Share Screen Issues With More Than One Viewer and ...

Tried to do it multiple times and Skype doens't offer the normal screen choice window and then is locked i.e. you can't hang up the call nor do anything. You ask the viewer/callers to hang up for you and then redieal. HUGE bug.

Hi,
You can create a shared workbook and place it on a network location where several people can edit the contents simultaneously
Just go to the Review tab, in the Changes group, click
Share Workbook.
However, not all features and functionalities are supported in a shared workbook. Please review this article for more details:
http://office.microsoft.com/en-us/excel-help/use-a-shared-workbook-to-collaborate-HP010096833.aspx
Hope this helps.
Thanks,
Ethan Hua CHN
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Similar Messages

  • Can't add a goods-issue with more than one item and one is serial managed.

    Hi,
    We are trying to issue more than one item to a production order using the DI API.  If none of the items is serial managed, they all are accepted and the goods-issue Add is successful.  If one the items is batch-managed, the goods-issue Add is also successful.  I am able to add the goods-receipt if I it contains only one item and it is serial-number managed.  However, if I’m issuing more than one item and one or more of the items is serial number managed, then the DI API will not add the goods-issue.  The error message that appears refers to an item that is not among the items being issued.  The message is:
    -10: (IGE1.WhsCode)(line: 3), ‘Item ‘A00006        ‘ with system serial 1 is not in stock.’
    Again item A00006 is not even in the group of items being issued.
    The code I am using for the serial number part is:
    With oGoodsIssue.Lines.SerialNumbers
              .SystemSerialNumber = rs.Fields.Item("SysSerial").Value
              .ManufacturerSerialNumber = rs.Fields.Item("MfrSN").Value
              .InternalSerialNumber = rs.Fields.Item("IntrSerial").Value
              .SetCurrentLine(n)
              .Add()
              rs.MoveNext()
              n += 1
    End With
    The rs is a recordset that the code is looping through as the serial numbers are being added.
    The error message does not occur during this code.  It occurs when it tries to add the full goods-receipt.  Does anyone have any idea how I can fix this?
    Thanks,
    Mike
    Edited by: Mike Angelastro on Mar 31, 2008 8:43 AM

    Hi Mike,
    Try to do the ".Add" only if you need it. Doing a ".add" without assignation may cause the error you have.
    I guess your n variable start at 1 or 0, so you could put code like this :
    With oGoodsIssue.Lines.SerialNumbers
    if n = 0 then (or 1, also I don't the correct syntax of your programming language)
    .Add()
    end if
    .SystemSerialNumber = rs.Fields.Item("SysSerial").Value
    .ManufacturerSerialNumber = rs.Fields.Item("MfrSN").Value
    .InternalSerialNumber = rs.Fields.Item("IntrSerial").Value
    .SetCurrentLine(n)
    rs.MoveNext()
    n += 1
    End With
    HTH
    Jodérick

  • How do I share my contacts with more than one group? I really don't want to have re-type them into a different group. Help!

    How do I share my contacts with more than one group without having to re-type them into each group?

    Without "pretending" to be yourself on the other phone (change settings) there's nothing else you can do.
    iOS devices are meant to be single user and can't view iCloud.com the same way a Mac or PC can do.
    You need to find a desktop or laptop machine (Mac or PC) to log in at iCloud.

  • By subscribing to Creative Cloud(Photoshop and Lightroom), does it come with more than one license, and is it possible to install it on both Windows and Apple(if it comes with two licenses)? Thank you.

    By subscribing to Creative Cloud(Photoshop and Lightroom), does it come with more than one license, and if it does, is it possible to install on both Windows and Apple's OX? Thanks.

    A Cloud subscription provides for installing working installations on two machines.  You can have mixed operating systems (both Windows and Apple's OX).

  • Synching with more than one computer and attempting to delete more than one

    Rage is not the word. I have been having the worst time with this thing! UGH! 1st I have more than one computer that has different music on each, but this thing will only sync with 1 and delete anything from another library already added. CRAZY! Second I wanted to rip my cds to my computer without being connected to the internet and itunes won't recong the music added at a later time. I have to be connected to the internet for it to Id the music as I am ripping...CRAZY! Then I was attempting to delete the duplicated music that was not Id and it would only allow me to delete one song at a time...CRAZY! Is there a way to have this thing synch with more than 1 computer? Delete songs in a group and not everything in sight. If so how and if anyone has any remedies for the rest of this craziness I would be most appreciative. I took me forever to even figure how to get to the point to post this. I beginning to feel very sorry I bought this thing. I thought I could rip my cds, and use my work and home computers to synch with it. Please someone tell me I wasn't wrong for making this assumption. Will I be able to sych with other ipods? I bought this thing thinking I could was I wrong. I haven't even attempted that yet. I have an 80 GB ipod

    "I have more than one computer that has different music on each, but this thing will only sync with 1 and delete anything from another library already added"
    You can't "sync" that is automatically update an iPod from multiple libraries or computers. If you want to connect and use an iPod on more than one computer you need to change the update preference in the iPod Summary tab to "Manually manage music and videos" and click Apply.
    Using iPod with Multiple computers
    Managing content manually on iPod
    "I have to be connected to the internet for it to Id the music as I am ripping"
    That's correct, iTunes (and other music programs) downloads the information from an online database that contains the details of many thousands of CDs.
    "Delete songs in a group and not everything in sight"
    Click on the first track you want to delete in a list, hold down the shift key and click on the last one, this highlights everything in between. Press the delete key
    "Will I be able to sych with other ipods?"
    What do you want to sync with other iPods, iTunes? You can't sync one iPod with another, you can only update from iTunes. If you are adding a second iPod for your own use, just connect the new iPod to your computer and follow the on screen instructions. It will update from your existing library. Depending on the size of your library and the type of iPod you choose you can have it update all songs and playlists, selected playlists only or you can manage it manually. You can also have a look at this page:How to use multiple iPods with one computer
    You might also be interested in this page: iPod Fast Start: The New User's Guide to iPod

  • Shortest path with more than one traveler and time constraints

    Please have a look at this problem...Thank you..
    (the problem is ok with one traveler. but when two or more come into the picture they really mess things up)
    Here it is
    I have a number of destinations that devides evenly up between a
    number of travelers. (5 travelers with 20 destinations = 4
    destinations each)
    All destination can be visited by all travelers but it can ony be visited once
    Each destination has to be visited and
    each traveler has to visit the same amount of destinations.
    The total amount of traveling has to be minimized.
    Grid references have been given to work out the distance between each
    destination. (the distances have not been worked out prior to the
    start of the problem)
    The starting point of each traveler is not at any of the destinations
    and is different to each other. This point is also known and can be
    used to calculate the distance to any destination.
    there is an extra part of the problem (which I think I can sort out but if its of interest here it is any way): Each destination can only be
    visited at a certain time of the day (ie between 7- 9 and 9-12 and
    12-3 and 3-6)
    A typical problem would have about 300 destinations and about 50
    travelers every day. ie about 6 destination a day per traveler.
    Could any one please give me an idea of how you would go about working the
    routes out for each traveler that minimizes travelling distance as there is no algorithm that does this kind of routing.
    I would really like some help with this one please. I have many ideas of how to do it but i really feel like it is not optimised...
    I have to complete this in one week and have no AI experiance ( I would like to do this without AI or anything to do with ant colonies and or swarm optimization)
    Thank you.

    The reason that the time is in fact a simple constraint is because this is a homework problem and the kids only have a week to work on it. If it were a real world problem you you not conveniently have the number of travelers divide evenly into the number of cities.
    If it were not some homework problem you would not have a constraint that reads "Oh by the way, for extra credit, you can only visit some cities at certain times during the day." It would either be a real constraint or not.
    The other indication that it is a homework problem is that the student was given a week to do it. I will perhaps be going out on a limb here, but NO reasonable business gives some bozo one week to complete an assignment for which the bozo is so clueless that he has to hit the net and ask random people if they can tell him how to do it.
    Had there been any need to model travel time, then velocity of travelers would have been mentioned at some point. If the traveler were actually doing anything in a city, time to load or unload the truck would have been given. And lastly, what real world problem would add a constraint that no two travelers could go to the same city. What if it is shorter to get from A to C by going through B which has already been visited. This constraint was the tip that the solution was a partition of a set of cities.
    My gross simplification is merely that this is a homework problem and therfore if I haven't been told otherwise I am free to assume that a traveler moving at infinite velocity is perfectly OK. This means that my traveler waits at the door to a city until it opens, picks off that city and all other in zero time, until it bangs up against a city that opens at a later time, where it must again wait till opening time. The only thing that prevents him from completing his circuit is if an early city comes after a late city. A simple sort is all you need.
    Lastly, even if you want to toss in a more complicated velocity model, it does little more than mildly complicate the sort comparison calculation so instead of making the comparison
      boolean ICanMakeIt = city.openingTime <= city[i+1].openingTime
    it becomes
      boolean ICanMakeIt = city.exitTime +
    Traveler[j].vel*dist(i,i+1) <= city[i+1].closingTime
    I think you are mistaken in declaring this to be a difficult modeling problem

  • Share excel 2007 with more that one users and edit at the same time

    Dear community members,
    How can I best shere an excell workbook 2007 if I want multiple users to view and edit simultaneously?  The workbook contains macros, conditional formating, and dropdown lists which I want all to be functional!
    Thanks,

    Hi,
    You can create a shared workbook and place it on a network location where several people can edit the contents simultaneously
    Just go to the Review tab, in the Changes group, click
    Share Workbook.
    However, not all features and functionalities are supported in a shared workbook. Please review this article for more details:
    http://office.microsoft.com/en-us/excel-help/use-a-shared-workbook-to-collaborate-HP010096833.aspx
    Hope this helps.
    Thanks,
    Ethan Hua CHN
    TechNet Community Support
    It's recommended to download and install
    Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
    programs.

  • BizTalk:How to share customized pipeline with more than one BizTalk Application

    I have a new BizTalk application which will use a customize generic pipeline . This pipeline has been used in an existing BizTalk application.
    When I use BizTalk Server Administration to add this pipeline assembly as a resource for a new BizTalk application, it shows error message: "this biztalk assembley has already in store and is either associated with another application or another type".
    My questions is how to share the generic pipeline component with many BizTalk application?
    Many Thanks.

    Hi,
    If you plan on using the deployed pipeline across multiple applications in BizTalk you have two options:
    1) The Current Application (in BizTalk Server Administration Console) should have the other application [where the pipeline
    is deployed] as reference.
    right click the "Current Application" and select "Properties"
    on the "Properties" page, left hand side, select "References"
    On the right-hand side, use "Add" to add the "Other Application" as a reference.
    Refer: How
    to Add a BizTalk Assembly to an Application
    Doing so will ensure that ALL resources (maps, schemas, orchestrations, send ports, receive locations, rules, etc.) deployed
    for "Other Application" are available/reprehensible in "Current Application".
    2)  Create a common BizTalk application on BizTalk Admin Console and add your custom pipeline assembly in that new application
    as a resource. With this, you don't need any other application to be started apart from this common application. Any other application who wants to use this pipeline will refer this common application.
    Rachit
    Please mark as answer or vote as helpful if my reply does

  • Send email from SAP with more than one attachment

    Hi all,
    How can i send email with more than one attachment and different types of document(doc,pdf,etc.) from SAP to external?
    Besr regards,
    Munur

    Hi,
    I use :
    CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
    the main problem with different attachemts is to genereate the packing_list.
    the packing list is a kind of description of the data table... where ist the start  of an image, end, size...
    "Creation of the entry for the compressed attachment
            objpack-transf_bin = 'X'.                    " it could be an image
            objpack-head_num = lv_head_num_count .  " inital 1 each att  add 1
            objpack-head_start = 1.                     " fix
            objpack-body_start = gv_startnum.    " table with attachments  1. line one
            objpack-body_num = tab_lines.          " how many lines are in the table of attachment
            objpack-doc_size = tab_lines * 255.   " size of the  attachment...
           objpack-doc_type = lv_typ . " 'JPG'.
            objpack-obj_name = 'ATTACHMENT'.
            objpack-obj_descr = lv_stripped_name  " name of the JPG
       APPEND objpack.
       APPEND LINES OF lt_goscontent TO gt_maildata.  " data Table...
    bestreg
    robert

  • Why is all my icloud account linked with more than one apple id?

    why is my iphone 5 merged with more than one account?

    What do you mean by "merged with more than one account" and "linked with more than one Apple ID"?  What exactly are you seeing on your phone?

  • More than one view with iphone SDK.

    Hi
    I'm trying to make more than one view in Interface Builder and then switch between them in xcode. But I can not figure it out.
    I tryed reading guides, watching tutorials, but with no luck.
    Can anyone here give me a small tutorial on how do that?

    Your best bet is to look through the code (and xib files) distributed by Apple. I was in much the same position a couple of months ago, except my expertise was in JEE. It is really not that difficult to get going. Just a regular Cocoa development book can also help you (it helped me understand how to get going).
    Here is what you will start with
    ApplicationDelegate - Will be connected by default in your primary xib file. For simple applications that is all you need. If you need multiple views, you can still make the primary nib file you primary view and lay it out as you need. Add methods as appropriate to remove current view and display next view you want.
    Xxx.nib - Your primary xib file. Layout out as required. Create a UIViewController and connect to the File's Owner. That connects your controller to the view. Make connections to the view components in the xib file, event handlers etc. It is not difficult, but IMO IB is not very intuitive, though you will get the hang of it very quickly.

  • When texting with more than one person at a time the incoming text scrolls to top of the conversation. anyone out there with the same issue?

    while texting with more than one person at a time the incoming texts scrolls to top of conversation. anyone having this issue?

    I've heard claims it can be done, claims some have done it, and claims that it didn't work for them. This thread is interesting, some indications it should be possible, complaints that it didn't, and also an interesting work-around:
    "How do I text message multiple people at once?"
    http://discussions.apple.com/click.jspa?searchID=-1&messageID=4822260
    You can ask Apple for iPhone changes via this link:
    http://www.apple.com/feedback/iphone.html
    Though if you're requesting hardware changes for iPhone v2 you may want to wait a week (or a month?)...they're probably going to be inundated right now by requests for software changes to the current iPhone.
    (If this has answered your question, please mark your original post as answered)

  • Tables with more than one cell with a high number of rowspan (ej. 619). This cell can not be print in a page and it must be cut. But I don't know how  indesign can do this action.

    Tables with more than one cell with a high number of rowspan (ej. 619). This cell can not be print in a page and it must be cut. But I don’t know how  indesign can do this action.

    set the wake-on lan on the main computer
    The laptop's too far away from the router to be connected by ethernet. It's all wifi.
    No separate server app on the laptop, it's all samba
    The files are on a windows laptop and a hard drive hooked up to the windows laptop. The windows share server is pants, so I'd need some sort of third party server running. Maybe you weren't suggesting to use Samba to connect to the windows share though?
    I'm glad that you've all understood my ramblings and taken and interest, thanks The way I see it, I can't be the only netbook user these days looking for this kind of convenience, and I certainly won't be once chrome and moblin hit the market.
    Last edited by saft (2010-03-18 20:38:08)

  • How Do I Share My Database Between More Than One User Account on the Same Mac?

    How Do I Share My Database Between More Than One User Account on the Same Mac?

    How to use multiple iPhone, iPad, or iPod devices with one computer. The only way is for you to have a separate user account to log into on that computer.

  • InfoSet with more than one cube

    Has anyone created an infoset with more than one cube?
    Are there any hints for to pay attention?
    Regards
    Chäsitzer

    HI ,
    Some important points :
    it is not possible to define an InfoCube as a right operand of a left outer join.
    SAP no longer supports more than two InfoCubes in one InfoSet.
    Therefore, if you include more than two InfoCubes in one InfoSet, the system issues a warning.
    the key figure values of InfoCubes and DataStore objects are duplicated when you join them to
    InfoProviders (see SAP Note 592785)
    Regards,
    Sathya

Maybe you are looking for