Sharepoint 2013 Workflow not available on Site created from Sharepoint 2013 Foundation Solution Template

If I create a template on SharePoint 2013 Foundation, then create a site on SharePoint Enterprise (or Office/365) fully configured to support SharePoint 2013 workflows. When I access the site through SharePoint Designer 2013, and attempt to create a workflow
SharePoint 2013 Workflows are not available -- you get message that SharePoint 2013 Workflow platform is not available because it is not configured on the server. This appears to be a bug in SharePoint Designer as the 2013 Workflows are available on the team
site on the same site collection. There is no reason that a site created from a SharePoint 2013 foundation template should have this restriction.   To make matters worse if you then save that site as a template on the SharePoint 2013 Enterprise (or
Office/365) system and create a new site from the that template you get the same issue.
Anyone know a workaround/fix to this issue.   Have imported the template into Visual Studio but I can not find any way in Visual Studio to enable SharePoint 2013 workflows.   A solution that involves Visual Studio import would work fine
for me.
Earllibby

Apparently you did not read my question very carefully.   The workflow manager is configured properly on this server and for the basic Team site in this site collection the full SharePoint 2013 workflows are available in SharePoint Designer 2013.  
BUT they are not available on another site in the SAME SITE COLLECTION that was created from a solution template that was created on a SharePoint Foundation server.
Earllibby

Similar Messages

  • Task Expiry in Workflow 2013 is not available

    Hi,
    I'm using Designer Workflow 2013, in that i need to Start a Task process. In that there is no option for Task Expiry i can find only Due Date.
    In Workflow 2010 there is an option for Task Expiry so if the task is not responded within specified amount of time i can able to perform some operation then it will continue with the workflow. But in Workflow 2013 there is no option for Task Expiry.
    Any help will be highly appreciated.
    Thanks,
    Ahamed

    Hi Ahamed,
    I still recommend to use SharePoint 2010 workflow instead.
    If you want to use 2013 workflow, I recommend to create another workflow and use retention policy to start the workflow when the due date expires.
    The workflow can be created like the image below(as only due date needs to be changed, we can update the due date and send notification with the task URL to the user):
    Thanks,
    Victoria
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Victoria Xia
    TechNet Community Support

  • Issue with list saving data after sites upgrade from sharepoint 2010 to sharepoint 2013

    Issue with list saving data after sites upgrade from sharepoint 2010 to sharepoint 2013 
    Newform.aspx of list:-
    Custom List is not saving data sometimes in the new form after 15 minutes and only blank entry record got created without saving data, even though some columns are mandatory fields?

    Hello dcakumar,
    Sounds like a strang issue. If you can reproduce this can you see some errors in the ULS logs?
    - Dennis | Netherlands | Blog |
    Twitter

  • SharePoint Online workflow not starting

    Hi All,
    I am an administrator for a company and I have been asked to create a workflow for them.
    I created 2 workflows using SharePoint designer 2013. The 2010 workflow works as expected.
    I created the 2013 workflow because I can use loops. However the 2013 workflow doesn't automatically start when an item is created. but works if I start it manually. I have checked and made sure that the check box is ticked for the workflow to start automatically.
    The workflows go like this.
    Step: Query Type
     If Current Item:Query_Type equals Phone
      Set Status to Opportunity
     Else
     If Current Item:Query_Type equals Email
      Email Current Item:Sales_Rep2
      Pause for 0 days, 0 hours, 15 minutes
      If Current Item:Follow_Up equals No
       Email Current Item:Sales_Rep2
    Step: Rental or Not
     If Current Item:Rental equals Yes
      Email Current Item:Sales_Rep2
      Pause for 0 days, 1 hours, 0 minutes
      If Current Item:Quote_Sent equals No
       Email Current Item:Sales_Rep2
      Else
      If Current Item:Rental equals No
       Email Current Item:Sales_Rep2
       Pause until Current Item:Date to Send Quote
       Email Current Item:Sales_Rep2
    And the 2013 one goes like this
    Stage:Follow Up
     Loop: Email to manager
      The contents of this loop will run repeatedly while: Current Item:Follow_Up equals No
       Pause for 0 days, 1 hours, 0 minutes
       If Current Item:Follow_Up equals No
        Email Current Item:Manager
     If Current Item:Follow_Up equals Yes
      Set Status to Opportunity
    Transition to stage
     Go to Rental or Not
    Stage:Rental or Not
     Loop: Escalation
      The contents of this loop will run repeatedly while: Current Item:Quote_Sent equals No
       Pause for 2 days, 0 hours, 0 minutes
       If Current Item:Quote_Sent equals No
        Email Current Item:Manager
     Loop: Escalation
      The contents of this loop will run repeatedly while: Current Item:Quote_Sent equals No
       Pause for 7 days, 0 hours, 0 minutes
       If Current Item:Quote_Sent equals No
       and Current Item:Date to Send Quote is greater than Current Item:Date to Send Quote
        Email Current Item:Manager
    Transition to stage
     Go to End of Workflow
    If this makes sense? If not can anybody give me advice on how to get this working the way it is expected to work?

    Hi,
    From your description, After you modified the workflow and added "App Step" to it and "Pause" actions apart from few other modifications, you got the issue that
    SharePoint 2013 Workflow not starting when a new item is crated.
    Whether you got the issue Before you modified the workflow.
    I have done a test in my SharePoint 2013 and it works fine.
    I suggest you update SharePoint to the latest CU.
    Here is an blog similar with your issue, you can use as a reference:
    http://blogs.msdn.com/b/sridhara/archive/2014/08/19/fix-sharepoint-2013-workflow-recursion-prevention-part-1.aspx
    Best Regards,
    Lisa Chen
    Lisa Chen
    TechNet Community Support

  • Wifi is not available where I come from. I have broadband connection where data transmission is through cell sites then to USB modem connected to a computer. The modem draws power from the computer. Will this setup work with the ipad?

    Wifi is not available where I come from. I have broadband connection where data transmission is through cell sites then to USB modem connected to a computer. The modem draws power from the computer. Will this setup work with the ipad?

    iPad requires Wifi (or 3G /LTE) to connect to the Internet. You cannot connect a USB modem to the iPad.
    You can create your own WiFi hotspot through your computer for your iPad to connect to, if your computer supports this functionality. All Wifi Macs and many Wifi PCs do. Check your computer manual for how to do it.

  • Can't delete a Site Collection from SharePoint admin center completely

    Hi All
    I'm using Office365. And I wanted to delete a Site Collection from SharePoint admin center.
    But at first, I couldn't delete it from there. So I opened the Site and delete it from the Site setting successfully.
    Then I went back to SharePoint admin center to check it was deleted or not completely.
    But the Site Collection was still on the Site Collections list.....
    Things I did are
    1. IE -> Tools->Internet Options-> In General Tab click on Delete in browsing history section and check all options and again click on delete.
    2. Close and re-open the browser and sign back in
    I wanna make free server resource to create new Site Collection.
    Does anyone know how to delete a Site Collection completely?

    Hi,
    Can you try delete the site collection using SharePoint online power shell command? Refer the following link for that.
    Delete site collection
    Also, while deleting site collection from Admin Center, do you get any warning?Or what are steps you follow to delete the Site Collection from Admin Center?
    Thanks,
    Avni Bhatt
    If this helped you resolve your issue, please mark it Answered

  • How to restore a site deleted from SharePoint Designer 2010

    Hi All,
         I have opened a test server site in share point designer 2010, & deleted that particular site in SP designer 2010,can anyone let me know how to restore the site by using SharePoint Designer?
    I followed below mentioned procedure to restore the site using SharePoint Designer
    Open SharePoint Designer, File tab, Sites under File Tab, Open site, specified the URL of site,opened..
    It is getting connected to the Organisation network & showing "path does not exist,check the path and try again".
    Whether, Is it possible to restore the site deleted from share point designer in site collection recycle bin. or
    Is it possible to copy the site from Production server to test server.
    Waiting for an response at the earlier.
    Thanks in Advance.
    Badri

    Hi Badri,
    1.You could not restore site deleted from SharePoint designer in site collection, you can only restore the site deleted from
    UI in site collection recycle bin, deleted from end user recycle bin.
    2.You can export the site from production server, then import it to test server.
    http://technet.microsoft.com/en-us/library/ff607895(v=office.14).aspx
    Best Regards.
    Kelly Chen
    TechNet Community Support

  • I have error while testing the system created from a sap business objects template in SAP portal

    I have error while testing the system created from a sap business objects template in SAP portal. Error text:
    com.sapportals.connector.connection.ConnectionFailedException: Connection Failed: A nested exception occurred. Could not initialize physical connection. Connection Failed: A nested exception occurred. Could not initialize physical connection. Connection Failed: A nested exception occurred. Could not create JCO connection. 'mshost' missing
    I configure integration SAP portal and SAP BW system. All system requirements are complied.
    Environment
    SAP Business Objects 4.0
    SAP BW 7.31
    1.     I configure SSSO between SAP BW and SAP Business Objects Enterprise 4.0
    2.     Next I setting integration SAP PORTAL with SAP BW system
    3.     I download certificate from portal. Select Certificates and key (http://sapserver:port/nwa) – See scren_
    4.     In next window selected Ticketkeystore and Saplogonticketpair-cert( near part window form)
    5. Select Export entry button and binary format file certificate for download. Press download.
    6.     Save certificate file in local PC folder
    In next step need export certificate file to SAP system. Sequence of step:
    1.       Run STRUSTSS02 transaction .
    2.       Chose certificate ->import.
    3.       Select downloaded certificate file
    4.       Select Add to certificate list button and Add to ACL button
    5.       Inter System ID and Client(000)
    6.       In next I download iview sap business objects template into sap portal: System administration->transport->Import. And select and download sap business Objects iview template in .epa format into sap portal.
    7.       Result – downloaded iview.
    8.       In next step I create system from template. System administration->system landscape.
    9. In next step I input parameters for my system in Connector category, Sap business objects and user management categories: See screen _2
    10.   When I created the system and test the connection error occurred: See screen_3
    This issue is important enough. I would be grateful for opinions and ideas. Thanks in advance.

    Did you find a solution?

  • SharePoint 2013 Workflow Not Updating on Deployment

    Developing a 2013 Workflow on SharePoint 2013 using Visual Studio 2012, deploying workflow changes does not update the workflow that runs. This has already been posted on the SP 2013 dev forum, but I wanted to check here with the workflow folks. Anyone run
    into this issue before and/or have tips for solving?
    Thanks.
    http://social.msdn.microsoft.com/Forums/en-US/sharepointdevelopment/thread/cd543a00-f3ab-4a4a-8682-b81d8330b677
    http://blog.randomdust.com

    This issue is reported and I'll post about it once I have an update.  For now to workaround this issue, you can try these steps
    Change the default deployment option to “No Activation”
    Retract the solution using Visual Studio
    Deploy the solution. This time feature will not be activated by default as we have changed to “No Activation”
    Open the SharePoint designer and click on the “Workflow”  section. You will see your workflow already present there. Delete the workflow which you have created.
    Activate the feature manually.
    Now you should see your updated version.
    Chandrasekar Natarajan

  • SharePoint Designer 2013 -- Workflow Manager is required to create Workflow

    Hi,
    Is workflow manager is required to create workflow in SharePoint Designer 2013 for List Workflow. Is there any other alternative for this.
    With Regards,
    Jaskaran Singh Bhatti

    SharePoint 2013 supports both 2010 legacy type workflows that run in the OWS timer service on the SharePoint server and 2013 workflows that run on a server running Workflow Manager.  You can still create the same kind of workflows you created in SharePoint
    2010 without Workflow Manager.  That would include 2010 List Workflows.  You only need Workflow Manager if you want to create the newer kind of workflows that use Workflow Manager.  All the built-in workflows still use the 2010 legacy workflow
    system.  Both types of workflows can be created using SharePoint Designer 2013.
    Paul Stork SharePoint Server MVP
    Principal Architect: Blue Chip Consulting Group
    Blog: http://dontpapanic.com/blog
    Twitter: Follow @pstork
    Please remember to mark your question as "answered" if this solves your problem.

  • SharePoint 2013 Workflows not working

    Hi All,
    I am currently attempting to get SharePoint 2013 workflows working, i have installed the workflow manager and linked it to SharePoint but when i run any 2013 workflow i get the following error:
    RequestorId: 26c49394-eb06-737a-7fde-d5bbfe4f6505. Details: System.ApplicationException: HTTP 401 The remote server returned an
    error: (500) Internal Server Error. {"SPRequestGuid":["8c76bcc4-3979-41a9-ae18-7221aa418528"],"request-id":["8c76bcc4-3979-41a9-ae18-7221aa418528"],"X-FRAME-OPTIONS":["SAMEORIGIN"],"SPRequestDuration":["24"],"SPIisLatency":["0"],"Server":["Microsoft-IIS\/8.0"],"WWW-Authenticate":["Bearer
    realm=\"8de50181-fbf8-48a5-9cd6-5edb37403fbd\",client_id=\"00000003-0000-0ff1-ce00-000000000000\",trusted_issuers=\"00000005-0000-0000-c000-000000000000@*,[email protected]37403fbd\"","NTLM"],"X-Powered-By":["ASP.NET"],"MicrosoftSharePointTeamServices":["15.0.0.4569"],"X-Content-Type-Options":["nosniff"],"X-MS-InvokeApp":["1;
    RequireReadOnly"],"Date":["Thu, 04 Sep 2014 09:46:31 GMT"]} at Microsoft.Activities.Hosting.Runtime.Subroutine.SubroutineChild.Execute(CodeActivityContext context) at System.Activities.CodeActivity.InternalExecute(ActivityInstance
    instance, ActivityExecutor executor, BookmarkManager bookmarkManager) at System.Activities.Runtime.ActivityExecutor.ExecuteActivityWorkItem.ExecuteBody(ActivityExecutor executor, BookmarkManager bookmarkManager, Location resultLocation)
    Its worth noting that 2010 workflow run without a problem.
    Any help would be greatly appreciated 
    Thanks
    Jamie

    Hi,
    Based on your description, my understanding is that when you ran SharePoint 2013 workflow, an error occurred.
    You can try to re-register the Workflow Service.
    Here is
    a link about how to configure workflow for SharePoint Server 2013, you can use as a reference:
    http://technet.microsoft.com/en-us/library/jj658588(v=office.15).aspx
    Best Regards,
    Lisa Chen

  • SPD 2013 Workflow not working

    Hello,
    I'm running into a very interesting issue, we have a 2013 custom list that has some 2010 and 2013 workflows associated with it. Just until recently the workflows were working fine, but now only 2010 workflows are working. 
    I updated one of the 2013, tried to publish it  but then I canceled the process of publishing it because I had to make a new update.... not sure if this flipped the switch on these but now even if I create new ones in SPD they will not run. Also if
    I try to run in manually I get a message - "Something went wrong. To try again, reload the page and then start the workflow"(the option for start manually is enabled in SPD 2013). Any help on this will be greatly appreciated! 

    Hi Ghabib05,
    According to your description, my understanding is that you got an error when you ran a SharePoint 2013 workflow.
    Afer you made some change in your workflow, whether you re-published the workflow. if not, please publish it, then test again, compare the result.
    Please create a new SharePoint 2013 workflow on the list, then test, compare the result.
    If this issue only occurred on the specifical workflow, I suggest you create a new workflow instead of the problematic one.
    If this issue occurred on all SharePoint 2013 workflow, you can try to re-register workflow service.
    Best Regards,
    Wendy
    Wendy Li
    TechNet Community Support

  • 2013 Workflow not working for tenant admin

    Hi
    I've been struggling with an issue developing a site for a client. They have their own SharePoint 2013 tenancy, which we can manage as a partner. I can log in to the site with my own company account linked to Office 365, and can do everything I need to in
    terms of site administration.
    However, I've run into a problem whereby although I can create and publish SharePoint 2013 workflows, I cannot run them successfully. If there is anything in the workflow such as writing to the history list, the workflow hangs with the status "Started"
    and "Activity in progress" (no error message).
    I've got around the problem by testing the workflow as a user from our client's tenancy, but I'm curious as to why my user doesn't work for this. It works fine for everything else, including SharePoint 2010 workflows. Is there some permission somewhere that
    needs to be set, or is this by design?
    Duncan

    Hi Ganesh,
    Based on your description, I recommend you verify the things below:
    Check if the SharePoint search service account is added in the Windows Authorization Access Group in Active Directory.
    Check if the non-admin users have permission to view the results searched.
    Check if the inline search can work in lists’ pages or libraries’ pages.
    Best regards.
    Thanks
    Victoria Xia
    TechNet Community Support

  • ORA - 01034 : ORACLE NOT AVAILABLE  Error while creating new instance.

    I was trying to create new instance in unix environment. I have configured all my shell scripts to run and install but while performing the install I get the
    following error message and fails.
    ORA-01034: ORACLE not available
    I have previously installed an instance using same scripts but fails this time when I copy the scripts and modify them in new folder. Pointed out the path in the scripts correctly.
    I am a junior DBA and I would appriciate your help.

    Paste here scripts, your .profile (or environment variables according to Oracle) and your init.ora

  • Hyper -V Win 8 Pro, media option -add disk is not available on some created VM

    Hi,
    installed Hyper-V on Windows Pro 
    1.I created VM generation 2 with win2012 server eval.
    2.using sysprep to create clone
    3. created 3 copy of the file
    4.installed 3 machine from file (DC,node1,node2)
    4.on DC created domain
    5.joined node1 and node2 to domain
    6.created cluster
    When I was going to install SQL server from ISO to node1 and node2 I noticed that in media action option to attach disk is not available (it show no disk to display) on node1 and node2
    However on DC machine  I can attach ISO disk!
    Why option to attach disk is not available on other machine and how make it available?
    Currently I access disk from node1 and2  from domain using \\DC\D\setup.exe
    P.S
    few days ago I created 3 VM with Win2008R2 server (join then on domain and created cluster),add disk optiion availbale on all win2008R2 machines
    Thank you
    Alex

    Hi AlexMtl,
    Based on my knowledge , physical DVD only can be mapped to IDE controller in VM .
    "you can only assign the physical CD/DVD drive to one VM at the same time (running VM)."
    Similar thread :
    http://social.technet.microsoft.com/Forums/windowsserver/en-US/b4e68fe6-3a7e-46f0-b15d-c90790ff3f71/unable-to-access-cddvd-on-second-vm?forum=winserverhyperv
    Gen2 VM can add DVD device attach to SCSI controller and insert .ISO file (this file should be used by multiple VMs ). 
    Best Regards
    Elton Ji
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

Maybe you are looking for

  • Install Software HANA unable to read repository

    Hello, I'm new to Eclipse. I'm trying to get up the trial Cloud environment for SAP HANA. I have Eclipse Juno installed. When I attempt to do an install of the HANA software on top of Eclipse I receive error "Unable to read Repository". We do not use

  • SAP Workflow for vendor invoice is posting into past?

    Dear experts I have a heavy problems with the workflow for vendor invoices. The following example demonstrates it: I have created a vendor invoice on 1st of December 2011.The responsible person has checked and released this invoice on 3rd January 201

  • How to load 2 xml galleries in single function loop.

    how to load 2 xml galleries in single function loop. my function is-------- var myGalleryXML = new XML(); myGalleryXML.ignoreWhite = true; myGalleryXML.load("gallery.xml"); function callThumbs()     _root.createEmptyMovieClip("wall",_root.getNextHigh

  • BODS-Can I config Job server via commandline in WindowsXP

    Hi Experts, Can I config Job server via commandline? I need to create a new Job server [JS_TEST01/port3501] and add the repository to this Job server and restart Job server via command line. Thanks Miller

  • Problem while calling the user exit

    Hi All, In one of the program one user exit is called. Before this user exit ther is one FM . If I copy the same function module with a new name Z* , this user exit is not getting triggered. The program is going till the point where CALL CUSTOMER-FUN