SharePoint 2007 Content deployment Error: 'A folder with the name already exists.

Hi, In SharePoint 2007 one Content deployment job is failed with below error:
Content deployment job 'Remote import job for job with sourceID = some id' failed.The exception thrown was 'Microsoft.SharePoint.SPException' : 'A folder with the name PublishingImages/AEI-2014/Blue already exists.'
From last 3 days I am getting this error and previously this Job was running without any Error.
In Import Log file getting message: "FatalError: A folder with the name PublishingImages/sg-2015/yellow already exists."
Please tell me how to resolve the issue.

Hello,
It seems same folder exist in destination server that's why job is failing. You need to check destination server and remove the same name/GUID from site then try again.
See this technet for more info: (see "Conflicting content on source and destination" section)
http://technet.microsoft.com/en-us/library/dd795107%28v=office.12%29.aspx
Hemendra:Yesterday is just a memory,Tomorrow we may never see<br/> Please remember to mark the replies as answers if they help and unmark them if they provide no help

Similar Messages

Netca: "a listener with the name already exists" after bombing out

Installing a listener via netca on a CentOS 5 x64 11g RAC setup.
I had a typo in the $ORACLE_HOME shell variable in .bash_profile for the oracle user. This caused netca to bomb out with a series of 'file not found' and 'directory not found' errors. netca did not complete.
netca did, however, create listener LISTENER on port 1521 on both my nodes. There is no listener.ora file anywhere, due to the bad $ORACLE_HOME directory.
I'd like to delete this and start over so that netca completes normally.
I cannot use netca to delete listener LISTENER. The delete option is greyed out. I did reboot, and tried killing the tsnlsnr process.
crs_stat -p shows the following:
NAME=ora.rac1.LISTENER_RAC1.lsnr
TYPE=application
ACTION_SCRIPT=/u01/app/oracle/product/11.1.0/db_1/bin/racgwrap
ACTIVE_PLACEMENT=0
AUTO_START=1
CHECK_INTERVAL=600
DESCRIPTION=CRS application for listener on node
FAILOVER_DELAY=0
FAILURE_INTERVAL=0
FAILURE_THRESHOLD=0
HOSTING_MEMBERS=rac1
OPTIONAL_RESOURCES=
PLACEMENT=restricted
REQUIRED_RESOURCES=ora.rac1.vip
RESTART_ATTEMPTS=5
SCRIPT_TIMEOUT=600
START_TIMEOUT=600
STOP_TIMEOUT=600
UPTIME_THRESHOLD=7d
USR_ORA_ALERT_NAME=
USR_ORA_CHECK_TIMEOUT=0
USR_ORA_CONNECT_STR=/ as sysdba
USR_ORA_DEBUG=0
USR_ORA_DISCONNECT=false
USR_ORA_FLAGS=
USR_ORA_IF=
USR_ORA_INST_NOT_SHUTDOWN=
USR_ORA_LANG=
USR_ORA_NETMASK=
USR_ORA_OPEN_MODE=
USR_ORA_OPI=false
USR_ORA_PFILE=
USR_ORA_PRECONNECT=none
USR_ORA_SRV=
USR_ORA_START_TIMEOUT=0
USR_ORA_STOP_MODE=immediate
USR_ORA_STOP_TIMEOUT=0
USR_ORA_VIP=
My question...how do I delete this listener (and the one on rac2) so that I can re-install them correctly using netca?
Edited by: user611309 on Apr 21, 2009 12:12 PM

Hi,
the listener is still registered with Oracle Clusterware. This registration will stay regardless of the existence of listener.ora and related files. Thus, you need to get rid of the registration, if you want to do it from scratch (which may not be required, if the listener starts and stops correctly). However, from your Clusterware home, please, issue:
srvctl remove listener -h
Usage: srvctl remove listener -n <node_name> [-l <listener_name>]
-n <node> Node name
-l Display listener configuration
-h Print usage
Hope that helps. Thanks,
Markus

Create Folder with the name of expense report number in SHAREPOINT ?

Hi All,
iExpence - In expense report confirmation page. There is custom link.
Requirement
When user click on link, system should create folder with the name of expense report number in SHAREPOINT and copy copies of expense receipts in the created folder in SHAREPOINT.
Please suggest.
Thanks,

OAF no api as such for this kind of customization. Rather try developing some web service or something similar which can be invoked from the custom link to do the job.
--Shiv

A phantom folder with the name of a folder that held photos has appeared in my finders places list. I can't choose it to delete it. it won't move. It can't be found in a search. How can I choose it and delete it?

a phantom folder with the name of a folder that held photos has appeared in my finders>places list. I can't choose it to delete it. it won't move. It can't be found in a search. How can I choose it and delete it?

Can you drag it off holding down the CMD key?
Do a search for it with EasyFind (try different settings in "Operator")
http://www.devontechnologies.com/products/freeware/

Planning 9.3 Duplicate member error: An object with the name 0000 already e

Hi All
I have 5 dimensions in my Planning applications namesly, Company, State, Product, Entity and Account
Company hase members called 0000(default) and 1000, 1001 etc
I also want add my Entity default member as 0000, but when I tried to add the memeber in my entity dimension I'm getting the Error : An object with the name 0000 already exists: Please help me to fix this
Thanks in Advance

U won`t be able to add the duplicate item name to planning application untill it would be the 9.5 version.
By the way, NotPlanning App`s nothing like as scanty - they has already an option "Allow duplicate item names" in 9.3 version..

Spotlight/Finder can't find a file, yet when I search the timecapsule for they find it. If I try to restore the file I get "file with that name already exists...." What is wrong?

I was trying to find a file (iTunes Backup). When using finder/Spotlight they couldn't find the file.
I then opened up my timecapsule and searched for the file....tick-a-de-da it found it in yesterdays backup. I attempted to restore the file and got the prompt "A file with that name already exists in this location, would you like to keep both, replace the file or cancel the request.
So if the file is there why can't spotlight/finder find the file??
If it helps I get this from the terminal when checking if indexing was enabled.
$ mdutil -s -a
Indexing enabled.
/Volumes/Data:
2014-11-18 18:09:39.542 mdutil[1472:572531] Metadata.framework [Error]: mdsCopyStoreAttributes failed: (8) (os/kern) no access
No index.
/Volumes/Time Machine Backups:
Indexing and searching disabled.
/Volumes/Time Machine Backups/Backups.backupdb:
Indexing enabled.

Hi Danielle,
Is there any possibilty that some of your files (a VI or DLL?) have been moved, renamed, or deleted? Also, what version of LabVIEW are you using and are you using any .NET DLLs? Another option to consider would involve VISA or DAQmx property nodes. Are you using any of these property nodes in your code? Here is a KnowledgeBase article to describe more about the VISA and DAQmx property nodes in a source distribution:
Error Creating Source Distributions Involving rc Files: http://digital.ni.com/public.nsf/allkb/833BFD5E9CA0224886257584004DAA4C?OpenDocument
I hope this is able to help.
Anna L
Applications Engineer
National Instruments

A business partner with this name already exists - message 3501-1

My client can't create a new account, the company is using a chart of account with segmentation. The message error is : "A business partner with this name already exists - choose a differetn name for the account. [Message 3501-1]"
We are using SAP 2007A PL42 with SQL 2005
Does somedbody have the same problem?

Hi
Please answer couple of these question
Are you trying to create a new Business Partner Master Data ? Or Are you trying to create a new G/L Account in Finance module .
Have you had that business partner before and was deleted ?
Hope this will help to narrow down
Bishal

Problem with copying to external drives 10.8.3 "the operation can't be completed because an item with the name .ds_store exists"

After upgrading from 10.7.5 to 10.8.3 I cannot copy certain folders to any external drive. the operation can't be completed because an item with the name .ds_store exists. I have seen this problem in discussions for many years with no real solution. Does anyone have a resolution? Please help. This is very frustrating as I work in two locations and copy folders back in forth all the time.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, or by a peripheral device.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

File Error: A file of this name already exists

im using Final Cut Pro 5.1.4 and whenever I tried to export a sequence using compressor, I get that error message "File Error: A file of this name already exists". I tried reinstalling the program, nothing. What can I do to fix that?

Sounds like you already have a file by that name located in the place you want to export to. Try changing the name of your new file.
b

The application could not be installed because an application with that name already exists at the s

The application could not be installed because an application with that name already exists at the selected installation location. Try installing to a different location.

1. I am trying to install: Adobe - Download free trial version
AdobeAcrobat
XI Pro <http://www.adobe.com/go/tryacrobatpro/>
Operating system: Windows 7
Current software: see attachment
<Removed by Moderator>

File name replaced with Tilde (~), name already exists error

When exporting jpg files in Lightroom 4 I've recently had an issue with some of the files containing a tilde (~), the 43rd file in the series often gets it as well as a few others. So in the series one might be named 43-MA~1.jpg instead of the 43-Maegan-details.jpg that I originally named the file.
When I've tried to rename these files from the finder I get the error "name already exists". If I rename it to something totally different it works but if I then try to rename it the original filename I wanted it gives me the error again or reverts to the name with the ~.
I'm running 10.6.8, and the problem has been happening the past few weeks but I've never had the problem before. I can't figure out what is causing the problem and it's not every export but it's a huge hassle to try and rename the files.

This is the one error message that I have gotten in years with Encore. In my case, I had created a Project to be used as a "template," and had done the layout, Imported the common Assets, and then used this as the basis for a 17 DVD set, just Importing the unique Assets to each. Everything went perfectly, until disc 15. Maybe I was sloppy, as I had just completed 14 such Projects that day, but when I went to Build, I got that error. I tried un-Linking and re-Linking Assets, and checked all Menus. Nothing - just that error. Flushed Media Cache, and only the error. I posted here, with the details and asking for ideas.
In the meantime, I just grabbed my "template" Project and Imported those same, unique Assets. Used my altered Menus from bad Project and did my linking, exactly (or so I thought) as I had just done. This time, the Build was successful and # 15 thru 17 went without a hitch.
I had Saved that bad Project, and several folk offered suggestions. I tried them all, but never could get it to Build. I always got that error. I finally gave up testing and chalked it up to OE on my part, but I never figured out what I had done wrong, as I really thought that it was by the numbers.
Based on my experience, I would just start a new Project, being careful in the workflow. That was the only thing that worked for me.
Good luck,
Hunt

How to create a folder with the name = date (e.g. "20030512") with LV6.0

hi,
i want to create folders with the name = date automaticly.
i found several solutions here, but all in LV6.1. could somebody give me an example in LV6.0 ?
I tried it with "get date-string" but that date-string has "." in it :-(
6.1-example :
here

Hope this will help!
ian.f
Ian F
Since LabVIEW 5.1... 7.1.1... 2009, 2010
依恩与LabVIEW
LVVILIB.blogspot.com
Attachments:
folder_create_2003.vi ‏66 KB

Program related ENHANCEMENT-POINT/SECTION with the name LMEPOF8D_02 exists

Hello
In an upgrade, after finishing with the SPAU task we got the following error in the standard object LMEPOF8D:
A program related ENHANCEMENT-POINT/SECTION with the name "LMEPOF8D_02" already exists.
Anyone knows which cause could be generate this kind of error?
Thanks in advance for your help
Best Regards,
Leonardo

Hello Sandra,
We have finished with SPAU. Regarding LMEPOF8D include, we kept with the ECC6 standard code. Therefore, from a point of view of code, it should be ok. However, we have this sintax error.
As you said, the include contains the enhancement point LMEPOF8D_02 which generates the sintax error, but we couldn't find if this enhancement is used in another place.
We also found note 1331844 and tried to fix the issue by using the 2nd solution propose in the note. But, it didn't work neither.
Do you have any idea about what cause could generates this error?
Thanks in advance for your support.
Best Regards,
Leonardo

BI Platform: Parameter object with the name "URL_PARAM"... does not exist

Hi,
I'm facing this issue with only one dashboard in BI4 Platform. When trying to view it through the BI Launch Pad, I get the following error:
"Parameter object with the name "URL_PARAM" and the index "0" still does not exist in the parameter 1[...]".
I've seen this thread where a similar thing was reported with NetWeaver platform.
My client as well as server versions are Release 1.4 SP0 Patch2 (14.0.5).
Also, although some of the pictures referenced in the dashboard are not in the Public Folders on BI4. Could it be that it's not able to reference the images and hence not be displaying the whole dashboard?
Please let me know if anyone has a solution to this.
Thanks!
- Sakshi Dhakad

Hi,
So here are the versions we currently have:
SAP BO Design Studio (64 bit) - 14.1.0
SAP BO Design Studio 1.4 for BI Platform - 14.1.0.349
And on checking on Central Management Console, I get this:
SAP BO BI Platform 4.1 Support Pack 5 Patch 2
Version: 14.1.5.1568
Also, I'm not sure if I installed an add-on or the patch. Based on these versions, could you tell me how to fix the issue ?
Thanks!

Error occurred in deployment step 'Add Solution': The definition specifies a claim provider with a name already in use.

Hi,
When i am trying to deploy sharepoint 2010 application in VS 2010, i am getting the below error:
"Error occurred in deployment step 'Add Solution': The definition specifies a claim provider with a name already in use."
How to fix this?
Thank you

You can use:
$provider = Get-SPClaimProvider | where {$_.DisplayName -eq "Provider DisplayName"}
$mgr = Get-SPClaimProviderManager
$mgr.ClaimProviders.Remove($prov)
$mgr.Update()
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

SharePoint 2007 Content deployment Error: 'A folder with the name already exists.

Similar Messages

Maybe you are looking for