period buckets as to get
total production order cost. This is to handle the aprtial posting of
prodction order values in diffrent periods.
V_COMPONENT = 15.
DO 16 TIMES.
    ADD 1 TO V_COMPONENT.
    ASSIGN COMPONENT V_COMPONENT OF STRUCTURE COSP TO <FS>.
    IF COSP-WRTTP EQ '04' AND COSP-KSTAR EQ P_KSTAR2.
      ADD <FS> TO OUT_REC-MATERIAL_COST_ACT.
    ELSEIF COSP-WRTTP EQ '04'.
      ADD <FS> TO OUT_REC-ADDNL_MATERIAL_COST_ACT.
    ELSEIF COSP-WRTTP EQ '01' AND COSP-KSTAR EQ P_KSTAR2.
      ADD <FS> TO OUT_REC-MATERIAL_COST_PLN.
    ELSEIF COSP-WRTTP EQ '01'.
      ADD <FS> TO OUT_REC-ADDNL_MATERIAL_COST_PLN.
    ENDIF.
ENDDO.
ENDFORM.                               " GET_VALUE_FROM_COSP
Form GET_VALUES_FROM_COSS                                            *
Get the Labour cost and Labour hours from the COSS table.            *
There are no interface parameters to be passed to this subroutine.   *
FORM GET_VALUES_FROM_COSS.
FIELD-SYMBOLS: <FS1> TYPE ANY,
                 <FS2> TYPE ANY.
DATA: V_COMPONENT1 TYPE I,
        V_COMPONENT2 TYPE I.
Cummulate the posting values of all the 16 period buckets as to get
total production order cost. This is to handle the aprtial posting of
prodction order values in diffrent periods.
V_COMPONENT1 = 15.
V_COMPONENT2 = 111.
DO 16 TIMES.
    ADD 1 TO: V_COMPONENT1, V_COMPONENT2.
    ASSIGN COMPONENT V_COMPONENT1 OF STRUCTURE COSS TO <FS1>.
    ASSIGN COMPONENT V_COMPONENT2 OF STRUCTURE COSS TO <FS2>.
    IF COSS-WRTTP EQ '04' AND COSS-KSTAR EQ P_KSTAR1.
      ADD <FS1> TO OUT_REC-LABOUR_COST_ACT.
      ADD <FS2> TO OUT_REC-LABOUR_HOURS_ACT.
    ELSEIF COSS-WRTTP EQ '04'.
      ADD <FS1> TO OUT_REC-ADDNL_LABOUR_COST_ACT.
      ADD <FS2> TO OUT_REC-ADDNL_LABOUR_HOURS_ACT.
    ELSEIF COSS-WRTTP EQ '01' AND COSS-KSTAR EQ P_KSTAR1.
      ADD <FS1> TO OUT_REC-LABOUR_COST_PLN.
      ADD <FS2> TO OUT_REC-LABOUR_HOURS_PLN.
    ELSEIF COSS-WRTTP EQ '01'.
      ADD <FS1> TO OUT_REC-ADDNL_LABOUR_COST_PLN.
      ADD <FS2> TO OUT_REC-ADDNL_LABOUR_HOURS_PLN.
    ENDIF.
ENDDO.
ENDFORM.                               " GET_VALUES_FROM_COSS

Standard report for settled internal orders

Hi All,
Is there any standard report available in Asset for settled internal orders.
We can able to see in S_ALR_87013019. But all Internal orders are appearing. I am not able to see settled orders. How to identify those... (Like flag color difference should be required for settled and open).
Thanx in advance.
Regs,
Bhaskar

Hi All,
Is there any standard report available in Asset for settled internal orders.
We can able to see in S_ALR_87013019. But all Internal orders are appearing. I am not able to see settled orders. How to identify those... (Like flag color difference should be required for settled and open).
Thanx in advance.
Regs,
Bhaskar

Any standard report on INTERNAL ORDERS:Overview

Hi Experts,
Report I need to develop INTERNAL ORDERS:Overview with Following requirement: R u talking about this, Can u help me out with this? Do u know <b>if there is any standard report</b> as well..Many thanks1
Report Layout
Sample Layout 1
Rows
Total Direct Expenses\Total Labor Expenses
Internal Order Number
G\L Account (Cost Element)
Columns
Month (1 through 12 months)
Actual Posting
Sample Layout 2
Rows
Total Direct Expenses\Total Labor Expenses
Internal Order Number
G\L Account (Cost Element)
Columns
Projected
Annual Total
Month (1 through 12 months)
Commitments
Sample Layout 3
Rows
Cost Center Expense
Cost Centers
Internal Order Expense
Internal Orders
Columns
Month (1 though 12 months)
Actual Postings
Note
Division between Direct and Labor expenses is defined by cost element range. The definition is query based rather than InfoCube or ODS object based.
Report Fields
[Please provide the fields and their descriptions in the report layout]
Field Name--Description-Data Element-- Info Source
Company-- Code Company Code --SAP ECC
Cost Element (G\L Account)--- Cost Element SAP ECC
Cost Center --Cost Center Number SAP ECC
Internal Order --Internal Order Number SAP ECC
Order Group --Internal Order Group SAP ECC
Cost Center Group --Cost Center Group SAP ECC
Cost Element Group--- Cost Element Group SAP ECC
Fiscal Year --Fiscal Year (same as calendar year) SAP ECC
Month ---Month (same as fiscal period) SAP ECC
Version (plan\actual\commitment) --Internal Order version SAP ECC
Plan Version SAP ECC
Amount Total Postings SAP ECC
<b>How to do 3 different Layouts, is it 3 different reports or the user needs drag&drop watever is required for him... </b>

You can have 3 queries embedded into a single workbook.
May be you can also provide with all the query elements needed ( Structures, RKF, CKF )...so users can create on their own ( Query Writers ).
You can searh Help.SAP for Buss Content queries, change em accordingly...
First search if the datatargets provide you all information...

Segment derivation when posting invoice on internal order

Dear colleagues,
I have configured the New General Ledger in SAP ECC 5.0, with profit center and segment as splitting characteristics. Document splitting and segment derivation are working fine for almost all scenarios, but not for all scenarios.
When a post a vendor invoice with FB60 to only a cost center document splitting and segment derivation are working correctly: the segment is derived from the profit center (which is assigned to the cost center in the master data of the cost center) and I can post the invoice.
However, when I post the vendor invoice to both a cost center and an internal order segment derivation does not work: I get the error message GLT2201 "The field Segment marked as balancing is not filled with any value in line item 001, even after document splitting."
The reason for this is that the posting on the cost center becomes statistical and the posting on the internal order is the actual posting. In the master data of the internal order I have not defined a profit center. Because of this the DUMMY profit center is assigned to the line item.
I have assigned all profit centers to a segment (in the profit center master data), except for the DUMMY profit center. I guess this is correct?? I can easily solve this issue by assigning the dummy profit center to some kind of dummy segment, but I don't think this is the correct solution.
A solution might be to enter a profit center in the master data of the internal order (segment can then be derived from this profit center). However, I prefer not to put a profit center in the master data of the internal order.
Does any of you have experience the same kind of problem? Can anybody give me some advice how to derive the segment correctly in the aboven mentioned posting? Did I do something wrong in the customizing?
Thanks for your help in advance!
Regards,
Koert

I have already found the solution myself. In the customizing you can define a default segment that will be used in case no segment can be derived in the posting.
IMG: Financial Accounting (New) --> General Ledger Accounting (New) --> Business Transactions --> Document Splitting --> Edit constants for nonassigned processes
Regards,
Koert

Actual and Commitments values are not Appearing in Internal order report

Hi
We have done budget in KO22 for Internal Order and active the availability controle after that we made PO with the same IO and with account assignment category 'A' and GR also happened.
So when we run the report (S_ALR_87013019 - List: Budget/Actual/Commitments ), system is not showing Actual and Commitments values...
Please help me in this regard...
Thanks,
Saisri

Hi,
Here we are giving internal order in PO with account assignment category 'A'
In case of Account assignment category 'K' it is showing the Actual values in Report.
Why is it showing Actal /commitment values incase of 'K' ?
Why it is not showing when we select the 'A' category ?
Please provide me answer about my queries...plz
Thanks,
Saisri

Internal order - any program to reconstruct actual and commitment figures?

If internal order is activated later, is there any program that can update the IO actuals/commitments based on PR / PO / FI documents which are assigned to the respective IO?
I think for commitments, the program is RKANBU01, correct? How about actuals from goods/invoice receipts or FI docs?
Thanks

for commitment values the report is RKANBU01 (see note 152571 for reference)
For document transfer from FI to CO you can use transaction OKBA
You can also check notes 45122 and 98520 explaining how to
post FI doc.subsequently w/o acct assgnmnt to CO
hope this will help you

Settlemenent to an INternal Order

Similar Messages

Maybe you are looking for