Setup and configuration for system monitoring and IT Reporting for Java sys

Hi all,
How to setup and configuration for system monitoring and IT Reporting for Java system ?
How to connect Java system to Solman system?
Regards,
Neni

HI,
What is your OS? You can use SAPCCMSR.exe to monitoring  IT Reporting Java system on Solman.
Go to solman rz21 create a csmreg user. and configuration fil for agent. copy configuration fil on usr/sap/ccms/..
Go to comman line cd ../user/sap/xxx/sys/exe/.../ wite SAPCCMSR.00 -R pf=< ...../sys/profile/instans profile> .
You can se agent on rz10 and use this connaction on rz20 to monitoring and IT Reporting Java system on Solman.
I hope this help

Similar Messages

  • RFC configuration for system monitoring / Early Watch reports

    Hello Basis Gurus:
    Please help me out.....
    The early watch reports in the solution manager of my system are failing consistently to execute.This is happening for all the 3 systems DEV,QAS,PRD.when i click on individual earlywatch reports it takes me to a screen which says  "data for this report is overdue.....go to your satellite system SDCCN to see why the data was not sent...."
    It says ...check the following things.....
    "The RFC connection for the SAP Solution Manager system is not working.
    The 'Task Processor' background job, which collects the session data, has been changed.
    Problems arose while data was being collected (see the detail log for the task that collects the session data).
    A periodic 'SDCC Maintenance Package' task has not been scheduled to check whether your SAP Solution Manager system requests session data."
    I can see the task processor job , and the periodic Maintenance package scheduled everyday and completed sucessfully.So is it the RFC which is causing the problem.
    Im SM59 of the solman, i can see system generated RFCs for the PRD,DEV,QAS and SND  (...3 for each of these systems...).
    say for PRD, these are the 3 RFCs.
    1.)SM_PRDCLNT<client#>_READ.
    2.)SM_PRDCLNT<client#>_TMW.
    3.)SM_PRDCLNT<client#>_TRUSTED.
    I am not sure which RFCs among the 3 for any given system does the solman use to communicate to the satellite systems.
    *The user id section in the Logon Data of any of these RFCs is blank.and the password says "is initial"...*is this correct.Does the user id have to be a communication type of user...
    PLeaase advise as to what could be going wrong..
    Regards.

    Hi,
    The system uses ABAP Connection (Connection Type 3) to connect to different Systems to execute Functional Calls.
    Now in your case, there are 3 different connections meaning your Basis Team has used 3 connections for different connection activities. This is totally a business dependent scenario.
    Now each time you create a RFC Connection, the system will need the following information to remotely call another system, they are:
    Host Details of Target System
    Logon Details to remotely login
    For RFC Connections the User Type has to be Communications User. But there are companies which use Dialog User Types as well to remotely login for some cases. When the User ID is created for an RFC User and a Password is assigned to it, this Password is considered as the Initial Password by the system. This Password is taken as the Initial Password in the RFC Connection as well.
    There can be cases where the system is Trusted and there is no need of a password, but an Username is mandatory in all cases. Remember if you set the system as Trusted, the password option gets deactivated and the connection wont work, if the system does not have the Trusted status.
    But in any case you must assign the Username alongwith the Client and Language Details in the RFC Connection for it to work.
    Hope this helps.
    /Manoj

  • Solution Managers System monitoring and CCMS/CEN

    Hi.
    Could anybody enlighten me on the Role of  CCMS / CEN in the Solution manager Monitoring.
    I have set up solution manager to Monitor my landscape. I have set up user defined limits and email alerts. These Alerts and the alerting agent - I assume - are carried out on the system being monitored.
    Now the question - I want the Solution manager box to be the CEN and do the Alerting centrally (from the SM box)  -  Will the MTE's and Alerts that I have assigned and configured through System Monitoring use the properties set up though the CCMS?
    I assume I will have to install the CCMS agents on all the target boxes - Will the Solution manager box process the Statics and send out the alerts from itself? If so How much workload does this place on the network and the box?
    Why does the solution manager not act as the central processing and alerting box from the start? If we go through the effort of setting up the monitoring - why does it not set up Collection and Alerting at the same time? 
    Any feedback will be appreciated.
    Thanks
    Terry H.

    Hi Terry,
    Solution Manager System Monitoring is using CCMS infrastructure, so we have two different ways to collect data (alerts) from the satellite systems, first via CCMS agents as you mentioned or the option to use RFC destinations to read the alerts. This can be configured automatically by SMSY in Solution Manager. The second option produces higher network workload, because every alert will be checked every 3 minutes, with agents only new alert values will be pushed.
    I hope this info helps you
    Regards,
    uDo

  • Is there is any way to find the data transfer from client to Configuration Manager for health monitoring and hardware Inventory

    Hi
    Can Configuration Manager provide a way to find the data transfer from client to Configuration Manager for health monitoring and hardware Inventory. How can I know what amount of data is consumed during that process

    Place archive_reports.sms in %systemroot%\ccm\inventory\temp\ for both 64-bit and 32-bit computers.
    There are two situations where you can use this depending on the type of client:
    1. To keep inventory reports on a client (that is not an MP), create the following file:
    %systemroot%\ccm\inventory\temp\archive_reports.sms
    2. To keep inventory reports on a MP (that is also a client), create the following file:
    <x>:\sms_ccm\inventory\temp\archive_reports.sms
    The XML file will be saved in the inventory\temp folder.
    More information on the above here: http://blogs.technet.com/b/configurationmgr/archive/2012/09/17/controlling-configuration-manager-2012-using-hidden-files.aspx

  • Should I combine two 1Tb drives into one logical 2Tb drive or use one 1Tb drive for system/apps and move /users to the other 1Tb drive?  (I'd like ease of b/u too.)

    Hello,
    I have two 1Tb drives in my Mini, the first is full and the second one empty.  (I've been using the 2nd for Time Machine but the full source from dirve 1 soon has Time Machine complaining.)  I am contemplating whether to form one 2Tb logical drive from the two 1Tb drives or segregate their use, i.e. use the first 1Tb drive to hold the system and applications while moving the /users directory tree to the second 1Tb drive?
    I'm assuming both are straight forward to do accomplish but have nagging doubts about segregating drive usage, will moving the /users directory tree to the second 1Tb drive:
    impact apps which might otherwise expect to see particulat fies and directories in specific user related locations on the system drive;
    hinder backing up (by having to setup two separate Time Machine activities)?
    Finally, is there a better 3rt option?
    Thanks,

    Thanks and sorry Allan,
    The supplementary questions would arise should I NOT chose to combine the separate drives into a larger logical one but to keep one of the two drives for system/apps and the other for users data...  I assumed that segregating drive usagel like this might reult in issues with apps which might expect to see some user directories/files on the same drive as the system/apps.  similarly, with two physical drives, I'd be looking to managing separate Time Mchines.  (I have a few 2Tb pocket drives for backups.)
    Final question - if I do combine into a single logical drive (for system, apps, /users ... the whole lot), would I have any problem getting this logical one working from a Time Machine backup?  I ask that this backup was taken from the 1Tb physical drive and now I'd be looking to put it back onto a 2Tb logicl drive.
    Thanks,

  • Setup and Configure IM Components SSO and DAS on Replica RMS Node

    Dear All,
    I was trying the step
    Step 5: How to Setup and Configure IM Components SSO and DAS on Replica RMS Node In Multimaster Replication (MMR) with Identity Management (IM) Cluster in High Availability Env
    But, at the stage to connect to OID, it is not connecting to the RMS database.
    When I checked login through ODM, it is connecting fine. also, ldapbind is also binding fine.
    How to solve this ? What will be the issue and where to check it ?
    Also, from the RMS, when I am connecting through EM console, I am not getting any output on Infrastructure link to change the passwords. its showing
    Identity Management
    Error retrieving information of default metadata repository.
    Unable to establish secure connection to Oracle Internet Directory Server ldap://devportal.paaf.gov.kw:636/ Base Exception : javax.naming.AuthenticationException: [LDAP: error code 49 - Invalid Credentials]
    If there is any experts, pls reply. Because, last time I created a TAR and it took months to resolve and ultimately nothing happened they closed the TAR after some time as I was busy with some other works and not able to proceed with the synchronization.
    Thanks in advance,
    With Regards,
    Sheeja Anil

    Rule [ 47 ]: fuser link
    ~~~~~~~~~~~~~~~~~~~~~~~
    Description:
    Check if the fuser symbolic link /sbin/fuser -> /bin/fuser exists or
    not. This is required for Suse 8.0 and Suse 9.0.
    Test [ PASSED ] :
    Not required =~ Exists|Not required
    Action:
    fuser link exists or not required.
    Rule [ 48 ]: orarun package
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Description:
    Check if the orarun package is installed and if the oracle user
    environment need to be reset. This is only required for Suse 8.0 and
    Suse 9.0.
    Test [ PASSED ] :
    Not applicable =~ Not installed|Installed correctly|Not
    applicable|Environment reset not required
    Action:
    orarun is not installed or installed correctly.
    Rule [ 49 ]: semmsl
    ~~~~~~~~~~~~~~~~~~~
    Description:
    Check if semmsl kernel parameter is 256 or higher. For more details on
    how to configure this parameter, refer to Oracle Application Server
    10.1.2 Installation Guide - Chapter 4 - Section 4.3.2 Configuring the
    Kernel Parameters on Linux.
    Test [ PASSED ] :
    Adequate = Adequate
    Action:
    semmsl kernel parameter is 256 or higher.
    Rule [ 50 ]: semmns
    ~~~~~~~~~~~~~~~~~~~
    Description:
    Check if semmns kernel parameter is 32000 or higher. For more details
    on how to configure this parameter, refer to Oracle Application Server
    10.1.2 Installation Guide - Chapter 4 - Section 4.3.2 Configuring the
    Kernel Parameters on Linux.
    Test [ PASSED ] :
    Adequate = Adequate
    Action:
    semmns kernel parameter is 32000 or higher.
    Rule [ 51 ]: semopm
    ~~~~~~~~~~~~~~~~~~~
    Description:
    Check if semopm kernel parameter is 100 or higher. For more details on
    how to configure this parameter, refer to Oracle Application Server
    10.1.2 Installation Guide - Chapter 4 - Section 4.3.2 Configuring the
    Kernel Parameters on Linux.
    Test [ PASSED ] :
    Adequate = Adequate
    Action:
    semopm kernel parameter is 100 or higher.
    Rule [ 52 ]: semmni
    ~~~~~~~~~~~~~~~~~~~
    Description:
    Check if semmni kernel parameter is 142 or higher. For more details on
    how to configure this parameter, refer to Oracle Application Server
    10.1.2 Installation Guide - Chapter 4 - Section 4.3.2 Configuring the
    Kernel Parameters on Linux.
    Test [ PASSED ] :
    Adequate = Adequate
    Action:
    semmni kernel parameter is 142 or higher.
    Rule [ 53 ]: shmall
    ~~~~~~~~~~~~~~~~~~~
    Description:
    Check if shmall kernel parameter is 2097152 or higher. For more
    details on how to configure this parameter, refer to Oracle
    Application Server 10.1.2 Installation Guide - Chapter 4 - Section
    4.3.2 Configuring the Kernel Parameters on Linux.
    Test [ PASSED ] :
    Adequate = Adequate
    Action:
    shmall kernel parameter is 2097152 or higher.
    Rule [ 54 ]: shmmax
    ~~~~~~~~~~~~~~~~~~~
    Description:
    Check if shmmax kernel parameter is 2147483648 or higher. For more
    details on how to configure this parameter, refer to Oracle
    Application Server 10.1.2 Installation Guide - Chapter 4 - Section
    4.3.2 Configuring the Kernel Parameters on Linux.
    Test [ PASSED ] :
    Adequate = Adequate
    Action:
    shmmax kernel parameter is 2147483648 or higher.
    Rule [ 55 ]: shmmni
    ~~~~~~~~~~~~~~~~~~~
    Description:
    Check if shmmni kernel parameter is 4096 or higher. For more details
    on how to configure this parameter, refer to Oracle Application Server
    10.1.2 Installation Guide - Chapter 4 - Section 4.3.2 Configuring the
    Kernel Parameters on Linux.
    Test [ PASSED ] :
    Adequate = Adequate
    Action:
    shmmni kernel parameter is 4096 or higher.
    Rule [ 56 ]: msgmax
    ~~~~~~~~~~~~~~~~~~~
    Description:
    Check if msgmax kernel parameter is 8192 or higher. For more details
    on how to configure this parameter, refer to Oracle Application Server
    10.1.2 Installation Guide - Chapter 4 - Section 4.3.2 Configuring the
    Kernel Parameters on Linux.
    Test [ PASSED ] :
    Adequate = Adequate
    Action:
    msgmax kernel parameter is 8192 or higher.
    Rule [ 57 ]: msgmnb
    ~~~~~~~~~~~~~~~~~~~
    Description:
    Check if msgmnb kernel parameter is 65535 or higher. Refer to Oracle
    Application Server 10g Installation Guide 10g - Chapter 4 - Section
    4.3.3 Configuring the Kernel Parameters on Linux for more details on
    how to configure this.
    Test [ PASSED ] :
    Adequate = Adequate
    Action:
    msgmnb kernel parameter is 65535 or higher.
    Rule [ 58 ]: msgmni
    ~~~~~~~~~~~~~~~~~~~
    Description:
    Check if msgmni kernel parameter is 2878 or higher. For more details
    on how to configure this parameter, refer to Oracle Application Server
    10.1.2 Installation Guide - Chapter 4 - Section 4.3.2 Configuring the
    Kernel Parameters on Linux.
    Test [ PASSED ] :
    Adequate = Adequate
    Action:
    msgmni kernel parameter is 2878 or higher.
    Rule [ 59 ]: file-max
    ~~~~~~~~~~~~~~~~~~~~~
    Description:
    Check if file-max kernel parameter is 131072 or higher. For more
    details on how to configure this parameter, refer to Oracle
    Application Server 10.1.2 Installation Guide - Chapter 4 - Section
    4.3.2 Configuring the Kernel Parameters on Linux.
    Test [ PASSED ] :
    Adequate = Adequate
    Action:
    file-max kernel parameter is 131072 or higher.
    Rule [ 60 ]: ip_local_port_range
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Description:
    Check if ip_local_port_range kernel parameter is between 10000 and
    65000 or higher. For more details on how to configure this parameter,
    refer to Oracle Application Server 10.1.2 Installation Guide - Chapter
    4 - Section 4.3.2 Configuring the Kernel Parameters on Linux.
    Test [ PASSED ] :
    Adequate = Adequate
    Action:
    ip_local_port_range kernel parameter is between 10000 and 65000 or
    higher.
    Rule [ 61 ]: limit processes
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Description:
    Check if the limit of max processes is set to 16384 or higher. For
    more details on how to configure this parameter, refer to Oracle
    Application Server 10.1.2 Installation Guide - Chapter 4 - Section
    4.3.2 Configuring the Kernel Parameters on Linux.
    Test [ PASSED ] :
    Adequate = Adequate
    Action:
    The limit of max processes is set to 16384 or higher.
    Rule [ 62 ]: limit descriptors
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Description:
    Check if the limit of file descriptors is set to 65536 or higher. For
    more details on how to configure this parameter, refer to Oracle
    Application Server 10.1.2 Installation Guide - Chapter 4 - Section
    4.3.2 Configuring the Kernel Parameters on Linux.
    Test [ PASSED ] :
    Adequate = Adequate
    Action:
    The limit of descriptors is set to 65536 or higher.
    Rule [ 63 ]: Port 1521
    ~~~~~~~~~~~~~~~~~~~~~~
    Description:
    Check if port 1521 is free or not. If port 1521 is used by an Oracle
    listener version 10.1.0.2 or later, then the existing listener will be
    used by the existing database and the Oracle Application Server 10g
    Metadata Repository. The installer will perform this configuration
    automatically. If port 1521 is used by an Oracle listener version
    earlier than 10.1.0.2, then the existing listener need to be stopped.
    After the installation is complete, the new 10.1.0.2 listener can be
    configured to listen to the existing (pre 10.1.0.2) databases. If port
    1521 is used by non-oracle programs, then this program need to be
    configured to listen to ports other than 1521. Refer to Installation
    Guide, section 4.4.4 for more details.
    Test [ PASSED ] :
    TNS Listener 10.1.0.2 or higher is running =~ TNS Listener 10.1.0.2 or
    higher is running|Free
    Action:
    Port 1521 is not used, or is used by TNS*Listener version 9.0.1 or
    higher.
    Rule [ 64 ]: Environment Variables
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Description:
    Check if the following environment variables are not set: TNS_ADMIN,
    ORA_NLS, and LD_BIND_NOW. In addition, the following environment
    variables must not references to any existing Oracle Home: PATH,
    CLASSPATH and LD_LIBRARY_PATH.
    Test [ FAILED ] :
    Has reference to existing Oracle Homes = Properly defined
    Action:
    Refer to the following table for the necessary action to take:
    <PRE>
    Return Value          Action
    Has reference to existing     Remove any reference to existing
    Oracle Homes          Oracle Homes from PATH, CLASSPATH
                        and LD_LIBRARY_PATH.
    Some variables are set     Unset TNS_ADMIN, ORA_NLS, and
                        LD_BIND_NOW.
    Cannot access /etc/oratab     Grant read permission on
                        /etc/issue to the current user.
    </PRE>
    Rule [ 67 ]: DNS Lookup
    ~~~~~~~~~~~~~~~~~~~~~~~
    Description:
    Check if the host is properly registered in the DNS.
    Test [ FAILED ] :
    nslookup IP_address = Host correctly registered in DNS
    Action:
    Refer to the following table for the necessary action to take:
    <PRE>
    Return Value          Action
    nslookup host.domain     The DNS server failed to resolve the
                        nslookup using host.domain.
    nslookup IP_address     The DNS server failed to resolve the
                        nslookup using IP address.
    Cannot determine IP address Fix any problem with host IP address.
    Cannot access          Grant execute permission on
    /usr/bin/nslookup      /usr/bin/nslookup to the current
                        user.
    </PRE>
    Rule [ 68 ]: /etc/hosts format
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Description:
    Check if /etc/hosts file contains a line with "ip_address
    fully_qualified_hostname short_hostname".
    Test [ PASSED ] :
    Contains host.domain = Contains host.domain
    Action:
    The Fuly Qualified Domain name has been set correctly.
    Rule [ 69 ]: Oracle Home length
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Description:
    Check that the path to the Oracle home directory is not longer than
    127 characters.
    Test [ PASSED ] :
    Less than 127 char = Less than 127 char
    Action:
    Oracle Home directory is not longer than 127 characters.
    Rule [ 70 ]: Memory for Dev Kit
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Description:
    Check if the machine has enough memory to install Developer Kits
    install type. The minimum requirements is 256 MB.
    Test [ PASSED ] :
    Available = Available
    Action:
    The machine has enough memory to install J2EE & Webcache install type.
    Rule [ 71 ]: Memory for BI&Forms
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Description:
    Check if the machine has enough memory to install Business
    Intelligence & Forms install type. The minimum requirements is 1 GB.
    Test [ PASSED ] :
    Available =~ Available|Install type not available
    Action:
    The machine has enough memory to install Business Intelligence & Forms
    install type.
    Rule [ 72 ]: Space for BI&Forms
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Description:
    Check if the machine has enough disk space to install Business
    Intelligence & Forms install type. The minimum requirements is 2 GB.
    Test [ PASSED ] :
    Available =~ Available|Install type not available
    Action:
    The machine has enough disk space to install Business Intelligence &
    Forms install type.
    Rule [ 73 ]: control-center
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Description:
    Check if the minimum required control-center package version is
    installed. For RedHat AS/ES 4.0: control-center-2.8.0-12.
    Test [ PASSED ] :
    Adequate =~ Adequate|Not required
    Action:
    The required compat-db package version or higher is installed.
    Rule [ 74 ]: xscreensaver
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    Description:
    Check if the minimum required xscreensaver package version is
    installed. For RedHat AS/ES 4.0: xscreensaver-4.18-5.rhel4.2.
    Test [ PASSED ] :
    Adequate =~ Adequate|Not required
    Action:
    The required compat-db package version or higher is installed.

  • Error when giving untill condition for System time and date

    Hi Experts,
    i am using Untill Loop in my workflow to set condition for System time and date.According to this condition when system date and time is greater than equal to some date and time then mail goes to an agent.But during testing , the workflow gets into error stage.
                 In workflow log i am getting error like
    'Maximum number of    10000 nodes reached' in executed action 'DEQUEUE_NEXT_NODE'  for false condition.
                        Please suggest what may be possible cause or solution for it?
               Points will be rewarded for any good solution.
    Thanks
    Snehasish Das

    Hi,
    You should not use loop for that kind of purpose. It sounds to me that your workflow is looping all  the time, and the maximum numer of nodes is reached soon, and the workflow goes into error.
    You should use the WF deadline functionality for your purpose. For example use in a relevant step the "latest end" tab, and define the deadline there. Then when your deadline is reached, the workflow will continue in a separate outcome, and there you can send your mail.
    Regards,
    Karri

  • Using BASIS data for system monitoring.

    Hi,
    We are looking for some BASIS transactions data(ex ST02,SM21) to be captured and send out of SAP. is there any existing functionality via which the output of the transactions can be captured from the output screen. Is any way using ABAP program by which the data is captured.
    Thanks and Regards,
    Puneet

    Hi!
    Here we use IBM ITM SAP agent to do this work.
    ITM add some programs and transactions to configure this. We configure RZ20 CCMS monitors and export those alert information to ITM agent that has also integration with IBM Maximo (ITIL based tool to track incidents,changes,problems, etc...)
    I don't have any details about coding of this agent but I think you could use a ready-to-use product or develop your own based on your needs.
    Maybe using an out of the box product will reduce costs managing code (develop and maintenance)

  • CCMS is used for system monitoring , why should we use solution manage ?

    CCMS is used for system monitoring , why should we use solution manage ?
    Whats the relationship between CCMS system and SolMan?
    Thank you .

    hi,
    I just want to ask a question. At our client we have solution manager and CCMS. There is data in CCMS I can extract, it is loading on BW side ok the same number of recs,  but the problem on CCMS cubes says there are the same number of record in the cube and also showing as the data is ready for the reporting. But when I run the report and view the data as listcube it is empty. 
    ANy of you have the situation like this cube say it has the data but when do th BEX or infocube contents the cube is empty nothing in there. The same thing is happening with hourly, 15 minute and daily cubes.
    Anyhelp on this matter is appreciated

  • In System Prefereneces, when I am in Desktop and Screen Saver, I am unable to remove folders. I can click the "-" and the folder appears to be gone, but when I close and then reopen System Preferences, and open Desktop and Screen Saver, the folder reappea

    In System Prefereneces, when I am in Desktop and Screen Saver, I am unable to remove folders. I can click the "-" and the folder appears to be gone, but when I close and then reopen System Preferences, and open Desktop and Screen Saver, the folder reappears in the list. I have tried deleting preferences "plist" but I am totally unable to remove the folders.

    I've seen one other report like yours, and I think the issue is caused by a bug, but I don't know what triggers it.
    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, or by corruption of certain system caches. 
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and  Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

  • PR and PO should be display in IWBK report for stock item.

    Hi Exterts,
    Our client requirement is to display PR and PO number in IWBK report for stock item as well.
    I know PR and PO can be display in IWBK report for non-stock item but how we can display PR and PO for stock item,as PR is generated through MRP for stock item.
    Please share your ideas on this.
    Regards
    Vishu

    Vishu,
    In typical MRP settings you "procure to stock" not "procure to order".
    This means that there is no direct link between the PM/CS orders and any PR/POs created via MRP.
    Subsequently you will not be able to show this data in IWBK.
    However, we are currently designing a customer-specific report similar to IWBK that also counts the number of open POs for a given material on a PM/CS work order. The user can then navigate to ME2M (PO list) or MD04 (stock requirements list) to get further details.
    PeteA

  • Hello guys...im john from the phillippines and im just new to sap business one...ryt now my boss tasked me to research about crystal reports and he is making a demand of report for customer recievables ageing.......i find it hard to look at on the part wh

    hello guys...im john from the phillippines and im just new to sap business one...ryt now my boss tasked me to research about crystal reports and he is making a demand of report for customer recievables ageing.......i find it hard to look at on the part which corresponds to value dates of customer like their lapses in payments for the previous months....anyone who could help me?thanks

    hello guys...im john from the phillippines and im just new to sap business one...ryt now my boss tasked me to research about crystal reports and he is making a demand of report for customer recievables ageing.......i find it hard to look at on the part which corresponds to value dates of customer like their lapses in payments for the previous months....anyone who could help me?thanks

  • There is no iView available for system "SAP_ERP_Common": object "SWF_WIOBN". For more information, contact your administrator.

    Hi All
    I am working on the POWL inbox in portal 7.3 sp11 .
    I have  used
    Application Name : IBO_WDA_INBOX
    Configuration Name: IBO_WDAC_POWL_INBOX
    for integration into portal by using webdynpro abap iview template .
    We are able to get the task and notification in powl inbox .
    But when we click on task item it throwing an error .
    There is no iView available for system "SAP_ERP_Common": object "SWF_WIOBN". For more information, contact your administrator.
    Can you please provide me any steps how to implement the powl inbox inorder to get the UWL Tasks and notifications into this powl inbox .
    And how to resolve the above error .
    Thanks & Regards
    Deepika

    Hi Deepika,
    Please go through the below SAP notes:
    1854661 - The error "There is no iView available for system "XYZ", object "ABC" is encountered when navigating in an MSS or HR Administrator Portal role
    1494536 - Object Based Navigation - Specific Component Note
    Apart from this, you can also go through the following link:
    http://wiki.scn.sap.com/wiki/display/EP/Object+Based+Navigation+-+OBN+Wiki
    BR,
    Anurag

  • There is no iView available for system "SAP_SRM": object "sc". For more inf

    Hello,
    I'm using SRM 7.0 and i'm facing the following problem:
    When we try to open an existing shopping cart:
    "There is no iView available for system "SAP_SRM": object "sc". For more information, contact your administrator. "
    This issue happens when a Purchaser click on any shopping cart number in the Purchasing overview screen.
    It's working fine in the standard role, but i created a new role with some delta links to objects but it's not working.
    I checked the permission on the system SAP_SRM and on the objects they are all:
    Name: Everyone (grouoe)
    Adminstrator: none
    User: checked
    The system alias SAP_SRM is well defined and the connection to this system works fine.
    Any hint for me?
    Thanks in advance,
    Regards,
    Thomas

    It had to do with OBN.
    I copied the role but deleted a folder called "Navigation". But all the iViews to wich the shopping cart needed to navigate were linked under that folder.
    So just copied again the role but this time without deleting the Navigation folder...and away was the problem

  • There is no iView available for system "SAP_SRM": object "qte". For more information, contact your administrator.

    Dear All
    I am getting an error in my SRM system.
    Er "There is no iView available for system "SAP_SRM": object "qte". For more information, contact your administrator."
    I followed the below thread.
    There is no iView available for system &quot;SAP_SRM... | SCN
    I have assigned the Iview to this role.
    The same changes i have done in Development system
    where it is working fine.
    But in my QA system i am getting this error.
    My Portal version is 7.3.
    Please help with your valuable suggestion
    Regards,
    Prashant krishen.

    Dear All
    thanks for your reply.
    I am able to resolve the issue.
    In my case there was some parameter missing in transported object.
    I followed some steps.
    1) I compare the Iview property of transported object with Specialist object.
    2) I found that OBN parameter was missing.
    3) I include it as per above document.
    4)But after that in the rfx response, iview was opening in some tab but when i was trying to open with Overview item i was getting error.
    5) Than i search in portal content with *qte*
    6) I found more iview in Quotation folder i added those iview in strategic purchaser in navigation folder.
    This is how i am able to resolve.
    Thanks everybody for you prompt answer and support

Maybe you are looking for

  • How to reset audio device count in Windows 7?

    Hello, I'm working w/ a fairly abused Windows 7 install that's seen a few chipsets, cpus, and gpus. I've also apparently installed the driver 2 times. Changing from mode to mode in the X-Fi (entertainment to game, etc) takes FOREVER. It gets worse w/

  • Purchase of Dreamweaver Internationally

    I apologise if this is in the wrong section, but I just wanted to find out whether the purchase of Dreamweaver, or any Adobe product for that matter, is region specific. In other words, am I able to buy it, say, in the USA and use it in Australia? Or

  • Breaking in bugs or Faults?

    Hi, first post on the forums so want to say hi to all i have had a N96 for about a week now (well since Monday and have had a few problems, most of them have disappeared like slowness and lag but i have been faced with a few persistent problems that

  • Extraction list roles and users for entreprise portal.

    Hi Everyone, I work on Enterprise Portal only java. I want to extract the list of all these users with their roles How do I proceed? Thanks for the help! Regards Giglio

  • TS3297 How to solve -42110 unknown error?

    Please, how can I solve -42110 unknown error? Thanks