Sevice packs required for KM & C

Hi
I am new to the KM & C.
What are the latest service packs required inorder to work with KM & C for the below three things:
NWDS(Developer Studio):
Enterprise Portal:
WAS:
Experts reply ASAP

Hi,
The latest Support package available is SP16.
NWDS - SP15
EP and WAS - SP16.
For more information do check http://service.sap.com/sp-stacks
My running version for KM & C is : SP14 patch 2
WAS, EP, NWDS - SP14 ....
Hope this helps.
Regards,
Vijith

Similar Messages

TS1717 Having trouble running iTunes version 11.0.2 on a Dell Laptop running Windows 7 Professional Service Pack 1. Keep getting an error message "the software required for communicating with iPods and mobile phones was not installed correctly..." reinst

Having trouble when I launch iTunes (version 11.0.2) on my Dell Laptop running Windows 7 Professional (service pack 1). I get an error message indicating software required to communicate with iPod and mobile phones was not installed correctly. Do you want iTunes to try to repair this for you? I normally respond with OK and it immediately tells me "could not be repaired. Please reinstall iTunes..." I have done this a number of times to no avail.

I also notice Quicktime is not getting installed at all.
That one is normal nowadays (ever since the iTunes versions 10.5.x).
The software required for communicating with iPods and mobile phones was not installed correctly. Do you want iTunes to try to repair this for you?
Let's try a standalone Apple Mobile Device Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of why it's not installing under normal conditions.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleMobileDeviceSupport.msi (or AppleMobileDeviceSupport64.msi) to do a standalone AMDS install.
(If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleMobileDeviceSupport.msi again.)
Does it install (or uninstall and then reinstall) properly for you?
If instead you get an error message during the install (or uninstall), let us know what it says. (Precise text, please.)

Authorizations required for applying support packs

What authorizations do you require for applying support packs?

After u successfully downloaded the support pack from the service market place , the 1st authorization u need is for using the client 000.
Only with the client 000 u will be available to import the support pack (ABAP suppotr package) using transaction SPAM. To use all SPAM functions, you require the following authorizations:
S_TRANSPRT
S_CTS_ADMIN
If you log on in client 000, then your user master data contains the corresponding authorizations (inside the authorization profile) and you can use all the functions in Support Package Manager.
For Java u can use jspm tool for applying the support packages for any component and if u want to enhance or upgrade the java components( say from ESS 1.1 to ESS 1.2) then u can do it using sdm tool.
Before applying the pack u need to unpack the abap/java files using the commands in the command- prompt and copy the unpacked files into sap/sid/trans/eps/in folders of ur system.
Also before using the SPAM for abap support pack make sure that u had set ur system as the domain-controller in transaction stms with ddic user and masterpwd.
Go thru this document:-
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/7a2e4346-0a01-0010-718a-fa846ad19716
Award points if found helpful

Lync 2013 certificate requirements for multiple SIP domains

Hi All,
I am engaged with a client in respect of a Lync 2013 implementation initially as a conferencing platform with a view to enabling EV functions (inc. PSTN conferencing) in the future. They initially need to support 30 SIP domains and eventually
around 100 SIP domains which is proving to be either not possible or severely cost prohibitive. Their current certificate provider, Thawte, can only support up to 25 SANs and have quoted them 5 figures. We tend to use GeoTrust as they are cheaper but they
appear to have a limit of 25 SANs. GoDaddy appear to support up to 100 SANs for a pretty reasonable cost. My questions are as follows:
Is there a way that I’m missing of reducing the number of SANs required on the Edge server?
Use aliases for access edge FQDNs - Supported by desktop client but not by other devices so not really workable
Don’t support XMPP federation therefore removing the need for domain name FQDNs for each SIP domain
Is there a way that I’m missing of reducing the number of SANs required on the Reverse Proxy server?
Friendly URL option 3 from this page:
http://technet.microsoft.com/en-us/library/gg398287.aspx
Client auto-configuration:
i.
Don’t support mobile client auto-configuration in which case no lyncdiscover.sipdomain1.com DNS records or SANs would be required.
ii.
Support mobile client auto-configuration over HTTP only in which case CNAME records are required for each SIP domain (lyncdiscover.sipdomain1.com, etc. pointing to lyncdiscover.designateddomain.com) but no SANs are required.
iii.
Support mobile client auto-configuration over HTTPS in which case DNS records are required for each SIP domain and a SAN entry for each SIP domains is also required. This is because a DNS CNAME to another domain is not supported over
HTTPS.
If the answer to 1 and/or 2 is no, are there certificate providers that support over 100 SANs?
How do certificate requirements differ when using the Lync 2013 hosting pack? I would think that this issue is something that a hosting provider would need to overcome.
Would the Lync 2013 Hosting Pack work for this customer? The customer uses SPLA licensing so I think is eligible to use the hosting pack but not 100% sure it will work in their environment given that client connections are supposed
to all come through the Edge where their tenants will be internal and also given the requirement for an ACP for PSTN conferencing.
Many thanks,

Many thanks for the response.
I was already planning to use option 3 from the below page for simple URLs to cut down on SAN requirement.
http://technet.microsoft.com/en-us/library/gg398287.aspx
What are the security concerns for publishing autodiscover over port 80? I.e. Is this only used for the initial download of the discovery record and then HTTPS is used for authentication? This seems to be the case from the following note on the below page:
http://technet.microsoft.com/en-gb/library/hh690030.aspx
Mobile device clients do not support multiple Secure Sockets Layer (SSL) certificates from different domains. Therefore, CNAME redirection to different domains is not supported over HTTPS. For example, a DNS CNAME record for lyncdiscover.contoso.com that redirects
to an address of director.contoso.net is not supported over HTTPS.
In such a topology, a mobile device client needs to use HTTP for the first request, so that the CNAME redirection is resolved over HTTP. Subsequent requests then use HTTPS. To support this scenario, you need to configure your reverse proxy with a web publishing
rule for port 80 (HTTP).
For details, see "To create a web publishing rule for port 80" in Configuring the Reverse Proxy for Mobility. CNAME redirection to the same domain is supported over HTTPS. In this case, the destination domain's certificate covers the originating
domain.”
I don’t think SRV records for additional SIP domain access edge is a workable solution as this is not supported by some devices.
As per the below article:
http://blog.schertz.name/2012/07/lync-edge-server-best-practices/
“The recommended approach for external client Automatic Sign-In when supporting multiple SIP domains is to include a unique Access Edge FQDN for each domain name in the SAN field. This is no longer a requirement (it was in OCS) as it is possible to
create a DNS Service Locator Record (SRV) for each additional SIP domain yet have them all point back to the same original FQDN for the Access Edge service (e.g. sip.mslync.net).
This approach will trigger a security alert in Windows Lync clients which can be accepted by the user, but some other clients and devices are unable to connect when the Automatic Sign-In process returns a pair of SRV and Host (A) records which do not share
the same domain namespace. Thus it is still best practice to define a unique FQDN for each additional SIP domain and include that hostname in the external Edge certificate’s SAN field”.
===================
1. Basically the requirement is to initially provide Lync conferencing services (minus PSTN conferencing) to internal, external, federated and anonymous participants with a view to providing PSTN conferencing and therefore enterprise voice services later.
2. The customer currently supports close to 100 SMTP domains and wants to align their SIP domains with these existing domains. The structure of their business is such that “XXX IT Services” provide the IT infrastructure for a collection of companies who
fall under the XXX umbrella but are very much run as individual entities.
Question:
Would you agree that I’m going to need a SAN for every SIP domain’s access edge FQDN?
Thanks.

How to differentiate a packing type for Finished goods based on which customer will be invoiced ?

I need a little expertise
The requirement for my organization is Certain Finish goods packing.
Currently certain, Finished goods packaging items when send to Customer, is charged for the packaging items like Pallets , Q- Bit Boxes.
There will be a deposit fee which will appear on the customer invoice.
Moving forward they want to eliminate that deposit fee, from the customer invoice for a few of the packaging types.. (For example Pallet we would still charge the customer the same way AS_IS today but for another pack type Q-BIT boxes customer should not be charged as a deposit fee for returing the pack type.)
From Materials management perspective… At the time of order entry how do we differentiate a particular pack type so that for that a particular Pack type customer is not charged anything…
2 options I am thinking is introduce a new characteristics in Classification view for PK type.. Upon entering the order the User exit will check the characteristic in material master and customer invoice won’t be charged for the Packing item if Pack type = Q Bit..
Other one is From the Alternate Unit of Measure translation to Common Unit of measure / Sales Unit of measure.
Which one would you recommend ?
Pls advise.

Hi Joe,
What I was suggesting was to have different material codes per pack size. If this is done, you will not need to modify anything, other than maintain condition types for the correct material codes.
In case you are leaning towards the classification approach, I will suggest having a custom calculation type added to include RV64ANNN with a check of the characteristic on a custom table. In this table, maintain the pack sizes with should be charged. The logic should turn XKOMV-KBETR = 0 if the pack size is not found in the table.

Configuration required for attached for a file in a PO in ECC 6.0

Hi All,
1) Is any configuration/setting required for attaching a file in a PO/PR ECC 6.0.
2) How we can mail /send that file, is any enhancement required
Kunwar

Hi,
In One ID for any PO ,when go sytem in toolbar --> sevices for object,I am getting the services for object and showing the attachment ,but in another ID with same server ,computer ,it is showing "No services avaiable"
please guide any configuration/ setting missing?
Kunwar

IPod Not Recognized in iTunes & "Software Required for Commun with iPod. .

Pleasse help! I have about 15 hours invested in this problem, includes 2.5 hours with Apple Technicians, and no help.
I have a new 30G Video iPod that isn't detected in iTunes, although I can see it in exlorer and listed as my G drive. The error message that appears when I start iTunes is,
"The software required for communicating wihtthe iPod is not installed correctly. Please reinstall iTunes to install the iPod software."
I have done the "5 R's" about 8 times, and tried other things including changing the drive letter, unintalling Norton, using the msconfig to limit what was running (per the Apple site directions), removed the temp files (per the Apple site directions, "soft reboots" of the iPod (Menu and round button holds), manually running "C:\Program Files\iPod\bin\iPodService.exe" from the RUN menu, and running regsvr32 c:\windows\system32\atl.dll (per the Apple Tech) from the RUN menu.
A few other notes, 1) in MSCONFIG, my iPod service does not seem to want to run, it shows as "stopped" 2)I had initally installed the iPodUpdater 2005-10-12, which didn't get me connected, and then later updated to 2005-11-17, which still didn't work. I have also installed from scratch from the apple site. When I try to run the Updater, my error reads "iPod Service Error". I don't even understand what this is supposed to do. Perhpas update the iPod software iteself?
When I connect to the other PC in my home, which was loaded with the same Windows CD's, iTunes fires right away and detects this iPod.
On the PC I am trying to coneect with, I have previously had a successful setup with an iPod mini, but now that doesn't work anymore either.
Apples next step is telling me to uninstall/reinstall Windows. This seems like a pretty drastic, and even more time consuming step . . . one that I'd rather not take unless it is fairly certain to resolve this problem
ANY SUGGESTIONS????
Thank you in advance.
iPod 30G Video / Gateway PC Windows XP Service Pack II

Thank you. I'm new to this and will repost.
Gateway Windows XP Service Pack II

Licence is required for RMAN in 10g??

Hi, all.
Licence is required for RMAN in 10g??
Thanks in advance.
Best Regards.

Yes. You need to license the Diagnostic Pack to get AWR.
http://download.oracle.com/docs/cd/B19306_01/license.102/b14199/options.htm#CIHGFIAF specifically states that
The Oracle Diagnostic Pack provides automatic performance diagnostic and advanced system monitoring functionality. The Diagnostic Pack includes the following features:
* Automatic Workload Repository
* Automatic ...
"

Is Solution Manager required for ECC 6.0 upgrade?

We will upgrade our system from 4.7 to ECC 6.0. Is Solution Manager a required tool in ECC 6.0? My understanding is Solution Manager has to be run on a different server, ie. we will have to buy a new server. We have a small SAP implementation with only FI & CO modules, so we are trying to cut our costs if we could. Can anybody share their experience? Thanks for any input.

In an Upgrade , Solution Manager is required for Upgrade Keys and downloading the support packs . Now a days to download the support packs you have to approve it in Solution Manager otherwise it won't show up in your download basket.
May be SAP can provide you the keys & approve the SPs ( they used to do that before ) , in that case it isn't required.
You can also manage your upgrade project in Solman . Sooner or later you need to install solution manager. it's a nice system.Many good features like central monitoring, early watch alert etc etc ...
Thanks
Prince Jose

BI 7.01 SP06 Software Requirements for Backend System (Source System) ECC6

Hello,
We currently have a NW BI 7.0 SP18 system and an ECC 6.0 SP17 system.
We are looking into upgrading our BI 7.0 to a BI 7.0 EhP 1 SP06.
I've been searching for information on any Software requirements for the ECC 6.0 system to make sure it's compatible with the BI 7.0 EhP1 system.
My question is :
Our ECC 6.0 is @ SP 17, which is equivalent to ECC 6.0 EhP 4 SPS 03.
As a prerequisite for BI 7.0 EhP1 I've read ECC6.0 needs to be at EhP4.
1). Is it adequet to have Support Packs equivalent to EhP4?(SP17)
Or do I need to actually apply EhP4 on the ECC 6.0 system?
2). What is the requirement from a PI & PI-Basis prespective on the ECC 6.0 system, for it to work with BI 7.0 EhP 1 SP06?
Our ECC 6.0 currently has PI_Basis 2005_1_700 SP 17.
Where can I fiind information on this?
Any insight would be appreciated.
Thank you.

As a prerequisite for BI 7.0 EhP1 I've read ECC6.0 needs to be at EhP4.
1). Is it adequet to have Support Packs equivalent to EhP4?(SP17)
Or do I need to actually apply EhP4 on the ECC 6.0 system?
If its a prerequisite then you have to apply it. When we upgraded our systems we upgraded both ECC and BI to EhP4/NW EhP1 and EhP1 respectively.
2). What is the requirement from a PI & PI-Basis prespective on the ECC 6.0 system, for it to work with BI 7.0 EhP 1 SP06?
Our ECC 6.0 currently has PI_Basis 2005_1_700 SP 17.
PI_Basis on both the systems will be 7.01 as they are upgraded as part of NW EhP1. You have to use Maintenance Optimizer for downloading EhP's which will take care of all the dependencies.
Hope this helps.
Thanks,
Naveed

Unable to activate after Service Pack 2 for Microsoft Office 2010 (KB2687455) is deployed

I'm having a very strange issue with deploying the "Service Pack 2 for Microsoft Office 2010 (KB2687455)". Here's what I see:
Deploying to a Windows 7 SP1 system fully patched as of 7/29/2013
Using SCCM 2007 R3
Task Sequence installs Office Professional Plus 2010
Task Sequence installs Service Pack 2 for Microsoft Office 2010 (KB2687455)
The Office Professional Plus 2010 install was configured to use our key using the Office Custimization Tool (setup.exe /admin)
When I try to activate the suite using any of the installed applications (word, excel, outlook or powepoint) I get the error "An unspecified error has occurred. Your request cannot be processed at this time. Please try again later. (0x80070190)"
If I repair the install then try the activation again it works right away. This is a good work around for single installs but for my needs of multiple system deployment and for pushing out the Service Pack 2 for Microsoft Office 2010 (KB2687455) to other systems
in my environment this will not work.
Can anyone please suggest a solution to this problem?
Thank you,

Hi
According to my research, this issue occurs when one of the following conditions are true:
If you have CD emulation software installed, a registry key is preventing the hardware ID from being acquired.
A required registry key is not set correctly or is missing.
If you want more detailed information, please refer to the following link:
http://support.microsoft.com/kb/2400124/en-us
Hope it helps
Regards

Support Pack level for R/3 4.7 and BW 3.5 with SAP CRM2007

What should be the Support Pack level for R/3 4.7 and BW 3.5 with SAP CRM2007?
Regards,
Rajesh Banka

>
Rajesh Banka wrote:
> What should be the Support Pack level for R/3 4.7 and BW 3.5 with SAP CRM2007?
>
> Regards,
> Rajesh Banka
Hi Rajesh,
Please see the note '833438', it explains which pack is required in this scenario.
"You cannont connect ERP (R/3) releases lower than 4.6C to CRM 5.0.
All subsequent CRM releases (5.0 or higher) cannot be connected to ERP lower
than (R/3) 4.6C.
These types of system landscapes are not supported by SAP.
If you are using CRM 5.0, you must have implemented Plug-in PI 2004.1
Support Package 10 and, provided you have Basis Release 620 or higher, you
must import PI_BASIS 2005.1 in R/3. --> After you have imported these
plug-ins"
Thanks,
Nitin Sharma

(Deployment) Minimum Software required for BUILD server and IIS WebServer

We have a simple .Net SDK application written using VB-2005 and the Crystal Reports XI (R2) DEVELOPER package.
The RPT files are posted on our BOE-XI (R2) server, and are called using the View-On-Demand method from the Page Server (similar to the SDK sample application). At some point in the future, our .Net applications may invoke some of the other SDK content types.
In our environment, the .NET web-applications are checked-in to Clear Case, and then sent to a stand-alone BUILD server to be compiled. The compiled .NET web-applications are then posted to a stand-alone IIS WebServer (not the IIS server that hosts BOE InfoView/CMC).
The BUILD server and IIS WebServer have to be as "stripped-down" as possible in order to go through our QAT and Impact Analysis process.
So far we have had success if we deploy the SDK-only install from the Crystal Reports XI (R2) DEVELOPER package, and the service packs, but it doesn't include all the SDK components for other BOE content types.
If we deploy the Client-only install from the BOE-XI (R2) package, and the service packs - it doesn't seem to include the CR-Viewer which we need. But it does includes a bunch of extra software (eg. UNIVERSE DESIGNER) on the desktop of the BUILD server and IIS WebServer that our QA guys don't like.
What are the Minimum Software required for BUILD server and IIS WebServer to support CR and BOE SDKs...?
Are there any install packages that contain JUST those components, and not all the extra software that is not needed to Build/Deploy in .NET...?
Thanks in advance for the advice.

Due to the CrystalDecisions.web.dll for the 2.0 framework being left off the BOE CD you will need to install the Crystal XI R2 runtimes as well as the BOE SDK.
To get the BOE SDK launch the Enterprise XI R2 installer and choose Server Install - not Client Install. Choose a Custom install. You'll be presented with a drop down list for the Enterprise components. Deselect everything and then look for the Developer Components option. You may have to drill down into one of the levels to find it. Under Developer Components you'll see the BusinessObjects Enterprise .NET SDK. Select it to install it.
Jason

FAQ: What are the System Requirements for the Photoshop CS6?

System Requirements for Photoshop CS6:
Windows
Intel® Pentium® 4 or AMD Athlon® 64 processor; 2GHz or faster processor
Microsoft® Windows® XP with Service Pack 3; or Windows 7
1GB of RAM
1GB of available hard-disk space for installation; additional free space required during installation (cannot install on removable flash storage devices)
1024x768 display (1280x800 recommended) with qualified hardware-accelerated OpenGL graphics card, 16-bit color, and minimum 512MB of VRAM (Recommended - 1 GB)
DVD-ROM drive
Mac OS
Multicore Intel processor (64-bit processors only)
Mac OS X v10.6.8 or v10.7 (64-bit application only)
1GB of RAM
2GB of available hard-disk space for the files; additional free space required during installation (cannot install on a volume that uses a case-sensitive file system or on removable flash storage devices)
1024x768 display (1280x800 recommended) with qualified hardware-accelerated OpenGL graphics card, 16-bit color, and minimum 512MB of VRAM (Recommended - 1 GB)
DVD-ROM drive
This software will not operate without online registration and activation. You must accept the license agreement to use this product.
* Some GPU-enabled features are not supported on Windows XP.
** This product may integrate with or allow access to certain Adobe or third-party hosted online services (“Online Services”). Online services are available only to users 13 and older and require agreement to additional terms of use and Adobe’s online privacy policy (see www.adobe.com/go/terms). Online services are not available in all countries or languages, may require user registration, and may be discontinued or modified in whole or in part without notice. Additional fees or subscription charges may apply.
For additional information, please read the following post:
Photoshop CS6 Operating System Support…and beyond
Thanks,
The Photoshop Development Team

System requirements | Photoshop

Where do I find the HTML5 pack download for Illustrator 15.1.0?

I am unable to find a working link to download the HTML5 pack for Illustrator 15.1.0. Links such as http://labs.adobe.com/downloads/illustrator_html5.html all redirect me to CS6 marketing. Am I misunderstanding the installation steps required for HTML5 or are all links to download the HTML5 pack currently broken?

Here are some things I have been able to figure out:
If you put an element on a layer and name it, it will export as an ID in the SVG file you can select using CSS.
If you apply a style from the graphics styles palette to a group of items, the will export as classes you can select using CSS.
Best to always work in .ai and export the SVG each time you test.
When you save as SVG, be sure to check the 'use system fonts' and the 'style elements' options.
Im still figuring out how to export text with classes or IDs.
This is ridiculous! I wish they would enable semantic graphics

Sevice packs required for KM & C

Similar Messages

Maybe you are looking for