Shaky text when export slides to DVD

I am using Keynote 3 for my slideshow. When I export the slideshow to iDVD, then import to iMovie to add the music I created in GarageBand then burn in iDVD, some of the text shakes when viewing on my widescreen tv.
Any suggestions for the text to improve quality or is something malfunctioning when I'm exporting/rendoring/burning the project????
PowerBookG4 Mac OS X (10.4.8)

you could try changing the size of the text, or moving it up or down a pixel or two. Also, what color is the text? Tv's don't like pure white, so if it's white, you might want to make it like 90% (10% grey) instead of white.

Similar Messages

When exporting to a DVD from Final Cut Pro X, what settings are there to make sure you making the highest quality DVD possible?

When exporting to a DVD from Final Cut Pro X, what settings are there to make sure you making the highest quality DVD possible?

There have been a lot of recent reports of difficulties sharing to DVD, but haven't been hearing about unreadable disks. Posibly there was an encoding error. Or it could have been bad media (blank disk).
Does it play in your Mac?
What brand of disks are you using?
Russ

How to get best quality when exporting presentation to dvd?

I have just completed a keynote presentation with 21 slides including various movie clips.
I want to export this to Dvd where it can be played on someone elses computer and then onto a projector.
I have tried exporting it as a Quick time movie and then to idvd, however the quality seems to dimish considerably. The picture is shaky and the resolution seems rather low and grainy.
Could someone tell me how I can get this onto Dvd with the best quality possible. i.e if I change the slide size will this make a difference, or if I make the dvd interactive?
I am a completely new keynote user so I apologise for my ignorance but would appreciate any advice!
Macbook Mac OS X (10.4.8)

Thanks David.
I will give that a go. I went to the Mac store on Regent street, and they were really helpful. The guy there advised me to compress the movie in quick time and then export it onto either a flash drive or ipod, which can then be transfered onto any other computer (mac or p.c) which has quick time downloaded on it. This works for me as I needed my presentation to be exported to my bosses laptop P.C.
Sarah

Repeating row texts when exporting web report to Excel

Dear all,
When exporting a web report (including a structure/hierarchy) to Excel (via the 'export to excel button), the row texts (e.g. balance sheet texts) appear twice (column A and B)in the Excel result.
When using the web context menu 'Export to Excel' this issue does not occur.
I am using a BW 3.5 system which has been upgraded to support pack 16.
I assume it is the combination of the structure and the 'export to excel' functionality that does not match up, because when I switch off the hierarchy functionality in the web report query properties, the export to excel does not give me any problems.
Does anyone know how to solve this issue?
Thanks in advance,
Arjan.

Did you write that software, COTS package called Medgate?
If not then ask that company for support. No one here would know how to fix it. They are using the CR RDC report engine.
Thank you
Don

Anti-aliased text when exporting PDF to image

I need to be able to batch-convert multi-page PDFs to individual bitmap images (one image for each page) with anti-aliased text.
Photoshop works this way if you open a single PDF, allowing you to select one or more pages to rasterize as separate images, but not when batch processing (specifically, if you use the Image Processor script on a folder of images and PDFs, it will rasterize the PDFs automatically, but it will only do so with the first page of each PDF.)
Acrobat, on the other hand, automatically creates an image for each page when exporting, and can do this in a batch sequence, but the text is not anti-aliased, making the image look like a screenshot from 1997. No matter how high an image resolution you select, the text is still jagged when you zoom in.
So, is there a setting I'm missing that will allow the text to be anti-aliased when using Acrobat to export PDF to an image? I am using Acrobat 8, not 9, so something might have changed in the newest version.

Not sure about Acrobat Pro 8, but in Acrobat Pro 9 (not Extended) you can Export>Image>Multiple Choice: JPEG, JPEG2000, PNG, TIFF. I used JPEG and under the options in the export dialog box, leave the filename as is to coincide with the PDF filename and then choose Maximum Resolution under File Settings: Grayscale (JPEG, Quality:Maximum); Color (JPEG, Quality:Maximum) . . . skip down to Conversion Colorspace: Determine Automatically and Resolution choose 600pixels/inch for a letter size document. This will result in a file size of 1.3MB per JPEG image if there is not a lot of information on the page. I chose a simple header, footer with page numbering, and 5 lines of Lorem Ipsum text. 600dpi is overkill, you can go for 300dpi and still result in a decent image that will be able to be printed on a laser photocopier that is connected to a production computer. Obviously if you are printing to a laser printer or a high quality inkjet 300dpi will suffice as well for a letter sized document. But I have been told that 300dpi is not a standard rule of thumb and you must obtain specs from your printer since he/she can calculate by very strict rules the dpi you need for your content. It depends on whether you have background images such as watermarks and also if your text body contains line-art.

APEX 4.Loosing translatable text when exporting/importing to new workspace

Hi everyone,
I am developing a bilingual application (base English translated to french) and I noticed something weird when exporting/importing to another workspace.
First, my application is flagged as requiring synchronization after an import. Yes, I did check that it was not flagged right before the export. I did choose Export Translations.
Secondly, when I look at the translated application in the new workspace, my Region Names are not translated anymore (in english instead of french). When I cmpare the 2 Translation Repositories (using the Manually Edit Translation Repository) I lost all Region Names entries (Column Description = Region name).
Thirdly, when again comparing the 2 Translation Repositories, I have the same number of Strings and Distinct Strings by if I group by Column Descriptions the sub-totals differ and I don't even have the same distinct Column Descriptions.
My test was done with my development workspace and a test workspace (where I deleted all application prior to my test) in the same instance.
Anybody had these problems?
Thanks all
I am using 4.1.1.00.23 on the Oracle Database 11g Express Edition.

Hi there,
Well....I guess "they lied" would be me, huh?
Unfortunately, this is a bug. This issue with region titles was first reported in Bug in 4.1.1: Region Title translations is lost I recorded it as Bug 13801807 - REGION TITLE TRANSLATIONS LOST WHEN IMPORTING AS A NEW APPLICATION ID. It's fixed in APEX 4.2.
I hope this helps.
Joel

How do I preserve cross reference text when exporting to XML?

I am exporting my Framemaker documents to XML. However, when I open the raw XML, the reference formatting is obviously gone. So instead of seeing, say, see Figure 6. I now see, see .
Is there some way to preserve this on export?
Help would be much appreceated!

Josh,
The normal behavior is to have an empty element with the ID/IDRef markup that allows the xref element to be resolved again afterwards, by whatever post-processing step you put the XML through. The text of a cross-reference is a FrameMaker formatting artifact (not unlike a paragraph format, etc.) and is intentionally discarded during export. If you reimport the XML with the empty element, FM will re-resolve the xref, and then will restore the text using whatever format it originally had (the format name is also stored as markup).
If you want to preserve the element tag of the xref, I don't think there is any way to preserve the text, unless you write an import/export API client. You could possibly use an XSLT stylesheet to repopulate the text in some cases, but this seems like a process fraught with many complications.
If you do not care about the element tag, the manual says that you can just unwrap it, then you'll get the xref text. Here is a (rough) snip from the Structure Developers Guide:
Translating FrameMaker cross-reference elements to text in markup
You may not want your FrameMaker cross-reference elements to remain elements in the
markup representation—you can choose to translate them to text instead. To do so, use
this rule:
fm element "fmtag" unwrap;
where fmtag is the FrameMaker element tag for a cross-reference element.
All of this does beg the following question, though... why do you want to do this, especially if the text is referencing figure numbers, page numbers, etc. that have no relevance in the markup? Normally, it is expected that preservation of the markup is the essential thing, allowing the text to be regenerated later by whatever process uses the XML (perhaps including FM). If you drop the element tag, the actual link will be permanently lost.
Russ

Can't select text when export in HTML and Images

I am entirely new to Fireworks and I can't find anyone to teach me Adobe Fireworks. I followed some youtube tutorials but most of them are vague. I am still figuring the way to export from Fireworks to Dreamweaver, without affecting its contents like bitmap images and the text. When I export in HTML and Images format and opened the htm file, I can't select the text I've inserted in Fireworks. Can anyone tell me what I should do?

I cant scroll below or above viewable section of text in any of my Macbooks, iMac, Mac Mini. Never have been able to, never could, except by pressing the arrow keys whilst selecting, to move up or down.
Its stupid
I dont have flash installed (never will do since my first virus of video ad sound running in background from Cnet was downloaded and kept returning until i deinstalled flash).
I believe that this is a universal issue because none of my Macs can scroll out of screen when selecting text, which as a webmaster and developer, is a pain in the butt
My issue is not in word documents, its in everything

Poor Text When Exporting in Muse

When I do a preview or an export the text becomes very poor from what it looks like when i'm working within Muse. I did look online to see if others had this issue and it sounds like it was a problem years ago when Muse was BETA and i'm wondering if thats still not fixed. Any help will be appreciated.

In case it makes any difference i'm using Windows 7.

OSstatus error -9459 when exporting slide show in Aperture 3.0

When I export a slide show in Aperture, I get an error message "OSstatus error -9459". Does anyone know how to solve this problem?

Your other option is to post in the Aperture forum here:
http://discussions.apple.com/category.jspa?categoryID=184
That's where those experts hang out.

Fuzzy text when exporting to SWF from Indesign

Hi, can anyone help? I have exported an interactive doc from CS5 Indesign to a SWF file.
The interactivity works great but all my text is fuzzy when viewing in swf?
text looks fine in pdf format thi?
Any suggestions.
Thanks in advance.

Hello, thank you. I have chosen flash text. Which has sorted the fuzzyness...so big tha
nk you. !! The text has now converted to times new roman?
..any suggestions as to how i keep the text chosen when working in indesign file?
Sorry..im a newbie!

Another issue (bold text when exporting)

Guys, my text is going bold when I export to PDF.
I've tried everything, bringing the text to the front, putting the text on a separate layer and putting that layer at the top.
It's due to a small transparent logo on each page, which I can't afford to lose.
I've searched and what I've done above seems to solve the problem, but it's not for me!
Any other suggestions?

What i've done is put the image back in Photoshop and put a slight background around it which is the same colour as it's background in InDesign.
This seems to have sorted it!
The reason I went away from that method beforehand is because I thought that was what was causing the Yucky Discoloured Box. Obviously from the link you gave me in the other thread it's a printer issue!

OSstatus error -9459 when export slide show

Can someone tell me how to resolve this issue? When I export the slide show containing pictures and musics, I get an error message "OSstatus error -9459".

Welcome to Apple Discussions sam70,
Go the Apple Menu > System Preferences > Energy Saver > Display Sleep
-- Set your display sleep time to never and try exporting again
Hope that helps.

Error Message in FCPX when exporting Project to DVD

I am running Final Cut Pro X version 10.1.4 on OS X Yosemite (recently updated to this). Burning 2 Projects to DVD, one was successful the 2nd failed to burn at 33% complete with error message: Com.Apple.Compressor.CompressorKit.ErrorDomain error-1. Any ideas why this is and what can I do to rectify problem?

Let's see if you get the same error message on another project. Create a new event and import a short clip. Add that to a new project. Share>DVD and change the output device to Hard Drive. Does the export complete?
f it does not, create a new user account and try the same (or similar) test as above from that new user account.
Russ

Lost text when exported text to another computer

Hello everyone,
The new FCPX is great whith the libraries and all, but I still loose my text everytime I use another computer with the FCPX projects and files on my hard drive… Everything goes with it BUT the text (subtitles or titles made in FCP not Motion)…
Anyone knows why ?
Txs
Mathias

Last spring I was involved in an unusually complicated project that built upon a FCP 7 TL, and pulled in a smorgasbord of file formats and effects from various third party apps. The project was cut on two systems, using the same version of X (although different OS versions), referencing media on shared storage, Each time the FCP X work was switched from one system to other, we lost our lower thirds. At the time, I didn't try to diagnose the issue because of time constraints. So they were updated when the movie was finished,
I had assumed that the cause was unrendered title clips (rendering would have really slowed things)…hence my advice, which apparently is bogus. (BTW, I did test before I posted that advice – rendering lower third to see whether they traveled and they did.) Another thing to mention…all of our lower thirds were custom-made in Motion; but apparently that isn't the cause of your issue either.
Hopefully someone here will come up with some better theories…or perhaps a bug that pops up under certain circumstances.
Russ

Shaky text when export slides to DVD

Similar Messages

Maybe you are looking for