Sharepoint 2010 and Unable to Open MS Office Files

Hello,
I have this annoying issue that I'm experiencing. My IE11 is unable to open *any* sharepoint files. I have to "download a copy", then "add document" in order for me to update files, pure annoyance.
This is just for one client.
Here's the stuff I've done so far
Change a new PC
Remove Office 2013 OEM and Install Office 2010 Standard (cannot open file)
Remove Office 2010 Standard and Install Office 2013 (cannot open file)
BasicAuthLevel registry (no go)
Disable all IE Plugins except Microsoft ones (no go)
Use IE x86 (no go)
Use IE10 (no go)
Use IE Tab on Firefox (no go)
Trust Center and Trust all Content (no go)
Delete Cache, reset Advanced Setting, "reset" (no go)
Uncheck "Autodetect" on LAN setting, then recheck (no go)
Add sharepoint to Trusted Sites (no go).
Use CCleaner to clean PC, then reinstall Office (no go)
Uninstall all other office product except 2013 Office. Remove Sharepoint component via Repair, then re-add (no go)
I've Binged and tested many solutions and unable to find it. I use fiddler to see what stuff is being passed back and forth.
The file is 100kb. If I use "download a copy", its downloaded right away. However, if I open with Sharepoint, it takes forever, then eventually give me this error (see attached).
Please advise. I've seen odd issue, but never this one where I cannot Bing it.

Hi Samir,
For troubleshooting your issue, you can take steps as below:
1.Make sure you are using IE 32bit.
2.Go to Internet Options>Advanced tab, uncheck "Do not save encrypted files to disk".
3.Delete the Office File Cache:http://www.addictivetips.com/windows-tips/office-2010-fix-office-document-cache-error/
4.Fixing SharePoint Office Integration Problems:http://thechriskent.com/2012/03/02/fixing-sharepoint-office-integration-problems/
Best Regards,
Eric
Eric Tao
TechNet Community Support

Similar Messages

  • Unable to open all office files

    I unable to open any ms office word and excel files, its showing files are corrupted.

    Hi,
    Does it only happen to Word and Excel? What about other Office applications, like PowerPoint?
    Please first try to launch Word and Excel in safe mode: Press Win + R and type "winword /safe" or "Excel /safe"in the blank box, then press
    Enter.
    Click File->Open to open the file and check result, this will help to determine if any add-ins caused the issue.
    You might want to repair your Office from Control Panel, the installation might be corrupted. For steps on how to do this, please check this article:
    http://office.microsoft.com/en-us/outlook-help/repair-office-programs-HA010357402.aspx
    Hope this helps, please feel free to post back.
    Thanks,
    Ethan Hua CHN
    TechNet Community Support

  • Ms Office Document On SharePoint 2010 library does not Open and stays on downloading

    Ms office documents on a sharePoint 2010 library does not open in client and stays on
    downloading... and never opens. This hapeens to Documents more than 2 or 3 Mb. That would be great if u cuold help me, Thanks
     

    Hi,
    This is a quick note to let you know that I am trying to involve someone familiar with this topic to further look at this issue.
    Max Meng
    TechNet Community Support

  • "This form cannot be opened in a web browser. to open this form use microsoft infopath" while adding a new Approval - Sharepoint 2010 and Publishing Approval workflow.

    I am trying to add a new workflow to a document library with the below mentioned settings and getting error saying "This form cannot be opened in a web browser. to open this form use microsoft infopath" while adding a new Approval - Sharepoint
    2010 and  Publishing Approval workflow" . For your information the I have checked the server default option to open in browser.
    Versioning Settings.
    Error
    This is quiet urgent issue . Any help would be really helpful.. Thanks.. 

    Hi Marlene,
    Thank you very much for your suggestions.
    But I am not creating a custom workflow in designer as Laura has mentioned. I am instead trying to create a new Out of the box Approval Workflow and I get the error mentioned above.
    As it works in other environment, I tried figuring out the possible differences which can lead to this error.
    Today I found one difference which is there are no form Templates within Infopath Configurations in Central Admin. Now I am trying to figure out what makes this form templates to be added to the template gallery.
    Regards,
    Vineeth

  • Integration between InfoPath web forms (browser side), SharePoint 2010, and Word or Excel

    To begin with the end in mind, here's what I need to do:
    User A (employee) fills out infopath form in browser.
    User A saves infopath form, workflow runs, and sends a link to the manager
    User B (Manager) opens infopath form, clicks a button, and all the information from the saved infopath form magically appears in a excel document
    Here's how I did it, because I couldn't find an easier way to do it. This is an InfoPath no-code solution (uses web service and workflow I had to build) and this is working somewhat:
    In InfoPath Designer 2010, created the form from Blank 2007 form template.
    Published the form and promoted fields to Sharepoint 2007 as a new forms library.
    Created a view on forms library to show all fields (SQLExportView1).
    Created SSIS package to import data from SharePoint forms list using the view "SQLExportView1" into a new database and table in SQL Server (tblSQLExport1).
    Created SQL Agent job to run this package every 2 minutes.
    Created workflow to notify manager.
    Created excel document with an external data connection to SQL server.
    In SQL, created a stored proceedure ("spGetCurrentID") to truncate, then add a row to a table ("tblCurrentFormID").
    On InfoPath form, added a button that takes the current infopath form "ID" into a table in SQL server by calling the stored procedure via a web service.
    On Infopath form, added a hyperlink to the excel file which opens in the client.
    In excel, added a button on the workbook that queries the SQL database for the current form ID, and drops it into a cell.
    In excel, added a button on the workbook that queries the SQL database for the sharepoint list details that were exported via SSIS, returning only the row for the current form ID.
    In excel, created a button on the workbook that displays the fields I want in the location I want
    With over 25 users concurrently hitting the form library, there is a chance that when they open excel they will generate an excel document with bad data in it (data from someone else's current ID).
    I've since migrated to SharePoint 2010, and it works the exact same way in 2010.
    What I want to do is find a way to get the data that is already saved in the infopath form DIRECTLY to Excel by clicking a button without the web service, the stored procedure, the SSIS package, the SQL agent job, etc.  My problem has always been
    in getting the data from infopath into RAM/Clipboard/temp file(?) and imported into Excel by bypassing the SQL.
    Of course, I would like to do this without requiring an administrator approved template in InfoPath, and have it be much more simpler to maintain. There are a lot of moving parts.
    Please point me to any examples or make recommendations. The requirement is that users open the form, the data is filled out already, and with a click of a button, the data shows up in excel automatically in the right place for the item they're currently
    looking at in infopath.
    Now that I've got this working (kind of) for one excel document, management wants to add 25 other documents that this one infopath form can generate. 
    Therefore, once I get this to work better for one excel document, I can add other excel documents.
    I've considered passing a parameter to the excel document in Excel Web Services, as I believe that excel web services 2010 can support this. However, I believe that the macros that run in the excel client okay won't work in excel web services 2010.
    Users would prefer to open Excel in the client, though, so not sure I'm going to go down this path.

    Clayton,
    You rock - thank you for all your responses!
    The infopath form was built doing what it does long before the need to get the data into Excel.
    You are correct in that I could have modified the infopath code to save to SQL, but the fields in the form and on the forms library columns do change before and after the manager approves it.  As such, adding some code to submit the infopath data to
    SQL could have been used to write data into SQL server instead of leveraging SSIS/SQL Agent to do so. However the aformentioned workflow (see way up in the thread) does more than just send an email to the manager with a link. It also edits some fields in the
    forms library column on that particular list item. By using SSIS, every two minutes they get the latest stuff from sharepoint into SQL without having to add code in the workflow or - if possible - on the infopath code that does a table update where item=abc.
    It is common to get data from sharepoint into sql, regardless of whether or not it is a list or library (including infopath forms libraries). There is sample code on Codeplex that has been downloaded close to 40,000 times for this purpose which I'm sure
    you are familiar with:
    http://msdn.microsoft.com/en-us/library/dd365137(v=sql.100).aspx and
    http://sqlsrvintegrationsrv.codeplex.com/releases/view/17652
    I agree with you in so many ways on why they should not be using excel (or word) to present the information. Having InfoPath or a custom workflow magically convert the data presented on a specific view in a filled out InfoPath form to PDF and emailing it
    would be wonderful, but it simply is not a possible solution.
    Surely you're familiar with companies that have a word document that, say, a manager will email to someone as an attachment, then the employee prints out the word document, fills it out on paper and signs it with a pen (or fills out a fillable form, then
    prints it), they then either fax it back or scan it and email it back to the manager, who then prints it out and hands it to a VP for a signature, etc.  Yes, the process is very old-fashioned, but in health care, finance, and for legal compliance reasons,
    some places simply have to do their manual processes the way they are. I've suggested and shown examples of how it can all be done electronically with digital signatures, etc., but their legal compliance officers and board members do not agree to this methodology.
    As such, I work within the confines I am presented with, as I'm sure you've had to do as well.
    I myself have worked for several Fortune 100 firms for many years (Microsoft, T-Mobile, etc), know what is possible. However the place I am at now, many of those options simply are not possible.
    They use excel (and word) because that is the templates the legal department and third party companies they work with gives them to work with. 
    If you've used enterprise OCR systems (LaserFiche, OnBase, Hyperion, etc.) you would be familiar with the fact that in order to scan and index keywords from OCR cover pages, the document has to have fields in a certain location. While I have tried to
    get the InfoPath form to line up properly, I cannot print out headers or footers and page breaks where the OCR system requires and expects them to be. What's more: when you print a filled out infopath form that loads browser side, as you know you get the browser-related
    stuff with it. Although they're all on the same web browser (finally - IE8) and all on windows 7 and office 2010, I cannot control the fact that some users use large fonts and other accessability features to make their 21" screens run at 640x480 (exaggeration).
    When you do this, it changes the margins in the print area, and more.
    If I could take the data that is in infopath, merge it with an excel template, and export that to PDF, that could be an option. Not looking to buy some enterprise PDF generating product, though, and looking to do this as close to a no-code solution as possible.
    Why we're suggesting PDF, perhaps we should be considering XPS, since we are staying with the Microsoft technology stack here.
    Perhaps I should rephrase my original question like this:  "I have 25 different documents that all need to be filled out automatically. Each document has different text on it, but the fields that need to be filled out on the documents are almost all
    the same. I want to present one form for users to fill out, and once saved, to generate all 25 different documents. How would you do this?". While not entirely accurate, as not all 25 documents need to be created at once, only on demand with a click of a button
    for each document, perhaps that is a better way of stating the need.
    Thank you Clayton (and all you lurkers out there hoping to find out how we solve this).

  • I saved a word file onto my imac.  when i go to open file in documents with pages the file is grey and unable to open.  the workable files are highlighted in bold.  is there a way to open this file????

    i saved a word file onto my imac.  when i go to open file in documents with pages the file is grey and unable to open.  the workable files are highlighted in bold.  is there a way to open this file????

    THis is safe for Mac's? Sorry, I have just never heard of this site before.
    And there are literally tens of thousands of sites of which I've not heard, too. Not this one.
    It's legit. There are lots of links in Apple Support Communities to the LibreOffice web site, as well as others that are legitimate open-source developers of options to buying MS Office, such as NeoOffice and OpenOffice. I have Open Office installed on one of my older Macs that can't run Office 2011 and it is rock-solid.
    I've been here too long to start posting bogus urls now.

  • Unable to open microsoft office

    I am unable to open Microsoft office at all. I restored my system yesterday and it worked. shut down and logged on today the same issue. I show that an update was done last night so I am checking here first b/f I call microsoft.

    How is this related to Firefox, or any Mozilla product?
    It sounds like what you need to do is repair your Microsoft Office installation, then check Windows Update for any updates again.
    * http://office.microsoft.com/en-us/access-help/repair-office-programs-HA010357402.aspx

  • How to enable the SharePoint 2010 and 2013 Developer Dashboard for specific WebApplication or Sitecollection?

    How to enable the SharePoint 2010 and 2013 Developer Dashboard for specific Web Application or Site collection(not for all Web Application)?
    Vishal Goyal

    Hi Vishal,
    I don't think there is option for specific site collection or web application,but there is option of enabling developer dashboard on specific master pages and that is one on of the way you could do it.
    look article on below link to enable developer dashboard on specific master pages
    https://msdn.microsoft.com/en-us/library/office/ff512745%28v=office.14%29.aspx?f=255&MSPPError=-2147217396
    Let me know if this helps.
    Thanks
    Bhism 

  • I'm unable to open my Office Word for Mac. The message say's check with developer to make sure Microsoft Word works with this version of Mac OS X.

    I'm unable to open my Office Word for Mac. The message say's check with developer to make sure Microsoft Word works with this version of Mac OS X.
    Orginally I downloaded OFFICE from the Apple Store App, so unable to reinstall as it suggest.

    Which version of Office, 2004, 2008 or 2011
    and
    MS Office is not available from the App Store, so where did you get it?

  • SharePoint 2010 and Outlook Integration

    Hi All:
    I have a question about SharePoint 2010 and Outlook Integration, My Question is:
    How can I develop a webpart which can open my client Outlook Client Application??
    Thanks ...
    Will

    Hi Tim, 
    Depending on what you want to achieve, you can use EWS (Exchange Web Services) to manage email on an Exchange mailbox.
    I blogged about adding and removing appointments from an Outlook calendar using EWS here: http://matthewyarlett.blogspot.com.au/2012/07/using-ews-exchange-web-services-in.html
    Regards, Matthew
    MCPD | MCITP
    My Blog
    View
    Matthew Yarlett's profile
    See my webpart on the TechNet Gallery that allows administrative users to upload, crop and format user profile photos. Check it out here:
    Upload and Crop User Profile Photos

  • Can anyone help with Ibook previously downloaded on ipad now somehow sitting in icloud and unable to open in IBOOK. it is greyed out.

    Can anyone help with Ibook previously downloaded on ipad now somehow sitting in icloud and unable to open on ipad . it is greyed out.

    I Have this problem as well on my iPad using ios8. I found it only happened after I downloaded the some free books from the bookstore. I have tried to reset all settings but nothing seems to have worked. any ideas??

  • Slipstream SharePoint 2010 and Project Server Installation

    Hello, 
    I have my current farm environment with the below configuration 
    SharePoint 2010 + Project Server which are on SP 2 + Brazil Language Pack
    2 WFE
    2 App
    1 SQL
    We are planning to add more WFE and App server in the existing farm. As per my research I found that we can slipstream CU and language pack install. 
    Would like to know can I slipstream SP2010 + Project server with SP2 along with Brazil language pack in one single go. I did found the article http://social.technet.microsoft.com/Forums/en-US/c6f60e5e-4f07-4e92-a8de-a32924b00ce5/sharepoint-2010-and-project-server-2010-slipstream-install?forum=sharepointadminprevious
    however in this case there was request to setup a new farm but I'm trying to add new server to the existing farm. 
    Can you please suggest the best approach that can be followed to save time to add the new server to the existing farm using slipstream. 
    Thanks. 

    You can do the same per the old thread. Just install SharePoint server, cancel config wizard, install Project Server, cancel config wizard, install LPK, then start Config Wizard and join to farm.
    Trevor Seward
    Follow or contact me at...
    &nbsp&nbsp
    This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

  • I have updated Adobe AIR and unable to open previous applications Getting Error

    I have updated Adobe AIR and unable to open previouly instalkled applications which works on adobe AIR.
    While updating the application iam getting an ERROR # 16824 and iam unable to run the software as well.
    iam not a coder, so plz help me reactify the issue: URGENT

    What application are you having problems with?  Can you uninstall the AIR update and reinstall an older version (AIR 4 or 13) located here:  Archived Adobe AIR SDK versions

  • Unable to update CC Illustrator 2014 and unable to open uninstaller in new imac

    unable to update CC Illustrator 2014 and unable to open uninstaller in new imac. Any suggestions?

    This worked, thank you.
     Jeffrey
      From: kglad <[email protected]>
    To: Jeffrey Jenkins <[email protected]>
    Sent: Saturday, March 21, 2015 12:33 PM
    Subject:  unable to update CC Illustrator 2014 and unable to open uninstaller in new imac
    unable to update CC Illustrator 2014 and unable to open uninstaller in new imac
    created by kglad in Downloading, Installing, Setting Up - View the full discussionupdate by downloading the files directly and then applying them: http://prodesigntools.com/adobe-cc-2014-updates-links-windows.html If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7324349#7324349 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7324349#7324349 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"  Start a new discussion in Downloading, Installing, Setting Up by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

  • HT3967 I have a new MacBook Pro and need to know what I need to do to open Microsoft Office files so that I can work on them?

    I have a new MacBook Pro and need to know what I need to do to open Microsoft Office files?

    Use a product such as OpenOffice, LibreOffice, Google Docs, iWork, or Microsoft Office 2008 or newer. In the case of Word documents, you can also use TextEdit.
    (82026)

Maybe you are looking for

  • I am connected to my remote server and "put files" but the web page files do not update, whats going on?

    I really can't figure this out: So I use a different computer at school for web design, I bought Dreamweaver to work on it at home, I get the files fine from the server that I uploaded at school but then I make changes at home computer and connect an

  • Desktop Publisher Scheduled Report Limits

    Post Author: bicknell CA Forum: crystalreports.com Using the crystalreports.com desktop publisher, a customer scheduled the upload of 80+ reports to crystalreports.com on a dailybasis.  Some of the jobs were failing and others seemed like they were b

  • PS icons show instead of photo thumbnails on Picture Viewer

    I've loaded CS3 on a new laptop---Windows 7.  CS3 Bridge and Photoshop work great, however the thumbnails show the PS icon instead of the photo in picture viewer.  I'm sure I'm missing a file or have one in the wrong location.  Any idea how to repair

  • Group Mail Management on Wiki

    We have a Wiki setup for one of our groups. It so happens this is also a mail group and we have enabled mail on the Wiki/Blog page. Mail that comes in for the group (for example: "[email protected]") gets posted on the mail for the Wiki. This is actu

  • Mac OS 10.5.8 + Directory Tool - Not there??

    Am attempting to add my Mac to my domain.  Have read severa lthreads indicating I would perform the needed steps using the Directory Tool.  for some reason, I am unable to locate this tool on my Mac.  As an Administrator, I click System Preferences >