Share to quicktime H.264 not rendering sequence. It fails every time.
Hi there,
I have a new sony HDR-CX700 camcorder. I imported the film in apple ProRes 422. When I dragged the footage in sequence, it said would you like to use footage format in sequence, I said yes. So I edited many sequences like this and now when I hit my share button to quicktime H.264, it says render time is about 2 hours (on a 5 min long film) and at the end of two hours, it says sharing failed. Does anyone know how I can solve this problem and export all my footage to quicktime H.264 for final viewing on iTunes, iPads, and iPhones?
Also, my final cut pro version is 7.0.3 Please let me know what I can do.
Thank you,
Caleb
What are your sequence and footage settings?
Also, don't share... instead export a qt movie (command-e) with current settings, "self-contained" not selected. Import that into compressor and apply the settings there.
The plus side to this, you can use FCP while compressor is chugging away.
If the export takes a very long time and your movie is rendered... it could be that your footage settings don't match your sequence settings...
Similar Messages
-
Export>Quicktime movie is not rendering video track, just the audio track. However, everything works when using Quicktime Conversion menu options. What is wrong with my setting for Export>Quicktime movie?
When you converted the original files via MPEG Streamclip, what did you convert them to?
Have you tried trashing your preferences in FCP? Trashing FCP prefs is usually the first step when FCP is performing strangely.
Download Preference Manager from Digital Rebellion (free) at:
http://www.digitalrebellion.com/prefman/
It will allow you to archive your current preferences if you wish to restore them later.
MtD -
Am having intermittent difficulty rendering in FCE. Using the Sequence menu sometimes delivers results and Command R fails every time. Most frustrating. Any thoughts from anyone? Thanks.
Michael,
There is a forum for Final Cut Express I'd recommend re-posting there.
Roger -
my MAc Book PRO 13" Retina display will not update. It crashes every time I try to do an update. I have sent in the information on each update but so far nothing back from Apple. Also it does not matter what I am trying to update, the operating system, and application, each caused the same crash. This mac book is less than a month old.
That is the highest you will be able to go with 3g. You need 3gs or 4 to go any higher (multi processors and more memory needed). Version 4.2.1 marks the end of your updates for that device.
-
I reset my iPhone 5s yesterday because my fingerprint bottom is not working. It says that failed every time I was trying to put my print... Now that I reset my phone the fingerprint pass code do not appear in the setting.
Hi Emilemny,
Welcome to Apple Support Communities.
The TouchID settings will not be available until you create a passcode, see the article linked below for more information.
iPhone 5s: Using Touch ID
http://support.apple.com/kb/HT5883
You can set up Touch ID in iOS Setup Assistant or by tapping Settings > Touch ID & Passcode. To set up Touch ID, you must first set a passcode. Touch ID is designed to minimize the input of your passcode, but you need a passcode for additional security validation, such as enrolling new fingerprints.
-Jason -
I am trying to convert a Microsoft Publisher Document to PDF but it fails every time although the reason is not clear. Anyone else had problems like this and how do I solve it? Thanks. Ray
Hi raythree,
I'm sorry that your PDF conversion is working. Can you please tell me if you're getting a specific error message? Knowing that can help pinpoint the cause of the conversion failure. However, here are a couple of things that you could try:
Clear your browser cache (steps to do this vary by browser).
If you're using a work computer, check with your IT team to confirm if you have firewall/proxy settings that restrict the ability to upload files to the Internet.
Try another web browser. A list of supported browsers for accessing the ExportPDF service is available here: http://www.adobe.com/acom/systemreqs/.
Also, note that there is a 100MB file size limit, so if your publisher file is larger than that, it won't upload to ExportPDF.
I hope this helps. But let us know if you need further assistance.
Best,
Sara -
I have problems with my macbook pro ... I recently bought "OS X Lion Mountain" but complete installation did not work ... purchases every time when I look biem appstore is still installed ... so now I have OS X version 10.8.3 ...
does it say not installed or does it say "download" in app store purchases?
if it say's download, then it's there for future use if you need to download it again.
see image below - i'm running Mountain Lion and it say's download in my App Store. -
How do you turn off the passcode feature from iphone 3GS?? I do not want to get prompted every time I turn on my phone.
Settings > General > Passcode Lock
You're going to really regret this if you ever lose your iPhone. -
I have been trying to update my cc info but for some reason it has kept saying the cc info did not match with the bank info so the transaction failed every time I made an attempt to download something even it was free. However, I saw my cc online got charged $1.00 everything I was trying to update my cc info ...why?
Im wondering why my post hasn't been answered yet. I did file a report with the BBB and I had a rude representative from Verizon call me named Steve. He said I can file all of the reports I want and I will just keep getting calls from him. I can understand why my phone couldn't be replaced because of the small crack. I guess I have to eat that one (but it sucks because the lollipop update is what caused the problems) but what about all of the data overage I had to pay for for trying to fix this phone because of a lollipop update. I dont think it is fair to have to pay that as well. In addition, because I have an east coast phone number but live on the west coast, I cannot have tech support after 8pm. Verizon has cut this off. Im very dissatisfied and I have been a customer of Verizon for 13 years. Im hoping for a response this time.
-
without changing settings, iMac mail V4.6, 1)will not save password 2)takes accounts offline 3)will not except password 4)will not send mail from accounts every time.
What happen? How do I correct this?Hi Nuch1,
I found an article that is contains very thorough Mail troubleshooting steps:
OS X Mail: Troubleshooting sending and receiving email messages
http://support.apple.com/kb/TS3276
You can use that article to figure out what part of the email "ecosystem" is the cause of the issue, and it can also help you attempt to resolve it.
Hope that helps,
David -
my software update fails every time I attempt to update. I have restarted the device, selected software update but when it get to the end of "preparing software update", it fails and says the update was not successful. any ideas?
Welcome to the Apple Community.
If your problem persists get yourself a micro USB cable (sold separately), you can restore your Apple TV from iTunes:
Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
Connect the micro USB cable to the Apple TV and to your computer.
Reconnect the power cable (only for Apple TV 3)
Open iTunes.
Select your Apple TV in the Devices list, and then click Restore. -
not able to make outgoing calls in iphone4. Regularly i face this problem, at the same time i receive incoming call, can do net surfing, can access email and sms, only outgoing calls get failed every time. please answer to solve this problem
Good day Sidharth Namrta,
It sounds like you are unable to make any calls, but you can recieve them, and everything else seems to work fine. I recommend you use the troubleshooting in the following article to help you get that resolved, named:
iPhone: Troubleshooting issues making or receiving calls
Follow the steps below to resolve this issue. Please test after each step.
Toggle airplane mode: Tap Settings > Enable Airplane Mode, wait five seconds, then turn off airplane mode.
Check your phone settings:
Check your Do Not Disturb settings: Tap Settings > Do Not Disturb.
Check for any blocked phone numbers: Tap Settings > Phone > Blocked.
See if Call Forwarding is turned on: Tap Settings > Phone > Call Forwarding.
Ensure that your software is up to date:
Check for a carrier settings update.
Check for an iOS software update.
Note: Some updates may require a Wi-Fi connection.
If the iPhone has a SIM card, reseat the SIM card.
If the iPhone 4 or iPhone 4s is on the Verizon network, dial *228 from the iPhone and select option 2 to update the Preferred Roaming List (PRL). The PRL determines the cellular towers the phone uses for cellular service, selecting those with the best signal strength.
Reset the network settings: Tap Settings > General > Reset > Reset Network Settings.
Try to make or receive calls in another location.
Attempt to isolate to one network band:
If you're having the issue on LTE, disable LTE, if possible, and try again.
If you're having the issue on 3G/4G, disable 3G/4G, if possible, and try again.
Contact the carrier to check the following:
Your account is properly configured to use the specific iPhone that has the issue.
There are no localized service outages.
Your account doesn't have a billing-related block.
Your calls don't have errors on the carrier system.
Restore the phone as new.
If the above steps don't resolve the issue, go to an Apple Retail Store, carrier, Apple Authorized Reseller, or contact AppleCare to send the phone in for service.
Thank you for using Apple Support Communities.
All the very best,
Sterling -
How do I get a numbers spread sheet to open where I left it and not start from the beginning every time I open it?
There is no built-in setting for redirecting a bookmark to a new tab.
Is it possible that the computer which does that has an add-on such as the Tab Mix Plus extension installed? TMP has a setting for that (Events > Tab Opening).
https://addons.mozilla.org/firefox/addon/tab-mix-plus/ -
How do I configure the settings(?) to not have to log in every time I fire up a dark screen? I'm coming off a PC.
Open System Preferences, go to Accounts (or Users and Groups if you're on 10.7), click Login Options, change Automatic Login to the name of your account. You will have to authenticate with your password. If all the boxes are greyed out, click the padlock first to unlock the screen.
Matt -
Time Machine Backup fails every time "Backup could not be completed"
I want to do a new Time Machine Backup on my iMac2007 Snow Leopard 10.6.8 fails every time with message "Backup could not be completed."
Console says "Error 11" Some Files allways can not be copied/saved by Time Machine, i search an exclude them in TM not to save them, try again, new ones po up every time.
Does anyone know a solution?One thing which may help.
I had similar issues....a few times.
Have done all the renaming (<8 characters) etc etc as detailed in these forums.
The first time, I erased TC HD and started again. This fixed things for a few days, and then the same issue came back again.
The next time, I simply copied the sparsebundle file (so I had two sparsebundles, one called xxxxxxxx.sparsebundle, and the other called xxxxxxxx copy.sparsebundle (luckily I had room on the HD to do this)). Then I deleted the original sparsebundle, and before I could rename the copy back to the original filename, the image mounted and started backing up....to the sparsebundle with " copy" still in its name.......so I left it be.
A week or so went by, and then I got the same "unable to mount" error message.
Rather than going thru the whole process again, I simply took the " copy" out of the sparesbundle filename, and all was well again.
I continue to get "unable to mount" error messages occasionally, so I simply rename the sparsebundle file (either by adding or removing " copy"), and it seems to resolve the problem, at least for a while.
While not a fix, it seems to be a workaround for me until Apple works out what the issue is, and fixes it.
Hope this helps someone.
P.S. One word of caution. I just had the thought, while writing this, that I have not actually gone into Time Machine to check that previous backups (eg, one hour ago, one week ago, original backup) are there and are able to be accessed, should the need arise. Because the back-ups appeared to be working, I assumed, and assume, they were. Won't be able to check this for a few days as I am on the road.
Maybe you are looking for
-
I have a Seagate 2TB external hard drive with 3 partitions, one for Snow Leopard - my computer has Lion. I cannot seem to boot from this hard drive but I could yesterday. Any ideas?
-
Hi guys. I have a requirement to create a BOL document for print. The BOL document data mostly comes from the shipment document. SAPFORMS will be used to design the layout. The BOL document is to be printed manually on a customized screen. User would
-
Why do no tabs appear in Workspace when Approval Container is selected?
I have a process that needs to use the Approval Container UI and I'd like to add some attachments to the form but they don't show up when the user opens the task in the Workspace. According to the Workspace Help at http://help.adobe.com/en_US/livecy
-
Adobe Premiere Trial version "banner"
How do you remove the banner from a completed video product? I downloaded the 30-day trial version and the "banner" runs right through the video I edited.
-
How do you post a Garageband tune on the Internet (also how do you email it
Please bear with a neophyte on how to do this (see title). I did send it to Itunes, but found nothing in Itunes to either post it or send it in an email. Thanks much!!