Shared storage client timed out error

Hello everybody, please help
I have been at this now for about 2 days and still can't find out the source of my issue using FCP to render a project through compressor to multiple macs using Qmaster.
What is happening is that I start the render and it gets sent to the second computer, I can see the prosessor ramping up then after (+-) 30 seconds I get the error bellow, and the render fails.
Here is my set up:
MacBook1 as the cluster controller
Macbook2 as the service node
connected via a gigabyte switch using an ethernet cable
The error I keep getting is this ("Macintosh-7" is the name of MacBook1, "chikako-komatsus-computer" is the name of MacBook2):
3x HOST [chikako-komatsus-computer.local] Shared storage client timed out while subscribing to "nfs://Macintosh-7.local/Volumes/portable/Cluster_scratch/4AD40699-B5BD6A1A/sha red"
The volume mentioned above in the error is a shared Fire wire drive connected to the MacBook1. It is have full read and write privileges to everyone. This drive is where the project file and all the source video are located. MacBook1 via the Qmaster system preferences is pointing to a folder "Cluster_scratch" on this drive.
I have been mounting this drive from macBook2 using the connect to sever option in the finder under Go menu. This method seems to only enable me to connect to this drive using AFP, is this my problem?
I have "allowed all incoming traffic" of the fire wall on the MacBook1
What is funny (not really) is that i can Compress a previously compiled video with the cluster If I don't go thou Final Cut Pro!
Any help with this would be greatly appreciated.
Thanks

I also administer a managed cluster with 6 machines, and have been using it successfully for almost a year now. But the only encoding that is submitted is directly through Compressor, never via FCP.
With QMaster, it sees a Quickcluster and a managed cluster the same way. While they are set up differently, the principle is the same, QMaster only sees services.
Exporting out of FCP to any cluster has always been slow. If you want to harness the power of distributed encoding, you could export a Quicktime reference file and take that into Compressor to be submitted to the cluster for encoding.

Similar Messages

  • "Shared storage client timed out' error when starting a batch

    I'm getting this error on every node in the cluster. What am I doing wrong?

    I also administer a managed cluster with 6 machines, and have been using it successfully for almost a year now. But the only encoding that is submitted is directly through Compressor, never via FCP.
    With QMaster, it sees a Quickcluster and a managed cluster the same way. While they are set up differently, the principle is the same, QMaster only sees services.
    Exporting out of FCP to any cluster has always been slow. If you want to harness the power of distributed encoding, you could export a Quicktime reference file and take that into Compressor to be submitted to the cluster for encoding.

  • Qmaster error: shared storage client timed out while subscribing to...

    Here's my Qmaster setup:
    computer 1: CONTROLLER, no nodes
    - 8TB RAID hooked up via Fiber
    - connected to the GigE network switch via a 6-port bond
    - cluster storage set to a path on the RAID
    computers 2, 3, 4, 5: RENDER NODES
    - each computer has a 2-port bonded connection with the GigE switch
    computer 6: Client, with FCS2 installed.
    - connected with a single GigE link
    I have set up this cluster primarily for command-line renders, and it works great. I submit command-line renders from the client computer, which get distributed and executed on each node. The command line renders specify a source file on the RAID, and a destination path on the RAID. Everything works great.
    I run into trouble when trying to use Compressor with this same setup. The files are on the RAID, and all my computers have an NFS automount that puts it in the /Volumes folder on each computer.
    I set up my Compressor job and submit it to the cluster. It submits sucessfully, and distributes the work. After a few seconds, each node gives me a timeout error:
    "Shared storage client timed out while subscribing to [computer1.local/path to cluster storage]"
    Is this a bandwidth issue? Command line renders work fine, I can render 16 simultaneous Quicktimes to the RAID over NFS. I don't see much network activity on any of the computers when it's trying to start the Compressor render, it's as if it's not even trying to connect.
    If I submit the SAME compressor job to a cluster with nodes ONLY on the controller computer, it renders fine. Clearly the networked nodes are having trouble connecting to the share for some reason.
    Does anybody have any ideas? I have tried almost everything to get this to work. Hooking up each node locally to the RAID is NOT an option unfortunately.

    WELL I DO NOW!
    Thanks. it's taken 6th months and several paid 'professionals' and then you come in here...swinging your minimalist genius. one line. one single line. and its done.
    if you are in london, lets lift a beer or five together.
    thank you sir. thankyou!

  • NWBC cProjects business client link Timed Out error

    Hi All,
    I Work in cProjects 5.0 through NWBC Business Client link via Internet Explorer (6.0.3).
    once I save the project after any activity, I get below error
    500 Connection timed out
    Error: -5
    Version: 7200
    Component: ICM
    Date/Time: Fri Dec 23 14:24:37 2011 
    Module: icxxthr_mt.c
    Line: 4295
    Server: sai7801x_I76_20
    Error Tag: {-}
    Detail: Connection to partner timed out after 60s
    my development system does not have this issue,
    please some one help me to fix this
    many thanks in advance
    yasar

    Hi,
    Please check this thread:
    /thread/361761 [original link is broken]
    You need to adjust the profile parameter icm/keep_alive_timeout via RZ10.
    Regards,
    Srikishan

  • "ORA-12535:TNS:operation timed out" error

    hi,
    I want to connect to my oracle server.If I try to connect my client means"ORA-12535:TNS:operation timed out" error is shown.What should i do to the rectify this problem.Pls give me a solution.
    Thanks in advance.
    -reg
    Lakshman.

    We are using wiondows XP and oracle 8i.
    I am able to ping the host where the database resides.
    this problem occurs only when we try to connect this server form the client.I able to connect other servers without any problem.
    I able to establish local connections.
    I am trying tnsping database service.
    client and the server are in same LAN only.
    Pls give me a solution.
    Thanks in advance.
    -regs,
    Lakshman.

  • Samba and fusesmb: "connection timed out" error

    Hello to everyone!
    I'm facing a weird problem here: since a couple of days I cannot use fusesmb anymore: I can still "see" the SMB network shares that are present on my LAN, but as soon as I try to enter one of those I get a "connection timed out" error.
    First of all I tried to reinstall fusesmb, to no avail. Then I tried to use smbclient directly:
    [tudhalyas@paranor ~]$ smbclient -L <my_windows_box_IP>
    This command correctly shows the list of shares that are present on my winXP box, and
    [tudhalyas@paranor ~]$ smbclient \\\\<my_windows_box_IP>\\SharedDocs
    creating lame upcase table
    creating lame lowcase table
    Enter tudhalyas's password:
    Domain=[WINBOX] OS=[Windows 5.1] Server=[Windows 2000 LAN Manager]
    smb: \>
    allows me to go into the "Shared Docs" folder of the said computer. From here I can flawlessly download files from the share.
    Reading this thread I thought that samba 3.5.1 could be the culprit, and so I compiled samba 3.4.7 through ABS and then installed it. Sadly, fusesmb still doesn't work. I even tried to use smbnetfs, but again to no avail.
    Does anyone of you know what I could do to address this issue? Thanks in advance!

    bump... can anybody help me please?
    Last edited by Tudhalyas (2010-05-05 18:58:47)

  • Read Timed Out Error

    Hai,
    I write one webservice retrieve the data from maxdb.
    If the data is more than 3000 records, when i try to execute the webservice, it shows read timed out error.
    How to resolve this error.
    please help me.
    regards,

    Hi
    If you are using a webservice client then you can programatically in SEI The Service Endpoint Interface .
    Please find the example link in sap help where you set the timeout option
    client._setProperty("socketTimeout", "30000");
    http://help.sap.com/saphelp_nw04/helpdata/en/04/d2c60e78814516afe7811829f02725/content.htm
    hope this helps .please do not forget to reward points
    regards
    rajesh kr

  • ARP/RARP Timed out error during Jumpstart installation

    Hello
    Good day to you.
    One of my JS client machine throwing "ARP/RARP" Timed out error when I try to rebuild the box thro' Jumpstart installation.
    The box was earlier installed thro' Jumpstart method and was crashed recently so trying to rebuild it again.
    To make a note, my Jumpstart server (Boot, Install & Config - on same machine) and this client box are in different subnet.
    Looks the client machine broadcast not reaching the Jumpstart server or something to do with network config.
    After issuing "boot net - install" on ok prompt from the client machine, I am getting the above mentioned error - ARP/RARP Time out.
    Any thoughts?
    Thanks.

    The first step in traditional jumpstart is for the SPARC client to gather an IP address from the network via RARP.
    The messages indicate that it is not getting a response to this query.
    Some possible reasons:
    network not working properly
    No jumpstart/boot server on local subnet
    Jumpstart/boot server not configured for this client
    Darren

  • Connection Timed out error

    Hi
    I am facing a problem in Adding  Items to Shopping cart. When I am adding the item I am getting "Session Timed out error".
    The Flow of process is like this:
    Step1 : Login into CCM through Client 100 using url -<u><b>"http://ctsgvcsap1:8000/sap/bc/gui/sap/its/bbpstart?sap-system-login-basic_auth=X&sap-client-100&sap-language=EN"</b></u>
    Step2 : click on Shop
    Step3 :  Select CCMProcurment Catalog1
    Step4 : You loginto client 200 - to go into the CCM Client.
    Step5 : Click on any product. you will be lead to a screen as below.Click on the item and select the shopping cart icon
    Step6 : When we are adding the item to the shopping cart I am getting the error
    <b>Application Server Session Timed Out (-11)
       Version   : 6040
       Component : ICM
       Module    : icxxthr.c
       Line      : 1737
       Details   : Session Doesnot Exist
    </b>
    Please help me in this regard.
    Thanks in advance.
    Deepak

    see http://help.sap.com/saphelp_nw04/helpdata/en/18/2a7c7eedb1c74b8ee0bfa8dfdc3778/content.htm

  • Client Timed Out While Answering Challenge HELP please!

    ok, so i just added a WPA password to our airport extreem so my neighbor would stop using it. this worked, and for a second it seemed to be running good. now though when im on using bootcamp, running counter strike every time i try to join a server this error message comes up "Client Timed Out While Answering Challenge", and i have no clue why and its really ticking me off. The internet works fine on the windows side, and counter strike worked ok before i set the WPA passoword except real slow because of my neighbor using it. but no this error message is very annoying and if anyone knows how to get rid of it please help.

    Close itunes then
    Check your internet settings.
    Control Panel – Internet Options – Advanced
    Check SSL 3.0 and TLS 1.0
    Uncheck “Check for server certificate revocation (requires restart)”
    Click Apply
    Click Okay
    Open itunes and try again

  • TNS Timed out error when connecting from internet

    All,
    Apologies if I am missing something simple...
    I have set up a test 9i database on a Win 2003 Server, and I can connect to it fine from within my LAN. I am trying to connect to the same database from the internet, but am getting a TNS:Operation timed out error.
    I believe I have set everything up correctly:
    -Port Forwarding port 1521 on my simple Linksys router/firewall
    -TNSPing gives me a sub-second OK (from the internet)
    -I can get a TNS:listener could not resolve SERVICE_NAME error if I purposely screw up the service name in the tnsnames.ora file (proving, I think, that I can connect to the Listener from the outside internet)
    Am I missing something simple? Why can I ping the listener but not get a response when trying to connect to the database (database is working, I can connect from within my LAN)?
    Do I need to download and install the latest release for Win Server 2003?
    Thanks,
    Chris

    Thanks for your response, Michael..
    Is this something new in 9i? The reason I ask is that I swear that while working on another project last year I was able to set up a development 8i database in my home office and was able to allow my client hit this database from their own location (in Peru, via the internet) using a vb.net app that I had built. The only thing I did on my home router was to forward port 1521.
    If my memory is wrong or things have changed since then, then what other ports other than 1521 are used to connect? Security is not really an issue, as I am just trying to set up a test database in order to Q/A an application I'm building.
    Thanks in Advance,
    Chris

  • The client timed out waiting to connect to the Essbase Server using TCP/IP

    Hi,All
    When I deploy the HPCM application to essbase, i received the following message below in the log file hpm.log
    2009-02-20 13:34:50,389 [Thread-115] ERROR com.hyperion.profitability.business.mdb.deployment.cubegeneration.CubeGenerator: error setting measures dimension member properties
    com.hyperion.profitability.data.mdb.essbase.MDBException: Error setting member property share option to store_data for member: D0900SB
         at com.hyperion.profitability.data.mdb.essbase.MDBMember.setShareOption(MDBMember.java:413)
         at com.hyperion.profitability.business.mdb.deployment.cubegeneration.CubeGenerator.setMemberProperties(CubeGenerator.java:1232)
    Caused by: com.essbase.api.base.EssException: (1290001): Network Error [10061]: Unable To Connect To [hypeion:32776]. The client timed out waiting to connect to the Essbase Server using TCP/IP. Check your network connections. Also please make sure that Server and Port values are correct
         at com.essbase.server.framework.EssOrbPluginDirect.ex_olap(Unknown Source)
         at com.essbase.server.framework.EssOlapMetaDataService.ex_olap(Unknown Source)
    And the Essbase service is up.
    Pls help!
    Shen.

    If you are installing on Windows, there is a limitation in the default configuration of TCPIP. I wrote about it, and included the steps to fix it, on my blog at http://timtows-hyperion-blog.blogspot.com/2007/12/essbase-api-error-fix-geeky.html.
    Note the error number you reported is slightly different than what I write about in the blog, but I believe I have seen this error fixed by the blog steps..
    Tim Tow
    Applied OLAP, Inc

  • IR - Connection Issue to Essbase, client timed out

    Ref: essbase server problem
    Ref2: Unable to add Essbase Server from Administration Services
    I have the same problem as the posts above. There are no conclusions for above posts, does anyone here know how to fix this problem as it seems very common.
    In my situation, I'm sure essbase is setup well and everything ran well. I started using IR connecting to essbase and done about 10 reports.
    Until today, I am trying to test these reports by sending huge amount of data to Essbase.
    Then retrieving the problem below when downloading to results:
    Network error [10061]:unable to connect to [server c-noia-131 1423]
    the client timed out waiting to connect to analytic services agent using TCP/IP check your connections also make sure that server and port values are correct
    Any ideas how to solve this problem?

    Hey.
    Adapter unable to recorginise the Jar file you have deployed, Did you mentioned the JAR file in Provider.xml file ?
    Are you able to ping the DB2  server ?
    Cheers
    Agasthuri

  • Request timed out.- Error while opening a item in Blog

    Hi,
       We have a blog in our share point portal which was running properly before few days.
    We get Request Timed out error while opening an item in the blog. The list contains about        
       3500 items
    [HttpException (0x80004005): Request timed out.]
    We were able to create a new item but not able to view the item.
    When we check the server SQLSERVR.EXE takes more than 90% of the CPU Usage.
    Please let me know how to resolve this issue.
    Thanks,
    Vanitha

    Hi,
    According to your description, Please check the RAM allocated to your SQL server. MOSS server needs 2GB RAM
    to preform well. SQL requires 2GB RAM for optimum performance.
    Messages like this are mainly due to lack of RAM Allocation.
    Best Regards
    David Hu

  • Timed out error in SRM

    Hi
    I am working in SRM 5 and with support level 9.
    When the user try to type in lot of information manually in the Header or the Item text in the SRM PO and then try to save it, he gets the SRM timed out error. Looks like SRM doesn't treat the information being filled in header and item text field as system being active and ultimately gives a timed out error.
    Any suggestions to overcome this issue?
    Thanks a lot in advance.
    regards
    manoj

    Hi
    Please go through the threads as well ->
    Re: why can I not find Service BBPGLOBAL in TA SICF?
    Re: ITS Configuration
    Re: ITS_CANT_LOAD_INCLUDE in BBPstart service
    Re: ITS Template not found
    Re: Service Cannot be Reached
    Regards
    - Atul

Maybe you are looking for