SharePoint 2013 Apps shows 404 page not found on web front end servers.

Hi All,
We are implementing SharePoint Apps for our UAT environment with 1 application server and 2 WFEs. In our development server which is single server worked for implementing SharePoint Apps.
All our web applications WFEs are hosted UAT environment and SharePoint Server 2013 is enterprise with this build number 15.0.4420.1017 (RTM). In the Application Server we enabled App management service and Subscription management through
PowerShell.
This DNS configuration is as follows:
contoso.com with IP address for Application server (192.168.10.12) 2 different IP address for WFEs
192.168.10.14/15).
contoso-apps.com for wild card DNS required by SharePoint Apps and pointed to
Application server (192.168.10.12).
We have created self-sign certificate on one the WFE server, create a web application dedicated for SharePoint Apps
without host header and bind the self – sign certificate to the SharePoint Apps web application. DNS is correctly configured on the WFE and we are able to
ping abc.contoso-apps.com.
The App Catalog site is working and we are able to download SharePoint apps. But for the WFEs, when go to SharePoint store
it does shows the content for Store and when download an app and click on Add IT and signed as Office ID we get 404 page not found.
We referred the following sites that relate this 404 error:
http://blogs.technet.com/b/sharepoint_-_inside_the_lines/archive/2013/06/23/404-amp-401-errors-with-the-app-management-service.aspx
http://sharepointchick.com/archive/0001/01/01/setting-up-your-app-domain-for-sharepoint-2013.aspx
http://absolute-sharepoint.com/2013/02/troubleshooting-setting-up-an-environment-for-apps-for-sharepoint-2013.html
http://www.jeremythake.com/2013/12/troubleshooting-sharepoint-2013-hosted-apps-on-premises-404-not-found-error/
https://samlman.wordpress.com/2015/03/01/planning-the-infrastructure-required-for-the-new-app-model-in-sharepoint-2013/
But in my case we have already defined a blank host header for SharePoint Apps that we create previously.
Is it because we not using latest patch as Steve Peschka that March PU fixed this issue?
Any other solution we should look to fix this.
Any suggestions would be greatly appreciated.
Sandy

Your contoso-apps.com
wildcard address should point to one of the WFE servers, not the Application server. (Actually it should point to the load balancer for the WFEs, but you don't mention a load balancer.) Apps generate a dynamic HTML web site on the WFE server. If
you point to the application server it may not be able to deliver that content if the Microsoft SharePoint Foundation Web Service isn't turned on. (That's what makes a server a WFE)
Paul Stork SharePoint Server MVP
Principal Architect: Blue Chip Consulting Group
Blog: http://dontpapanic.com/blog
Twitter: Follow @pstork
Please remember to mark your question as "answered" if this solves your problem.

Similar Messages

Exchange 2013 RPC URL shows Error 404 Page Not Found

Hi,
I have been told by Barracuda Support to verify my Exchange 2013 RPC url is working correctly using the following address in a Web Browser:
https://RoH server address/rpc
When I hit this URL I input my credentials and get a Error 404 - Page Not Found.
I dont have any issues with Outlook Anywhere and clients are working fine. The tests come from this article and I am wondering if they are still valid for Exchange 2013 so need some help:
https://techlib.barracuda.com/BMA/EnableRoH
Does anyone else get the 404 error when they try the RPC virtual directory? If I got rpc/rpcproxy.dll that works fine and no issues.
We have Outlook Anywhere configured for NTLM authentication so maybe this is an issue and should be Basic?

I did some digging in the CAS RPC logs and I found this connection attempt:
<snip>
2014-06-18T15:22:40.902Z,CAS-SERVER,RpcHttp,"S:Stage=EndRequest;S:UserName=domain\admin;S:OutlookSessionId=""{1A731432-5548-402F-892A-C9FE489BB78D}"";S:AuthType=Basic;S:Status=404 Not Found;S:HttpVerb=RPC_IN_DATA;S:UriQueryString=?pdc.domain.local:593;S:RequestId=7b1e355e-6448-4ed4-8112-8ab13d88a76f;S:ClientIp=192.168.0.17"
</snip>
As you can see the 404 Not Found is for the request to /rpc. I am wondering if maybe this has changed in Exchange 2013 SP1? Or have I got a bigger issue here?

404 page not found in one sub link of SharePoint Site

We have an SharePoint 2010 Farm (a single farm), it was disconnected by accidentally, I reconnected it successfully through config wizard, but as I tested each site in the farm, and found one of links on a site was gave 404 page not found error. The
site (http://xxx:200/default.aspx) is working and other links on this site are working only one link is showing 404 error, I've checked
1) Eventview, nothing related
2) SharePoint Log, nothing related,
3) IIS, running fine since the site is up,
4) checked at CA, site collection and web application are all good.
Where else I should check?
Any help would greatly appreciated.

which link is throwing the error, could you please mentioned that?
Do you have any custom /farm solution deployed into the farm, if yes make sure the solution is sucessfully deployed.
Also make sure if there is any customization which required to that page , still there.
Try to detach the content DB and reattach it.
also try to reset IIS.
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

HTTP 404 page not found error

Hi all,
I am getting HTTP 404 Page not found error when I try to run the test_fwktutorial.jsp. I have followed the instructions of a similar thread but none have helped.
Kindly suggest me some solution to this problem.
Thanks,
Priya

I did a simple search for 404 in the forum and got at least 10 threads, I think this thread is relevant to you, please try the solution suggested in the thread
HTTP 404 Not Found error in JDeveloper 10.1.3.3.0 for Oracle Apps R12
"Hi,
Problem I faced:
When I try to run, test_fwktutorial.jsp in JDev 10.1.3.3.0 for Oracle Apps R12, I was getting the first page with the links, but when i click on any of the links, say "Hello World", I am getting a "HTTP 404 Not Found". Same error I got by directly running any of the tutorial pages, or any custom pages. CHecked all the normal setting options like: responsibility key, username/pwds etc.
Then I noticed in my address bar an error text:"You have insufficient privileges for the current operation".
Solution I arrived at:
In one of the forums, I had come across the point that maybe my local machine and Application server were on different domains, due to which I was getting "You have insufficient privileges for the current operation".
1. Hence I checked for the domain on which my local machine was in:
My Computer -> Properties -> Computer Name.
2. There it was showing WORKGROUP instead of Domain.
3. Here I clicked on the Change button and entered mycompany domain on which the server was like <companyidentier1>.<companyidentier2>.com
I had to do this even though the machine i was using was connected to the domain using a VPN connection.
4. Then after restarting my machine, I changed the Embedded OC4J Server Preferences to Default Local IP Address. And when i ran my page, it worked!!
Before when I had not changed the domain of my local machine to the Apps Server domain, simply changing the Embedded OC4J Server Preferences to Default Local IP Address (as suggested in some forums), still gave me the same error.
Hope this helps others facing similar problems.
Thanks
"

Wwv_flow.accept, error 404 page not found

I am trying to install the OEHR Sample Objects for the Hosted Demo environment at apex.oracle.com site so I can do the Oracle Application Express 2 Day + Tutorial. I downloaded the zip file and got the .sql file extracted ok. The import works ok for the application, but hangs when trying to load the Supporting Objects. It eventually gives me that nasty old error 404 page not found when on MS windows 2000 and IEexplorer 6 ( and a similar result in xp using IEexplorer 7).
I cannot do much in the tutorial without the samples.
Any ideas, anyone else gotten stuck here? Thanks

Dimitri,
Many thanks for the reply.
The problem appears to be intermittent and can happen on, quite literally, any link or button. Anything which causes either a page submit or link through to another page is a likely candidate. And this isn't just whilst running the app - it's within the app design part, too. It seems to be an issue (possibly) with page delivery.
My gut feeling is that it seems to happen more after the DB has been up for a while. However, this may just be a matter of perception as I've also had it happen within minutes of a DB restart.
I'll have a play around with apex.oracle.com, but my suspicion is that the Oracle site works fine (this would be a far more visible error if it happened on apex.oracle.com, too).
One thought is that it might be an EPG config issue - it'd be interesting to check the config of an Oracle-supplied Apex area, if that were possible. Another thought is that it could be the network, though (typically) everything else on the network appears to be running fine...
Many thanks,
David

Integration Directory : getting 404 Page not found error while accessing In

Hello,
When i am trying to open the Interation Directory, it is showing me 404 Page not found Error.
Some Description
- Executing sxmb_ifr,
- From http://erpsys07:50300/rep/start/index.jsp,i am getting mentioned error when i am trying to access Integration Directory from URL.
erpsys07 -> Central SLD -> J2ee Port - 50100
erpsys07 -> PI system -> J2ee Port - 50300
When i am clicking on integration directory link, it is pointing to Central SLD J2ee Port (50100) instead of 50300, it is pointing to
http://erpsys07:50100/dir/start/sso/Directory.jsp instead of http://erpsys0750300/dir/start/sso/Directory.jsp.
Could some help me where to change and what to change?
Thanks,
V.SINGH

Have you checked port in Netweaver Administration?
See which port is mentioned there. (If you are using PI 7.1)
Check in SXMB_ADM transaction, and in your RFC Destination, where it is pointing.
Thanks,
Hetal
Edited by: hetal shah on Nov 24, 2009 4:49 PM

Every once in a while my Firefox just jumps to Yahoo! and displays Yahoo! 404 - Page Not Found handler

When I type in a URL in the address bar, for example http://www.LinkedIn.com sometimes I am forced to Yahoo!.com and an error is displayed:
Yahoo! 404 Page not found
Sorry, the page you were looking for could not be found
Showing related results for: http://websearch.ask.com/redirect?client=ff&src=kw&tb=FW...

Under "Tools" on your Firefox browser, select Add-Ons. On the Add-Ons page, select the Extensions tab. Scroll through the list until you find the Yahoo toolbar add-on. Disable, and then remove the add-on. I've had no problems since I did this earlier this evening. Easy fix!

Http 404 Page Not Found in 10.1.3

I installed 10.1.3 and am going through a Faces tutorial, but when I try to run it, I get a 404 page not found error. Is there some configuration of the OC4J embedded server that I need to do? I've been using the 10.1.2 and I don't recall having to have made any changes.

I tried creating a new project from scratch. JSF with 2 pages, one text output and one command button, return success and go to next page, about as simple as I could think to try. I get the same 'Page not found' error on this project as well. Also, when I create the first JSF page, the property inspector doesn't display any JSF components, even though the libraries were selected, until I exit and restart JDev. Then they show.
Are there any known configuration issues with the OC4J? Should I just de-install/re-install JDev 10.1.3 all together?

404 (Page Not Found) Error! Changes not Appearing on webpage

Made changes in IWeb. However, these changes are not showing up on safari AND I am receiving a 404 (Page Not Found) Error! Help!! I have tried everything to resolve this

Where do you publish your site and how do you upload the files?
What is the URL of your site?

404 Page Not Found from the Page Definition

Version 1.6
I'm trying to run my app by clicking on the stop light on the Page Definition screen and I'm now getting a 404 Page Not Found error. There is NO entry in the Apache Error log, however, there is an entry in the Access log which is:
htmldb_public_user [03/Oct/2005:15:02:52 -0500] "GET /pls/htmldb/f?p=110:1:4702644663970887147::::: HTTP/1.1" 404 326
Obviously, the 404 is the Page Not Found code, but what is the 326?
Can someone help with this?
Thanks,
Joe

Sorry forgot to add back the details.
Note: 295550.1 Says its still around in 10.1.0.3 but not 10gR2.
Symptoms
After ugrading database to 9.2.0.6 : GET /pls/htmldb/wwv_flow.accept HTTP-404 ORA-06502
WHEN CONNECTING TO HTMLDB
Cause
This problem was reported in Bug 4015165 10.1.0.3 PLSQL 10.1.2.0.0 PRODID-11 PORTID-453
Abstract: REGRN:SCALAR VARCHAR2 IN BINDS WITH DIFFERENT SIZE RANDOMLY FAILS WITH ORA-6502
Solution
Install the following patch from metalink Patch 4015165.

Applying changes to report queries results in HTML 404 page not found

Hello,
When I try to change report queries (especially by using multiple queries) I frequently get HTML 404 page not found.
This happens when I click Apply Changes after I edited the query, but also quite often just when I try to confirm the changes in the query.
When I logout and then login again, after a few tries, I finally succeed.
The problem of HTML 404 page not found appears quite a few times, even when I try to delete a query or to open one for editing
Can anyone help me out here? It is really frustrating any development of reports with APEX
I'm using APEX version 3.1.2.00.02 with Oracle XE

Where do you publish your site and how do you upload the files?
What is the URL of your site?

Custom 404 Page Not Found, can't get it to work...

Environment: 1 CF webserver, 2 websites on the webserver
(www.example1.com,www.example2.com)
Problem: I want to create a custom 404 page not found for
each site.
I can't use the "Site-wide Error Handler " in the CF
administor because it makes the 2 sites share the same 404
template. I've also tryed to set the IIS Custom Error properties
but when i do that I still get the ColdFusion defined (not my
custom page) 404 message. Help.. I'm sure there is a way to do this
some how... Thx

Forgot to mention, the 2 sites are in seperate folders.
Thanks

Have published iweb site for five years with no problems and just opened a new site and get - 404: Page not found This error is generated when there was no web page with the name you specified at the web site.-is the problem with iweb or with hosting? T

I am sorry if thie is republished-My first time doing this and I am not sure what goes where and where to hear feedback.
Have published iweb site for five years with no problems and just opened a new site and get -
404: Page not found
This error is generated when there was no web page with the name you specified at the web site.-
Troubleshooting suggestions:
Ensure the page you are linking to exists in the correct folder.
Check your file name for case sensitivity . Index.htm is not the same as index.htm!
Temporarily disable any rewrite rules by renaming your .htaccess file if it exists
is the problem with
iweb or with hosting?
One Apple tech started to fix Iweb and had to end session and the next said problem with hosting at Network Solutions as it published
to local folder. NWS has checked sttting a few times-
Any help would be extremely appreciated as trying to fix this for about five weeks
Thanks VG
<Email Edited by Host>

It's a really bad idea to post your email address - it's an invitation to spam - and I've asked the Hosts to remove it. (Even though I've now noticed you mis-spelled it! - anyway, never post your address in a forum.)
You have a site here: http://virginiagordon.com/www.virginiagordon.com/WELCOME.html
If that's not the page you are having trouble with, what is that page's URL?

Assigning a Muse Template to the 404 Page Not Found page

I recently create a template for my blog by doing the following:
I created a template in Muse
I added the tag {tag_pagecontent} to a page in Muse and assigned the page to the template.
I then uploaded that page to Business Catalyst.
BC looked at the page I created in Muse as a template. I'm assuming this is because it had the {tag_pagecontent} tag.
I then assigned the page to the blog and everything worked perfectly.
Now I would like to assign the main template on my web site to the 404 Page Not Found page so that the pages are consistent. How can I do this?
How can I get BC to recognize a page created in Muse as a BC template? Or simply, how can I assign a template created in Muse to the 404 pages without adding a {tag_pagecontent} or similar tage in Muse? I currently do not see any of the templates I created in Muse as an option to select.

Hi Rick,
In order to access all the menu items on BC, kindly follow the below steps:-
1)On the BC dashboard, expand the dropdown on the top right side that has your name.
2)Select 'My details'
3)Scroll down and check 'Enable online content editing' check box.
4)Save the details.
5)It will ask for the password, enter it and click continue.
6)Check the site manager menu again. It should have all the submenus.
Regards,
Neha

Ent 9 - Can't run mgmt console - admin.cwr gives Error 404: page not found

Post Author: Alan Weiner
CA Forum: Deployment
We just did a fresh install of Crystal Enterprise 9. When we try to run the Management console, we get an "Error 404: page not found"
http://wdcwfc80/crystal/enterprise9/admin/en/admin.cwr
Error 404: The page cannot be found

Post Author: Alan Weiner
CA Forum: Deployment
From the server (although, it uses a browser to connect)
colin mackenzie:
Hi Alan Weiner.
Do you get this message when you run this from the server? or just the workstation / client browser?

SharePoint 2013 Apps shows 404 page not found on web front end servers.

Similar Messages

Maybe you are looking for