Several konqueror 4.1 problems

Hi all, I am using KDEmod4, and come across several problems with konqueror as listed below:
1. I cannot change the font settings. After I made the change and click OK, then come back to font settings page again, it always has been reverted to the default.
2. My system locale is en-US.UTF8, I installed the Chinese font wqy-bitmapfont (as I speak Chinese), it is automatically set as the default font in konqueror and I don't know why. I cannot change it to another font as mentioned above.
3. Google Reader hotkeys do not work in konqueror, because they are captured and remapped by konqueror to implement a (simple) vi style navigation. How could I disable this behavior?
4. Does konqueror 4.1 support mouse gestures? Is there an extension for this?
Thanks ahead for any help.

:|issue 1 and 2 does not exist, they are between-chair-and-keyboard problems, never mind.. If choosing a font family (like 'sans' and 'sans serif'), it will be automatically mapped to a specific font.

Similar Messages

  • Since updating to LR5.5 it crashes about every 5-10 images while working in the development module. Computer is PC Windows 7 Home Premium. I have been using this computer for several years with zero problems. Is this related to the updating? What is the f

    Since updating to LR5.5 it crashes about every 5-10 images while working in the development module. Computer is PC Windows 7 Home Premium. I have been using this computer for several years with zero problems. Is this related to the updating? What is the fix?

    Do you get an error message? If so, what does it say?
    Do you get a Blue Screen?
    Does something else happen?

  • Firefox frequently 'not responding' having auto-installed version 10 yesterday. No previous problems. Have disabled all plugins and uninstalled and then re-installed Firefox several times today. Problem persists. Can anyone help please?

    Firefox frequently 'not responding' having auto-installed version 10 yesterday. No previous problems. Have disabled all plugins and uninstalled and then re-installed Firefox several times today. Problem persists making continued use of this browser very unlikely unless a quick solution is found! Can anyone help please?

    Perform the suggestions mentioned in the following articles:
    * [[Firefox is already running but is not responding]]
    * [[Firefox hangs]]
    Check and tell if its working.

  • Just download lightroom cc and not open at all. Have desistarei and will install several times and the problem continues ... I need a solution .. thank you  Operating System Windows 7 64bit

    just download lightroom cc and not open at all. Have desistarei and will install several times and the problem continues ... I need a solution .. thank you  Operating System Windows 7 64bit

    Try the following user tip:
    Troubleshooting issues with iTunes for Windows updates

  • Iphone 5 stopped charging and playing music through usb in my 2012 Chevy sonic after iOS 8.1 update. Several friends have same problem. Hard reset didn't help. Help???

    Iphone 5 stopped charging and playing music through usb in my 2012 Chevy sonic after iOS 8.1 update. Several friends have same problem. Hard reset didn't help. Help???

    Fixed it. It is on Chevrolet's end. Press config to access the configuration settings. Turn menu/tune knob to highlight vehicle settings. Press menu/tune to select the vehicle settings menu. Choose return to factory settings.

  • I can not create a new ID in my iphon 4s, well I've created several to solve the problem of FaceTime, and the last restoration would not let me create a new ID. I can do? Thanks for helping.

    I can not create a new ID in my iphon 4s, well I've created several to solve the problem of FaceTime, and the last restoration would not let me create a new ID.
    I can do?
    Thanks for helping.

    Thanks Ckuan
    I can do, to create new ID?
    No way to delete all information from Iphon to create another ID?
    I will appreciate your answer

  • HT201412 After upgrading my iPhone 4S to IOS 8, Opendoor App doesn't run. I have deleted and downloaded the app several time, but the problem still exists

    After upgrading my iPhone 4S to IOS 8, Opendoor App doesn't run. I have deleted and downloaded the app several times, but the problem still exists

    Try:
    - Reset the iOS device. Nothing will be lost      
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Contact the developer/go to there support site
    - Reset all settings                            
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                               
    iOS: Back up and restore your iOS device with iCloud or iTunes
    - Restore to factory settings/new iOS device.                       

  • I have problems with playing movies which are located on a Toledo learning platform. They open and play, however after some time the image goes completely blur, sound stays ok. Several movies have this problem, already checked with school movie is ok.

    so the movie opens and I will see movie + sound for several minutes, however then the image goes blur. School alraedy checked they do not have this problem. So probably it is a problem located on my macbookpro.
    Could someone please help me.
    Already installed latest version of adobe flash player and controlled my security settings of safari.
    How can I check that the movie seruly opens in adobe and for instance not in JW player?

    so the movie opens and I will see movie + sound for several minutes, however then the image goes blur. School alraedy checked they do not have this problem. So probably it is a problem located on my macbookpro.
    Could someone please help me.
    Already installed latest version of adobe flash player and controlled my security settings of safari.
    How can I check that the movie seruly opens in adobe and for instance not in JW player?

  • Konqueror + Flash keyboard problem

    Hi,
    I've stumbled upon a problem today with Konqueror and Flash. It's not that it doesn't work at all... The problem is: i can't use keyboard controlls in flash embedded objects like games etc.
    Anyone could help me with this one?

    I've had that problem before too - both with firefox and konqueror. Move the mouse into the flash object, and click somewhere and let the mouse be inside the flash object. That usually does it for me.

  • FCP Splits QT movie file into several files... problem and solution.

    Hi All,
    I was having problems exporting a QT movie (Video Only) of a 20 min Reel within a Feature Film I edited. The Database was quite large - the film was 2Hrs and Footage was about 12X.
    FCP would split the QT movie file into several files - only one of which was openable (either in FCP or the QT player). To my surprise, I also found that even though the file opened fine, I would get an error message when trying to copy it or its associated files over to another HD (Tiger would abort, after giving me an error No. and saying that there was an error while copying). The problem was repeatable and specific to this sequence.
    After some testing, I found that copying the clips (Video Only) to another sequence and re-exporting, seemed to solve the problem. My take on this is that too many ( > 12? ) Audio tracks causes problems in FCP when the database is large.
    But I do need these additional tracks. Any work arounds?
    Thanks,
    RD

    First, look in System Settings, and see if you've checked the box to limit file size to 2GB. Uncheck that box. See if that helps.
    Or it could just be a corrupt project causing the problem.

  • TX2000 USB Ports, Digitizer and Webcam not working (several people have save problem)

    OK folks this is an old problem that was posted on the old TX/TM board:
    http://h30434.www3.hp.com/t5/TX-TM-Series-Notebooks-Reply/tx2000-usb-ports-digitizer-webcam-all-not-...
    Several of us have had these ports/hardware fail. 
    ****IT IS NOT A BLACK SCREEN FAILURE******
    In my case, the motherboard has very low hours after replacement, full system reinstall, all drivers up to date.  If you take the time to read all three pages, you will see that many of us have tried everything that anyone suggested.  Most of us still believe that this is a software issue as opposed to a hardware issue.
    Not much hope for a soulution, but thought I would try this board since the TX/TM board is now reply only and probably has a very low visit rate.
    Jim

    I also am not able to use the pen and touch features after doing a recovery manager to factory spec, everything else is good but like the others when trying to open Tablet Properties it gives the message a supported  tablet was not found on the system, also after updating the digitizer from hp the version does not change it's still 6.1.6002.18005 when it's supposed to be 5.05-5_HP5 Rev.A.
    I've unblocked the download in properties ran it as administrator,uninstalled the old driver, my USB works my Quick launch buttons work, the screen rotates, the bios is updated. ran HP Update it finds two updates -a HP update software utility and a critical update HP Photosmart and then nothing else when there are many many more at the software and driver page for the TX2000
    Is HP being silent due to the class action lawsuit? Was that a perk that hp got for settling, that they no longer have to address any issue with this Tx2000 series?
    As so many have wrote before...... NEVER AGAIN HP!

  • Severe new onset printing problem with Photoshop CS 5.1 on a MAC OS 10.7.5.

    I have both Epson Stylus 7890 and smaller R2400 printers.   Everything working perfectly until 3 days ago when trying to print on the 7890 and all that happens is lines of “jibberish” patterns on the page that vaguely appear related to the print.   Have wasted about 6 feet of roll paper trouble shooting this with multiple different pics.   Everything prints fine from CS5.1 on the P2400, and other programs (Word, View NX2, etc) print fine on the 7890 – appears to be some conflict with CS5 and Epson 7890.    Thought it might be a corrupted printer driver so I deleted the Epson Files, deleted the printers, emptied the trash, then re-installed the driver from Epson with the same results.    Very frustrating – hours and hours trying to fix this.

    Thanks for your response.   I may not have emphasized in my initial outline that all my other programs print fine on the Epson 7890; only printing from Photoshop is problematic.  Do you still think it is an Epson problem?

  • Send Report to several e-mail addresses problem!

    Hi,
    I want to deliver a report to several e-mail addresses because every page is personalized and has to be delivered to a special e-mail address.What can i do?
    Please help!
    Thanks in advance.
    null

    hello,
    this functionality is available in reports 9i which will be part of 9iAS Release 2.
    regards,
    the oracle reports team

  • I note that several people are having problems loading MS Word files into Pages and the answers have not been helpful.  I too, have had this problem recently, whereas a few weeks ago the uploads worked as the manual said.  Now, a MS Word 2 doc is rejected

    Perhaps the problem lies in the version of the Word file.  Does anyone know what versions Pages 09 will accept?  I have re-installed iWorks09, but that did not solve the problem.  My operating system is 10.6.8 and I am current on updates.

    The Word 2 doc is ancient. I wouldn't even know where to find one to test.
    The obvious thing to test is open the documents you previously opened successfully.
    If they still open successfully, then it is highly likely that the version that is the problem.
    Peter

  • Severe random white noise problem...who to contact?

    i primarily use logic with the vienna symphonic library software and generally things have been great...however.
    occasionally when selecting notes in the piano roll severe blasts of maximum volume usually painful white noise will shoot out of the speakers.
    this is quite unsettling for many reasons.
    i've noticed some threads around the web about this (for example http://discussions.apple.com/thread.jspa?threadID=2144002&tstart=30 ) and i would like to do whatever i can to help apple fix this.
    for me it's pretty specific as it has only happens when editing in the piano roll in a track that has a vsl instrument loaded into it and i click and drag to select multiple midi notes. perhaps it's a vsl issue but the thread i mentioned above suggests there's an apple issue. i'll post this on the vsl forum too.
    what's more disturbing is it's happening more frequently but i haven't changed anything in my setup that seems remotely related to this except upgrade to 10.6.3 today which didn't help.
    i'm using logic 8.02, snow leopard 10.6.3 on a macpro 2.66 quadcore with 8bg of ram.
    so if anyone has any insight on how to fix this it would be wonderful or if someone knows of an address i can send my circumstance to that may help apple fix it that would be great too.
    duane

    AppleCare 1-800-275-2273
    Jim
    PowerBook G3 500 Mhz "Pismo"/ 2.0Ghz BlackBook 2GB OWC RAM   Mac OS X (10.4.9)  

Maybe you are looking for

  • Partner function not working when creating PO with ref to PReq

    Partner function is not working when creating a Purchase Order with ref to a Purchase Requistion, Partner functions maintained in the vendor master are VN, OA & PI. But OA & PI are not appearing in the PO header partner tab when created with ref to P

  • Problem loading XML-file using SQL*Loader

    Hello, I'm using 9.2 and tryin to load a XML-file using SQL*Loader. Loader control-file: LOAD DATA INFILE * INTO TABLE BATCH_TABLE TRUNCATE FIELDS TERMINATED BY ',' FILENAME char(255), XML_DATA LOBFILE (FILENAME) TERMINATED BY EOF BEGINDATA data.xml

  • Using my old appleworks w tiger?

    Just upgraded my computer from os x 1 to Tiger. My iBook came originally with appleworks in the bundle, so most of my word processing is in that. Tiger does not include appleworks of course. Now i have Word for mac, but need to get ito these old file

  • Why it does not recognizes a full haskdisk's capacity ?

    I'm first time to use linksys media Hub model NMH300, I use one 3TB WESTERN Harddisk (WD30EZRX-22DC0B0), and plus it in to slot A, after installation the media hub, I go in to configuration function, and open the Disk TAB to view status of harddisk,

  • I can't restore catalogue lr 3 to lr3 from xp to win 7.

    i've changed permissions in win7 and it still says non writable file and won't install the file.?? but before i changed permissions on external for lr 3 .lcrat i had changed permissions on c: and g drives on pc. oops! i didn't understand the instruct