SGD 4.6 and Mac OSX 10.6.5 / Keyboard mapping problem

Dear all
With Mac Clients we have the problem that Keyboard mapping does not work correctly:
Swiss German Umlaute like ö ä ü don't appear if we don't specify the xdeswiss.txt keyboard map file under SecurID User Profile - Client Device (we've tried the option Client's Input Locale).
Now the problem is that we also have Users from Spain, UK, France connection to the same SGD also using the SecurID User profile....
Anyone an idea how to solve this?
Best regards
Werner

The regular Mac OS X 10.46 updater will only update Mac OS X 10.45. The combo Mac OS X 10.46 updater will update 10.4 through 10.44 as well as 10.45. When performing troubleshooting or replacing missing software components on your computer, it may be useful to rerun the combo updater. If you will be updating from 10.45 to 10.46, you should use the regular updater, as it is a smaller download.
(13079)

Similar Messages

Adobe Reader 9 and Mac OSX 10.5 - FDF Issue

I have an issue that only happens when using Adobe Reader 9 and Mac OSX 10.5.
When submitting a form from within a PDF, the FDF that gets sent is completely blank.
Tested on Mac OSX 10.4 with Adobe Reader 9 - no issue
Tested on Mac OSX 10.5 with Adobe Reader 8 - no issue
Tested on Mac OSC 10.5 with Adobe Professional 8 - no issue
It only seems to be a combination of OSX 10.5 and Reader 9. Does anyone have any clue about the settings of these two and what might be happening?
Any help is greatly appreciated.

Mac OS 10.4.11: I could not open pdf docs today (12-24-08), uninstalled & installed Adobe Reader 9.0.0. pdf docs icons changed but open, however cannot open Reader from Applications and get: Adobe Reader
Version 9.0.0
Installing/fixing installation
Then immediately get this error message:
Adobe Reader could not install correctly.
Adobe Reader was unable to install a necessary component
and must quit.
Any help out there for me?
Thanks, Tony

I am trying to upgrade from Tiger to Snow Leopard. When I insert the disk and install starts, it states "This disk is used for Time Machine backups" and Mac OSX can't be installed. Does anyone know how to correct this (since Tiger doesn't have Time Mach

I am trying to upgrade from Tiger to Snow Leopard. When I insert the disk and install starts, it states "This disk is used for Time Machine backups" and Mac OSX can't be installed. Does anyone know how to correct this (since Tiger doesn't have Time Machine)?

http://support.apple.com/kb/TS2986

HT201260 my mac mini build is 11G56 and mac osx is 10.7.5 how can i install latest mac 10.8 and above

my mac mini build is 11G56 and mac osx is 10.7.5 how can i install latest mac 10.8 and above

Simply purchase Mountain Lion from the App Store and it will begin installation after the download is complete. Note that it's a large download, about 4.5GB, so you should have a good Internet connection..
However... if I were you, I would just wait another month or so until Apple releases Mavericks - the 'latest' announced version of OS X -> http://www.apple.com/osx/preview/.
No need to pay for two upgrades in a months (or so) time...
Clinton

Help in identifying best available development framework and language for native app development for Windows and mac osx desktops through single code base

Hi Guys
i am try to identify the right development framework and technology for developing GUI application which can run on windows and mac osx.
i am sure that there will be specific handling for both of these os, but at the same time there could lot of code can be same.
is it possible to fulfill requirements of both these OS's through single code base. As of now i am more experienced with Dotnet C# on windows.
Regards
Mukesh Vashisth

Just wanted to quickly confirm
before i dive into xamarian.
Is Xamerian can be Used to build applications for MAC and Windows PC along with mobile devices.

I wanna reinstall Mac OSx lion on MacBook pro, my problem is I dint purchase OSx lion with my apple Id before.so anybody can tell me how to purchase OSx with my apple Id on MacBook

I wanna reinstall Mac OSx lion on MacBook pro, my problem is I dint purchase OSx lion with my apple Id before.so anybody can tell me how to purchase OSx with my apple Id on MacBook

Nope. You can purchase a Snow Leopard DVD for $29.00 through an Apple retailer or ordering from AppleCare:
Apple Store Customer Service at 1-800-676-2775 or visit online Help for more information.
To contact product and tech support visit online support site.

MAC OSX 10.3.6 having Boot Problems(Gray Screen with Spinning wheel all the Time) ,How to restore all the files without Mac Startpup Disc,still is not possible i want to download full CD from Apple Site, Is It Possible to Download!

Hi Frnds,Small Favour for me,...
MAC OSX 10.3.6 having Boot Problem(Gray Screen with Spinning wheel all the Time) ,How to restore all the files without Mac Startpup Disc,still is not possible i want to download full CD from Apple Site, Is It Possible to Download!, Windows 7 is working perfectly , can i restore any files in MAC OSX 10.3.6 through Windows 7, or i need the MAC OSX 10.3.6 Bootable Files i need to enter the MAC OSX....

Hi Frnds,Small Favour for me,...
MAC OSX 10.3.6 having Boot Problem(Gray Screen with Spinning wheel all the Time) ,How to restore all the files without Mac Startpup Disc,still is not possible i want to download full CD from Apple Site, Is It Possible to Download!, Windows 7 is working perfectly , can i restore any files in MAC OSX 10.3.6 through Windows 7, or i need the MAC OSX 10.3.6 Bootable Files i need to enter the MAC OSX....

How do I get Windows's off my MacBook and Mac osx back on?

I purchased a MacBook (A1181) off eBay "for parts" but the only thing it needed was a new battery. I turned it on and everything worked fine, only problem is that it's running Windows 7 professional and is password protected. When I contacted the eBay seller they said the Mac was supposed to be wiped clean and they could not help me because it was sold "for parts." I cannot log in to wipe and I don't have any original discs or any Mac osx discs. I want windows off and a fresh copy or snow leopard on my MacBook. PLEASE HELP

You can use a Snow Leopard retail install disk to erase the drive and install 10.6 Snow Leopard.
Put your install DVD into the optical drive (CD/DVD drive) and reboot. Be sure to either use the disc that came with your Mac, or, if you installed a later Mac OS X version from disc, use the newer disc. As soon as you hear the boot chime, hold down the "c" key on your keyboard (or the Option Key until the Install Disk shows up) until the apple shows up. That will force your MacBook to boot from the install DVD in the optical drive.
When it does start up, you'll see a panel asking you to choose your language. Choose your language and press the Return key on your keyboard once. It will then present you with an Installation window.
Completely ignore this window and click on Utilities in the top menu and scroll down to Disk Utility and click it. You should see your hard drive in the left hand column along with your other drives. Click on the drive and select the Erase tab. Set the format value to Mac OS Extended (Journaled) and click the Erase button. After that has finished select the Partition tab. Type in a Name for your hard drive and select how many partitions you want from the Volume Scheme. The usual setting is one partition. Click on the Options button after you've selected a partition to make sure it's set for GUID. Then click the Apply button and after the Partitioning is done quit Disk Utility.
You can now follow the instructions on the install screen

Anyone having problems with AirPrint HP 5520 and Mac OSX 10.8.2

Hi guys,
I just bought my new Mini and my second HP Wireless printer.
For some reason it does not connect to any of my devices. I have installed all updates, added the printer many times to my network etc.
When I start my HP laptop is does work perfect to print wireless - but I am unable to find the printer with my iPhone, iPad or Mac Mini. Anyone having an idea what to do?
I also configured the printer on Mac OSx many times..
Regards!

You can check the Net log in the Web Console (Web Developer > Web Console;Ctrl+Shift+K) console to see if there are errors with retrieving files.
You need reload the web pages and bypass the cache to refresh possibly outdated or corrupted files from the server.
*Press and hold Shift and left-click the Reload button.
*Press "Command + Shift + R" (MAC)
See also:
*https://developer.mozilla.org/en/Tools/Web_Console

Photosmart D110a Wireless Troubleshooting with D-Link DIR-655 and Mac OSX 10.8

Good evening all,
Apologizes if this has already been posted. I've googled this issue a couple of times, but I still haven't found a solution for this problem.
I have the Photosmart D110a and I'm running Mac OSX Mountain Lion, and my router is a D-Link DIR-655 and my security is WPA-Personal and the router is running in 802.11gn mode. My ISP is Optimum Online.
The issue that I've been having is that the printer works wireless when everything has been recently booted up. As does the scanner. However, if it hasnt been used for a while, the printer shows up in the OSX Print & Scan settings page as idle, but when I try to print, the dialog just says "looking for printer" and never finds it, and just says "The printer is not connected" under the item in the OSX Print Queue. Because of this, I have to restart the computer or restart the printer for them to find each other again.
I've seen other solutions on here, such as giving the printer a static IP address, and this hasn't worked either. The printer is still accessible with the static IP address, which means it's still got a connection to my network, but for some reason the OS isn't recognizing it or something.
It's obvious that the printer works when everything is freshly rebooted, but I still haven't been able to figure out this issue once it's been idle for a while.
Any help would be greatly appreciated!!
Errold

Hi,
Try following my post below, I believe it might be relevant as the router drops the Bonjour connection:
http://h30434.www3.hp.com/t5/Printer-Networking-and-Wireless/losing-connection-to-airprint-a-few-min...
I would also suggest updating your router's firmware and check if that may help:
http://www.dlink.com/us/en/support/product/dir-655-wireless-n-gigabit-router
For any help with this proccess I would highly recommend contacting Dlink support.
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

IPhone not updating due to lack of iTunes and Mac OSX update

Hello,
I have an iPhone 3GS running software version 4.1 and am needing to update it to the next version. When I click on the 'update' button when the phone is connected to my MacBook, a window pops up that says 'This version of iTunes (9.2.1) is the current version'. I realize that iTunes needs to be updated as well, but in order to do that I need a different version of Mac OSX. I have an older MacBook and am currently running Mac OSX 10.4.11
My question is: is the only way to update my iPhone at this point to purchase the OSX Leopard 10.5? I seem to be caught in a dilemna of not having the most up-to-date software on my computer, but I wish it didn't effect my iPhone performance.
Any information would be helpful. Thank you!

You can upgrade the MacBook directly to Snow Leopard for $29.00
<http://store.apple.com/us/product/MACOS_XSNGL>

Safari 3.1. and Mac OSX 10.5.3

Hi everybody,
I accidentaly dumped Safari from my system because I never used it and I didn't like it very much. anyway, I am using Opera but to set Opera as my default Browser I need Safari to change this setting. So I downloaded the new 3.1. Safari version but wasn't able to install it. I got the message that I need Mac OSX 10.2. or newer (wich I already have). So I tried to install the Tiger version as well (out of curiosity) but it didn't work either. Afterwards I was browsing through the threads in this forum and tried all the other suggestions I found, like:
Installing the Safari 2.1. version from the install disk that came with my PBP. I was able to install it but when I tried to launch it I got the message that I cannot use this safari version with my Mac OSX version. And Software Update doesn't mention any Updates for Safari although an older version is installed.
After that I downloaded Pacifist, repaired my permissions with disk utillity, re-downloaded the Safari 3.1 package and tried to install it via Pacifist. The .pkg file was a zero-byte file and whe I marked every file in the package, and clicked on the install button it seemed to work. I was asked for my admin password and wether I want to replace all the files connected to safari. I said yes (like mentioned in another thread in this forum). I quit Pacifist, logged out and in again but Safari is still missing. If I search for safari using spotlight, the only thing that shows up is the .dmg file.
Does anyone have further suggestions??? I'd really appreciate it.
I am really annoyed about all that and I don't understand how Apple can release a new version of their browser wich is incompatible with their new MAC OSX version...

Try this:
Go to /Library/Receipts and look for an item named Safari311Upd.pkg or something similar, and Trash it (don't empty the Trash yet).
Decompress the Safari 311.dmg file by double-clicking on it. When it's done, open the mounted disk image (if it doesn't open automatically) and drag the pkg file to your Desktop. When it's done copying, close the mounted disk image.
Launch Pacifist and open that package that's on your desktop. Click once on the top package icon in the Pacifist window and then choose Install from the menu, and be sure to replace all items related to Safari that it may find. When it's done, try launching Safari and post back with what happens. If everything is fine again, then you can Empty your Trash.
As for Apple releasing a version of Safari that's not compatible with 10.5.3, that's not the case at all. It is entirely compatible; the fact that the OS is claiming something that doesn't make sense to you is not an indication that it doesn't work or isn't compatible.
Mulder

Mainstage 2.2.1 and MAC OSX Lion update 10.7.4 CRASH!

hello there.
I'm dealing with an issue with mainstage and the last update from apple's OS, 10.7.4. The mainstage software (witch is intended for live - and steady - use) is crashing often after the OS update. I'm a professional musician and last night a had the third gig in a row with several problems with my setup. Mainstage starts behaving very strangely, a white intermitent bar appears in both sides of the section with the CPU usage and other infos in the top of the edit window. Then i suddenly can't change preset nor patches. the octaves are wrong and the sounds too. then comes the "rolling ball of mac" anouncing something really wrong. After the first time it happened and mainstage crash until closed, i managed to reopen it in the middle of the gigs... it was very stressing and frustrating.
before the last show, yesterday, I searched for answers in forums and here I found that maybe installing the update from appstore would end this issues. so I did, even being an owner of the logic bundle witch came with mainstage, and paid 29 dollars for the software again. the install was alright but the problems remain (actually it was the worst scenario in a gig for me ever...)
PLEASE HELP! i'm a recent user of the mac system, i have late 2009 macbook pro with mainstage 2.2.1 running mac OSX 10.7.4.
I cant afford having this kind of issues in the middle of my job! this become a real problem for me!
in case anyone would ask, NO, i haven't made a time machine backup in order to roll back the OS. my bad.
thanks,
piero

Its disconcerting to say the least to see that last post by SmithBurg was one year ago. Disconcerting because there didnt appear to be a clear cut solution to an issue that seems to be happening to many users in that for whatever user's MS setups were doing at the time, the end result is that the program quits "unexpectantly" during a show.
I had been using MS originally on a late 2009 MB pro, and as my patches evolved, I started having several issues which would quit MS.
I did find what seemed to be a solution by reinstalling the OS to 10.6.8, and and new "unclogged" system seemed to fix the issue. HOWEVER....a few months later and it "quit unexpectantly" in the middle of a show, or I couldnt get my focusrite scarlet 8i6 inteface to work in preferences...(had to use the MB pro minijack out!!   Which was very noisy with the power supply and I do NEED the power supply for a 4 hour show (that old banana)
I digress......
So, i think my laptop has had its day with all the issues id been having, and I go out 2 months ago and buy Apple's flagship macbook pro for $4200, with the idea that the ultra high specs of the laptop should do the trick.
MS reinstalled....I dont use 3rd party plugs as im content with MS sounds, (although i did install kontact to try out and it was far too memory intensive, so dont actually use it.
So for 1 month I play various shows with no issues. I have not changes the setup at all EXCEPT adding one patch that I made.
Then one gig last month it happens again. I'm flabbergasted now.      "MS quit unexpectantly" but I DONT have wi-fi connected at the random venue, and CANT send apple the error report.
My only choice is to reboot and attempt to get the flow of the show back up again.   Thus loosing the error report.
I NEED a solution, and I cant understand what the error report is even saying.
SPENDING $4200 on a new laptop, and if i had hair, I'd be pulliing it out.SHOULD I HAVE GONE HARDWARE INSTEAD? I know MS now, SO used to it, and i love MS far too much if only it worked for more than 5 seconds.
PLEASE APPLE HELPPPPPPPP!
or any kind users out there with some kinda fault finding knowledge

Sharing clipboard and pasteboard between Wireshark(X11) and Mac OSX

I installed latest Wireshark for Mac version. However, it is interesting that I cannot copy what I have copied in Wireshark and the paste it in my Mac any editor. The reverse direction is also the same. If I have any wireshark filter I would like to apply to Wireshark, it is also not allowed.
I learned that it is because the X11 clipboard and pasteboard are different from Mac OSX.
Do you know if there is any available workaround configuration I can do so as to allow them to share?

By checking through Apple
Discussion Forum, I fixed the problem by below procedure:
1. Delete any ".X" file in your home directory, such as ".Xauthority", in my
case
- It will be automatically recreated
2. Delete "org.x.X11.plist" in ~/Library/Preferences
- It will be automatically recreated
3. Moving the .wireshark and .wireshark-etc to other name
When I open wireshark again, it would like a program having just newly
installed and start over again.
Then I can copy and paste the content between Wireshark packet-capture and
editor in MacOS.

Is Mac OSX 10.7.5 and Mac OSX beta the same?

I wanted to purchase a product and it said it supports "Mac OSX 10.6 – 10.7 (Beta)". My Mac software is 10.7.5 so i was wondering would this product be compatible with my Macbook?
Thanks

Hello:
Be careful - make sure the product is guaranteed to work on a Mac. This reference
10.7 (Beta)
is way out of date. OS X 10.7 was released a long time ago. There is no "beta" version of OS X 10.7.
The current version of OS is OS X 10.8.2.
Barry

SGD 4.6 and Mac OSX 10.6.5 / Keyboard mapping problem

Similar Messages

Maybe you are looking for