Settlement rule for several assets but one internal order number

Hi,
I have a question regarding the settlement rule for an internal order. I have issued an internal order number to capture costs for a construction project.  When the project is completed how do I update the settlement rule for the internal order to several assets all for different amounts?
For example an internal order number has collected costs of 150,000.00 for the completion of a building.  When the building is complete and I want to do a final settlement of the internal order.  I have one asset for land improvements for 43,000, another asset for the HVAC system for 33,000 and building costs of 74,000.  When updating the settlement rule I know to create the assets and update the settlement rule with these asset numbers, but I am unclear on how to assign multiple assets with differnt amounts.

Hi ,
In the settlement rule , you need to select the Receiver as FXA and then enter the Asset number and then you will have to put the % that you want to settle to .
Like if you have 100/- Rs. total cost and you want to settle it to 2 assets in 60/- Rs. and 40/- Rs.
Then you will have to enter 2 line items in settlement rule with diffrent asset numbers and in proportion you will have to say 40 % and 60% , based on which the final settlement would happen .
So make the proportion changes in the settlement rule accordingly .
Regards ,
Dewang T

Similar Messages

  • Creating a settlement Rule for an Asset: message error AA311

    Hi All,
    I have to create e Settlement Rule by KO02. But SAP gives me the message AA311 and doesn't allow me to go on...
    Could anyone help me?
    Thanks

    hello Gandalf ,
    Create an IO Through KO01 with extra Create AUC........
    Then post the exp to AUC........
    Then assign the settlement rule as Fixed assed and enter the Asset number and give % or amount....
    Settle the IO through K088
    Hope this will resolve your issue............
    Regards
    Kumar

  • Error while attaching settlement rule for AuC asset

    Getting error "The share to be settled in rule 001 is not unique"  "Enter a unique number (001) (view: Actual settlement) "  when trying to attach a settlement receiver in transaction AIAB  - where to view the duplication of rules, and where to delete the rules ?

    Hello
    Check the transfer variant / receiving asset / transaction type.
    Check all rules again.
    Reg

  • Settlement rule for AUC

    Dear SAP gurus,
    In AIAB, I have assigned the settlement rule for AUC asset id. However I am not able to see the settlement rule assigned in  As03. Is there any report

    Hi,
    you can see the settlement rule only in AIAB.
    regards Bernhard
    Edited by: Bernhard Kirchner on Jun 15, 2010 12:52 PM

  • User-exit: Put internal order number to GL item when settlement

    Hi Experts,
    I have a requirement to develop user-exit for internal order settlement. The current status in in standard SAP function as below:
    When we settle an internal order then corresponding FI documents is generated at the same time. In the FI document there have two itmes, the <b>first item</b> is for GL account, and the field of bseg-aufnr is space. The <b>second item</b> is for ERG account, and the internal order number will fill into bsge-aufnr on this item.
    Now our requirement is below,
    I would like to fill the internal order number to <b>first item</b> also. Do we have the user-exit/enhancement/modifucation to meet this requirement?? Please kindly point me a direction. Thanks very much.

    Only one exit for it check
    Transaction Code - KO88                     Actual Settlement: Order
    Exit Name           Description
    COOM0003            Customer function for automatic creation of settlement rules
    No of Exits:          1
    Rewards if useful.....................
    Minal

  • Settlement Rule for Internal Order

    Hi All
    I have Maintained Settlement rule for Internal order as under
    CAT - FXA
    Settlement Receiver - Asset
    % - 100
    Settlement type - Full
    Now after settlement of above Order in KO88 . I want again use above internal order. Hence i have trying to put Settlement rule 50% for some anther asset but system gave me following error. Please guide on this issue.
    Total = 50.00%, ( Set.Type PER / Version / Actual settlement ), period 010/2011
    Message no. KD042
    Diagnosis
    You have entered distribution rules which settle 50.00% in total. This applies for settlement view ( Set.Type PER / Version / Actual settlement ) in period 010/2011.
    When checking the percentage total, the system found one of the following errors:
    The total percentage for the distribution rules is more than 100%
    The total percentage for the distribution rules is less than 100% and this is a rule for full settlement.
    The total percentage for the distribution rules is less than 100% and the 100% check is switched on in the settlement profile.

    Hi:
            Please refer to the contents of OSS Note 45612 - IM: pre-settlement does not work, or KD042... which states
    "Symptom
        1. If a preliminary settlement rule (for example, to cost center) is entered for individual items of capital investment measures with line item management, this rule is not considered during periodic settlement. There is no settlement to cost centers.
        2. If you enter a final settlement rule for individual line items of investment measures with line item management for a partial capitalization (that is, the percentage rate is less than 100%), then you receive the unjustified error message KD042 "Total percent = xx%".
    Additional key words
    KOB5, CJ70, CJ88, CJ8G, KO88, KO8G, preliminary settlement, partial settlement, partial capitalization
    Cause and prerequisites
        1. You did not enter the settlement type ACT in the preliminary settlement rule.
        You can check this in the Line Item Apportionment transaction by choosing the menu option "Goto" -> "Overview dist. rules" to display the distribution rule groups entered so far.
        The system displays rules which have no entry in the "SetTyp" field (settlement type, field name PERBZ).
        2. The check of the percentages is incorrect.
    Solution
        1. Install the following correction. Afterwards reverse the incorrect settlement, re-enter the preliminary settlement rule and settle again.
        2. Install the following correction. Afterwards, you can maintain the settlement rule for the partial settlement.
        Note: If you want to use a default settlement rule (maintaining the settlement rule from the master data maintenance transaction), then you are required to distribute the line items at 100%. In order to carry out a partial capitalization (settlement of less than 100%), you have to use menu path "Actual postings -> Period-end closing -> Settlement -> Line item "
    Regards

  • Plan settlement rules for internal orders

    Hi all,
            I am having a problem in setting up plan settlement rules for the internal orders. I have created a order and tried to set up a plan settlement rule. I am trying to settle the order to a Profitability segment PSG category. Everything is fine until here. Then when I am trying to change the profit center in the Profitability segment it is greyed out. I am unable to change it. This is not the case with actual settlement. In actual settlement you can change the profit center in the settlement rule but not in case of plan settlement. Can someone please help me in this. I need to change the profit center in the plan settlement rule. This is very urgent.
    Many thanks,
    Sarada

    Hi,
    Please check if it has any planned values already posted on this order already.  In this case, unless these values are settled it will not allow you to change the profit center.
    Also, the reason for the allowing a change of profit center in actual settlement rule might be that there are no actual values posted in the order.
    Good luck!!!
    Thanks and Regards,
    Bhuvaneswari.S

  • Settlement rule for Asset Under Construction not automatically generated.

    Hi Experts,
    I am working on a capital project scenario where in i configured the SAP IM and SAP PS module. i am able to create AUC at the WBS level on project release,but i am not able to generate the settlement rule for AUC automatically.
    Please suggest as to what i am missing to generate settlement rule for AUC automatically.
    Thanks,
    shiv

    i think for automatically AUC to be generated, u need to create investment profile in OITA in that u have to tick mange AUC in investment measure. & select settlement for summary settlement.
    This investment profile u need to specify in Project Profile OPSA.
    do this setting & let me know whts happen?
    ok best of luck.
    Regards,
    ANSAR

  • Settlement rule for order

    hi co guru sir....kindly guide me to maintain  settlement rule for production order. steps by steps..plz..
    problem is this when i create planned order to production order ..first  screen open for maintain settlement rule...i have maintained..but may be wrong...
    plz guide me for maintain the settlement rule........
    thanx
    regards
    Aqueel

    Hi,
    Settlement rule determines which portion of the costs on a sender should be settled to which receiver(s).
    You need to create a settlement rule to settle the actual costs of a sender object. The settlement rule contains the distribution rules for the sender.
    Structure: The settlement rule contains:
    - One or more distribution rules
    - The settlement parameters for a sender object.
    Creating a Settlement Rule:
    You previously had to maintain the settlement rule for internal orders manually. Now the system can automatically generate settlement rules for internal orders.
    Procedure:
    1) Choose Settlement rule in the master data maintenance for the relevant sender object.
    The Maintain Settlement Rules: Overview screen appears.
    If you stored a default for account assignments in the settlement profile then the system displays the existing distribution rules. The settlement receiver is the object type you stored as an account assignment default in the settlement profile.
    You maintain settlement rules in Customizing under Controlling -> Internal Orders -> Actual Postings -> Settlement -> Maintain Settlement Profiles.
    2) Choose Edit -> New rule or enter the value directly.
    Specify how the sender object costs are to be settled to the various settlement receivers:
    - By percentage
    - By equivalence numbers
    For distribution rules of the same settlement type (periodic or total) you need to determine the portion using either percentage rates or equivalence numbers.
    Specify the settlement type for each distribution rule.
    The system defaults the settlement type depending on the receiver, for example PER for cost center, FUL for fixed asset. You can overwrite the default value, if required. When you save the sender object, you automatically save the settlement rule.
    I hope it will help.
    If helpful, please assign points.
    Regards,
    Manju

  • Investment order settlement rule to many assets

    Hello experts,
    When I buy 200 similar assets in one-shot I create 200 assets with AS01 using the "number of similar assets" field.
    Now my question is: does a customizing point exist in order to assign automatically those 200 assets to the internal order for settlement ?
    Benoit

    Hello,
    Thanks for the answer, using this BAPI will I be able to define automatically a settlement rule in this way ?
    - The order has 1.000.000u20AC value
    - I created 100 assets
    - Automatically generate settlement rule with 100 lines and value = 10.000u20AC / asset
    The problem is the following: I buy approximately 6000 pumps a year by orders of approximately 200 pumps.
    Each pump is valuated 250u20AC in FI-AA.
    I create a purchase order of investment for 200 pumps and put the 50000u20AC on the internal order.
    Now I need to settle those 50.000u20AC to my 200 fixed assets.
    If this is possible what is the best way to achieve this ?
    Regards,
    Benoit

  • Automatic Generation of Settlement Rules for PM order

    Hi All,
    I am doing a maintenance orders settlement and I have the fallowing issue:
    My client has 2 types of equipment, namely vehicles and industrial equipment. Both have particular rules.
    For vehicles, we need to control all cost by an internal order
    Industrial equipment costs will be control by cost center.
    So, cost center is maintained for industrial equipment, and Settlement Order for vehicle equipment.
    I have a unique order type for which in Settlement profile I have entered Order and Cost Center as 'Settlement Optional' and default object type as CTR.
    When I create a PM order for vehicle, system cannot generate automatically the settlement rule, because in order type I have entered default object type as CTR and in equipment I just have the Settlement Order.
    But if I create a PM order for industrial equipment system create automatically the settlement rule, because cost center is maintained for industrial equipment and order type has default object type as CTR.
    In the allocation structure I have a receiver category for CTR and ORD.
    So, Could you help me how to generate automatically settlement rule for both cases without 2 order types?
    Thanks & regards,
    Hélder Nunes

    hi
    i think it is not possible to generate settlement rule based on equipment ,if you have specified the default settlement category in IMG ,it will be generated .
    check with your technical team whether user exit IWO10027 can be mapped
    regards
    thyagarajan

  • Create new settlement rule for an order with a function module

    Hi,
    I would like to create a settlement rule for an order. I searched for existing function modules and found K_ORDER_SETTLEMENT_RULE, which seems to be the correct one.
    The problem: The settlement rules, which I create with this function module are not saved.
    Do I have to call another function module to save my new rules?
    Thanks in advance,
    Fabian

    Hi,
    Settlement rules are first of all defined in customizing how the should be behave and secondly lies the question how to update a CO cost object with this settlement rule.
    My first advice would be to use the "automatic settlement derivation feature" that can be setup in customizing alike. <b>SPRO -> Controlling -> Internal Orders -> Actual Postings -> Settlement -> Automatic generation of Settlement Rule</b>. Read the docu for this node (right click and choose Display documentation) to understand what possibilities and limitations this functionality has. Below this node you have the possibility to define a "settlement strategy" and allocate this to a order type. You can also define a Enhamcement (COOM0003
    ) where you can somewhat influence the automatic generation of settlement rules.
    Execute transaction KO8G (collective processing) or KO88 (indicidual processing) to create a settlement rule for internal orders.
    The other option you have is to create a custom program based on BDC to create settlement rule for internal orders.
    I think the BDC program would be a better idea for you.
    Let me know if you have any question.
    Regards,
    RS

  • Settlement rule for sales document item

    Hi,
    while creating settlement rule for sales document item, it shows message
    Sales document item is not defined for the transaction,
    Message no. V1198
    Regards
    Gajendra

    Do not give links are your reply. This will be considered as link farming. A user has been removed from forum, because he used to this several times and he was one of the top contributor.
    Just suggest the user to search the forum, hope nobody needs a guide on how to search in a forum or google.

  • Only one internal order allowed for Cost center/GL combination  -validation

    Dear Friends,
    We are using internal orders for controlling department wise budgets.
    my client wants that he be able to post only through one GL account to one internal order
    that is for Marketing dept,(departments are created as cost centers)
    Canteen exp              internal order 1000
    Entertainment exp     internal order 1001
    Gift exp                     Internal order 1002
    that is when GL account canteen exp is used (for cost center 1000 (marketing)) then internal order 1000 can be used but if entertainment exp is to be booked  internal order 1000 cannot be used. in this case only internal order 1001 should be allowed
    We are using real internal order (settlement will happen at end of month)
    Can you let me know if this is possible in standard SAP or any workaround.
    Regards,

    Hi Sangharsh,
    If internal order must be filled in these GL then you can meet your requirement by creating the validation. To meet this requirement three steps are to be created in one validation. One step is created below to make you create two more steps by your self.
    Create validation under Financial Accounting Line Item using transaction GGB0.
    Step 1.
    Prerequisites. (Go to settings>Expert mode and fill following)
    BSEG-BUKRS = '1000' AND (here instead of 1000 you enter your company code)
    BSEG-HKONT = '450000'      (here instead of 450000 you enter GL for canteen expense)
    Check
    BSEG-AUFNR = '1000'
    Message
    Click on pencil icon and create below message or the message you want.
    Intenal Order 1000 is allowed for canteen expenses.
    Assign this validation to your company code using transaction OB28 with call up point 2.
    Similarly you can create two more steps. Thus your requirement can be met.
    Regards,
    Chintan Joshi.

  • Settlement rules for CO Orders

    Hi Guru, need your help to set up new settlement rules for CO Orders, to different plan versions. Can this be done in a massive way?

    Hi...
    Firstable, you have to create all plan version in the Controlling area, and activate the CO integration planning.
    You can create many settlement rules for each plan version but individually on the transaction KO02 -> Settlement Rule -> New rule...
    If you want to creat it automatically, maybe you can try to create a LSMW for this transaction. There are masive modification for other field to internal orders (Transactions KOK2 and KOK4)
    Regards,
    Karim

Maybe you are looking for