"severe overlapping of bitmap and distortion of video image"

I'am watching the online seminar " Architecture by Design" on Quicktime after 5 minutes it start showing square bitmap from 4 to several bitmaps to overlapping and distortion of image and stays forever. Audio is running continousley clear and normal. I did upgrade the quicktime and it still doing the same. Please advise - thank you.

Can you post an URL to the video?

Similar Messages

When using Firefox certain videos play but the image is green and distorted.. help?

Firefox 3.6.8 and 3.5 (I downgraded to see if that would solve the issue)
Windows 7
Intel Core i5
Flash Player: WIN 10,1,53,64
When using Firefox certain videos play but the image is green and distorted. The image turns into lines and sometimes it half of the screen of the video. Examples are streaming MLB.tv video and some vimeo videos. The odd thing is that it isn’t all Vimeo videos. Is this a flash issue?
The issue does not happen with Internet Explorer which leads me to believe this is an issue with Firefox. I downgraded to 3.5 and the issue still persists.
Screen Caps: http://yfrog.com/1x46496103j and http://yfrog.com/n112309689j
Any help?
== URL of affected sites ==
http://

Try disabling hardware acceleration in your [http://www.macromedia.com/support/documentation/en/flashplayer/help/help01.html Flash settings] (using Firefox, right-click on any Flash object on a webpage, select Settings, uncheck "Enable hardware acceleration on the Display tab).
Ref:
http://kb.mozillazine.org/Flash#Performance_or_display_issues_with_certain_Flash_videos

Trouble Encoding Still Video Images

Hi All,
Newbie Premier user struggling to finish first video. Here's my problem, and hopefully someone out there has encountered it before:
     I have finally finished creating a very basic, short (~ 2 min.) video (4:3 interlaced; SD DV-NTSC, ) clip containing several interspersed title frames and a single JPEG image serving as my establishing shot. For some reason, the high resolution JPEG image appears jagged and blurry once imported into Premier Pro CS4. After several hours of meddling around I have discovered an interesting phenomenon whereby increasing the magnification percentage from 'Fit' to '100%' in either the Source OR Program monitors restores the image quality. However, when this is done the video quality appears severly interlaced. Can someone shed some light on this issue because I am about to pull my hair out. Thanks.

Hi Jim,
Thank you very much for taking the time to read and reply to my question.
I have rendered out to a .mov file using the DV-NTSC authoring codec and the quality of the video still image is very jagged and blurry. My export settings are as follows:
     Container: Quicktime .mov
     Codec:      DV-NTSC
     Qualty:      100%
     Scan:        Progressive ( Video looks great...image degrades) ; Interlaced (Odd/Upper) field (Image looks great...interlace artifacts predominate)
                                                          ||                                                                                     ||
                                                          V                                                                                    V
     ASR:                                            0.9091                                                                             1.0 (sq.)
     Since my first post I have imported the video into Sorenson Squeeze 5 and compressed using the On2 VP6 Pro codec with Flash 8+ HQ presets. The file size has been reduced ten fold and the video quality has held up well. I have also noticed and improvement in the clarity of the title slides, but the image issue persists. Any thoughts on what is going on here.
Thanks,
DANNY

After several years of use very satisfied with Firefox, recently loaded version (4.0.1) severely slows my browsing, and even my system, especially when there are pictures or videos. I said that this was not the case before and my system is Windows XP SP3.

After several years of use very satisfied with Firefox, recently loaded version (4.0.1) severely slows my browsing, and even my system, especially when there are pictures or videos. I said that this was not the case before and my system is Windows XP SP3.

I have had a similar problem with my system. I just recently (within a week of this post) built a brand new desktop. I installed Windows 7 64-bit Home and had a clean install, no problems. Using IE downloaded an anti-virus program, and then, because it was the latest version, downloaded and installed Firefox 4.0. As I began to search the internet for other programs to install after about maybe 10-15 minutes my computer crashes. Blank screen (yet monitor was still receiving a signal from computer) and completely frozen (couldn't even change the caps and num lock on keyboard). I thought I perhaps forgot to reboot after an update so I did a manual reboot and it started up fine.
When ever I got on the internet (still using firefox) it would crash after anywhere between 5-15 minutes. Since I've had good experience with FF in the past I thought it must be either the drivers or a hardware problem. So in-between crashes I updated all the drivers. Still had the same problem. Took the computer to a friend who knows more about computers than I do, made sure all the drivers were updated, same problem. We thought that it might be a hardware problem (bad video card, chipset, overheating issues, etc.), but after my friend played around with my computer for a day he found that when he didn't start FF at all it worked fine, even after watching a movie, or going through a playlist on Youtube.
At the time of this posting I'm going to try to uninstall FF 4.0 and download and install FF 3.6.16 which is currently on my laptop and works like a dream. Hopefully that will do the trick, because I love using FF and would hate to have to switch to another browser. Hopefully Mozilla will work out the kinks with FF 4 so I can continue to use it.
I apologize for the lengthy post. Any feedback would be appreciated, but is not necessary. I will try and post back after I try FF 3.16.6.

Imported analog video successfully and it is normal in the "Event" pane but when I move a clip into the "Project" pane, it enlarges it slightly and distorts it. How can I keep that from happening?

Imported analog video successfully and it is normal in the "Event" pane but when I move a clip into the "Project" pane, it enlarges it slightly and distorts it. How can I keep that from happening?

Hi
Turn off analyze/image stabilization.
Yours Bengt W

Videos freeze and distorted sound

Hi,
about a week ago i bought the HP Pavilion 15 notebook PC, windows 8-64 bit, Product number: F4T60EA#ABU
that has an intel i5 processor and ITB memory. About a few days after using it the HP support asisstant program suggested a sort of system update that led me to the HP website and i followed the instructions etc.
Unfortunately since then i have been having trouble with any videos i watch online (youtube, streaming etc). The video freezes for a second randomly and then the sound distorts and then the video goes back to playig as normal...this distortion happens every 5-10 seconds of video playing....I have tried uninstalling Flash player and reinstalling the latest version, however this has not helped. I dont really use my laptop for much accept bits of work and the internet so i ahvent downloaded anything that could possibly be the cause.
Please help!
Thank you

Hi numar96, sorry to hear that you are having issues with watching videos. I have had this issue in the past and what I have found resolves the issue is changing the Refresh Rate on the display. I have a short YouTube video that explains how to change the Refresh Rate. Please click on the link that I have provided to get to the video. http://www.youtube.com/watch?v=hzfcxcdKRKo
If this does NOT resolve the issue, please let me know.
Thank you.
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

My audio is really slow and distorted whenever I try and play a video sent through an emails

The audio of any video Link in my emails that I receive,when clicked on to play it, the vocals are very slow and distorted. It sounds like the monotone sound of vocals being distorted to make it unrecognizable. It has been this way ever since I downloaded and installed it.

Currently there is no Flash support for Firefox on Android. Fret not though, there are mobile developers working on front-end Flash support currently and if all follows through you will see Flash support in the near future in a future release of Firefox Aurora.

Why does webpage content appear distorted and wy do videos not operate?

When I open a webpage or try to start a video, they do not work properly. The appearance of webpages is distorted. Videos do not run.

Reset the page zoom on pages that cause problems: <b>View > Zoom > Reset</b> (Ctrl+0 (zero); Cmd+0 on Mac)
*http://kb.mozillazine.org/Zoom_text_of_web_pages
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode

Can I render a Flash frame as a bitmap and send it over TCP/IP?

I want to draw some combination of bitmaps, flash shapes, vectors, text etc and draw them programmatically into my movie using ActionScript, and then get every "rendered" pixel of my movie (at 100% view) into an array that I send to another program over TCP/IP. Can anyone help me here?
The first part of the question is if its possible to render a frame that is a collection of Flash elements as a bitmap? I know that I can iterate through a bitmap and get every pixel using the getPixel method but I'm trying to access the final rendered frame displayed on my screen, including, as I said Flash shapes and text.
The second question is what would be the best way to send this "video frame" over TCP/IP? Would I use an XML socket connection? That is the only way I know how to send data out of Flash over TCP/IP but I don't know if it is the only way - the help page says the data needs to be formatted as XML, which seems unwieldly for this application.
I'm doing this now by using Max/MSP/Jitter to do a screen capture the size and location of my Flash movie and then send out the resulting matrix using a "jit.net.send" object (which lets you send frames of video over TCP/IP), but this is too clumsy for the installation I am building.
Any help would be greatly appreciated!
-bob

Thanks! That was exactly what I was looking for in the first half of the question. And I guess the draw() method works in AS2 as well as AS3. I will test it but from what I understand, I can use a Bitmap as kind of my bottom-level container, then create (in ActionScript) a movie clip that can contain other movie clips or drawing API commands or whatever, animate these various elements then finally draw() them into the bitmap. I see that in AS3 I can even use getPixels or getVector to capture the full "video frame" in one line of code.
Thanks rothrock, for the helpful links. My application is kind of unusual, in that I'm sending "video" data to a proprietary LED controller box for display on a low resolution LED display. I connect to the box over TCP/IP and send it "frames of video" 20 times a second. I got this to work with this other content and software (Max/MSP/Jitter) and I want to see how I could capture all the rendered pixel data in successive frames of Flash animation, format it properly, then send it over TCP/IP to this controller box. Don't really now enough about the various flavors of TCP/IP connections to figure out how to do this in Flash, and I know there are security limitations built in to Flash that have to be worked around. But my movies are small (say 96 pixels by 72 pixels) and I need to send uncompressed data directly to my controller box, so these interesting links showing how to use server-side scripts to create jpgs or pngs are probably not going to help me. I will hopefully find a higher-level programmer than myself to work this out, and I think some of the techniques here will hopefull prove to be helpful.
Thanks again for your help!

TS4057 I did this and now my videos are not working. They show the pictures aren't there on some and on others it shows they are there, but doesn't show them in the player. When I try to Share anything it just says Waiting for Processing for hours. What d

I did this and now my videos are not working. They show the pictures aren't there on some and on others it shows they are there, but doesn't show them in the player. When I try to Share anything it just says Waiting for Processing for hours. What do I do?
I also got Motion and can't figure out how to use it with Final Cut Pro X. Any help woud be great. Thanks

I have no idea what may have caused your MacBook to stop working, but from your description it kind of sounds like it may have started before you ran Software Update and installed the new Apps. Just the general slow feeling and bugginess is what tips me off. You said that you weren't sure if you had closed all open windows, that doesn't matter if the computer restarts itself. It automatically closes all other open applications when restarting.
As to your data being retrievable, if when you take it in they do a fresh install of the OS, then no, it will not be unless you want to pay several thousand dollars to a software retrieval company.
I am glad to hear that you have taken into the Apple Store to get it fixed, and that you have all of your purchased music backed up to your iPod. You should be able to just transfer it all back to iTunes once you get your computer back should it be necessary.
As a side note, the proper place for this topic would probably in the MacBook forums, not iTunes since there is no evidence that iTunes started the issue.

Place holder is coming after deletion of a components from live site page and distorted the alignmet

Place holder is coming after deletion of a component from live site page and distorted the allignment in IE7. Please suggest.

No need for alarm. There are several folks a day posting like threads. Most folks know these phishing attempts for what they are and merely delete with prejudice.
To the bottom line... if you wish - and I am sure Apple will take notice - you should FORWARD the email to [email protected] and delete.
CCC

How do I keep FCP from auto-distorting my video when I drag it into the timeline?

FCP keeps auto distorting my video when I drag it into the timeline. It keeps setting the motion aspect ratio to -12.5, then when I set it to 0 and render, the video has lost significant quality even though I have my motion render settings to: best. I figure it is this motion distort which is ruining my quality on render because the avi from the camera is ridiculously clean and un-pixelated. How do I keep FCP from auto-distorting my video? It makes no sense that it does, because at -12.5 aspect ratio, FCP is creating a letterbox for my video. I just want the video to fill the entire canvas that I chose! There must be a setting somewhere that I have missed, but I cannot figure it out for the life of me. Please help!
I have a video shot on my Pentax K-r that is 1280x 720p 25fps. When run it in quicktime pro, the inspector affirms this sizing. And in QTpro there is no letterbox present when the original is played.
In FCP I have the sequence settings at:
HDTV 720p (16:9) (which is 1280 720)
Timebase: 25
I have tried to turn anamorphic on, then off in the clip format settings, and also turn the anamorphic on and off in the sequence settings. No combination seems to correct the problem.
Any help is appreciated. Thank you,
ML

Hi I have done some more digging and found this:
1) In the bottom left corner of FCPX, click the film reel so that you can see all your projects:
2) Select the project you are having problems with and then in the inspector window, click on the spanner icon in the lower right side:
3) Finally a window appears so that you can choose the settings for the video you are using:
Hope that helps
G

Couldn't open module bitmap and pcidata

hi all! i just finished to install, updating and configuring ARCH 0.7.1.
I installed fluxbox, nvidia drivers but when i type startx comes up an xorg error log which says me that cannot find bitmap and pcidata modules..
Xorg is at 7.0 version and i tried remove-reinstall but nothing solved..
Here is the log
Thanks a lot for your precious help!!
X Window System Version 7.0.0
Release Date: 21 December 2005
X Protocol Version 11, Revision 0, Release 7.0
Build Operating System:Linux 2.6.15-ARCH i686
Current Operating System: Linux myhost 2.6.16-ARCH #1 SMP PREEMPT Mon Apr 24 23:11:22 CEST 2006 i686
Build Date: 20 March 2006
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sun Apr 30 21:12:24 2006
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Xorg Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Card0"
(**) |-->Input Device "Keyboard0"
(**) Option "XkbRules" "xorg"
(**) XKB: rules: "xorg"
(**) Option "XkbModel" "pc105"
(**) XKB: model: "pc105"
(WW) Option "XkbLayout" requires an string value
(**) Option "XkbVariant" "nodeadkeys"
(**) XKB: variant: "nodeadkeys"
(==) Keyboard: CustomKeycode disabled
(**) |-->Input Device "USB Mouse"
(WW) `fonts.dir' not found (or not valid) in "/usr/X11R6/lib/X11/fonts/misc".
Entry deleted from font path.
(Run 'mkfontdir' on "/usr/X11R6/lib/X11/fonts/misc").
(WW) `fonts.dir' not found (or not valid) in "/usr/X11R6/lib/X11/fonts/misc".
Entry deleted from font path.
(Run 'mkfontdir' on "/usr/X11R6/lib/X11/fonts/misc").
(WW) `fonts.dir' not found (or not valid) in "/usr/X11R6/lib/X11/fonts/75dpi".
Entry deleted from font path.
(Run 'mkfontdir' on "/usr/X11R6/lib/X11/fonts/75dpi").
(WW) `fonts.dir' not found (or not valid) in "/usr/X11R6/lib/X11/fonts/75dpi".
Entry deleted from font path.
(Run 'mkfontdir' on "/usr/X11R6/lib/X11/fonts/75dpi").
(WW) `fonts.dir' not found (or not valid) in "/usr/X11R6/lib/X11/fonts/100dpi".
Entry deleted from font path.
(Run 'mkfontdir' on "/usr/X11R6/lib/X11/fonts/100dpi").
(WW) `fonts.dir' not found (or not valid) in "/usr/X11R6/lib/X11/fonts/100dpi".
Entry deleted from font path.
(Run 'mkfontdir' on "/usr/X11R6/lib/X11/fonts/100dpi").
(WW) The directory "/usr/X11R6/lib/X11/fonts/PEX" does not exist.
Entry deleted from font path.
(WW) `fonts.dir' not found (or not valid) in "/usr/X11R6/lib/X11/fonts/cyrillic".
Entry deleted from font path.
(Run 'mkfontdir' on "/usr/X11R6/lib/X11/fonts/cyrillic").
(WW) The directory "/usr/X11R6/lib/X11/fonts/Type1" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/ttf/western" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/ttf/decoratives" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/truetype" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/truetype/openoffice" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/truetype/ttf-bitstream-vera" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/latex-ttf-fonts" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/X11R6/lib/X11/fonts/defoma/CID" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/X11R6/lib/X11/fonts/defoma/TrueType" does not exist.
Entry deleted from font path.
(WW) FontPath is completely invalid. Using compiled-in default.
(==) FontPath set to "/usr/share/fonts/misc,/usr/share/fonts/75dpi,/usr/share/fonts/100dpi,/usr/share/fonts/TTF,/usr/share/fonts/Type1"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(**) ModulePath set to "/usr/X11R6/lib/modules"
(**) Option "AllowMouseOpenFail" "true"
Couldn't open RGB_DB '/usr/X11R6/lib/X11/rgb'
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.2
X.Org Video Driver: 0.8
X.Org XInput driver : 0.5
X.Org Server Extension : 0.2
X.Org Font Renderer : 0.4
(II) Loader running on linux
(II) LoadModule: "bitmap"
(WW) Warning, couldn't open module bitmap
(II) UnloadModule: "bitmap"
(EE) Failed to load module "bitmap" (module does not exist, 0)
(II) LoadModule: "pcidata"
(WW) Warning, couldn't open module pcidata
(II) UnloadModule: "pcidata"
(EE) Failed to load module "pcidata" (module does not exist, 0)
Fatal server error:
Unable to load required base modules, Exiting...
(WW) xf86CloseConsole: KDSETMODE failed: Bad file descriptor
(WW) xf86CloseConsole: VT_GETMODE failed: Bad file descriptor

stonecrest wrote:Does your /etc/X11/xorg.conf have the right path for the modules directory? Since it looks like your fonts path is wrong, I'm guessing your modules path is wrong as well. If you upgraded to xorg7 from 6.*, you have to make some changes.
yes i upgraded from 6.8 to 7.0! i solved with a
xorgconfig
just now but..in the future..what i have to change if i upgrade from 6 to 7? is not enough run again
hwd -x
to create a new xorg.conf for the new xorrg 7.0?

Mystery audio performance changes and distortion

I listen to a lot of rock, hard rock, and heavy metal on my 80GB Video iPod. In the past two months, I’ve been having problems with distortion and equalization. I do have the latest iTunes and iPod software updates installed and I have re-instaled iTunes and re-initialized the iPod.
Originally, I was using the iPod earbuds and upgraded to vModa Vibes. Most of my music sounded great with an EQ setting of “Dance” with the vModas.
After a while, I started to experience distortion and loss of detail, especially on the left side (crackling). I thought I had damaged the vModa Vibes, so I purchased a pair of Ultimate Ears Super.fi 5 Pro Earphones.
The Ultimate Ears Super.fi 5 Pro earphones sounded terrible with no highs or midrange detail and way too much low range. They seemed to distort easily and overload in the-mid range if there was a lot guitars playing (drowning the details out). I tried all sorts of EQ settings to no avail. The problems remained, even on treble boost, but I didn't have a problem specific to the left side.
I returned the Ultimate Ears Super.fi 5 Pro earphones and switched back to the vModa Vibes for a while and finally decided, on the recommendation of a friend, to try the Bose TriPort IE earphones.
The Bose TriPort IE earphones were much better than the Ultimate Ears Super.fi 5 Pro earphones, but still lacked high frequency and mid-range detail as compared to the vModa Vibes.
While switching back and forth between the vModas and the Bose earphones, the sound performance (or equalization) seemed to change at random, even though I kept the EQ set to off.
At one point, the vModas suddenly had incredible bass, while maintaining the other performance characteristics, with the EQ still set to off. Later, I played the same song again, and the bass was normal (all I did was charge the battery with the Apple USB AC adapter).
I’ve been using the vModas again for about a week now, and every time I listen to the same song, it plays differently, sometimes great, sometimes with extra bass, sometimes muddled and distorted. The same thing happens with Bose TriPort IEs, except they aren’t as clear as the vModas.
The performance issues seem to somewhat track battery charging (i.e. – after I charge the iPod up, audio performance changes and it sometimes improves as the battery drains).
I figure that either there is a hardware problem with the iPod or there is some type of EQ virus going around.
Anyone having similar problems or have a solution??

I went out and bought a 2 GB iPod Nano and loaded some songs onto it.
Everything sounds great with the vModa Vibe earphones so I guess my 80 GB video iPod might have a few twisted transistors.
I'll have to try to clear out the 80 GB video iPod and reinitialize/restore it again to see if it corrects the problem.

Fragmented and distorted transitions (in rendered output)

Hi all,
I have a problem with exporting video wherein the transitions are fragmented and distorted. The source video files came from a Mark II EOS 5D. Here is a link to couple caps:
http://imgur.com/a/YEnY0
Do these frames show a common problem? Can anyone give me any leads as to what I might need to change?
I suspect it's something to do with the source video format, but my friend said FC prompted her to conver it to a preferred format, which she did.
thanks

These problems almost always are the result of editing material a non native FCP codec.
If the codec of the video being edited isn't ProRes, you'll need to convert it. Compressor works well for this purpose.
x

"severe overlapping of bitmap and distortion of video image"

Similar Messages

Maybe you are looking for